Enhanced picosecond terahertz wave generation based on cascade effects in a terahertz parametric generator

Enhanced terahertz wave generation via a Stokes cascade process has been demonstrated using picosecond pulse pumped terahertz parametric generation at 1 kHz repetition rate.Clear cascade saturation of terahertz output was observed,and the corresponding cascade-Stokes spectra were analyzed.The maximum terahertz wave average power was 22μW under a pump power of 30 W,whereas the maximum power conversion efficiency was 8×10^(-7)under a pump power of 21 W.The THz power fluctuation was measured to be about 1%in 20 min.This THz parametric source with a relatively stable output is suitable for a variety of practical applications.

Parametric instability in the pure-quartic nonlinear Schrödinger equation

We study the nonlinear stage of modulation instability(MI)in the non-intergrable pure-quartic nonlinear Schrödinger equation where the fourth-order dispersion is modulated periodically.Using the three-mode truncation,we reveal the complex recurrence of parametric resonance(PR)breathers,where each recurrence is associated with two oscillation periods(PR period and internal oscillation period).The nonlinear stage of parametric instability admits the maximum energy exchange between the spectrum sidebands and central mode occurring outside the MI gain band.

Parametric resonance of axially functionally graded pipes conveying pulsating fluid

Based on the generalized Hamilton's principle,the nonlinear governing equation of an axially functionally graded(AFG)pipe is established.The non-trivial equilibrium configuration is superposed by the modal functions of a simply supported beam.Via the direct multi-scale method,the response and stability boundary to the pulsating fluid velocity are solved analytically and verified by the differential quadrature element method(DQEM).The influence of Young's modulus gradient on the parametric resonance is investigated in the subcritical and supercritical regions.In general,the pipe in the supercritical region is more sensitive to the pulsating excitation.The nonlinearity changes from hard to soft,and the non-trivial equilibrium configuration introduces more frequency components to the vibration.Besides,the increasing Young's modulus gradient improves the critical pulsating flow velocity of the parametric resonance,and further enhances the stability of the system.In addition,when the temperature increases along the axial direction,reducing the gradient parameter can enhance the response asymmetry.This work further complements the theoretical analysis of pipes conveying pulsating fluid.

Harmonic balance simulation of the influence of component uniformity and reliability on the performance of a Josephson traveling wave parametric amplifier

A Josephson traveling wave parametric amplifier(JTWPA),which is a quantum-limited amplifier with high gain and large bandwidth,is the core device of large-scale measurement and control systems for quantum computing.A typical JTWPA consists of thousands of Josephson junctions connected in series to form a transmission line and hundreds of shunt LC resonators periodically loaded along the line for phase matching.Because the variation of these capacitors and inductors can be detrimental to their high-frequency characteristics,the fabrication of a JTWPA typically necessitates precise processing equipment.To guide the fabrication process and further improve the design for manufacturability,it is necessary to understand how each electronic component affects the amplifier.In this paper,we use the harmonic balance method to conduct a comprehensive study on the impact of nonuniformity and fabrication yield of the electronic components on the performance of a JTWPA.The results provide insightful and scientific guidance for device design and fabrication processes.

Modularized and Parametric Modeling Technology for Finite Element Simulations of Underground Engineering under Complicated Geological Conditions

The surrounding geological conditions and supporting structures of underground engineering are often updated during construction,and these updates require repeated numerical modeling.To improve the numerical modeling efficiency of underground engineering,a modularized and parametric modeling cloud server is developed by using Python codes.The basic framework of the cloud server is as follows:input the modeling parameters into the web platform,implement Rhino software and FLAC3D software to model and run simulations in the cloud server,and return the simulation results to the web platform.The modeling program can automatically generate instructions that can run the modeling process in Rhino based on the input modeling parameters.The main modules of the modeling program include modeling the 3D geological structures,the underground engineering structures,and the supporting structures as well as meshing the geometric models.In particular,various cross-sections of underground caverns are crafted as parametricmodules in themodeling program.Themodularized and parametric modeling program is used for a finite element simulation of the underground powerhouse of the Shuangjiangkou Hydropower Station.This complicatedmodel is rapidly generated for the simulation,and the simulation results are reasonable.Thus,this modularized and parametric modeling program is applicable for three-dimensional finite element simulations and analyses.

