P-T-t Path of Mafic Granulite Metamorphism in Northern Tibet and Its Geodynamical Implications

Mafic granulites have been found as structural lenses within the huge thrust system outcropping about 10 km west of Nam Co of the northern Lhasa Terrane, Tibetan Plateau. Petrological evidence from these rocks indicates four distinct metamorphic assemblages. The early metamorphic assemblage (M1) is preserved only in the granulites and represented by plagioclase+hornblende inclusions within the cores of garnet porphyroblasts. The peak assemblage (M2) consists of garnet+clinopyroxene+hornblende+plagioclase in the mafic granulites. The peak metamorphism was followed by near-isothermal decompression (M3), which resulted in the development of hornblende+plagioclase symplectites surrounding embayed garnet porphyroblasts, and decompression-cooling (M4) is represented by minerals of hornblende+plagioclase recrystallized during mylonization. The peak (M2) P-T conditions of garnet+ clinopyroxene+plagioclase+hornblende were estimated at 769-905℃ and 0.86-1.02 GPa based on the geothermometers and geobarometers. The P-T conditions of plagioclase+hornblende symplectites (M3) were estimated at 720-800℃ and 0.55-0.68 GPa, and recrystallized hornblende+plagioclase (M4) at 594-708℃ and 0.26-0.47 GPa. It is impossible to estimate the P-T conditions of the early metamorphic assemblage (M1) because of the absence of modal minerals. The combination of petrographic textures, metamorphic reaction history, thermobarometric data and corresponding isotopic ages defines a clockwise near-isothermal decompression metamorphic path, suggesting that the mafic granulites had undergone initial crustal thickening, subsequent exhumation, and cooling and retrogression. This tectonothermal path is considered to record two major phases of collision which resulted in both the assemblage of Gondwanaland during the Pan-African orogeny at 531 Ma and the collision of the Qiangtang and Lhasa Terranes at 174 Ma, respectively.

The Microarea Composition of Garnet and Biotite from the Ji'an Group in Tonghua District and Its Significance as an Indicator of Metamorphic P-T-t Path

The garnet (Grt) and biotite (Bt) from gneisses of the Ji’ an Group are characterized by diffusion zoning at the rim, but equilibrium composition of metamorphic peak is usually remained in extensive interior area. Garnet with growth zoning is also found in the kyanite zone.In the light of microarea compositional variation of Grt and Bt, the temperatuIe and pressuIe at the progressive, peak and post peak metamorphic stages are determined by correctly using GrtBt thermometer and GASP barometer. On this basis, a counterclockwise P-T-t path can be constructed, which reflects the closing process of an ensialic rift belt in this region during the Early Proterozoic.

Metamorphic P-T-t Path of UHT Granulites from the North Tongbai Orogen, Central China

Although zircon U-Pb geochronometer has been widely used for dating metamorphism in moderate- to high-grade metamorphic rocks, it is still difficult to link the zircon U-Pb age to pressure and temperature （P-T） conditions. In this study, zircon trace elements and Hf isotopes and REE partitioning between zircon and garnet are adopted to track the formation condition of zircon in the granu- lites from North Tongbai Orogen, Central China. Combined with previous metamorphic P-T path results, a quantitative integrated anticlockwise P-T-t path was established for Tongbai granulites. These grauulites recorded an early low-P heating followed by a dramatic pressure increase. Evidence for the prograde history （M1） is provided by cordierite, orthopyroxene and biotite inclusions in garnet. The prograde metamorphism occurred at around 443±3 Ma, with P-T conditions of ca. 730-820 ℃ and 〈6 kbar. The peak metamorphic （M2） condition is 〉920 ℃ and 8.5-10 kbar and the peak metamorphism age is ca. 432±4 Ma. At around 419 Ma, the granulites suffered an amphibolite-facies retrograde metamorphism （M3）, represented by the replacement of garnet by biotite and plagioclase, and clinopyroxene by amphibole, with metamorphic condition of ca. 700℃ and ca. 7 kbar. The last retrograde metamorphism （M4） is a greenschist-facies overprint with an age of ca. 404 Ma. It is concluded that the meta- morphism of Tongbai granulite lasted for more than 40 Ma, including a stage of more than 20 Ma granulitc-facies metamorphism. The prolonged granulite-facies metamorphism resulted from the continuous northward subduction of the Shangdan oceanic crust beneath the North Qinling terrane.

