贻贝启发接枝骨形态发生蛋白2成骨活性肽的介孔生物玻璃修复股骨髁缺损

背景:骨形态发生蛋白2在胚胎发育、骨骼形成和再生修复中具有重要作用,但高剂量应用与癌症发病密切相关。骨形态发生蛋白2成骨活性段L20能够有效减少癌症等不良反应,并可显著促进骨组织再生。目的:将骨形态发生蛋白2活性肽段以贻贝衍生肽模拟策略接枝在介孔生物玻璃表面,探究其对组织工程成骨性能的影响。方法:(1)采用模板法合成介孔生物玻璃纳米颗粒,采用一步法合成负载骨形态发生蛋白2成骨活性肽L20的介孔生物玻璃纳米颗粒,表征负载骨形态发生蛋白2成骨活性肽L20介孔活性玻璃纳米颗粒的形貌与体外缓释性能。(2)分离提取SD大鼠骨髓间充质干细胞,传2代后分别与PBS(空白组)、介孔生物玻璃纳米颗粒(对照组)、负载骨形态发生蛋白2成骨活性肽L20介孔生物玻璃纳米颗粒(实验组)共培养,采用细胞活死荧光染色和CCK-8法检测细胞毒性和细胞增殖,扫描电镜观察细胞黏附;成骨诱导分化后,进行碱性磷酸酶染色、茜素红S染色与成骨相关基因表达检测。(3)取15只SD大鼠,建立双侧股骨髁缺损模型,采用随机数字表法分为3组:空白组(n=5)不植入任何材料,对照组(n=5)植入介孔生物玻璃纳米颗粒,实验组(n=5)植入负载骨形态发生蛋白2成骨活性肽L20介孔生物玻璃纳米颗粒。术后8周,进行股骨Micro-CT扫描与组织形态观察。结果与结论:(1)扫描电镜下可见负载骨形态发生蛋白2成骨活性肽L20介孔生物玻璃纳米颗粒为球形、单分散颗粒,透射电镜下可见其具有多孔结构,平均粒径为(268.10±0.58) nm,体外可缓释L20。(2)负载骨形态发生蛋白2成骨活性肽L20介孔生物玻璃纳米颗粒无细胞毒性,并且可促进骨髓间充质干细胞的增殖与黏附;与空白组、对照组相比,实验组碱性磷酸酶活性与细胞外基质矿化能力均升高(P <0.05),碱性磷酸酶、Runx2、骨钙素mRNA表达升高(P <0.05)。(3)股骨Micro-CT扫描结果显示,与空白组、对照组相比,实验组新生骨量与骨密度均升高(P <0.05);苏木精-伊红与Masson染色结果显示,与空白组、对照组相比,实验组新骨生成与胶原纤维均增加。(4)结果表明,负载骨形态发生蛋白2活性肽L20介孔生物玻璃纳米颗粒具有良好的生物相容性及体内外促成骨性能,可促进SD大鼠股骨髁缺损的再生修复。

Fluorescence quenching method for the determination of catechol with gold nanoparticles and tyrosinase hybrid system

The determination method of catechol by fluorescence quenching was developed.The assay was based on the combination of the unique property of gold nanoparticles with tyrosinase enzymatic reaction.In the presence of tyrosinase,the fluorescence of gold nanoparticles was quenched by catechol which can be employed to detect catechol.Under the optimal conditions,a linear range 5.0×10^(-7)-1.0×10^(-3) mol L^(-1) and a detection limit 1.0×10^(-7) mol L^(-1) of catechol were obtained.o-Quinone intermediate produced...

