In order to produce the high quality optical aspheric lens,the shrinkage of lens should be strictly controlled during the injection process.Serials of experiments are done to find the factors that affect the lens shri...In order to produce the high quality optical aspheric lens,the shrinkage of lens should be strictly controlled during the injection process.Serials of experiments are done to find the factors that affect the lens shrinkage during the injection molding process.The study is focused on the effect of gate size,packing time and pressure on the shrinkage.The gate size decides the effective packing time.Only when the effective packing time is enough,the shrinkage size will be decreased along with the packing pressure increased.However the packing time is determined by the gate size.But big gate size is not easily to be cut and the cutting difficulty will cause the part quality problems.The experiments show that packing pressure not only determines the part shrinkage size and also affects the part shrinkage uniformity.When the packing pressure is more than a critical one,the effect of packing pressure on the shrinkage size becomes smaller.And the shrinkage uniformity is guaranteed.展开更多
A novel cathodic–anodic-electrolysis packing（CAEP） used in the treatment of pyridine wastewater was researched, which mainly consisted of 4,4′-diamino-2,2′-disulfonic acid（DSD acid） industrial iron sludge. The ...A novel cathodic–anodic-electrolysis packing（CAEP） used in the treatment of pyridine wastewater was researched, which mainly consisted of 4,4′-diamino-2,2′-disulfonic acid（DSD acid） industrial iron sludge. The physical properties and morphology of the packing were studied. The CAEP was used in a column reactor during the pretreatment of pyridine wastewater. The influence of p H, hydraulic retention time（HRT）, the air–liquid ratio（A/L）and the initial concentration of pyridine were investigated by measuring the removal of total organic carbon（TOC） and pyridine. The characterization results showed that the bulk density, grain density, water absorption percentage and specific surface area were 921 kg/m3,1086 kg/m3, 25% and 29.89 m^2/g, respectively; the removal of TOC and pyridine could reach50% and 58% at the optimal experimental conditions（p H = 3, HRT = 8 hr, A/L = 2）. Notably,the surface of the packing was renewed constantly during the running of the filter, and the handling capacity was stable after running for three months.展开更多
文摘In order to produce the high quality optical aspheric lens,the shrinkage of lens should be strictly controlled during the injection process.Serials of experiments are done to find the factors that affect the lens shrinkage during the injection molding process.The study is focused on the effect of gate size,packing time and pressure on the shrinkage.The gate size decides the effective packing time.Only when the effective packing time is enough,the shrinkage size will be decreased along with the packing pressure increased.However the packing time is determined by the gate size.But big gate size is not easily to be cut and the cutting difficulty will cause the part quality problems.The experiments show that packing pressure not only determines the part shrinkage size and also affects the part shrinkage uniformity.When the packing pressure is more than a critical one,the effect of packing pressure on the shrinkage size becomes smaller.And the shrinkage uniformity is guaranteed.
基金supported by the Tai Shan Scholar Foundation(No.ts201511003)
文摘A novel cathodic–anodic-electrolysis packing（CAEP） used in the treatment of pyridine wastewater was researched, which mainly consisted of 4,4′-diamino-2,2′-disulfonic acid（DSD acid） industrial iron sludge. The physical properties and morphology of the packing were studied. The CAEP was used in a column reactor during the pretreatment of pyridine wastewater. The influence of p H, hydraulic retention time（HRT）, the air–liquid ratio（A/L）and the initial concentration of pyridine were investigated by measuring the removal of total organic carbon（TOC） and pyridine. The characterization results showed that the bulk density, grain density, water absorption percentage and specific surface area were 921 kg/m3,1086 kg/m3, 25% and 29.89 m^2/g, respectively; the removal of TOC and pyridine could reach50% and 58% at the optimal experimental conditions（p H = 3, HRT = 8 hr, A/L = 2）. Notably,the surface of the packing was renewed constantly during the running of the filter, and the handling capacity was stable after running for three months.