P-T-t path of metamorphism for the Julin Group and its geodynamical implications in Yuanmou,Yunnan

The metamorphic complex of the Julin Group occurs in the Yuanmou area of Yunnan Province on the western margin of the Yangtze Platform, and connects with the Kangdian metamorphic complex to the north. Based on the detailed petrographic observations and studies of garnet growth zoning, a P-T-t path has been reconstructed for the staurolite-kyanite zone in the Julin Group. This path is characterized by (1) a counter-clockwise evolutional trend, (2) a quicker increase of temperature than that of pressure in the initial prograde metamorphism, but slower near the peak, then temperature and pressure simultaneously reaching the peak metamorphic conditions, and (3) a slow near-isobaric cooling during the retrograde process. The P-T-t path for prograde metamorphism is closely related to magmatic accretion in the arc setting. The magmatic accretion model, metamorphism type and tectonic setting may be compared with the global Grenville tectono-metamorphic events, and related to the assembly of the Rodinia at the late Meso-proterozoic-early Neoproterozoic (~1.0 Ga). The retrograde P-T-t path shows a slow near-isobaric cooling, indicating sustained heat supplies from the upper mantle and no rapid erosion. This heat source may be originated from the Neoproterozoic (~0.82 Ga) breakup of the Rodinia.

Dual-Path Vision Transformer用于急性缺血性脑卒中辅助诊断

急性缺血性脑卒中是由于脑组织血液供应障碍导致的脑功能障碍,数字减影脑血管造影(DSA)是诊断脑血管疾病的金标准。基于患者的正面和侧面DSA图像,对急性缺血性脑卒中的治疗效果进行分级评估,构建基于Vision Transformer的双路径图像分类智能模型DPVF。为了提高辅助诊断速度,基于EdgeViT的轻量化设计思想进行了模型的构建;为了使模型保持轻量化的同时具有较高的精度,提出空间-通道自注意力模块,促进Transformer模型捕获更全面的特征信息,提高模型的表达能力;此外,对于DPVF的两分支的特征融合,构建交叉注意力模块对两分支输出进行交叉融合,促使模型提取更丰富的特征,从而提高模型表现。实验结果显示DPVF在测试集上的准确率达98.5%,满足实际需求。

华北克拉通吉南夹皮沟新太古代石榴黑云斜长片麻岩的变质P-T-t演化及构造意义

华北克拉通东部陆块新太古代末期的构造体制是近年来备受学界关注的热点议题。本文对地处华北克拉通东部陆块东北部的吉南夹皮沟石榴黑云斜长片麻岩进行了详细的岩相学、矿物化学、变质相平衡模拟、传统地质温压计和锆石U-Pb年代学研究,以明确其变质P-T-t演化,探讨构造过程和动力学机制。石榴黑云斜长片麻岩主要由石榴石、黑云母、斜长石、角闪石、石英和少量钛铁矿组成,记录了逆时针P-T轨迹,可以划分为三个变质阶段。岩石第一阶段的矿物组合为黑云母+斜长石+角闪石+石英+钛铁矿(+熔体)(Bt 1+Pl 1+Amp 1+Qz+Ilm(+L)),记录的温压条件为790~854℃和0.55~0.88GPa,之后通过升压略降温到达压力峰期阶段,在这个过程中角闪石分解、石榴石生长、基质型斜长石的X_(An)值从核到边降低。第二阶段的矿物组合为石榴石+黑云母+斜长石+角闪石+石英+钛铁矿(+熔体)(Grt+Bt_(2)+Pl_(2)(核部)+Amp_(2)+Qz+Ilm(+L)),相平衡模拟获得该阶段的温压条件为670~745℃和1.10~1.24GPa,传统地质温压计的结果为707~771℃和0.99~1.18GPa,两者可相互佐证,可能代表了岩石的压力峰期阶段。第三阶段的矿物组合为黑云母+斜长石+石英+钛铁矿(Bt_(3)+Pl_(2)(边部)+Qz+Ilm),形成于压力峰期后的降温降压过程,石榴石边部分解形成斜长石,该类斜长石的X_(An)值从核到边逐渐升高。变质锆石U-Pb定年获得2483±8Ma(MSWD=3.2)的年龄,结合稀土配分模式和锆石Ti温度计计算结果,将该年龄解释为岩石压力峰期阶段前的变质时代。考虑到吉南变质地体新太古代末期岩浆活动与变质作用的时间重叠性、区域上的“穹窿-龙骨”构造样式、前人的变质作用资料以及石榴黑云斜长片麻岩记录的升压轨迹,本文认为吉南新太古代末期变质作用与重力凹沉构造有关。

