Extracting vanadium from stone-coal by oxygen pressure acid leaching and solvent extraction

Vanadium extraction from stone-coal was investigated by oxygen pressure acid leaching and solvent extraction.The mineralogy of the stone-coal from Tongren City of Guizhou Province,China,was investigated by various determination methods. The effects of leaching time,leaching temperature,leaching agent concentration,leaching L/S ratio,granularity of material,additive consumption were investigated based on the mineralogy.The results show that under the conditions of leaching time of 3-4 h, temperature of 150℃,sulfuric acid consumption of 25%?30%,ratio of liquid to solid of 1.2:1,the granularity less than 0.074 mm, additive consumption of 3%-5%,and oxygen pressure of 1.2 MPa,and the vanadium leaching rate can be more than 92%by the method of two-step pressurized acid leaching.The powdery V2O5 product with 99.52%in V2O5 content is obtained by the flowsheet of acid recovery,removing iron by reduction process,solvent extraction,precipitating vanadium with ammonium water,and pyrolysis from the stone-coal oxygen pressure acid-leaching solution.The total recovery efficiency of vanadium is above 85%,which is more than 20%higher than that obtained in the conventional process.Furthermore,the new process does not cause air pollution since no HCl or Cl2 is released by calcination of the raw material.

Effect of ambient oxygen pressure on structural, optical and electrical properties of SnO_2 thin films

PolycrystaUine SnO2 thin films were deposited on sapphire substrates at 450℃ under different ambient oxygen pressures by pulsed laser deposition technique. The effect of ambient oxygen pressure on the structural, optical and electrical properties of SnO2 thin films was studied. X-my diffraction and Hall measurements show that increasing the ambient oxygen pressure can improve crystallization of the films and decrease resistivity of the films. A violet emission peak centered at 409 nm was observed from photoluminescence measurements for SnO2 films under deposition ambient oxygen pressure above 5 Pa, which is related to the improvement of crystalline of the films.

Influence of oxygen pressure on critical current density and magnetic flux pinning structures in YBa_2 Cu_3 O_(7-x) fabricated by chemical solution deposition

This paper studies the effect of oxygen partial pressure on the fabrication of YBa2Cu307-x films on （00/） LaAIO3 substrates by metalorganic deposition using trifluoroacetates （TFA-MOD）. As the oxygen partial pressure increases to 1500 Pa, a great increase in the superconducting properties is observed at high magnetic fields parallel to the YBCO c axis. The cross-sectional transmission electron microscope images show that a high density of stacking faults in the size range of 10-15 nm may act as flux pinning centres to enhance the critical current density of the YBCO films

Influence of Ambient Gas and Oxygen Pressure on Nd∶LuVO_4 Films Grown by Pulsed Laser Deposition

The （ 200 ） dominated Nd： LuVO4 films were fabricated successfully on polished SlOE under different ambient gases and different oxygen pressures. By XRD, it is shown that a film with good crystallization is deposited under oxygen and the optimal pressure is 20 Pa. The surface morphology of Nd：LuVO4 films was observed by AFM, and it is found that oxygen pressure influences the surface morphology of Nd ：LuVO4 films. The ratio of content of Nd：LuVO4 films was estimated according to the yields of Lu and V by using RBS spectra, this ratio is in good agreement with the target composition. The effective index refractive of every mode is 2.0044, 1.7098, measured by prism coupler method.

Analysis of Oxygen Consumption in Lead and Zinc Metallurgy

This article analyzes the role of oxygen in lead zinc metallurgy,including shortening the metallurgical process,promoting energy conservation and environmental protection,improving metallurgical strength,enhancing raw material adaptability,and enhancing comprehensive recovery efficiency.This article introduces different lead zinc metallurgical processes and their oxygen consumption characteristics,including oxygen enriched side blowing lead smelting,oxygen bottom blowing lead smelting,oxygen enriched top blowing lead smelting,flash smelting lead,oxygen pressure leaching zinc smelting,and atmospheric pressure oxygen leaching zinc smelting.It is pointed out that oxygen enhanced metallurgy is the direction for the transformation and upgrading of lead zinc metallurgy.