Meta-Auto-Decoder:a Meta-Learning-Based Reduced Order Model for Solving Parametric Partial Differential Equations

Many important problems in science and engineering require solving the so-called parametric partial differential equations(PDEs),i.e.,PDEs with different physical parameters,boundary conditions,shapes of computational domains,etc.Typical reduced order modeling techniques accelerate the solution of the parametric PDEs by projecting them onto a linear trial manifold constructed in the ofline stage.These methods often need a predefined mesh as well as a series of precomputed solution snapshots,and may struggle to balance between the efficiency and accuracy due to the limitation of the linear ansatz.Utilizing the nonlinear representation of neural networks(NNs),we propose the Meta-Auto-Decoder(MAD)to construct a nonlinear trial manifold,whose best possible performance is measured theoretically by the decoder width.Based on the meta-learning concept,the trial manifold can be learned in a mesh-free and unsupervised way during the pre-training stage.Fast adaptation to new(possibly heterogeneous)PDE parameters is enabled by searching on this trial manifold,and optionally fine-tuning the trial manifold at the same time.Extensive numerical experiments show that the MAD method exhibits a faster convergence speed without losing the accuracy than other deep learning-based methods.

Research on Urban Building Parametric Modelling Method Based on CityEngine

With the advancement of technology and the development of cities,urban planning and management methods are also constantly improving.From paper-based assignments to modern digitization,new technologies have enabled more efficient design and management for cities.3D modeling can used to simulate the urban environment,which can assist in urban planning and management.However,large-scale modeling cannot be achieved through existing modeling methods,and there are still some shortcomings in the maintenance of the model.Therefore,this article proposes a Computer Generated Architecture(CGA)parametric 3D modeling method based on CityEngine.Research on expanding and customizing modeling rules to create indoor and outdoor modeling rule templates for buildings and methods for generating urban 3D models have been carried out.The results have shown that the completed model can be displayed on different platforms thanks to parameterized modeling.The model can be modified easily and directly applied to the analysis and decision-making of urban planning schemes.

Comparison of Type I Error Rates of Siegel-Tukey and Savage Tests among Non-Parametric Tests

This study aimed to examine the performance of the Siegel-Tukey and Savage tests on data sets with heterogeneous variances. The analysis, considering Normal, Platykurtic, and Skewed distributions and a standard deviation ratio of 1, was conducted for both small and large sample sizes. For small sample sizes, two main categories were established: equal and different sample sizes. Analyses were performed using Monte Carlo simulations with 20,000 repetitions for each scenario, and the simulations were evaluated using SAS software. For small sample sizes, the I. type error rate of the Siegel-Tukey test generally ranged from 0.045 to 0.055, while the I. type error rate of the Savage test was observed to range from 0.016 to 0.041. Similar trends were observed for Platykurtic and Skewed distributions. In scenarios with different sample sizes, the Savage test generally exhibited lower I. type error rates. For large sample sizes, two main categories were established: equal and different sample sizes. For large sample sizes, the I. type error rate of the Siegel-Tukey test ranged from 0.047 to 0.052, while the I. type error rate of the Savage test ranged from 0.043 to 0.051. In cases of equal sample sizes, both tests generally had lower error rates, with the Savage test providing more consistent results for large sample sizes. In conclusion, it was determined that the Savage test provides lower I. type error rates for small sample sizes and that both tests have similar error rates for large sample sizes. These findings suggest that the Savage test could be a more reliable option when analyzing variance differences.

Suppression strategy for parametrically excited lateral vibration of mass-loaded string

This paper discusses a simple way to suppress the parametrically excited lateral vibration of a mass-loaded string. Supposing that the mass at the lower end of the string is subjected to a vertical harmonic excitation and neglecting the higher order vibration modes, the equation of motion for the mass-loaded string can be represented by a Mathieus equation with cubic nonlinearity. According to the theory of the Mathieus equation, in the mass-loaded string system, when the vertical vibration frequency of the mass approaches twice the natural frequency of the string lateral vibration, once the vertical vibration amplitude of the mass exceeds a critical value, the parametric resonance will occur in the string. To avoid the parametric resonance, a vibration absorber, composed of a thin beam and two mass blocks attached at both sides of the beam symmetrically, is proposed to install with the mass to reduce its vertical vibration, and ultimately suppress the lateral vibration of the string. Such a suppression strategy is finally validated by experiments.

Dynamic stability of parametrically-excited linear resonant beams under periodic axial force

The parametric dynamic stability of resonant beams with various parameters under periodic axial force is studied. It is assumed that the theoretical formulations are based on Euler-Bernoulli beam theory. The governing equations of motion are derived by using the Rayleigh-Ritz method and transformed into Mathieu equations, which are formed to determine the stability criterion and stability regions for parametricallyexcited linear resonant beams. An improved stability criterion is obtained using periodic Lyapunov functions. The boundary points on the stable regions are determined by using a small parameter perturbation method. Numerical results and discussion are presented to highlight the effects of beam length, axial force and damped coefficient on the stability criterion and stability regions. While some stability rules are easy to anticipate, we draw some conclusions： with the increase of damped coefficient, stable regions arise; with the decrease of beam length, the conditions of the damped coefficient arise instead. These conclusions can provide a reference for the robust design of parametricallyexcited linear resonant sensors.

