PREPARATION OF ULTRAFINE PARTICLE IRON-CARBONIDE CATALYST AND CHARACTERIZATION OF ITS CATALYTICAL BEHAVIOR

Studies on ultrafine particle catalyst have attracted many researchers' attention by its large surface area,higher activity and selectivity.Based on the mechanism of α-Fe and Fe_xC_y as the catalytical active species this paper reports for the first time the preparation method of Fe_3C ultrafine parti- cle catalyst,from highly dispersed amorphous Fe powder and free carbon.The Fe powder and free car- bon,prepared by laser pyrolysis technique,was then treated by washing and heating at high tempera- ture protected with N_2.The catalyst prepared under different experimental conditions was characterazed by means of XRD,electronic diffraction and TEM.It shows that the crystlline grain size is in a range of 1-4nm and composed of Fe_3C and α-Fe.It has been found that the ultrafine particle iron-carbonide catalyst exhibited much higher activity and selectivity to light olefins.At the standard atmosphere and 380℃ reaction temperature,the conversion of CO reached a maximum of 80%.

THE PREPARATION AND CHARACTERIZATION OF ZnO-Ag CORE-SHELL ULTRAFINE PARTICLE

The ZnO-Ag core-shell ultrafine particle in ethanol was prepared by photoreduction and colloidal methods. The experimental results obtained from aboorption spectroscopy. fluorescence sopectroscopy and electron microscopy revealed that the structure of the hybrid wide ig ZnO core covered with Ag shell. The thickness of the silver layer can ho controlled by the concentration of Ag+ ions and the time of UV irradiation. The structure of the electric double layer of the ZnO seed greatly affects the formation of ZnO-Ag hybtid particle.

Droplet Characterization Based on the Simulated Secondary Rainbows

The droplet size, size distribution, refractive index, and temperature can be measured simultaneously by the rainbow technique. In the present work, the rainbow scattering diagram for a spherical droplet in the secondary rainbow region is simulated by the use of the generalized Lorenz-Mie theory. For achieving high spatial resolution in denser droplet sprays, a focused Gaussian beam is used. For droplet characterization, different inversion algorithms are investigated, which includes trough-trough (θmin1 and θmin2) method and inflection-inflection (θinf1 and θinf2) method. For the trough-trough algorithm, the absolute error of the refractive index is between −6.4 × 10−4 and 1.7 × 10−4, and the error of the droplet radius is only between −0.55% and 1.77%. For the inflection-inflection algorithm, the maximum absolute error of the inverted refractive index is less than −1.1 × 10−3. The error of the droplet radius is between −0.75% and 5.67%.

Dissolved metal ion removal by online hollow fiber ultrafiltration for enhanced size characterization of metal-containing nanoparticles with single-particle ICP-MS

Single particle-inductively coupled plasma mass spectrometry (SP-ICP-MS) is a powerful tool for size-characterization of metal-containing nanoparticles (MCNs) at environmentally relevant concentrations,however,coexisting dissolved metal ions greatly interfere with the accuracy of particle size analysis.The purpose of this study is to develop an online technique that couples hollow fiber ultrafiltration (HFUF) with SP-ICP-MS to improve the accuracy and size detection limit of MCNs by removing metal ions from suspensions of MCNs.Through systematic optimization of conditions including the type and concentration of surfactant and complexing agent,carrier pH,and ion cleaning time,HFUF completely removes metal ions but retains the MCNs in suspension.The optimal conditions include using a mixture of 0.05 vol.%FL-70 and 0.5 mmol/L Na2S2O_(3)(pH=8.0) as the carrier and 4 min as the ion cleaning time.At these conditions,HFUF-SP-ICP-MS accurately determines the sizes of MCNs,and the results agree with the size distribution determined by transmission electron microscopy,even when metal ions also are present in the sample.In addition,reducing the ionic background through HFUF also lowers the particle size detection limit with SP-ICP-MS (e.g.,from 28.3 to 14.2 nm for gold nanoparticles).This size-based ion-removal principle provided by HFUF is suitable for both cations (e.g.,Ag+) and anions (e.g.,AuCl_(4)^(-)) and thus has good versatility compared to ion exchange purification and promising prospects for the removal of salts and macromolecules before single particle analysis.

The EXAFS and IR characterization of Rh particles derived from NaY-zeolite entrapped Rh_6(CO)_(16)in CO and H_2 chemisorption

Metal clusters made of neighbouring metal centers with unique structures and stabilizedon a support may provide well-defined heterogeneous catalysts.The idea of constructingthese metal clusters in zeolite cages has been coined as synthesis by a “ship-in-bottle” technique.Here,we report on the structural characterization and chemisorption behavior of NaY zeolite

On-line full scan inspection of particle size and shape using digital image processing

An on-line full scan inspection system is developed for particle size analysis. A particle image is first obtained through optical line scan technology and is then analyzed using digital image processing. The system is composed of a particle separation module, an image acquisition module, an image processing module, and an electric control module. Experiments are carried out using non-uniform 0.1 mm particles. The main advantage of this system consists of a full analysis of particles without any overlap or miss, thus improving the Area Scan Charge Coupled Device （CCD） acquisition problems. Particle size distribution, roundness, and sphericity can be obtained using the system with a deviation of repeated precision of around ±1%. The developed system is shown to be also convenient and versatile for any particle size and shape for academic and industrial users.