Oxidation of Fe-Cr-Ni Alloys in a Low Oxygen Partial Pressure Atmosphere to Mitigate Coke Formation

Anti-coking oxide films were prepared on a 25Cr35Ni and 35Cr45Ni alloy surface under the low oxygen partialpressure atmosphere of a H2-H2O mixture. The composition and phase structure of the oxide films were analyzed by energydispersive spectroscopy (EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The anti-cokingperformance of a mini tube made of a HP40 (25Cr35Ni) alloy was evaluated on a bench scale pyrolysis and coking test unit.The results showed that the surface Fe and Ni content decreased after the oxidation of the two alloys in a low oxygen partialpressure atmosphere. The oxide films were mainly composed of MnCr_(2)O_(4) and Cr_(2)O_(3). The average mass of coke in the minitube with oxide film decreased by 87% relative to that of a tube without an oxide film when the cracking temperature was 900℃. The ethylene, propylene, and butadiene yields in the pyrolysis tests were almost the same for the mini tubes withand without an oxide film. The oxide film on the alloy surface effectively inhibited catalytic filamentous coke formation.An industrial test showed that the run length of the cracking furnace with the in-situ coating technology was significantlyextended.

Selection of Oxygen Pressure in BOF Steelmaking

Based on the on-site investigation and the principle of compressible flow, the working oxygen pressure should be matched to the Mach-number at the nozzle in designing nozzle and oxygen supply schedule so that the higher penetration depth and the more blending energy can be obtained for reducing energy loss by shock wave in the ultrasonic oxygen jet in the normal BOF steelmaking. For some special BOF blowing technologies, such as steelmaking with high phosphorus hot metal, post combustion oxygen lance, hot metal pretreatment, etc, the difference between working oxygen pressure and designed diffusion pressure which is related to Mach-number is necessary, so that the velocity of the oxygen jet will be decreased because of shock wave for expected metallurgical results.

Recovery of gallium from zinc concentrate by pressure oxygen leaching

Zinc concentrate with high gallium content is one of the main resources of gallium.The gallium presents in the form of isomorphism in tetrahedron coordination with sulfur in sphalerite.The research was to investigate the amenability of zinc concentrate with high gallium to pressure oxygen leaching.The particle size,sulfuric acid concentration,oxygen partial pressure,additive amount,and time of reaction were studied.The extraction yields of gallium and zinc are 86%and 98%,respectively.The optimal condition is 100 g of zinc concentrate with particle size smaller than 38 lm,sulfuric acid concentration150 g L-1,leaching temperature 150℃,leaching time120 min,oxygen partial pressure 0.7 MPa,additive amount of 0.2 wt%.

The Effect of Oxygen Partial Pressure during Active Layer Deposition on Bias Stability of a-InGaZnO TFTs

The effect of oxygen partial pressure （Po2） during the channel layer deposition on bias stability of amorphous indium-gallium-zinc oxide （a-IGZO） thin film transistors （TFTs） is investigated. As Po2 increases from 10% to 30%, it is found that the device shows enhanced bias stress stability with significantly reduced threshold voltage drift under positive gate bias stress. Based on the x-ray photoelectron spectroscopy measurement, the concentration of oxygen vacancies （Or） within the a-IGZO layer is suppressed by increasing Po2. Meanwhile, the low-frequency noise analysis indicates that the average trap density near the channel/dielectric interface continuously drops with increasing Po2. Therefore, the improved interface quality with increasing Po2 during the channel layer deposition can be attributed to the reduction of interface Ov-related defects, which agrees with the enhanced bias stress stability of the a-IGZO TFTs.