Classification of parametrically constrained bifurcations

If the constraint boundary relates to a bifurcation parameter, a bifurcation is said to be parametrically constrained. Relying upon some substitution, a parametrically constrained bifurcation is transformed to an unconstrained bifurcation about new variables. A general form of transition sets of the parametrically constrained bifurcation is derived. The result indicates that only the constrained bifurcation set is influenced by parametric constraints, while other transition sets are the same as those of the corresponding nonparametrically constrained bifurcation. Taking parametrically constrained pitchfork bifurcation problems as examples, effects of parametric constraints on bifurcation classification are discussed.

RESPONSE OF PARAMETRICALLY EXCITED DUFFING-VAN DER POL OSCILLATOR WITH DELAYED FEEDBACK

The dynamical behaviour of a parametrically excited Duffing-van der Pol oscillator under linear-plus-nonlinear state feedback control with a time delay is concerned. By means of the method of averaging together with truncation of Taylor expansions, two slow-flow equations on the amplitude and phase of response were derived for the case of principal parametric resonance, it is shown that the stability condition for the trivial solution is only associated with the linear terms in the original systems besides the amplitude and frequency of parametric excitation. And the trivial solution can be stabilized by appreciate choice of gains and time delay in feedback control. Different from the case of the trivial solution, the stability condition for nontrivial solutions is also associated with nonlinear terms besides linear terms in the original system. It is demonstrated that nontrivial steady state responses may lose their stability by saddle-node （SN） or Hopf bifurcation （HB） as parameters vary. The simulations, obtained by numerically integrating the original system, are in good agreement with the analytical results.

Parametrically excited oscillation of stay cable and its control in cable-stayed bridges＂

This paper presents a nonlinear dynamic model for simulation and analysis of a kind of parametrically excited vibration of stay cable caused by support motion in cable-stayed bridges. The sag, inclination angle of the stay cable are considered in the model, based on which, the oscillation mechanism and dynamic response characteristics of this kind of vibration are analyzed through numerical calculation. It is noted that parametrically excited oscillation of a stay cable with certain sag, inclination angle and initial static tension force may occur in cable-stayed bridges due to deck vibration under the condition that the natural frequency of a cable approaches to about half of the first model frequency of the bridge deck system. A new vibration control system installed on the cable anchorage is proposed as a possible damping system to suppress the cable parametric oscillation. The numerical calculation results showed that with the use of this damping system, the cable oscillation due to the vibration of the deck and/or towers will be considerably reduced.

BIFURCATION IN A PARAMETRICALLY EXCITED TWO-DEGREE-OF-FREEDOM NONLINEAR OSCILLATING SYSTEM WITH 1∶2 INTERNAL RESONANCE

The nonlinear response of a two_degree_of_freedom nonlinear oscillating system to parametric excitation is examined for the case of 1∶2 internal resonance and, principal parametric resonance with respect to the lower mode. The method of multiple scales is used to derive four first_order autonomous ordinary differential equations for the modulation of the amplitudes and phases. The steady_state solutions of the modulated equations and their stability are investigated. The trivial solutions lose their stability through pitchfork bifurcation giving rise to coupled mode solutions. The Melnikov method is used to study the global bifurcation behavior, the critical parameter is determined at which the dynamical system possesses a Smale horseshoe type of chaos.

Nonlinear parametrically excited vibration and active control of gear pair system with time-varying characteristic

In the present work, we investigate the nonlinear parametrically excited vibration and active control of a gear pair system involving backlash, time-varying meshing stiffness and static transmission error. Firstly, a gear pair model is established in a strongly nonlinear form, and its nonlinear vibration characteristics are systematically investigated through different approaches. Several complicated phenomena such as period doubling bifurcation, anti period doubling bifurcation and chaos can be observed under the internal parametric excitation. Then, an active compensation controller is designed to suppress the vibration, including the chaos. Finally, the effectiveness of the proposed controller is verified numerically.