Vapour-phase O-methylation of Catechol with Methanol on Ti-containing Phosphate Catalysts

Ti-containing phosphate（ Ti-P-O ） catalysts with different molar ratios of P to Ti （0--2. 0 ） were synthesized and characterized by XRD, N2-adsorption/desorption, IR and temperature-programmed desorption （TPD） methods. The catalytic properties of Ti-P-O samples in the vapor-phase O-methylation of catechol with methanol were also studied. The catechol conversion increases with the increase of the molar ratio of P to Ti in a range of 0-0. 33, while a further increase in the P content leads to a decrease of the catalytic activity. Meanwhile, the selectivities of the catalysts to the main product（guaiacol） increase gradually with the increase of the molar ratio of P to Ti. The presence of relatively strong Lewis acidic and/or basic sites in the P-free catalyst should be responsible for the formation of C-alkylation products. The weak acid-base characteristics of the catalysts are favourable for the mono-O-methylation of catechol. In comparison with the Lewis acidic sites, the Bronsted acidic sites on the catalysts are more active for the title reaction.

Characterization and Catalytic Activity of Titanium-containing Aluminum Phosphate Prepared by Sol-gel and Nonuniform Precipitation for O-Alkylation of Catechol with Ethanol

Three titanium-containing aluminum phosphate catalysts with a general formula Al 0.77 Ti 0.23 PO 4 were prepared by the sol-gel method at room temperature(APTS), and a nonuniform precipitation procedure at room temperature(APTR) and under reflux(APTF), respectively. The structural features and the surface properties of the three catalysts were determined by means of the physical adsorption of nitrogen at liquid N 2 temperature, XRD, UV-Vis, NH 3-TPD and IR of adsorbed pyridine. The vapor phase O-alkylation of catechol with ethanol over the prepared catalysts was studied. It was found that the activity and the selectivity of these catalysts are greatly dependent on the preparation method, and catalyst APTF shows the highest activity and selectivity. The characterization evidence indicates that the weak Brnsted acid sites were more effective for the reaction.

The Separation of Catechol from Carbofuran Phenol by Extractive Distillation

In this study, extractive distillation has been applied to separate catechol （CAT） from carbofuran phenol （CFP） with high purity and yield. The relative volatility of CFP to CAT was measured, and the choice of separating agents was investigated. The experimental results indicated that CFP/CAT is an azeotropic system with an azeotropic point at 93.40℃/0.400 kPa and an azeotropic mixture containing 49.96% of CFP and 50.04% of CAT. Data from the determination of the relative volatility have shown that separating agents such as diglycol and 4-butylcatechol （4-TBC） are able to increase the relative volatility up to 1.90. In one shot process batch extractive distillation of CFP mixture with 3% （by mass） diglycol as separating agent, the purity and yield of the obtained CFP was 99.0% and 95.0%, respectively, while the distillation without separating agent provided a purity and yield of only 98.0% and 90.0%, respectively, There was no residual separating agent found in the product.

Alkylation of Catechol with tert-Butyl Alcohol Catalyzed by Mesoporous Acidic Montmorillonite Heterostructure Catalysts

The liquid phase alkylation of catechol with tert-butyl alcohol to produce4-tert-butyl catechol (4-TBC) was carried out over MCM-41, HZSM-5, H-exchanged montmorillonite andnovel acidic porous montmorillonite heterostructures (PMHs). Upon all catalysts tested, 4-TBC is themain product and 3-tert-butyl catechol (3-TBC) and 3,5-di-tert-butyl catechol are the sideproducts. The synthetic PMHs showed higher conversion of catechol and better selectivity to 4-TBCcompared to other solid acid catalysts tested. Over the PMHs derived from H-exchangedmontmorillonite through template extraction processes, the suitable reaction temperature is ca 410K, the ratio of catechol to tert-butyl alcohol is 1:2. Increasing the amount of catalyst (lowerweight hourly space velocity) can improve the conversion of catechol and influence the selectivityslightly. The reasonable reaction time is ca 8 h. The type and strength of acidity ofH-montmorillonite and PMH were determined by pyridine adsorption FT-IR and ammoniatemperature-programmed desorption techniques. The medium and strong acid sites are conducive toproducing 4-TBC and the weak acid sites to facilitating the 3-TBC formation. The differences betweenthe PMHs from calcination and those from extraction are attributed to proton migration and aciditychange in the gallery surface.