Enhancing Critical Path Problem in Neutrosophic Environment Using Python

In the real world,one of the most common problems in project management is the unpredictability of resources and timelines.An efficient way to resolve uncertainty problems and overcome such obstacles is through an extended fuzzy approach,often known as neutrosophic logic.Our rigorous proposed model has led to the creation of an advanced technique for computing the triangular single-valued neutrosophic number.This innovative approach evaluates the inherent uncertainty in project durations of the planning phase,which enhances the potential significance of the decision-making process in the project.Our proposed method,for the first time in the neutrosophic set literature,not only solves existing problems but also introduces a new set of problems not yet explored in previous research.A comparative study using Python programming was conducted to examine the effectiveness of responsive and adaptive planning,as well as their differences from other existing models such as the classical critical path problem and the fuzzy critical path problem.The study highlights the use of neutrosophic logic in handling complex projects by illustrating an innovative dynamic programming framework that is robust and flexible,according to the derived results,and sets the stage for future discussions on its scalability and application across different industries.

Optimal search path planning of UUV in battlefeld ambush scene

Aiming at the practical application of Unmanned Underwater Vehicle(UUV)in underwater combat,this paper proposes a battlefield ambush scene with UUV considering ocean current.Firstly,by establishing these mathematical models of ocean current environment,target movement,and sonar detection,the probability calculation methods of single UUV searching target and multiple UUV cooperatively searching target are given respectively.Then,based on the Hybrid Quantum-behaved Particle Swarm Optimization(HQPSO)algorithm,the path with the highest target search probability is found.Finally,through simulation calculations,the influence of different UUV parameters and target parameters on the target search probability is analyzed,and the minimum number of UUVs that need to be deployed to complete the ambush task is demonstrated,and the optimal search path scheme is obtained.The method proposed in this paper provides a theoretical basis for the practical application of UUV in the future combat.

An Improved Bounded Conflict-Based Search for Multi-AGV Pathfinding in Automated Container Terminals

As the number of automated guided vehicles(AGVs)within automated container terminals(ACT)continues to rise,conflicts have becomemore frequent.Addressing point and edge conflicts ofAGVs,amulti-AGVconflict-free path planning model has been formulated to minimize the total path length of AGVs between shore bridges and yards.For larger terminalmaps and complex environments,the grid method is employed to model AGVs’road networks.An improved bounded conflict-based search(IBCBS)algorithmtailored to ACT is proposed,leveraging the binary tree principle to resolve conflicts and employing focal search to expand the search range.Comparative experiments involving 60 AGVs indicate a reduction in computing time by 37.397%to 64.06%while maintaining the over cost within 1.019%.Numerical experiments validate the proposed algorithm’s efficacy in enhancing efficiency and ensuring solution quality.

A Multi-Constraint Path Optimization Scheme Based on Information Fusion in Software Defined Network

The existingmultipath routing in Software Defined Network (SDN) is relatively blind and inefficient, and there is alack of cooperation between the terminal and network sides, making it difficult to achieve dynamic adaptationof service requirements and network resources. To address these issues, we propose a multi-constraint pathoptimization scheme based on information fusion in SDN. The proposed scheme collects network topology andnetwork state information on the network side and computes disjoint paths between end hosts. It uses the FuzzyAnalytic Hierarchy Process (FAHP) to calculate the weight coefficients of multiple constrained parameters andconstructs a composite quality evaluation function for the paths to determine the priority of the disjoint paths. TheSDN controller extracts the service attributes by analyzing the packet header and selects the optimal path for flowrule forwarding. Furthermore, the service attributes are fed back to the path composite quality evaluation function,and the path priority is dynamically adjusted to achieve dynamic adaptation between service requirements andnetwork status. By continuously monitoring and analyzing the service attributes, the scheme can ensure optimalrouting decisions in response to varying network conditions and evolving service demands. The experimentalresults demonstrated that the proposed scheme can effectively improve average throughput and link utilizationwhile meeting the Quality of Service (QoS) requirements of various applications.

