Preparation of palladium-based catalyst by plasma-assisted atomic layer deposition and its applications in CO_(2) hydrogenation reduction

Supported Pd catalyst is an important noble metal material in recent years due to its high catalytic performance in CO_(2)hydrogenation.A fluidized-bed plasma assisted atomic layer deposition(FP-ALD) process is reported to fabricate Pd nanoparticle catalyst over γ-Al_(2)O_(3)or Fe_(2)O_(3)/γ-Al_(2)O_(3)support,using palladium hexafluoroacetylacetonate as the Pd precursor and H_(2)plasma as counter-reactant.Scanning transmission electron microscopy exhibits that highdensity Pd nanoparticles are uniformly dispersed over Fe_(2)O_(3)/γ-Al_(2)O_(3)support with an average diameter of 4.4 nm.The deposited Pd-Fe_(2)O_(3)/γ-Al_(2)O_(3)shows excellent catalytic performance for CO_(2)hydrogenation in a dielectric barrier discharge reactor.Under a typical condition of H_(2)to CO_(2)ratio of 4 in the feed gas,the discharge power of 19.6 W,and gas hourly space velocity of10000 h^(-1),the conversion of CO_(2)is as high as 16.3% with CH_(3)OH and CH4selectivities of 26.5%and 3.9%,respectively.

Highly reactive and reusable heterogeneous activated carbons-based palladium catalysts for Suzuki-Miyaura reaction

Suzuki-Miyaura reaction of aryl halides with phenylboronic acid using a heterogeneous palladium catalyst based on activated carbons(AC) was systematically investigated in this work. Two different reaction modes(batch procedure and continuous-flow procedure) were used to study the variations of reaction processing. The heterogeneous catalysts presented excellent reactivity and recyclability for iodobenzene and bromobenzene substrates in batch mode, which can be attributed to stabilization of Pd nanoparticles by the thiol and amino groups on the AC supports. However, significant dehalogenation in the reaction mixture and Pd leaching from the heterogeneous catalysts were observed in continuous-flow mode.This unique phenomenon in continuous-flow mode resulted in a dramatic decline in reaction selectivity and durability of heterogeneous catalysts comparing with that of batch mode. In addition, the heterogeneous Pd catalysts with thiol-and amino-modified AC supports exhibited different reactivity and durability in batch and continuous-flow mode owing to the difference of interaction between Pd species and AC supports.

Palladium nanoparticles in cross-linked polyaniline as highly efficient catalysts for Suzuki-Miyaura reactions

Palladium nanoparticles supported on cross-linked polyaniline with bulky phosphorus ligands were developed.These catalysts showed high efficiency in the Suzuki-Miyaura reaction of aryl chlorides and bromides with phenylboronic acids.Aryl chlorides and bromides with functional groups,such as CN,MeO,CHO,MeCO and NO_2,were converted to the corresponding biphenyls in high yields with catalyst loading.Additionally,the catalysts combined high activity with good reusability;they could be used at least five times for the Suzuki-Miyaura coupling reaction.

Influence of CeO_2 and La_2O_3 on properties of palladium catalysts used for emission control of natural gas vehicles

Pd/YZ-Al2O3 （Y and Zr modified Al2O3, and hereafter, labelled as A1） catalysts with 4 wt% additive CeO2 and/or La2O3 were prepared and characterized by X-ray photoelectron spectroscopy （XPS）, NO-temperature programmed desorption （NO-TPD）, Nz-adsorption/desorption （Branauer-Emmet-Teller BET method）, X-ray diffraction （XRD） and CO-chemisorption. Catalytic activities for CH4, CO and NO conversion were tested in a gas mixture simulated the emissions from natural gas vehicles （NGVs） operated under stoichiometric conditions. The results indicated that all catalysts exhibited excellent catalytic performances for CH4 and CO oxidation and the promoting effect of CeO2 or La2O3 was significant for NO conversion. XPS results showed that the electron density around Pd was increased by CeO2 and/or La2O3, the binding energy of Pd 3d decreased as the order： Pd/Al 〉 Pd/Ce/Al 〉 Pd/La/Al 〉 Pd/CeLa/Al. The electron-rich Pd showed Rh-like catalytic properties which exhibited good activity for the reduction of NO. NO-TPD results showed that the addition of CeO2 and/or La2O3 increased NO adsorption on surface, and promoted the conversion of NO.