Hydroxylation Reaction of Phenol to Catechol on Lanthanide-Zirconia Catalyst

The selective H2O2 oxidation reaction of phenol to catechol on Ln-ZrO2 catalyst has improved the selectivity to 85%, to compare with the conventional titania catalyst. With addition of rare earth such as lanthanum, neodymium, to zirconia as catalyst, the selectivity is increased by 72% and 60% respectively in comparison with the bare titania catalyst.

Adsorption of catechol from aqueous solution by aminated hypercrosslinked polymers

Adsorption of catechol from aqueous solution with the hypercrosslinked polymeric adsorbent NDA-100 and its derivatives AH-1, AH-2 and AH-3 aminated by dimethylamine, the commercial resin Amberlite XAD-4 and weakly basic anion exchanger resin D301 was compared. It was found that the aminated hypercrosslinked resins had the highest adsorption capacities among the tested polymers. The empirical Freundlich equation was successfully employed to describe the adsorption process. Specific surface area and micropore structure of the adsorbent, in company with tertiary amino groups on matrix affected the adsorption performance towards catechol. In addition, thermodynamic study was carried out to interpret the adsorption mechanism. Kinetic study testified that the tertiary amino groups on the polymer matrix could decrease the adsorption rate and increase the adsorption apparent activation energy.

Effects of Coverage,Water,and Defects on Catechol/TiO2 Interface

Catechol adsorbed on TiO_(2)is one of the simplest models to explore the relevant properties of dye-sensitized solar cells.However,the effects of water and defects on the electronic levels and the excitonic properties of the catechol/TiO_(2)interface have been rarely explored.Here,we investigate four catechol/TiO_(2)interfaces aiming to study the influence of coverage,water,and defects on the electronic levels and the excitonic properties of the catechol/TiO_(2)interface through the first-principles many-body Green’s function theory.We find that the adsorption of catechol on the rutile(110)surface increases the energies of both the TiO_(2)valence band maximum and conduction band minimum by approximately 0.7 eV.The increasing coverage and the presence of water can reduce the optical absorption of charge-transfer excitons with maximum oscillator strength.Regarding the reduced hydroxylated TiO_(2)substrate,the conduction band minimum decreases greatly,resulting in a sub-bandgap of 2.51 eV.The exciton distributions in the four investigated interfaces can spread across several unit cells,especially for the hydroxylated TiO2substrate.Although the hydroxylated TiO_(2)substrate leads to a lower open-circuit voltage,it may increase the separation between photogenerated electrons and holes and may therefore be beneficial for improving the photovoltaic efficiency by controlling its concentration.Our results may provide guidance for the design of highly efficient solar cells in future.

A DFT Study on Intramolecular Hydrogen Bond in Substituted Catechols and Their Radicals

Density functional theory (DFT) at B3LYP/6-31G(d,p) level was employed to calculate intramolecular hydrogen bond enthalpies (HIHB), O-H charge differences, O-H bond lengths and bond orders for various substituted catechols and their radicals generated after H-abstraction. It was found that although the charge difference between hydrogen-bonded H and O played a role in determining HIHB, HIHB was mainly governed by the hydrogen bond length. As the oxygen-centered radical has great tendency to form a chemical bond with the H atom, hydrogen bond lengths in catecholic radicals are systematically shorter than those in catechols. Hence, the HIHB for the former are higher than those for the latter.

Catechol-Bisphosphonate Conjugates: New Potential Chelating Agents for Metal Intoxication Therapy

In a quest for better chelating therapy drugs for the treatment of intoxication by Fe, Al, oractinides, two new series of mixed catechol-bisphosphonate through amide linkage were synthesized.Benzyl group was used as protecting group to avoid the breakage of amide by acid hydrolysis orimcomplete reaction in silylation-dealkylation using bromotrimethylsilane.