Depth First:Optimal Path Discovery Between Designated Nodes in Random Ring-Based Graphs

This paper focuses on optimally determining the existence of connected paths between some given nodes in random ring-based graphs.Serving as a fundamental underlying structure in network modeling,ring topology appears as commonplace in many realistic scenarios.Regarding this,we consider graphs composed of rings,with some possible connected paths between them.Without prior knowledge of the exact node permutations on rings,the existence of each edge can be unraveled through edge testing at a unit cost in one step.The problem examined is that of determining whether the given nodes are connected by a path or separated by a cut,with the minimum expected costs involved.Dividing the problem into different cases based on different topologies of the ring-based networks,we propose the corresponding policies that aim to quickly seek the paths between nodes.A common feature shared by all those policies is that we stick to going in the same direction during edge searching,with edge testing in each step only involving the test between the source and the node that has been tested most.The simple searching rule,interestingly,can be interpreted as a delightful property stemming from the neat structure of ring-based networks,which makes the searching process not rely on any sophisticated behaviors.We prove the optimality of the proposed policies by calculating the expected cost incurred and making a comparison with the other class of strategies.The effectiveness of the proposed policies is also verified through extensive simulations,from which we even disclose three extra intriguing findings:i)in a onering network,the cost will grow drastically with the number of designated nodes when the number is small and will grow slightly when that number is large;ii)in ring-based network,Depth First is optimal in detecting the connectivity between designated nodes;iii)the problem of multi-ring networks shares large similarity with that of two-ring networks,and a larger number of ties between rings will not influence the expected cost.

Distal-scanning common path probe for optical coherence tomography

In this paper,we present a distal-scanning common path probe for optical coherence tomography(OCT)equipped with a hollow ultrasonic motor and a simple and specially designed beam-splitter.This novel probe proves to be able to effectively circumvent polarization and dispersion mismatch caused by fiber motion and is more robust to a variety of interfering factors during the imaging process,experimentally compared to a conventional noncommon path probe.Furthermore,our design counteracts the attenuation of backscattering with depth and the fall-off of the signal,resulting in a more balanced signal range and greater imaging depth.Spectral-domain OCT imaging of phantom and biological tissue is also demonstrated with a sensitivity of∼100dB and a lateral resolution of∼3μm.This low-cost probe offers simplified system configuration and excellent robustness,and is therefore particularly suitable for clinical diagnosis as one-off medical apparatus.

Mechanical response and dilatancy characteristics of deep marble under different stress paths:A sight from energy dissipation

Dilatancy is a fundamental volumetric growth behavior observed during loading and serves as a key index to comprehending the intricate nonlinear behavior and constitutive equation structure of rock.This study focuses on Jinping marble obtained from the Jinping Underground Laboratory in China at a depth of 2400 m.Various uniaxial and triaxial tests at different strain rates,along with constant confining pressure tests and reduced confining pressure tests under different confining pressures were conducted to analyze the mechanical response and dilatancy characteristics of the marble under four stress paths.Subsequently,a new empirical dilatancy coefficient is proposed based on the energy dissipation method.The results show that brittle failure characteristics of marble under uniaxial compression are more obvious with the strain rate increasing,and plastic failure characteristics of marble under triaxial compression are gradually strengthened.Furthermore,compared to the constant confining pressure,the volume expansion is relatively lower under unloading condition.The energy dissipation is closely linked to the process of dilatancy,with a rapid increase of dissipated energy coinciding with the beginning of dilatancy.A new empirical dilatancy coefficient is defined according to the change trend of energy dissipation rate curve,of which change trend is consistent with the actual dilatancy response in marble under different stress paths.The existing empirical and theoretical dilatancy models are analyzed,which shows that the empirical dilatancy coefficient based on the energy background is more universal.