Research Progress of Palladium Catalysts for Methane Combustion

Recent research progress and development of the palladium catalysts for methane combustion are described in this study.The influence of active species,precursor,solvent,preparation methodologies,support and dopant on the catalytic activity and thermal stability of the palladium catalysts was discussed.Results of deactivation and poisoning of palladium catalysts were analyzed.Furthermore,possible kinetic models and reaction mechanism were indicated for Pd catalysts.

Quaternary Oxide of Cerium, Terbium, Praseodymium and Zirconium for Three-Way Catalysts

Oxygen storage-capacity （OSC）, oxygen buffer capacity （OBC）, X-my diffraction and electron diffraction pattern, high resolution electron microscopy were used to study the quaternary oxides, i .e., of Ce, Tb, Pr and Zr. （Ce0.6 Tb0.2Zr0.2O2- δ and Ce0.6Pr0.2Zr0.2O2-δ ）. OSC and OBC data indicate that these oxides have very good oxygen transfer capacity （OTC） and their pseudo-solid solutions exhibit fluorite-type structure. These oxides may act as a good candidate for three-way catalysts （TWC）.

Durability of three-way and close-coupled catalysts for Euro IV regulation

The durability of three-way catalyst （TWC） and corresponding close-coupled catalyst （CCC） for Euro Ⅳ stage regulation was investigated through Vehicle Road Running Mode tests, whereas emissions of regulated pollutants of three car fleet were investigated at every 100,000 km miles. The results showed that HC, NOx, and CO emission values could meet Euro Ⅳ regulation limits at every point. The redox properties of TWC and CCC were measured by CO reduction during each isothermal. It was obvious that both aged TWC and aged CCC behaved a good redox property at 673 and 773 K. Based on XRD and BET measurement results, TWC and CCC washcoat were characterized with good thermal stability.

Novel Oxygen Storage Components Promoted Palladium Catalysts for Emission Control in Natural Gas Powered Engines

A three-way catalyst comprised novel oxygen storage components for emission control in natural gas powered engines was prepared. The addition of novel oxygen storage components to the Pd/γ-Al2O3 catalysts resulted in improved activities of the fresh and aged catalyst by lowering the light-off temperature for methane in natural gas engines exhaust.

Influence of Ce_(0.35)Zr_(0.55)Y_(0.10) Solid Solution on Performance of Pt-Rh Three-Way Catalysts

Ce0.35Zr0.55Y0. 10 solid solution was prepared by co-precipitation technique and characterized by specific surface area measurements （BET） and X-ray diffraction （XRD）. Ce0.35Zr0.55Y0.10 was used to prepare low Pt-Rh threeway catalyst （TWC）, and its influence on the performance of TWC was investigated. The results revealed that Ce0.35 Zr0.55Y0.10 had a cubic structure similar to Ce0.50Zr0.50O2 and its specific surface area can maintain higher than Ce0.50 Zr0.50O2 after 1000 ℃ calcination for 5 h. Being hydrothermal aged at 1000 ℃ for 5 h, the catalyst containing Ce0.35 Zr0.55Y0.10 still exhibited higher conversion of C3H8, CO and NO and lower light-off temperature in comparison with Ce0.50Zr0.50O2 TWC.

Aerobic oxidation assisted by ligand-free palladium catalysts

Aerobic oxidation of electron-rich benzylic and phenyl allylic alcohols was achieved with high yields with only 0.1 mol.% of Pd(OAc)2 catalyst in the absence of any ligand. This procedure was expected to be valuable for realistic industrial-scale applications from both economic as well as environmental points of view.

Nation-Teflon bimembrane-supported palladium catalysts for Suzuki coupling reactions

Nation-Teflon bimembrane was used as an efficient support for the preparation and application of heterogeneous palladium catalysts. The supported palladium catalysts exhibit high activity and stability in the Suzuki cross-coupling of aryl bromides with arylboronic acids to afford the corresponding biaryls in good to excellent yields, and can be readily recovered and reused several times without significant loss of activity.

