Traditionally the majority of fractionation columns in natural gas processing plants were equipped with trays.However an option to trayed columns is to use packing.Packed columns offer a larger surface area per unit v...Traditionally the majority of fractionation columns in natural gas processing plants were equipped with trays.However an option to trayed columns is to use packing.Packed columns offer a larger surface area per unit volume for mass transfer and the continuous gas to liquid contact throughout the column rather than at specific levels (such as in tray columns).For process design purposes,it is essential to estimate the pressure drop for enabling the proper operation of packed columns.In this study,a simple generalized pressure drop correlation (GPDC) which is easier than existing approaches requiring more complicated and longer computations is developed for sizing randomly packed fractionation columns for pressure drops up to 150 mm water per meter of packing.This correlation can be used to estimate pressure drop for a given loading and column diameter.Alternatively,for a given pressure drop the diameter can be determined.The predictions from the proposed correlation have been compared with reported data and found good agreement with average absolute deviation hovering around 4.9%.The proposed predictive tool is superior owing to its accuracy and clear numerical background,wherein the relevant coefficients can be retuned quickly if new and more accurate data are available in the future.This proposed simple-to-use approach can be of immense practical value for the engineers and scientists to have a quick check on the pressure drop in packed columns for a given loading and column diameter.In particular,gas engineers would find the proposed approach can be used very friendly involving no complex expressions with transparent and easy-to-handle calculation steps.展开更多
Carbon dioxide (CO2) removal is an essential step in natural gas (NG) processing to provide high quality gas stream products and minimize operational difficulties. This preliminary study alms to investigate the re...Carbon dioxide (CO2) removal is an essential step in natural gas (NG) processing to provide high quality gas stream products and minimize operational difficulties. This preliminary study alms to investigate the removal of CO2 at high concentration level from the mixture of CO2-NG gas stream at elevated pressure via absorption process. This is to explore the possibility of exploring high CO2 content natural gas reserves by treatment at offshore platform. A mixed amine solvent, Stonvent-II, was used for the absorption of approximately 75 vol% CO2 in CO2-NG stream at a pressure of 10 barg. The initial solvent temperature was varied in order to study the impact of initial temperature on the absorption performance. Preliminary study at temperatures of 35 ℃ and 45 ℃ indicates that Stonvent-II was able to perform almost 100% removal of CO2 under both conditions. However, the CO2 absorption effect took place faster when the initial liquid temperature was lower. This is because when the initial liquid temperature is high, the temperature increase in the packing bed caused by the reaction heat is high which impacts the efficiency of absorption negatively.展开更多
Packed columns are widely used in the chemical industry such as absorption,stripping,distillation,and extraction in the production of e.g.organic chemicals,and pharmaceuticals.Pressure loss and pressure drop correlati...Packed columns are widely used in the chemical industry such as absorption,stripping,distillation,and extraction in the production of e.g.organic chemicals,and pharmaceuticals.Pressure loss and pressure drop correlations are of special interest when it comes to the hydrodynamic properties of a column.The pressure loss across the column is of interest in the design phase when the size of the blower to drive the gas stream through the column has to be decided.The loading point and flooding point are also influenced by the pressure loss and the area of operation is determined from these points.This work examines four different correlations on pressure drop.The correlations are(i)Ergun’s equation(1952),(ii)an improved version of Ergun’s equation by Stichlmair,Bravo,and Fair(1989),(iii)an equation developed by Billet and Schultes(1999),and(iv)an equation by Rocha,Bravo,and Fair(1993).The complexity of the correlations is increasing in the mentioned order,Ergun’s equation being the simplest one.This study investigates if the more complicated correlations give better predictions to pressure drop in packed columns.This is determined by comparing the correlations to experimental data for pressure drop in a packed column with 8.2 m of structured packing using water as the liquid and atmospheric air as the gas.Seven experiments were carried out for determining the pressure drop in the column with liquid flows varying from 0 to 500 kg·h^(-1).At constant liquid flow,the gas flow was varied from approximately 10 to 70 kg·h^(-1).The pressure drop across the non-wetted column was best described by the correlation by Rocha et al.while the pressure drop for liquid flows from 100 to 500 kg·h^(-1)was,in general,best described by Stichlmair’s equation.For an irrigated column,the highest deviation was a predicted pressure drop 69.6%lower than measured.The best prediction was 0.1%higher than the measured.This study shows,surprisingly,that for a system of water and atmospheric air,complicated correlations on pressure drop determination do not provide better estimates than simple equations.展开更多