SYNTHESIS OF POLYCATECHOL WITH ELECTROCHEMICAL ACTIVITY AND ITS PROPERTIES

The electrochemical polymerization of catechol on platinum has been carried out using repeated potential cycling between -0.2 and 1.1 V (versus SCE). The electrolytic solution consisted of 0.2 mol dm(-3) catechol, 0.5 mol dm(-3) NaCl and 0.1 mol dm(-3) Na2HPO4 with pH 8.72. Catechol can not be polymerized at pH greater than or equal to 10.12. Polycatechol has an electrochemical lactivity at pH less than or equal to 4. The anodic and cathodic peak potentials of polycatechol shift towards more negative values as the pH of the solution increases from 1 to 4. The electrochemical activity of polycatechol hardly changes in this pH region, but it decreases slowly with time. This is caused by oxygen in air, which leads to an irreversible oxidation of polycatechol. This property is favorable for protecting metals from corrosion. Raman and FTIR spectra of polycatechol and catechol are quite different. AFM images of polycatechol films provide evidence that the image of the oxidized state of polycatechol is markedly different from that of the reduced one. This difference is caused by doping and dedoping of polycatechol.

The Effects of Oxidation States, Spin States and Solvents on Molecular Structure, Stability and Spectroscopic Properties of Fe-Catechol Complexes: A Theoretical Study

In this study, in order to explain the solvent and spin state effects on the molecular structure of catechol-Fe complex [Fe(cat)3]n﹣?where n = 2 and 3, Hartree Fock (HF)-Density Functional Theory (DFT) hybrid calculations are performed at the B3LYP/6-311g(d,p) level of theory. The binding energies of Fe2+ and Fe3+ in high-spin state are higher than intermediate and low-spin states which show that the complex formation in a high spin state is more favorable. The calculated binding energies at different solvents indicate that the binding energies in polar solvents are lower than non-polar solvents. Furthermore, spectroscopic studies including FTIR and Raman spectrum in various solvents reveal that the formation of intermolecular bonds between the oxygen atom of carbonyl group and the hydrogen atom of solvent causes a spectral red shift. The calculated FTIR and geometry parameters are in good agreement with previous experimental data. Donor-acceptor interaction energies are evaluated due to the importance of the charge transfer in the complex formation. It is observed that the free electrons of oxygen atom interact with the antibonding orbitals of the iron. Finally, some correlations between the quantum chemical reactivity indices of the complexes and solvent polarity are considered. The study indicates a linear correlation between chemical hardness and binding energies of [Fe(cat)3]3﹣?complex.

Synthesis and Characterization of Model Complexes of Catechol Dioxygenases Supported by the Anionic Hydrotris-3,5-dimethyl-pyrazolylborate Ligand

An iron（Ⅲ） complex [Fe^Ⅲ（Tpz^Me2）（Hpz^Me2）Cl2]（1） has been synthesized at a low temperature, which contains tripodal ligand, namely, the anionic hydrotris-3,5-dimethyl-pyrazolylborate（Tpz^Me2）. A series of iron（Ⅲ） catecholate complexes 2-5 has been obtained via the reaction of compound 1 with catecholate or substituted catecholates. These complexes were characterized by X-ray crystallographic analysis, mass spectrometry and elemental analysis, and the results show that TpzMe2 ligand has the beneficial effect on the stabilization of iron（Ⅲ） catecholate complexes.

Subcloning and high level expression of xylE gene coding for the catechol 2, 3 dioxygenase in E. coli

To construct a high-level expression of xylE gene in E. coli for quick detection of environmental pollution of aromatic compounds. Methods and Results: XylE gene coding for the catechol 2, 3 dioxygenase (CatO2ase ) was amplified from the recombinant plasmid pTG402 by using PCR technique and was subcloned into pUC118N and pUC119N. The single stranded recombinant phage DNA from the transformed E. coli MV1184 cells was used for sequencing. The sequence of xylE gene was proved to be the same as reported. The gene was then subcloned into the high expression plasmid pJLA503, its expression amount being about 34. 2% of the total bacterial proteins. Conclusion: xylE gene is highly expressed in host E. coli TG1.