POLYMERIZATION OF A NEW SUBSTITUTED ACETYLENE BEARING A FURAN RING WITH PALLADIUM ACETYLIDE CATALYSTS

A substituted polyacetylene bearing a furan ring, poly(2-propynyl 2-furoate) (PPF), was synthesized for the first time with palladium acetylide complex catalysts in CHCl3 at 60°C to give a soluble and stable polymer with a yield of ca. 75%. Some features for polymerization of 2-propynyl 2-furoate are described and discussed. The resulting polymer was characterized by IR, GPC and 1H-NMR analysis.

Nitric Oxide Reduction Performance of Automotive Palladium Catalysts

Activity of three-way palladium catalyst was examined by means of a pulse-flam-microreactor. The effects of cerium on the catalytic properties of gamma-alumina-supported palladium for the reduction of nitric oxide were studied with X-ray photoelectron spectroscopy (XPS) and temperature-programmed reduction (TPR). The reduction of nitric oxide on palladium catalysts is inhibited significantly by hydrocarbon. However, the reduction of nitric oxide was improved by the addition of cerium to the catalysts. The XPS and TPR studies showed that the presence of cerium provided, palladium oxide in a hard-reduced state and suppressed the chemisorption of hydrocarbons on the palladium oxide. Additionally,cerium could increase surface specific oxygen storage capacity and decrease the apparent activation energy for the rea;ltion CO+NO-->CO2-+-1/2 N-2. So a high conversion of NOx reduction could shift to higher A/F ratio.

Ceria-Modified Clay Supported Palladium Catalysts for Complete Oxidation of Volatile Organic Compounds

Ceria- and alumina-pillared interlayered clays were synthesized in the presence of PEO surfactant by using laponite clay as raw material.And the synthesized pillared clays were used as supports to load palladium catalysts for complete oxidation of benzene.Nitrogen adsorption/desorption experiments reveal that the pillared clays have higher tests show that ceria pillar exhibited promoting effect on the activity of the palladium catalysts, and ceria-pillared clay supported palladium catalyst catalyzed the complete oxidation of benzene at less than 250 ℃.The calcination temperature affects the activity of the catalysts significantly, and it is found that the optimal calcination temperature are 600 and 400 ℃ for ceria- and alumina-pillared clay supported palladium catalysts, respectively.

Use of Ionic Liquids in Recycle of Palladium Catalysts for Synthesis of Polyketone

Room temperature ionic liquids as solvents for palladium-catalyzed copolymerization of carbon monoxide and styrene were prepared by reaction of aqueous lead tetrafluoroborate with correspond-ing chloride or bromide salts. The recyclability of palladium composite catalyst in various ionic liquids was investigated. [Pd(bipy)2][BF4]2 showed a lower catalytic activity than [Pd(bipy)2][PF6]2 in similar conditions, although the catalytic activity of each composite catalyst in ionic liquids still existed after 4 successive recycles. It was shown the catalytic activity of palladium composite catalyst was higher than that of the catalyst formed in situ from palladium acetate, 2,2′-bipyridyl, and HA (A=PF6-, BF4-) in ionic liquids. The effects of volume of ionic liquids, reaction time, and the dosage of benzoquinone on the copolymerization were also studied.

Effect of Sulfur on the Performance of Three-Way Catalysts

Sulfur content is one of the fuel properties to be monitored. Sulfur dioxide, the major product derived from organic sulfur compounds in the exhaust gas emissions, is a poison to the three-way catalysts (TWC). A gas mixture was applied to simulate the exhaust gases used in the TWC aging procedure tests. Two types of the TWC, REX-IIC and REX-IID, were tested in this study. The performance of both TWC's before and after the 100-hour sulfur aging program was compared. It was concluded that the Pt component in the TWC was apt to be poisoned by sulfur much easily than Rh. The performance of the REX-IID catalyst was generally better than that of the REX-IIC catalyst.