Column packings continue to evolve as the needs of users for high efficiency,high resolution and highly sensitive high performance liquid chromatographic(HPLC) analysis drive further developments.In comparing and cont...Column packings continue to evolve as the needs of users for high efficiency,high resolution and highly sensitive high performance liquid chromatographic(HPLC) analysis drive further developments.In comparing and contrasting modern HPLC columns technologies,diameters of column packings and particle materials are covered.Some products and applications of modern HPLC columns are provided.Future directions in packing developments are predicted in this introductory article.展开更多
The study deals with a new regenerative air heat exchanger with an intermediate heat carrier used in the systems of room ventilation.A physical and mathematical model of the heat transfer process is proposed.The...The study deals with a new regenerative air heat exchanger with an intermediate heat carrier used in the systems of room ventilation.A physical and mathematical model of the heat transfer process is proposed.The influence of design and operating parameters on the temperature efficiency of the heat exchanger is analyzed.The possibility of a significant increase in its efficiency with a decrease in the packing diameter is shown.As a result of calculations,it was found that with a decrease in the filling height,the maximum temperature efficiency shifted towards a decrease in the air flow rate from its value determined from the equality of water equivalents of liquid and air.展开更多
This work presents a review of the findings into the ability of a digitally based particle packing algorithm, called DigiPac, to predict bed structure in a variety of packed columns, for a range of generic pellet shap...This work presents a review of the findings into the ability of a digitally based particle packing algorithm, called DigiPac, to predict bed structure in a variety of packed columns, for a range of generic pellet shapes frequently used in the chemical and process engineering industries. Resulting macroscopic properties are compared with experimental data derived from both invasive and non-destructive measurement techniques. Additionally, fluid velocity distributions, through samples of the resulting bed structures, are analysed using lattice Boltzmann method (LBM) simulations and are compared against experimental data from the literature.展开更多
Modern chromatography is increasingly focused on miniaturization and integration. Compared to conventional liquid chromatography, microfluidic chip liquid chromatography(microchip-LC) has the potential due to its zero...Modern chromatography is increasingly focused on miniaturization and integration. Compared to conventional liquid chromatography, microfluidic chip liquid chromatography(microchip-LC) has the potential due to its zero-dead volume connection and ease of integration. Nano-sized packings have the potential to significantly enhance separation performance in microchip-LC. However, their application has been hindered by packing difficulties. This study presents a method for packing nano-sized silica particles into a microchannel as the stationary phase. The microchip-LC packed column was prepared by combining the weir and the porous silica single-particle as frit to retain the packing particles. A surface tensionbased single-particle picking technique was established to insert porous single-particle frit into glass microchannels. Additionally, we developed a slurry packing method that utilizes air pressure to inject nano-sized packing into the microchannel. Pressure-driven chromatographic separation was performed using this nano-packed column integrated into a glass microchip. The mixture of four PAHs was successfully separated within just 8 min using a 5 mm separation channel length, achieving high theoretical plates(10~6plates/m). Overall, these findings demonstrate the potential of utilizing nano-sized packings for enhancing chromatographic performance in microchip systems.展开更多
This work evaluated the practicability and economy of the enhanced weathering(EW)-based CO_(2) capture in series packed bubble column(S-PBC)contactors operated with different process configurations and conditions.The ...This work evaluated the practicability and economy of the enhanced weathering(EW)-based CO_(2) capture in series packed bubble column(S-PBC)contactors operated with different process configurations and conditions.The S-PBC contactors are designed to fully use the advantages of abundant seawater and highly efficient freshwater through a holistic M4 model,including multi-physics,machine learning,multi-variable and multiobjective optimisation.An economic analysis is then performed to investigate the cost of different S-PBC configurations.A data-driven surrogate model based on a novel machine learning algorithm,extended adaptive hybrid functions(E-AHF),is implemented and trained by the data generated by the physics-based models.GA and NSGA-II are applied to perform single-and multi-objective optimisation to achieve maximum CO_(2) capture rate(CR)and minimum energy consumption(EC)with the optimal values of eight design variables.The R2 for the prediction of CR and EC is higher than 0.96 and the relative errors are lower than 5%.The M4 model has proven to be an efficient way to perform multi-variable and multi-objective optimisation,that significantly reduces computational time and resources while maintaining high prediction accuracy.The trade-off of the maximum CR and minimum EC is presented by the Pareto front,with the optimal values of 0.1014 kg h−1 for CR and 6.1855 MJ kg−1 CO_(2) for EC.The calculated net cost of the most promising S-PBC configuration is around 400$t−1 CO_(2),which is about 100$t−1 CO_(2) lower than the net cost of current direct air capture(DAC),but compromised by slower CO_(2) capture rate.展开更多
