The synchronous tracking control problem of a hydraulic parallel manipulator with six degrees of freedom (DOF) is complicated since the inclusion of hydraulic elements increases the order of the system.To solve this p...The synchronous tracking control problem of a hydraulic parallel manipulator with six degrees of freedom (DOF) is complicated since the inclusion of hydraulic elements increases the order of the system.To solve this problem,cascade control method with an inner/outer-loop control structure is used,which masks the hydraulic dynamics with the inner-loop so that the designed controller takes into account of both the mechanical dynamics and the hydraulic dynamics of the manipulator.Furthermore,a cross-coupling control approach is introduced to the synchronous tracking control of the manipulator.The position synchronization error is developed by considering motion synchronization between each actuator joint and its adjacent ones based on the synchronous goal.Then,with the feedback of both position error and synchronization error,the tracking is proven to guarantee that both the position errors and synchronization errors asymptotically converge to zero.Moreover,the effectiveness of the proposed approach is verified by the experimental results performed with a 6-DOF hydraulic parallel manipulator.展开更多
The vertical position of plasma in the HT-7U Tokamak is inherently unstable. In order to realize active stabilization, the response rate of the high-power high-frequency amplifier feeding the active control coils must...The vertical position of plasma in the HT-7U Tokamak is inherently unstable. In order to realize active stabilization, the response rate of the high-power high-frequency amplifier feeding the active control coils must be fast enough. This paper analyzes the paralleling scheme of the power amplifier through two kinds of control mode. One is the synchronous control; the other is the asynchronous control. Via the comparison of the two kinds of control mode, both of their characteristics are given in the text. At last, the analyzed result is verified by a small power experiment.展开更多
Recently, linear motors can have high speed control, high acceleration-deceleration. So linear motors are widely used in industrial applications such as precision machine tools. In our laboratory focusing on transport...Recently, linear motors can have high speed control, high acceleration-deceleration. So linear motors are widely used in industrial applications such as precision machine tools. In our laboratory focusing on transport system, we propose parallel synchronous drive of used the PM-LSM （permanent magnet linear synchronous motor）. It can pass luggage without having to stop the working. When you establish ＂parallel synchronous drive＂, a motor follows the other motor. In our laboratory, one of the motors is called ＂master motor＂ and the other motor called ＂slave motor＂. The master motor＇s speed and position pass slave motor then establish parallel synchronous drive. Therefore, slave motor requires high-responsive and precision that follows the master motor. This paper focuses on the control of the slave motor.展开更多
Communication optimization is very important for imporoving performance of parallel programs A communication optimization method called HVMP(Half Vector Message Ripelining) is presented. In comparison with the widelyu...Communication optimization is very important for imporoving performance of parallel programs A communication optimization method called HVMP(Half Vector Message Ripelining) is presented. In comparison with the widelyused vector message pipelining, HVMP can get better tradeoff between reducing and hiding communication overhead,and eliminate the communication barrier of barrier synchronization problems[1]. For parallel Systems with low bandwidth such as cluster of workstations and barrier synchronization problems with large amount of communication, HVMPmethod can get good performance.展开更多
Considering the special characteristics of the redundant parallel manipulator, with emphasis on the variable of structure, the relatively small workspace and the strong coupling relationship among arms, a synchronizat...Considering the special characteristics of the redundant parallel manipulator, with emphasis on the variable of structure, the relatively small workspace and the strong coupling relationship among arms, a synchronization control strategy is presented in this paper. Since in the feedforward, the inertial and the coriolis matrix are designed constant according to the relatively small workspace, position measurement of the endeffector in plane is ignored. Synchronization error and coupling error are introduced to reject the model errors of inertial and coriolis matrix as stated above. Using the method, the errors of driving arms can be reduced, and the synchronization performance among axes can be improved. The stability of the controllers was proved by Lyapunov method. Finally, experimental results show the feasibility of the method.展开更多
基金Project(50375139) supported by the National Natural Science Foundation of ChinaProject(NCET-04-0545) supported by the New Century Excellent Talent Plan of the Ministry of Education of China
文摘The synchronous tracking control problem of a hydraulic parallel manipulator with six degrees of freedom (DOF) is complicated since the inclusion of hydraulic elements increases the order of the system.To solve this problem,cascade control method with an inner/outer-loop control structure is used,which masks the hydraulic dynamics with the inner-loop so that the designed controller takes into account of both the mechanical dynamics and the hydraulic dynamics of the manipulator.Furthermore,a cross-coupling control approach is introduced to the synchronous tracking control of the manipulator.The position synchronization error is developed by considering motion synchronization between each actuator joint and its adjacent ones based on the synchronous goal.Then,with the feedback of both position error and synchronization error,the tracking is proven to guarantee that both the position errors and synchronization errors asymptotically converge to zero.Moreover,the effectiveness of the proposed approach is verified by the experimental results performed with a 6-DOF hydraulic parallel manipulator.
基金The project supported by the National Meg-Science Engineering Project of Chinese Goverment
文摘The vertical position of plasma in the HT-7U Tokamak is inherently unstable. In order to realize active stabilization, the response rate of the high-power high-frequency amplifier feeding the active control coils must be fast enough. This paper analyzes the paralleling scheme of the power amplifier through two kinds of control mode. One is the synchronous control; the other is the asynchronous control. Via the comparison of the two kinds of control mode, both of their characteristics are given in the text. At last, the analyzed result is verified by a small power experiment.
文摘Recently, linear motors can have high speed control, high acceleration-deceleration. So linear motors are widely used in industrial applications such as precision machine tools. In our laboratory focusing on transport system, we propose parallel synchronous drive of used the PM-LSM （permanent magnet linear synchronous motor）. It can pass luggage without having to stop the working. When you establish ＂parallel synchronous drive＂, a motor follows the other motor. In our laboratory, one of the motors is called ＂master motor＂ and the other motor called ＂slave motor＂. The master motor＇s speed and position pass slave motor then establish parallel synchronous drive. Therefore, slave motor requires high-responsive and precision that follows the master motor. This paper focuses on the control of the slave motor.
文摘Communication optimization is very important for imporoving performance of parallel programs A communication optimization method called HVMP(Half Vector Message Ripelining) is presented. In comparison with the widelyused vector message pipelining, HVMP can get better tradeoff between reducing and hiding communication overhead,and eliminate the communication barrier of barrier synchronization problems[1]. For parallel Systems with low bandwidth such as cluster of workstations and barrier synchronization problems with large amount of communication, HVMPmethod can get good performance.
基金supported by the Natural Science Foundation of China under Grant No.50775170 and 50805111by Xidian University under Grant No.JY10000904011 and JY10000904006
文摘Considering the special characteristics of the redundant parallel manipulator, with emphasis on the variable of structure, the relatively small workspace and the strong coupling relationship among arms, a synchronization control strategy is presented in this paper. Since in the feedforward, the inertial and the coriolis matrix are designed constant according to the relatively small workspace, position measurement of the endeffector in plane is ignored. Synchronization error and coupling error are introduced to reject the model errors of inertial and coriolis matrix as stated above. Using the method, the errors of driving arms can be reduced, and the synchronization performance among axes can be improved. The stability of the controllers was proved by Lyapunov method. Finally, experimental results show the feasibility of the method.
