Particle Growth in an Experimental Dusty Plasma System

The coagulation and growth process of dust particles is investigated through laboratory experiment in a plasma system. A large number of dust particles with different sizes and shapes are formed. The growth process is characterized by the scattering laser intensity and fractal dimension. The comparisons of dust particles and scattering laser intensity obtained at different rf powers are presented. The three-dimensional distribution of dust particles is also given. These results provide an experimental basis for dust growth investigation.

An experiment for obtaining DOP ellipsoid using particle swarm optimization algorithm

The degree of polarization (DOP) ellipsoid can be used as either feedback or feedforward signal for automatic polarization mode dispersion compensation. We have realized the experiment for obtaining DOP ellipsoid from 100 sampling data of output states of polarization using particle swarm optimization (PSO) as ellipsoid data fitting algorithm. It was shown that the PSO algorithm was powerful for ellipsoid data fitting with high precision within 250 ms.

Coefficient of restitution for particles impacting on wet surfaces： An improved experimental approach

The coefficient of restitution is widely used to characterize the energy dissipation rate in numerical simulations involving particle collisions. The challenge in measuring the coefficient of restitution is the strong scatter seen in experimental data that results from varying particle properties, i.e. shape and surface roughness, and from imperfections in the experimental technique. To minimize this scattering, a novel experimental setup was developed based on two synchronized high-speed cameras capturing the collision behaviour of a particle in three dimensions. To measure the wet restitution coefficient, which describes particle impact in the presence of a liquid layer in the contact region, additional accuracy can be achieved by measuring the liquid layer thickness by a high-precision optical confocal sensor. The coefficient of restitution was measured for glass particles with two different diameters, at different relative velocities and liquid layer thicknesses, with a focus on small collision velocities and thin liquid layers, using both the improved （three dimensional） and the conventional （two dimensional） approaches to quantify the improvement of the new method＇s accuracy.

Experimental observation of surface phonon absorption in Zn fine particles coated with ZnO

FINE particles have attracted much attention in the past few years due to their unique physical and chemical properties. For gas-evaporated fine metallic particles, a thin oxide layer is usually formed on their surface. According to Ruppin’s prediction, a dielectric coating on metallic particles should have a series of surface modes between ωTO and ωLO, the long-wavelength transverse and longitudinal optical phonon frequencies of the dielectric. The frequency of

Mixing and segregation of solid particles in a conical spouted bed： Effect of particle size and density

In this work, the mixing and segregation of binary mixtures of particles with different sizes and densities in a pseudo-2D spouted bed were studied experimentally. A binary mixture of solid particles including sand, gypsum, and polyurethane was used. To determine the particles mass fraction, and their mixing and segregation in the bed, an image-processing technique was developed and used. Important hydrodynamic parameters, such as the axial and radial segregation profiles of the solid particles, were measured. The effects of air velocity, particle size, and particle mass fraction were also evaluated. The flow regime in the spouted bed and the time required for reaching the equilibrium state of the solid particles were discussed. The results showed that the segregation of solid particles and the time to equilibrium both decreased when the air velocity increased to much larger than the minimum spouting velocity. The axia! segregation increased with the diameter ratio of the particles. Upon completion of the test, coarse particles were concentrated mainly in the spout region, while fine particles were aggregated in the annulus region. Examination of the flow pattern in the spouted bed showed that the particles near the wall had longer flow paths, while those near the spout region had shorter flow paths.