文摘Traditionally the majority of fractionation columns in natural gas processing plants were equipped with trays.However an option to trayed columns is to use packing.Packed columns offer a larger surface area per unit volume for mass transfer and the continuous gas to liquid contact throughout the column rather than at specific levels (such as in tray columns).For process design purposes,it is essential to estimate the pressure drop for enabling the proper operation of packed columns.In this study,a simple generalized pressure drop correlation (GPDC) which is easier than existing approaches requiring more complicated and longer computations is developed for sizing randomly packed fractionation columns for pressure drops up to 150 mm water per meter of packing.This correlation can be used to estimate pressure drop for a given loading and column diameter.Alternatively,for a given pressure drop the diameter can be determined.The predictions from the proposed correlation have been compared with reported data and found good agreement with average absolute deviation hovering around 4.9%.The proposed predictive tool is superior owing to its accuracy and clear numerical background,wherein the relevant coefficients can be retuned quickly if new and more accurate data are available in the future.This proposed simple-to-use approach can be of immense practical value for the engineers and scientists to have a quick check on the pressure drop in packed columns for a given loading and column diameter.In particular,gas engineers would find the proposed approach can be used very friendly involving no complex expressions with transparent and easy-to-handle calculation steps.
文摘Carbon dioxide (CO2) removal is an essential step in natural gas (NG) processing to provide high quality gas stream products and minimize operational difficulties. This preliminary study alms to investigate the removal of CO2 at high concentration level from the mixture of CO2-NG gas stream at elevated pressure via absorption process. This is to explore the possibility of exploring high CO2 content natural gas reserves by treatment at offshore platform. A mixed amine solvent, Stonvent-II, was used for the absorption of approximately 75 vol% CO2 in CO2-NG stream at a pressure of 10 barg. The initial solvent temperature was varied in order to study the impact of initial temperature on the absorption performance. Preliminary study at temperatures of 35 ℃ and 45 ℃ indicates that Stonvent-II was able to perform almost 100% removal of CO2 under both conditions. However, the CO2 absorption effect took place faster when the initial liquid temperature was lower. This is because when the initial liquid temperature is high, the temperature increase in the packing bed caused by the reaction heat is high which impacts the efficiency of absorption negatively.
基金the BioCO_(2) project(the Danish government through the EUDP agency No.64016-0082)the INTERACT project(European Union Seventh Framework Programme FP7/2007-2013 under grant agreement No.608535)the financial support from the Center for Energy Resources Engineering(CERE),and the Technical University of Denmark.
文摘Packed columns are widely used in the chemical industry such as absorption,stripping,distillation,and extraction in the production of e.g.organic chemicals,and pharmaceuticals.Pressure loss and pressure drop correlations are of special interest when it comes to the hydrodynamic properties of a column.The pressure loss across the column is of interest in the design phase when the size of the blower to drive the gas stream through the column has to be decided.The loading point and flooding point are also influenced by the pressure loss and the area of operation is determined from these points.This work examines four different correlations on pressure drop.The correlations are(i)Ergun’s equation(1952),(ii)an improved version of Ergun’s equation by Stichlmair,Bravo,and Fair(1989),(iii)an equation developed by Billet and Schultes(1999),and(iv)an equation by Rocha,Bravo,and Fair(1993).The complexity of the correlations is increasing in the mentioned order,Ergun’s equation being the simplest one.This study investigates if the more complicated correlations give better predictions to pressure drop in packed columns.This is determined by comparing the correlations to experimental data for pressure drop in a packed column with 8.2 m of structured packing using water as the liquid and atmospheric air as the gas.Seven experiments were carried out for determining the pressure drop in the column with liquid flows varying from 0 to 500 kg·h^(-1).At constant liquid flow,the gas flow was varied from approximately 10 to 70 kg·h^(-1).The pressure drop across the non-wetted column was best described by the correlation by Rocha et al.while the pressure drop for liquid flows from 100 to 500 kg·h^(-1)was,in general,best described by Stichlmair’s equation.For an irrigated column,the highest deviation was a predicted pressure drop 69.6%lower than measured.The best prediction was 0.1%higher than the measured.This study shows,surprisingly,that for a system of water and atmospheric air,complicated correlations on pressure drop determination do not provide better estimates than simple equations.