Effect of Oxygen Partial Pressure on Epitaxial Growth and Properties of Laser-Ablated AZO Thin Films

Al-doped ZnO（AZO） thin films were grown on c-sapphire substrates by laser ablation under different oxygen partial pressures（P_（O2））.The effect of P_（O2） on the crystal structure,preferred orientation as well as the electrical and optical properties of the films was investigated.The structure characterizations indicated that the as-grown films were single-phased with a wurtzite ZnO structure,showing a significant c-axis orientation.The films were well crystallized and exhibited better crystallinity and denser texture when deposited at higher P_（O2）.At the optimum oxygen partial pressures of 10- 15 Pa,the AZO thin films were epitaxially grown on c-sapphire substrates with the（0001） plane parallel to the substrate surface,i e,the epitaxial relationship was AZO（000 1） // A1_2O_3（000 1）.With increasing P_（O2）,the value of Hall carrier mobility was increased remarkably while that of carrier concentration was decreased slightly,which led to an enhancement in electrical conductivity of the AZO thin films.All the films were highly transparent with an optical transmittance higher than 85%.

Efficacy of Huangma Ding or autologous platelet-rich gel for the diabetic lower extremity arterial disease patients with foot ulcers

BACKGROUND Diabetes foot is one of the most serious complications of diabetes and an important cause of death and disability,traditional treatment has poor efficacy and there is an urgent need to develop a practical treatment method.AIM To investigate whether Huangma Ding or autologous platelet-rich gel(APG)treatment would benefit diabetic lower extremity arterial disease(LEAD)patients with foot ulcers.METHODS A total of 155 diabetic LEAD patients with foot ulcers were enrolled and divided into three groups:Group A(62 patients;basal treatment),Group B(38 patients;basal treatment and APG),and Group C(55 patients;basal treatment and Huangma Ding).All patients underwent routine follow-up visits for six months.After follow-up,we calculated the changes in all variables from baseline and determined the differences between groups and the relationships between parameters.RESULTS The infection status of the three groups before treatment was the same.Procalcitonin(PCT)improved after APG and Huangma Ding treatment more than after traditional treatment and was significantly greater in Group C than in Group B.Logistic regression analysis revealed that PCT was positively correlated with total amputation,primary amputation,and minor amputation rates.The ankle-brachial pressure and the transcutaneous oxygen pressure in Groups B and C were greater than those in Group A.The major amputation rate,minor amputation rate,and total amputation times in Groups B and C were lower than those in Group A.CONCLUSION Our research indicated that diabetic foot ulcers(DFUs)lead to major amputation,minor amputation,and total amputation through local infection and poor microcirculation and macrocirculation.Huangma Ding and APG were effective attreating DFUs.The clinical efficacy of Huangma Ding was better than that of autologous platelet gel,which may be related to the better control of local infection by Huangma Ding.This finding suggested that in patients with DFUs combined with coinfection,controlling infection is as important as improving circulation.

Influence of moderate hypothermia on cerebral oxygenation in pigs with intracranial hypertension