Multi-circular formation control with reinforced transient profiles for nonholonomic vehicles:A path-following framework

This article investigates a multi-circular path-following formation control with reinforced transient profiles for nonholonomic vehicles connected by a digraph.A multi-circular formation controller endowed with the feature of spatial-temporal decoupling is devised for a group of vehicles guided by a virtual leader evolving along an implicit path,which allows for a circumnavigation on multiple circles with an anticipant angular spacing.In addition,notice that it typically imposes a stringent time constraint on time-sensitive enclosing scenarios,hence an improved prescribed performance control(IPPC)using novel tighter behavior boundaries is presented to enhance transient capabilities with an ensured appointed-time convergence free from any overshoots.The significant merits are that coordinated circumnavigation along different circles can be realized via executing geometric and dynamic assignments independently with modified transient profiles.Furthermore,all variables existing in the entire system are analyzed to be convergent.Simulation and experimental results are provided to validate the utility of suggested solution.

On traceable iterated line graph and hamiltonian path index

Xiong and Liu[21]gave a characterization of the graphs G for which the n-iterated line graph L^(n)(G)is hamiltonian,for n≥2.In this paper,we study the existence of a hamiltonian path in L^(n)(G),and give a characterization of G for which L^(n)(G)has a hamiltonian path.As applications,we use this characterization to give several upper bounds on the hamiltonian path index of a graph.

Ground threat prediction-based path planning of unmanned autonomous helicopter using hybrid enhanced artificial bee colony algorithm

Unmanned autonomous helicopter(UAH)path planning problem is an important component of the UAH mission planning system.Aiming to reduce the influence of non-complete ground threat information on UAH path planning,a ground threat prediction-based path planning method is proposed based on artificial bee colony(ABC)algorithm by collaborative thinking strategy.Firstly,a dynamic threat distribution probability model is developed based on the characteristics of typical ground threats.The dynamic no-fly zone of the UAH is simulated and established by calculating the distribution probability of ground threats in real time.Then,a dynamic path planning method for UAH is designed in complex environment based on the real-time prediction of ground threats.By adding the collision warning mechanism to the path planning model,the flight path could be dynamically adjusted according to changing no-fly zones.Furthermore,a hybrid enhanced ABC algorithm is proposed based on collaborative thinking strategy.The proposed algorithm applies the leader-member thinking mechanism to guide the direction of population evolution,and reduces the negative impact of local optimal solutions caused by collaborative learning update strategy,which makes the optimization performance of ABC algorithm more controllable and efficient.Finally,simulation results verify the feasibility and effectiveness of the proposed ground threat prediction path planning method.

Correlation and Pathway Analysis of the Carbon,Nitrogen,and Phosphorus in Soil-Microorganism-Plant with Main Quality Components of Tea(Camellia sinensis)

The contents of carbon(C),nitrogen(N),and phosphorus(P)in soil-microorganisms-plant significantly affect tea quality by altering the main quality components of tea,such as tea polyphenols,amino acids,and caffeine.However,few studies have quantified the effects of these factors on the main quality components of tea.The study aimed to explore the interactions of C,N,and P in soil-microorganisms-plants and the effects of these factors on the main quality components of tea by using the path analysis method.The results indicated that(1)The contents of C,N,and P in soil,microorganisms,and tea plants were highly correlated and collinear,and showed significant correlations with the main quality components of tea.(2)Optimal regression equations were established to esti-mate tea polyphenol,amino acid,catechin,caffeine,and water extract content based on C,N,and P contents in soil,microorganisms,and tea plants(R^(2)=0.923,0.726,0.954,0.848,and 0.883,respectively).(3)Pathway analysis showed that microbial biomass phosphorus(MBP),root phosphorus,branch nitrogen,and microbial biomass carbon(MBC)were the largest direct impact factors on tea polyphenol,catechin,water extracts,amino acid,and caffeine content,respectively.Leaf carbon,root phosphorus,and leaf nitrogen were the largest indirect impact factors on tea polyphenol,catechin,and water extract content,respectively.Leaf carbon indirectly affected tea polyphenol content mainly by altering MBP content.Root phosphorus indirectly affected catechin content mainly by altering soil organic carbon content.Leaf nitrogen indirectly affected water extract content mainly by altering branch nitrogen content.The research results provide the scientific basis for reasonable fertilization in tea gardens and tea quality improvement.

