By studying the pile-formula and stress-wave methods (e.g., CASE method), the authors propose a new method for testing piles using the single-impact energy and P-S curves. The vibration and wave figures are recorded,...By studying the pile-formula and stress-wave methods (e.g., CASE method), the authors propose a new method for testing piles using the single-impact energy and P-S curves. The vibration and wave figures are recorded, and the dynamic and static displacements are measured by different transducers near the top of piles when the pile is im- pacted by a heavy hammer or micro-rocket. By observing the transformation coefficient of driving energy (total energy), the consumed energy of wave motion and vibration and so on, the vertical bearing capacity for single pile is measured and calculated. Then, using the vibration wave diagram, the dynamic relation curves between the force (P) and the displacement (S) is calculated and the yield points are determined. Using the static-loading test, the dynamic results are checked and the relative constants of dynamic-static P-S curves are determined. Then the sub- sidence quantity corresponding to the bearing capacity is determined. Moreover, the shaped quality of the pile body can be judged from the formation of P-S curves.展开更多
A new method of detecting the vertical bearing capacity for single-pile with high strain is discussed in this paper. A heavy hammer or a small type of rocket is used to strike the pile top and the detectors are used ...A new method of detecting the vertical bearing capacity for single-pile with high strain is discussed in this paper. A heavy hammer or a small type of rocket is used to strike the pile top and the detectors are used to record vibra- tion graphs. An expression of higher degree of strain (deformation force) is introduced. It is testified theoretically that the displacement, velocity and acceleration cannot be obtained by simple integral acceleration and differential velocity when long displacement and high strain exist, namely when the pile phase generates a whole slip relative to the soil body. That is to say that there are non-linear relations between them. It is educed accordingly that the force P and displacement S are calculated from the amplitude of wave train and (dynamic) P-S curve is drew so as to determine the yield points. Further, a method of determining the vertical bearing capacity for single-pile is dis- cussed. A static load test is utilized to check the result of dynamic test and determine the correlative constants of dynamic-static P(Q)-S curve.展开更多
In this paper,the soil-pile system of O-cell test of pile is simplified as an axi-symmetric problem.By using aggregation of quadrilateral isoparametric elements to simulate pile and soil,setting Goodman's elements...In this paper,the soil-pile system of O-cell test of pile is simplified as an axi-symmetric problem.By using aggregation of quadrilateral isoparametric elements to simulate pile and soil,setting Goodman's elements between pile and soils,a method of numerical simulation analysis on O-cell test of pile is presented with the consideration of nonlinear mechanical behavior of soils and pile-soil interface.The method is applied to the analysis of a case of O-cell test of pile.The load-displacement curves and axial force curves of upper pile and lower pile obtained from the O-cell test of pile are fitted,and parameters of the mechanical model of soils and interface are determined.Analysis results validate that the numerical simulation analysis method put forward in this paper is applicable.Furthermore,the interaction and influence of upper pile and lower pile in the O-cell test are also studied with the method.The result shows that if load box is located in a soil layer with fine mechanical behavior,the interaction of upper pile and lower pile in O-cell test can be ignored generally.展开更多
基金Key Projects of Tenth Five-year Plan of Yunnan Province (54-02-02).
文摘By studying the pile-formula and stress-wave methods (e.g., CASE method), the authors propose a new method for testing piles using the single-impact energy and P-S curves. The vibration and wave figures are recorded, and the dynamic and static displacements are measured by different transducers near the top of piles when the pile is im- pacted by a heavy hammer or micro-rocket. By observing the transformation coefficient of driving energy (total energy), the consumed energy of wave motion and vibration and so on, the vertical bearing capacity for single pile is measured and calculated. Then, using the vibration wave diagram, the dynamic relation curves between the force (P) and the displacement (S) is calculated and the yield points are determined. Using the static-loading test, the dynamic results are checked and the relative constants of dynamic-static P-S curves are determined. Then the sub- sidence quantity corresponding to the bearing capacity is determined. Moreover, the shaped quality of the pile body can be judged from the formation of P-S curves.
文摘A new method of detecting the vertical bearing capacity for single-pile with high strain is discussed in this paper. A heavy hammer or a small type of rocket is used to strike the pile top and the detectors are used to record vibra- tion graphs. An expression of higher degree of strain (deformation force) is introduced. It is testified theoretically that the displacement, velocity and acceleration cannot be obtained by simple integral acceleration and differential velocity when long displacement and high strain exist, namely when the pile phase generates a whole slip relative to the soil body. That is to say that there are non-linear relations between them. It is educed accordingly that the force P and displacement S are calculated from the amplitude of wave train and (dynamic) P-S curve is drew so as to determine the yield points. Further, a method of determining the vertical bearing capacity for single-pile is dis- cussed. A static load test is utilized to check the result of dynamic test and determine the correlative constants of dynamic-static P(Q)-S curve.
文摘In this paper,the soil-pile system of O-cell test of pile is simplified as an axi-symmetric problem.By using aggregation of quadrilateral isoparametric elements to simulate pile and soil,setting Goodman's elements between pile and soils,a method of numerical simulation analysis on O-cell test of pile is presented with the consideration of nonlinear mechanical behavior of soils and pile-soil interface.The method is applied to the analysis of a case of O-cell test of pile.The load-displacement curves and axial force curves of upper pile and lower pile obtained from the O-cell test of pile are fitted,and parameters of the mechanical model of soils and interface are determined.Analysis results validate that the numerical simulation analysis method put forward in this paper is applicable.Furthermore,the interaction and influence of upper pile and lower pile in the O-cell test are also studied with the method.The result shows that if load box is located in a soil layer with fine mechanical behavior,the interaction of upper pile and lower pile in O-cell test can be ignored generally.
