A sound speed profile plays an important role in shallow water sound propagation.Concurrent with in-situ measurements,many inversion methods,such as matched-field inversion,have been put forward to invert the sound sp...A sound speed profile plays an important role in shallow water sound propagation.Concurrent with in-situ measurements,many inversion methods,such as matched-field inversion,have been put forward to invert the sound speed profile from acoustic signals.However,the time cost of matched-field inversion may be very high in replica field calculations.We studied the feasibility and robustness of an acoustic tomography scheme with matched-field processing in shallow water,and described the sound speed profile by empirical orthogonal functions.We analyzed the acoustic signals from a vertical line array in ASIAEX2001 in the East China Sea to invert sound speed profiles with estimated empirical orthogonal functions and a parallel genetic algorithm to speed up the inversion.The results show that the inverted sound speed profiles are in good agreement with conductivity-temperature-depth measurements.Moreover,a posteriori probability analysis is carried out to verify the inversion results.展开更多
We use the pruned-enriched Rosenbluth method to investigate systematically the segment density profiles of compact polymer chains confined between two parallel plane walls. The non-adsorption case of adsorption intera...We use the pruned-enriched Rosenbluth method to investigate systematically the segment density profiles of compact polymer chains confined between two parallel plane walls. The non-adsorption case of adsorption interaction energy ε = 0 and the weak adsorption case of ε= -1 are considered for the compact polymer chains with different chain lengths N and different separation distances between two walls D. Several special entropy effects on the confined compact polymer chains, such as a damped oscillation in the segment density profile for the large separation distance D, are observed and discussed for different separation distances D in the non-adsorption case. In the weak adsorption case, investigations on the segment density profiles indicate that the competition between the entropy and adsorption effects results in an obvious depletion layer. Moreover, the scaling laws of the damped oscillation period Td and the depletion layer width Ld are obtained for the confined compact chains. Most of these results are obtained for the first time so far as we know, which are expected to understand the properties of the confined compact polymer chains more completely.展开更多
Objective Focusing on the problem such as slow scanning speed, complex system design and low light efficiency, a new parallel confocal 3D profile detecting method based on optical fiber technology, which realizes whol...Objective Focusing on the problem such as slow scanning speed, complex system design and low light efficiency, a new parallel confocal 3D profile detecting method based on optical fiber technology, which realizes whole-field confocal detecting, is proposed. Methods The optical fiber plate generates an 2D point light source array, which splits one light beam into N2 subbeams and act the role of pinholes as point source and point detecting to filter the stray light and reflect light. By introducing the construction and working principle of the multi-beam 3D detecting system, the feasibility is investigated. Results Experiment result indicates that the optical fiber technology is applicable in parallel confocal detecting. Conclusion The equipment needn't mechanical rotation. The measuring parameters that influence the detecting can easily be adapted to satisfy different requirments of measurement. Compared with the conventional confocal method, the parallel confocal detecting system using optical fiber plate is simple in the mechanism, the measuring field is larger and the speed is faster.展开更多
The study of the migration characteristics of turbulent jets has become relevant as they are used in a variety of engineering devices and are encountered in combustion, chemical processes, and processes involving cool...The study of the migration characteristics of turbulent jets has become relevant as they are used in a variety of engineering devices and are encountered in combustion, chemical processes, and processes involving cooling, mixing, and drying. In several applications, especially in the case of hot streaks in gas turbines, the knowledge of mixing phenomena becomes crucial from a design perspective. The purpose of this study is to look into the characteristics of a round hot jet in a parallel air flow. A jet of hot air injected through a nozzle into a flow of cold air has been considered. Numerical simulations were carried out with different hot jet temperatures and two different Reynold’s numbers, thus aiming at understanding the effect of initial conditions on the mixing of the jet. The temperature profiles were studied at different sections downstream of the nozzle. The results are presented in non-dimensional form.展开更多
Compared with the traditional scanning confocal microscopy, the effect of various factors on characteristic in multi-beam parallel confocal system is discussed, the error factors in multi-beam parallel confocal system...Compared with the traditional scanning confocal microscopy, the effect of various factors on characteristic in multi-beam parallel confocal system is discussed, the error factors in multi-beam parallel confocal system are analyzed. The factors influencing the characteristics of the multi-beam parallel confocal system are discussed. The construction and working principle of the non-scanning 3D detecting system is introduced, and some experiment results prove the effect of various factors on the detecting system.展开更多
A multi-beam chirp sonar based on IP connections and DSP processing nodes was proposed and designed to provide an expandable system with high-speed processing and mass-storage of real-time signals for multi-beam profi...A multi-beam chirp sonar based on IP connections and DSP processing nodes was proposed and designed to provide an expandable system with high-speed processing and mass-storage of real-time signals for multi-beam profiling sonar.The system was designed for seabed petroleum pipeline detection and orientation,and can receive echo signals and process the data in real time,refreshing the display 10 times per second.Every node of the chirp sonar connects with data processing nodes through TCP/IP. Merely by adding nodes,the system’s processing ability can be increased proportionately without changing the software.System debugging and experimental testing proved the system to be practical and stable.This design provides a new method for high speed active sonar.展开更多
基金Supported by the Knowledge Innovation Program of the Chinese Academy of Sciences (No.KZCX1-YW-12-02)the National Natural Science Foundation of China (Nos.10974218,10734100)
文摘A sound speed profile plays an important role in shallow water sound propagation.Concurrent with in-situ measurements,many inversion methods,such as matched-field inversion,have been put forward to invert the sound speed profile from acoustic signals.However,the time cost of matched-field inversion may be very high in replica field calculations.We studied the feasibility and robustness of an acoustic tomography scheme with matched-field processing in shallow water,and described the sound speed profile by empirical orthogonal functions.We analyzed the acoustic signals from a vertical line array in ASIAEX2001 in the East China Sea to invert sound speed profiles with estimated empirical orthogonal functions and a parallel genetic algorithm to speed up the inversion.The results show that the inverted sound speed profiles are in good agreement with conductivity-temperature-depth measurements.Moreover,a posteriori probability analysis is carried out to verify the inversion results.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.20274040,20574052)the Program for New Century Excellent Talents in Universities(No.NCET-05-0538)+1 种基金the Natural Science Foundation of Zhejiang Province(Nos.R404047,Y405011,Y405553)China Postdoctoral Science Foundation(No.20060401064).