BACKGROUND： Moderate hypothermia is one of the effective therapeutic methods for head injury in recent years, there are many mechanisms of moderate hypothermia for brain protection, and its influence on cerebral oxygenation is also one of them. OBJECTIVE： To observe the influence of moderate hypothermia on cerebral oxygenation of animals with acute intracranial hypertension, and further investigate the protective mechanism of moderate hypothermia. DESIGN： A randomized controlled trial. SETTING： Department of Neurosurgery, Renji Hospital affiliated to the Medical College of Shanghai Jiao Tong University. MATERIALS： Twenty healthy little pigs, either male or female, weighing 4.5-5.5 kg, were used. Neurotrend-typed multiparameter monitoring system （Diametrics Company, British）; CMA/100 micro-injection pump （Carnegie Company, Sweden）. METHODS： The experiment was conducted in the Changzheng Hospital affiliated to the Second Military Medical University of Chinese PLA in November, 2001. The pigs were randomized into two groups： the normothermia group （control group, n =10） and moderate hypothermia group （n =10）. ① Bilateral femoral arteries were separated, one was connected to pressometer for monitoring mean arterial pressure （MEP）, and the other for analysis of blood gases [including peripheral blood pH value, arterial partial pressure of carbon dioxide （PaCO2）, arterial partial pressure of carbon dioxide （PaCO2）, HCO3-]. ② Rectal temperature was monitored with mercurial thermometer. ③ Intracranial pressure was monitored using Camino optic ICP probe placed in the subdural space. ④ Neurotrend multiparameter monitoring sensor was inserted into the white matter for about 4 cm to determine cerebral perfusion pressure （CPP, CPP=MAP（ICP）, brain tissue partial oxygen pressure （PO2）, partial pressure of carbon dioxide （PCO2）, HCO3- and brain temperature. The rectal temperature of animals in the moderate hypothermia group was lowered to 34 ℃ using ice bags, and the body temperature was maintained at 33-35 ℃ for 2 hours. The changes of the parameters were observed continuously, and the pigs in the normothermia group were not treated with cooling. MAIN OUTCOME MEASURES： ① MAP, ICP, rectal temperature, CCP; Indexes of cerebral oxygenation detected with Neurotrend-typed multiparameter monitoring system; ② Results of blood gases analysis in the moderate hypothermia group. RESULTS： All the 20 pigs were involved in the analysis of results. ① MAP, ICP, rectal temperature, CCP and indexes of cerebral oxygenation： In the moderate hypothermia group, the ICP after cooling was obviously lower than that before cooling [（3.31±1.19）, （5.33±0.95） kPa, P 〈 0.05], CCP was higher, brain tissue PCO2 [（12.03±1.73）, （10.59±2.01） kPa, P 〈 0.05], and brain tissue pH value was higher [（7.03± 1.63）, （9.40±1.30） kPa, P 〈 0.05], whereas the brain temperature was decreased as compared with that before cooling [（34.9±0.3）, （37.2±0.2） ℃, P 〈 0.05]. ② Results of blood gases analysis in the moderate hypothermia group： There were no significant differences in the parameters of peripheral arterial blood gases analysis before and after cooling in the moderate hypothermia group （P 〉 0.05） CONCLUSION： Moderate hypothermia will not impair the cerebral oxygenation, and it can reduce brain tissue CO2 and decrease brain tissue acidosis.

Co-oxidation of arsenic(Ⅲ) and iron(Ⅱ) ions by pressurized oxygen in acidic solutions

The co-oxidation of As(Ⅲ) and Fe(Ⅱ) in acidic solutions by pressured oxygen was studied under an oxygen pressure between 0.5 and 2.0 MPa at a temperature of 150℃. It was confirmed that without Fe(Ⅱ) ions, As(Ⅲ) ions in the solutions are virtually non-oxidizable by pressured oxygen even at a temperature as high as 200℃ and an oxygen pressure up to 2.0 MPa. Fe(Ⅱ) ions in the solutions did have a catalysis effect on the oxidation of As(Ⅲ), possibly attributable to the production of such strong oxidants as hydroxyl free radicals (OH ) and Fe(Ⅳ) in the oxidation process of Fe(Ⅱ). The effects of such factors as the initial molar ratio of Fe(Ⅱ)/As(Ⅲ), initial pH value of the solution, oxygen pressure, and the addition of radical scavengers on the oxidation efficiencies of As(Ⅲ) and Fe(Ⅱ) were studied. It was found that the oxidation of As(Ⅲ) was limited in the co-oxidation process due to the accumulation of the As(Ⅲ) oxidation product, As(Ⅴ), in the solutions.

Study on Oxygen Supply and Protection of Bone Marrow in Acute Radiation injured Mice

After irradiated by & Gy 60Co γ-ray, mice were intraperitoneally injected immediately with 0.2 ml 100 % compound blood-activating soup twice a day for 10 days. The in situ ulnar bone marrow partial pressure of oxygen (PbO2) was determined in vivo before, during and after irradiation respectively. The bone marrow sections in the same part were observed. Our results showed that the normal murine ulnar PbO2 was 12.72±1. 05kpa. During irradiation, the level of PbO2 decreased to 10. 78±1. 17 kpa (P＜0. 001). And 3 days after irradiation, PbO2 decreased to 9. 75±0. 52 kpa, suggesting that the commonly used 'blood-activating and stasis-eliminating' Chinese drugs could promote the rehabilitation and proliferation of bone marrow microvessels in the acute radiation injured mice, expand their areas, increase the oxygen supply of bone marrow microenviroment, thereby leading to PbO2 much higher increase than that of control group. It is also helpful in the proliferation and rehabilitation of hematopoietic cells.