ON THE MAXIMAL LYAPUNOV EXPONENT FOR A REAL NOISE PARAMETRICALLY EXCITED CO-DIMENSION TWO BIFURCATION SYSTEM (Ⅱ)

For a co_dimension two bifurcation system on a three_dimensional central manifold, which is parametrically excited by a real noise, a rather general model is obtained by assuming that the real noise is an output of a linear filter system_a zeromean stationary Gaussian diffusion process which satisfies detailed balance condition. By means of the asymptotic analysis approach given by L. Arnold and the expression of the eigenvalue spectrum of Fokker_Planck operator, the asymptotic expansions of invariant measure and maximal Lyapunov exponent for the relevant system are obtained.

ON THE MAXIMAL LYAPUNOV EXPONENT FOR A REAL NOISE PARAMETRICALLY EXCITED CO_DIMENSION TWO BIFURCATION SYSTEM (Ⅰ)

For a real noise parametrically excited co_dimension two bifurcation system on a three_dimensional central manifold, a model of enhanced generality is developed in the present paper by assuming the real noise to be an output of a linear filter system, namely,a zero_mean stationary Gaussian diffusion process that satisfies the detailed balance condition. On such basis, asymptotic expansions of invariant measure and maximal Lyapunov exponent for the relevant system are established by use of Arnold asymptotic analysis approach in parallel with the eigenvalue spectrum of Fokker_Planck operator.

Table-top optical parametric chirped pulse amplifiers: past and present

The generation of power-and wavelength-scalable few optical cycle pulses remains one of the major challenges in modern laser physics.Over the past decade,the development of table-top optical parametric chirped pulse amplificationbased systems was progressing at amazing speed,demonstrating excellent performance characteristics in terms of pulse duration,energy,peak power and repetition rate,which place them at the front line of modern ultrafast laser technology.At present,table-top optical parametric chirped pulse amplifiers comprise a unique class of ultrafast light sources,which currently amplify octave-spanning spectra and produce carrier-envelope phase-stable,few optical cycle pulses with multi-gigawatt to multi-terawatt peak powers and multi-watt average powers,with carrier wavelengths spanning a considerable range of the optical spectrum.This article gives an overview on the state of the art of table-top optical parametric chirped pulse amplifiers,addressing their relevant scientific and technological aspects,and provides a short outlook of practical applications in the growing field of ultrafast science.

Nonlinear optical imaging by detection with optical parametric amplification(invited paper)

Nonlinear optical imaging is a versatile tool that has been proven to be exceptionally useful in various research fields.However,due to the use of photomultiplier tubes(PMTs),the wide application of nonlinear optical imaging is limited by the incapability of imaging under am-bient light.In this paper,we propose and demonstrate a new optical imaging detection method based on optical parametric amplification(OPA).As a nonlinear optical process,OPA in-trinsically rejects ambient light photons by coherence gating.Periodical poled lithium niobate(PPLN)crystals are used in this study as the media for OPA.Compared to bulk nonlinear optical crystals,PPLN crystals support the generation of OPA signal with lower pump power.Therefore,this characteristic of PPLN crystals is particularly beneficial when using high-repetition-rate lasers,which facilitate high-speed optical signal detection,such as in spec-troscopy and imaging.A PPLN-based OPA system was built to amplify the emitted imaging signal from second harmonic generation(SHG)and coherent anti-Stokes Raman scattering(CARS)microscopy imaging,and the amplified optical signal was strong enough to be detected by a biased photodiode under ordinary room light conditions.With OPA detection,ambient-light-on SHG and CARS imaging becomes possible,and achieves a similar result as PMT detection under strictly dark environments.These results demonstrate that OPA can be used as a substitute for PMTs in nonlinear optical imaging to adapt it to various applications with complex.light ing conditions.

Coordinate-Parametric Matrix Model Inspired Square-Conjoint Pattern in Cross Woven for Conventional Bamboo Mat

In the study,it is proposed that a coordinate-parametric matrix model is performed to a square-conjoint pattern of cross woven(SCPCW)in the bamboo mat.The patterns of SCPCW are firstly detected according to the perspective of configuration,which is divided into the basic-monomer shape and the basic combination shape.Secondly,the compositions of design patterns in SCPCW are analyzed to attain the trend of curve shape.Based on the coordinate-parametric matrix model,the specimens of SCPCW are subsequently accomplished to elaborate the woven logic of bamboo mats.The digital innovation of SCPCW,defined by a mathematical resolution,is implemented by the software of Grasshopper(GH),which plays a crucial role in capturing image information by the Image Sampler component.Successively,the weaving logic of coordinated matrix is referred to apply in the computing component of Grasshopper software.Finally,the computer simulation could demonstrate that the coordinate-parametric matrix model of SCPCWwould be realized to analyze the micro-weaving structure and overall weaving effect in the bamboo mat.