Pd/ZnO catalysts with different origins for high chemoselectivity in acetylene semi-hydrogenation

The heterogeneity of active sites is the main obstacle for selectivity control in heterogeneous catalysis.Single atom catalysts（SACs） with homogeneous isolated active sites are highly desired in chemoselective transformations. In this work, a Pd1/ZnO catalyst with single‐atom dispersion of Pd active sites was achieved by decreasing the Pd loading and reducing the sample at a relatively low temperature. The Pd1/ZnO SAC exhibited excellent catalytic performance in the chemoselective hydrogenation of acetylene with comparable chemoselectivity to that of PdZn intermetallic catalysts and a greatly enhanced utilization of Pd metal. Such unusual behaviors of the Pd1/ZnO SAC in acetylene semi‐hydrogenation were ascribed to the high‐valent single Pd active sites, which could promote electrostatic interactions with acetylene but restrain undesired ethylene hydrogenation via the spatial restrictions of σ‐chemical bonding toward ethylene.

Selective hydrogenation of phenol to cyclohexanone in water over Pd catalysts supported on Amberlyst-45

A series of Pd catalysts were prepared on different supports（Fe2O3,SiO2,ZnO,MgO,Al2O3,carbon,and Amberlyst-45） and used in the selective hydrogenation of phenol to cyclohexanone in water.The Amberlyst-45 supported Pd catalyst（Pd/A-45） was highly active and selective under mild conditions（40-100 ℃,0.2-1 MPa）,giving a selectivity of cyclohexanone higher than 89%even at complete conversion of phenol.Experiments with different Pd loadings（or different particle sizes） confirmed that the formation of cyclohexanone was a structure sensitive reaction,and Pd particles of12-14 nm on Amberlyst-45 gave better selectivity and stability.

The structure–activity relationships of Rh/CeO_(2)-ZrO_(2) catalysts based on Rh metal size effect in the three-way catalytic reactions

With the continuous tightening of automotive emission regulations and the increasing promotion of energy-efficient hybrid vehicles,new challenges have arisen for the low-temperature performance of three-way catalysts(TWCs).To guide the design of next-generation TWCs,it is essential to further develop our understanding of the relationships between microstructure and catalytic performance.Here,Rh/CeO_(2)–ZrO_(2) catalysts were synthesized with different Rh metal dispersion by using a combination of the wet impregnation method and reduction treatment.These catalysts included Rh single-atom catalysts,cluster catalysts,and nanoparticle catalysts.The results showed that the Rh nanoparticle catalyst,with an average size of 1.9 nm,exhibited superior three-way catalytic performance compared to the other catalysts.Based on the catalytic activity in a series of simple reaction atmospheres such as CO+O_(2),NO+CO,and hydrocarbons(HCs)+O_(2) and operando infrared spectroscopy,we found that metallic Rh sites on Rh nanoparticles are the key factor responsible for the low-temperature catalytic performance.

Promotional effects of Sb on Pd-based catalysts for the direct synthesis of hydrogen peroxide at ambient pressure

TiO2‐supported Pd‐Sb bimetallic catalysts were prepared and evaluated for the direct synthesis of H2O2 at ambient pressure.The addition of Sb to Pd significantly enhanced catalytic performance,and a Pd50Sb catalyst showed the greatest selectivity of up to 73%.Sb promoted the dispersion of Pd on TiO2,as evidenced by transmission electron microscopy and X‐ray diffraction.X‐ray photoelectron spectroscopy indicated that the oxidation of Pd was suppressed by Sb.In addition,Sb2O3 layers were formed and partially wrapped the surfaces of Pd catalysts,thus suppressing the activation of H2 and subsequent hydrogenation of H2O2.In situ diffuse reflection infrared Fourier transform spectroscopy for CO adsorption suggested that Sb homogenously located on the surface of Pd‐Sb catalysts and isolated contiguous Pd sites,resulting in the rise of the ratio of Pd monomer sites that are favorable for H2O2 formation.As a result,the Sb modified Pd surfaces significantly enhanced the non‐dissociative activation of O2 and H2O2 selectivity.