文摘We use the pruned-enriched Rosenbluth method to investigate systematically the segment density profiles of compact polymer chains confined between two parallel plane walls. The non-adsorption case of adsorption interaction energy ε = 0 and the weak adsorption case of ε= -1 are considered for the compact polymer chains with different chain lengths N and different separation distances between two walls D. Several special entropy effects on the confined compact polymer chains, such as a damped oscillation in the segment density profile for the large separation distance D, are observed and discussed for different separation distances D in the non-adsorption case. In the weak adsorption case, investigations on the segment density profiles indicate that the competition between the entropy and adsorption effects results in an obvious depletion layer. Moreover, the scaling laws of the damped oscillation period Td and the depletion layer width Ld are obtained for the confined compact chains. Most of these results are obtained for the first time so far as we know, which are expected to understand the properties of the confined compact polymer chains more completely.
文摘Objective Focusing on the problem such as slow scanning speed, complex system design and low light efficiency, a new parallel confocal 3D profile detecting method based on optical fiber technology, which realizes whole-field confocal detecting, is proposed. Methods The optical fiber plate generates an 2D point light source array, which splits one light beam into N2 subbeams and act the role of pinholes as point source and point detecting to filter the stray light and reflect light. By introducing the construction and working principle of the multi-beam 3D detecting system, the feasibility is investigated. Results Experiment result indicates that the optical fiber technology is applicable in parallel confocal detecting. Conclusion The equipment needn't mechanical rotation. The measuring parameters that influence the detecting can easily be adapted to satisfy different requirments of measurement. Compared with the conventional confocal method, the parallel confocal detecting system using optical fiber plate is simple in the mechanism, the measuring field is larger and the speed is faster.
文摘The study of the migration characteristics of turbulent jets has become relevant as they are used in a variety of engineering devices and are encountered in combustion, chemical processes, and processes involving cooling, mixing, and drying. In several applications, especially in the case of hot streaks in gas turbines, the knowledge of mixing phenomena becomes crucial from a design perspective. The purpose of this study is to look into the characteristics of a round hot jet in a parallel air flow. A jet of hot air injected through a nozzle into a flow of cold air has been considered. Numerical simulations were carried out with different hot jet temperatures and two different Reynold’s numbers, thus aiming at understanding the effect of initial conditions on the mixing of the jet. The temperature profiles were studied at different sections downstream of the nozzle. The results are presented in non-dimensional form.
基金This project is supported by National Natural Science Foundation of China (No.50175024)Provincial Program for Young Teacher of Colleges and Universities of Anhui(No.2005jql019)Provincial Research Foundation of Key Laboratory of Anhui.
文摘Compared with the traditional scanning confocal microscopy, the effect of various factors on characteristic in multi-beam parallel confocal system is discussed, the error factors in multi-beam parallel confocal system are analyzed. The factors influencing the characteristics of the multi-beam parallel confocal system are discussed. The construction and working principle of the non-scanning 3D detecting system is introduced, and some experiment results prove the effect of various factors on the detecting system.
基金the National High Technology Project of China Foundation under Grant No.2002AA602230-1
文摘A multi-beam chirp sonar based on IP connections and DSP processing nodes was proposed and designed to provide an expandable system with high-speed processing and mass-storage of real-time signals for multi-beam profiling sonar.The system was designed for seabed petroleum pipeline detection and orientation,and can receive echo signals and process the data in real time,refreshing the display 10 times per second.Every node of the chirp sonar connects with data processing nodes through TCP/IP. Merely by adding nodes,the system’s processing ability can be increased proportionately without changing the software.System debugging and experimental testing proved the system to be practical and stable.This design provides a new method for high speed active sonar.