Synthesis, Crystal Structure and Catechol Oxidase Mimic Activity of a Dinuclear Copper Complex

A dinuclear copper complex [Cu2LCl2]（ClO4）2 （L = 2,2＇-（piperazine-1,4-diyl）bis- （N,N-bis（pyridine-2-ylmethyl）ethan-1-amine）） has been synthesized and structurally characterized. It crystallizes in triclinic, space group Pī with α = 8.5707（9）, b = 10.5083（12）, c = 11.4878（13） A, α = 76.197（2）, β = 88.271（2）, γ = 87.855（2）o, V = 1003.81（19） A3, Z = 1, F（000） = 478, Dc = 1.544 Mg/m3, Mr = 933.60, μ = 1.383 mm^-1, the final R = 0.0669 and wR = 0.1486 for 3675 observed reflections with I 〉 2σ（I）. Its catechol oxidase mimic activity was studied spectroscopically by using 3,5-di-tert-butylcatechol （3,5-DTBC） as the substrate. The results showed that the kinetics of catechol catalyzed by the complex accorded with the Michaelis-Mentent equation, and the catechol oxidase catalytic activity of the complex increased with increasing the pH values.

Electrochemical determination of catechol in tea samples using anthraquinone modified carbon paste electrode

Electrochemical investigation of catechol using square wave voltammetry with anthraquinone modified carbon paste electrode was found to be very sensitive. Compared with the unmodified carbon paste electrode, the anthraquinone modified electrode remarkably increases the peak currents of catechol, and greatly lowers the peak potential separation. Two varieties of tea, namely green, and black variety: Wush Wush tea, from Ethiopia, known by its brand name were investigated. Responses for the extracts using ethanol: water (1:4) % v/v showed green tea to be superior in catechol content. Optimization of different variables such as pH of working solution, modifier composition and square wave parameters such as frequency, amplitude and step potential were made to improve the method efficiency during the experiment. The reproducibility for the nine repeated analysis of 80 μmol·L-1 of catechol gave a relative standard deviation of 3.65% and linear calibration plots were obtained in the range 6 to 80 μmol·L-1 with (R = 0.998) and the detection limit with (S/N = 3) was as low as 2.155 x 10-7 mol·L-1.

Nonheme Oxovanadium(V,IV) Complexes Catalyze the Oxidative Cleavage of Catechols

It was found that the oxovanadium(V) complex of triethanolamine (TEA) exhibits catalytic activity to the oxidative cleavage of catechols. On the other hand. the vanadyl nitrilotriacetic acid (NTA) complex is inactive. but leads to the formation of stable ternary complex. The main products of the catalytic oxidative cleavage of 3.5-di-tert-butylcatechol were separated and characterized. Based on the results. a reaction mechanism was discussed

Docking Studies on Binding Modes between the CatechoI-O-Methyltransferase and Catechol Derivatives for Antiparkinson Drug

Inhibition of the enzyme COMT （catechol-O-methyltransferase） is an important approach in the treatment of Parkinson＇s disease. A series of potent catechols for COMT may give insight to develop new ways of antiparkinson drug. COMT inhibitors represent a new class of antiparkinson drugs, when they are coadministered with levodopa. Our goal of research is to study the inhibition of catechol-O-methyltransferase by molecular modeling methods. Different molecular modeling tools are used to perform this work （molecular mechanics, molecular dynamics and molecular docking （molegro virtnaldocker））. The results obtained from this work, into which the inhibition of catechol-O-methyltransferase by molecular modeling methods was elucidated, allow us to conclude that different catechols presents a more optimised inhibition of catechol-O-methyltransferase. The results suggest reducing the severity of Parkinson＇s disease.

Relative Abundance and the Relationships between Aniline,Phenol and Catechol Degraders in Fresh Water

Relative abundance and relationships between aniline, phenol and catechol degraders were investigated in unpolluted and polluted fresh waters in Osaka prefecture, Japan. Phenol and catechol degraders were found more frequently compared to aniline degraders. The results indicate that these degraders were more abundant in polluted waters than in unpolluted waters. Aniline degraders isolated from the Ina River water showed a higher capability of degrading catechol than phenol. Analysis on sequence homology among these three kinds of degraders indicated a possible relationship between aniline degraders and certain strains of both catechol and phenol degraders.