Effect of Oxygenates Blending with Gasoline to Improve Fuel Properties

The purpose of this paper is to study the effect of oxygenate additives into gasoline for the improvement of physicochemical properties of blends.Methyl Tertiary Butyl Ether（MTBE）,Methanol,Tertiary butyl alcohol（TBA）,and Tertiary amyl alcohol（TAA） blend into unleaded gasoline with various blended rates of 2.5%,5%,7.5%,10%,15%,and 20%.Physicochemical properties of blends are analyzed by the standard American Society of Testing and Materials（ASTM） methods.Methanol,TBA,and TAA increase density of the mixtures,but MTBE decreases density.The addition of oxygenates lead to a distortion of the base gasoline＇s distillation curves.The Reid vapor pressure（RVP） of gasoline is found to increase with the addition of the oxygenated compounds.All oxygenates improve both motor and research octane numbers.Among these four additives,TBA shows the best fuel properties.

EFFECT OF SHS PARAMETERS OF Ni0.35Zn0.65Fe2O4 FERRITE ON MAGNETIC PROPERTIES AND ESTABLISHMENT OF MATHEMATICAL MODEL

Ni0.35Zn0.65Fe2O4 ferrite was synthesized by SHS method. In the process of SHS, combustion temperature and velocity were the main process parameters , which were decided by the Fe content, grain size of the ferrite powder, relative density and the oxygen pressure. In this paper the effects of Fe content, grain size and oxygen pressure on combustion temperature and velocity were discussed. The relation between combustion temperature and magnetic permeability was also studied and the method of polynomial regression was used to establish the mathematical model of the relation.

Analysis of metabolic alterations in Arabidopsis following changes in the carbon dioxide and oxygen partial pressures

As sessile organisms,plants are subject to a multitude of environmental variations including several which directly affect their interaction with the atmosphere.Given the indiscriminant nature of Rubisco,the relative rates of photosynthesis and photorespiration are known to be responsive to changes in gas composition.However,comprehensive profiling methods have not yet been applied in order to characterize the wider consequences of these changes on primary metabolism in general.Moreover,although transcriptional profiling has revealed that a subset of photorespiratory enzymes are co-expressed,whether transcriptional responses play a role in short-term responses to atmospheric compositional changes remains unknown.To address these questions,plants Arabidopsis thaliana（Arabidopsis） ecotype Columbia（Col-O） grown under normal air conditions were transferred to different CO_2 and O_2 concentrations and characterized at the physiological,molecular,and metabolic levels following this transition.The results reveal alterations in the components,which are directly involved in,or supporting,photorespiration,including transcripts and metabolite levels.The results further highlight that the majority of the regulation of these pathways is not mediated at the level of transcription and that the photorespiratory pathway is essential also in conditions in which flux through the pathway is minimized,yet suggest that flux through this pathway is not mediated at the level of transcription.

Self-healing behavior of Ti_(2)AlC at a low oxygen partial pressure

Ti_(2)AlC,a MAX phase ceramic,has an attractive self-healing ability to restore performance via the oxidation-induced crack healing mechanism upon healing at high temperatures in air(high oxygen partial pressures).However,such healing ability to repair damages in vacuum or low oxygen partial pressure conditions remains unknown.Here,we report on the self-healing behavior of Ti_(2)AlC at a low oxygen partial pressure of about 1 Pa.The experimental results showed that the strength recovery depends on both healing temperature and time.After healing at 1400℃for 1–4 h,the healed samples exhibited the recovered strengths even exceeding the original strength of 375 MPa.The maximum recovered strength of~422 MPa was achieved in the healed Ti_(2)AlC sample after healing at 1400 for 4 h,about 13%higher than the original strength.Damages were healed by the formed℃TiCx from the decomposition of Ti_(2)AlC.The decomposition-induced crack healing as a new mechanism in the low oxygen partial pressure condition was disclosed for the MAX ceramics.The present study illustrates that key components made of Ti_(2)AlC can prolong their service life and keep their reliability during use at high temperatures in low oxygen partial pressures.