文摘Column packings continue to evolve as the needs of users for high efficiency,high resolution and highly sensitive high performance liquid chromatographic(HPLC) analysis drive further developments.In comparing and contrasting modern HPLC columns technologies,diameters of column packings and particle materials are covered.Some products and applications of modern HPLC columns are provided.Future directions in packing developments are predicted in this introductory article.
基金This work was supported by a state contract with the IT SB RAS№121031800217-8.
文摘The study deals with a new regenerative air heat exchanger with an intermediate heat carrier used in the systems of room ventilation.A physical and mathematical model of the heat transfer process is proposed.The influence of design and operating parameters on the temperature efficiency of the heat exchanger is analyzed.The possibility of a significant increase in its efficiency with a decrease in the packing diameter is shown.As a result of calculations,it was found that with a decrease in the filling height,the maximum temperature efficiency shifted towards a decrease in the air flow rate from its value determined from the equality of water equivalents of liquid and air.
文摘This work presents a review of the findings into the ability of a digitally based particle packing algorithm, called DigiPac, to predict bed structure in a variety of packed columns, for a range of generic pellet shapes frequently used in the chemical and process engineering industries. Resulting macroscopic properties are compared with experimental data derived from both invasive and non-destructive measurement techniques. Additionally, fluid velocity distributions, through samples of the resulting bed structures, are analysed using lattice Boltzmann method (LBM) simulations and are compared against experimental data from the literature.
基金supported by the National Natural Science Foundation of China (No.21936001)the Beijing Outstanding Young Scientist Program (No.BJJWZYJH01201910005017)。
文摘Modern chromatography is increasingly focused on miniaturization and integration. Compared to conventional liquid chromatography, microfluidic chip liquid chromatography(microchip-LC) has the potential due to its zero-dead volume connection and ease of integration. Nano-sized packings have the potential to significantly enhance separation performance in microchip-LC. However, their application has been hindered by packing difficulties. This study presents a method for packing nano-sized silica particles into a microchannel as the stationary phase. The microchip-LC packed column was prepared by combining the weir and the porous silica single-particle as frit to retain the packing particles. A surface tensionbased single-particle picking technique was established to insert porous single-particle frit into glass microchannels. Additionally, we developed a slurry packing method that utilizes air pressure to inject nano-sized packing into the microchannel. Pressure-driven chromatographic separation was performed using this nano-packed column integrated into a glass microchip. The mixture of four PAHs was successfully separated within just 8 min using a 5 mm separation channel length, achieving high theoretical plates(10~6plates/m). Overall, these findings demonstrate the potential of utilizing nano-sized packings for enhancing chromatographic performance in microchip systems.
基金supported by UK Engineering and Physical Sciences Research Council(EPSRC)under the grant numbers EP/V042432/1 and EP/V011863/1The authors also gratefully acknowledge the financial support from the National Natural Science Foundation of China(21978118).
文摘This work evaluated the practicability and economy of the enhanced weathering(EW)-based CO_(2) capture in series packed bubble column(S-PBC)contactors operated with different process configurations and conditions.The S-PBC contactors are designed to fully use the advantages of abundant seawater and highly efficient freshwater through a holistic M4 model,including multi-physics,machine learning,multi-variable and multiobjective optimisation.An economic analysis is then performed to investigate the cost of different S-PBC configurations.A data-driven surrogate model based on a novel machine learning algorithm,extended adaptive hybrid functions(E-AHF),is implemented and trained by the data generated by the physics-based models.GA and NSGA-II are applied to perform single-and multi-objective optimisation to achieve maximum CO_(2) capture rate(CR)and minimum energy consumption(EC)with the optimal values of eight design variables.The R2 for the prediction of CR and EC is higher than 0.96 and the relative errors are lower than 5%.The M4 model has proven to be an efficient way to perform multi-variable and multi-objective optimisation,that significantly reduces computational time and resources while maintaining high prediction accuracy.The trade-off of the maximum CR and minimum EC is presented by the Pareto front,with the optimal values of 0.1014 kg h−1 for CR and 6.1855 MJ kg−1 CO_(2) for EC.The calculated net cost of the most promising S-PBC configuration is around 400$t−1 CO_(2),which is about 100$t−1 CO_(2) lower than the net cost of current direct air capture(DAC),but compromised by slower CO_(2) capture rate.