A Path Planning Algorithm Based on Improved RRT Sampling Region

For the problem of slow search and tortuous paths in the Rapidly Exploring Random Tree(RRT)algorithm,a feedback-biased sampling RRT,called FS-RRT,is proposedbasedon RRT.Firstly,toimprove the samplingefficiency of RRT to shorten the search time,the search area of the randomtree is restricted to improve the sampling efficiency.Secondly,to obtain better information about obstacles to shorten the path length,a feedback-biased sampling strategy is used instead of the traditional random sampling,the collision of the expanding node with an obstacle generates feedback information so that the next expanding node avoids expanding within a specific angle range.Thirdly,this paper proposes using the inverse optimization strategy to remove redundancy points from the initial path,making the path shorter and more accurate.Finally,to satisfy the smooth operation of the robot in practice,auxiliary points are used to optimize the cubic Bezier curve to avoid path-crossing obstacles when using the Bezier curve optimization.The experimental results demonstrate that,compared to the traditional RRT algorithm,the proposed FS-RRT algorithm performs favorably against mainstream algorithms regarding running time,number of search iterations,and path length.Moreover,the improved algorithm also performs well in a narrow obstacle environment,and its effectiveness is further confirmed by experimental verification.

Heuristic Expanding Disconnected Graph:A Rapid Path Planning Method for Mobile Robots

Existing mobile robots mostly use graph search algorithms for path planning,which suffer from relatively low planning efficiency owing to high redundancy and large computational complexity.Due to the limitations of the neighborhood search strategy,the robots could hardly obtain the most optimal global path.A global path planning algorithm,denoted as EDG*,is proposed by expanding nodes using a well-designed expanding disconnected graph operator(EDG)in this paper.Firstly,all obstacles are marked and their corners are located through the map pre-processing.Then,the EDG operator is designed to find points in non-obstruction areas to complete the rapid expansion of disconnected nodes.Finally,the EDG*heuristic iterative algorithm is proposed.It selects the candidate node through a specific valuation function and realizes the node expansion while avoiding collision with a minimum offset.Path planning experiments were conducted in a typical indoor environment and on the public dataset CSM.The result shows that the proposed EDG*reduced the planning time by more than 90%and total length of paths reduced by more than 4.6%.Compared to A*,Dijkstra and JPS,EDG*does not show an exponential explosion effect in map size.The EDG*showed better performance in terms of path smoothness,and collision avoidance.This shows that the EDG*algorithm proposed in this paper can improve the efficiency of path planning and enhance path quality.

A Reverse Path Planning Approach for Enhanced Performance of Multi-Degree-of-Freedom Industrial Manipulators

In the domain of autonomous industrial manipulators,precise positioning and appropriate posture selection in path planning are pivotal for tasks involving obstacle avoidance,such as handling,heat sealing,and stacking.While Multi-Degree-of-Freedom(MDOF)manipulators offer kinematic redundancy,aiding in the derivation of optimal inverse kinematic solutions to meet position and posture requisites,their path planning entails intricate multiobjective optimization,encompassing path,posture,and joint motion optimization.Achieving satisfactory results in practical scenarios remains challenging.In response,this study introduces a novel Reverse Path Planning(RPP)methodology tailored for industrial manipulators.The approach commences by conceptualizing the manipulator’s end-effector as an agent within a reinforcement learning(RL)framework,wherein the state space,action set,and reward function are precisely defined to expedite the search for an initial collision-free path.To enhance convergence speed,the Q-learning algorithm in RL is augmented with Dyna-Q.Additionally,we formulate the cylindrical bounding box of the manipulator based on its Denavit-Hartenberg(DH)parameters and propose a swift collision detection technique.Furthermore,the motion performance of the end-effector is refined through a bidirectional search,and joint weighting coefficients are introduced to mitigate motion in high-power joints.The efficacy of the proposed RPP methodology is rigorously examined through extensive simulations conducted on a six-degree-of-freedom(6-DOF)manipulator encountering two distinct obstacle configurations and target positions.Experimental results substantiate that the RPP method adeptly orchestrates the computation of the shortest collision-free path while adhering to specific posture constraints at the target point.Moreover,itminimizes both posture angle deviations and joint motion,showcasing its prowess in enhancing the operational performance of MDOF industrial manipulators.