Influence of Ca treatment on particle-microstructure relationship in heat-affected zone of shipbuilding steel with Zr-Ti deoxidation after high-heat-input welding

The effects of Ca treatment on the particle, microstructure, and toughness of heat-affected zone (HAZ) of shipbuilding steel with Zr-Ti deoxidation after high-heat-input welding were investigated. The simulated welding at a high-heat-input welding of 200 kJ/cm was carried out using Gleeble-3800 welding simulation. Then, particle characteristics were characterized using an Aztec-Feature automatic particle analysis system. Additionally, an in-situ observation experiment was performed to study the relationships between particle and microstructure by high-temperature confocal laser scanning microscopy (HT-CLSM). The results indicated that the average HAZ toughness at -40 ℃ was increased from 183 to 290 J by adding 0.0026 wt.% Ca. Meanwhile, the formation of acicular ferrite ratio was increased from 49.34% to 60.28% due to the addition of Ca. The scanning electron microscopy results clearly showed that CaO-Al_(2)O_(3)-TiOx-ZrO_(2)-MnS particles could act as effective nucleation sites for the formation of acicular ferrite, which has been verified by the observation of the particle-microstructure relationship under HT-CLSM. Furthermore, particle characterization results show that the cumulative frequency of particles with the size of 1-3 lm was 33.2% in HAZ of Zr-Ti shipbuilding steel but 66.2% in HAZ of Zr-Ti-Ca shipbuilding steel.

Preparation and characterization of conducting polymer-coated thermally expandable microspheres

The thermally expandable microspheres（TEMs） were prepared via suspension polymerization with acrylonitrile（AN）, methyl methacrylate（MMA） and methyl acrylate（MA） as monomers and n-hexane as the blowing agent. Meanwhile, a novel type of functional and conductive thermal expandable microsphere was obtained through strongly covering the surface of microsphere by conductive polymers with the mass loading of 1.5%. The optimal conditions to prepare high foaming ratio and equally distributed microcapsules were investigated with AN-MMA-MA in the proportion of 70%/20%/10%（m/m/m）, and 25 wt% of n-hexane in oil phase. The further investigation results showed that the unexpanded TEMs were about 30 μm in diameter and the maximum expansion ratio was nearly 125 times of original volume. The polypyrrole（PPy） was smoothly coated on the surface of the TEMs and the expansion property of PPy-coated TEMs was almost the same as the uncoated TEMs. Moreover, the structure and expanding performance of TEMs and PPy-coated TEMs were characterized by scanning electron microscopy（SEM）, laser particle size analyzer and dilatometer（DIL）.

Growth characteristics of spherical titanium oxide nanoparticles during the rapid gaseous detonation reaction

The nanosize grain growth characteristics of spherical single-crystal titanium oxide （TiO2） during the rapid gaseous detonation reaction are discussed. Based on the experimental conditions and the Chapman-Jouguet theory, the Kruis model was introduced to simulate the growth characteristics of spherical TiO2 nanoparticles obtained under high pressure, high temperature and by rapid reaction. The results show that the numerical analysis can satisfactorily predict the growth characteristics of spherical TiO2 nanoparticles with diameters of 15-300 nm at different affecting factors, such as concentration of particles, reaction temperature and time, which are in agreement with the obtained experimental results. We found that the increase of the gas-phase reaction temperature, time, and particle concentration affects the growth tendency of spherical nanocrystal TiO2, which provides effective theoretical support for the controllable synthesis of multi-scale nanoparticles.

Determination of time-and size-dependent fine particle emission with varied oil heating in an experimental kitchen

Particulate matter（PM） from cooking has caused seriously indoor air pollutant and aroused risk to human health.It is urged to get deep knowledge of their spatial-temporal distribution of source emission characteristics,especially ultrafine particles（UFP ＆lt; 100 nm） and accumulation mode particles（AMP 100-555 nm）.Four commercial cooking oils are auto dipped water to simulate cooking fume under heating to 255℃ to investigate PM emission and decay features between 0.03 and 10 μm size dimension by electrical low pressure impactor（ELPI） without ventilation.Rapeseed and sunflower produced high PM_（2.5） around5.1 mg/m^3,in comparison with those of soybean and corn（5.87 and 4.55 mg/m^3,respectively）at peak emission time between 340 and 450 sec since heating oil,but with the same level of particle numbers 6-9 × 10~5/cm^3.Mean values of PM_（1.0）/PM_（2.5） and PM_（2.5）/PM_（10） at peak emission time are around 0.51-0.55 and 0.23-0.29.After 15 min naturally deposition,decay rates of PM_（1.0）,PM_（2.5） and PM_（10） are 13.3%-29.8%,20.1%-33.9%and 41.2%-54.7%,which manifest that PM_（1.0） is quite hard to decay than larger particles,PM_（2.5） and PM_（1.0）.The majority of the particle emission locates at 43 nm with the largest decay rate at 75%,and shifts to a larger size between137 and 555 nm after 15 min decay.The decay rates of the particles are sensitive to the oil type.

METHODS FOR DUSTINESS ESTIMATION OF INDUSTRIAL POWDERS

Handling industrial powders leads to dust emissions. These emissions tend to generate human diseases or cause other environmental effects. A multitude of apparatus has been developed to estimate this dustiness behaviour of powders. Two of these well-known methods are presented and compared with each other. A third recently developed method is also introduced.