Influence of different weather events on concentrations of particulate matter with different sizes in Lanzhou,China

The formation and development of weather events has a great impact on the diffusion, accumulation and transport of air pollutants, and causes great changes in the particulate pollution level. It is very important to study their influence on particulate pollution. Lanzhou is one of the most particulate-polluted cities in China and even in the world. Particulate matter （PM） including TSP, PM〉10, PMzs-10, PM2.5 and PM1.0 concentrations were simultaneously measured during 2005-2007 in Lanzhou to evaluate the influence of three kinds of weather events - dost, precipitation and cold front - on the concentrations of PM with different sizes and detect the temporal evolution. The main results are as follows： （1） the PM pollution in Lanzhou during dust events was very heavy and the rate of increase in the concentration of PM2.5-10 was the highest of the five kinds of particles. During dust-storm events, the highest peaks of the concentrations of fine particles （PM2.5 and PM1.0） occurred 3 hr later than those of coarse particles （PM〉10 and PM/.5-10）. （2） The major effect of precipitation events on PM is wet scavenging. The scavenging rates of particles were closely associated with the kinds of precipitation events. The scavenging rates of TSP, PM〉10 and PMa.5-10 by convective precipitation were several times as high as those caused by frontal precipitation for the same precipitation amount, the reason being the different formation mechanism and precipitation characteristics of the two kinds of precipitation. Moreover, there exists a limiting value for the scavenging rates of particles by precipitation. （3） The major effect of cold-front events on particles is clearance. However, during cold-front passages, the PM concentrations could sometimes rise first and decrease afterwards, which is the critical difference in the influence of cold fronts on the concentrations of particulate pollutants vs. gaseous pollutants.

Air pollution and inhalation exposure to particulate matter of different sizes in rural households using improved stoves in central China

Household air pollution is considered to be among the top environmental risks in China.To examine the performance of improved stoves for reduction of indoor particulate matter（PM） emission and exposure in rural households, individual inhalation exposure to size-resolved PM was investigated using personal portable samplers carried by residents using wood gasifier stoves or improved coal stoves in a rural county in Central China.Concentrations of PM with different sizes in stationary indoor and outdoor air were also monitored at paired sites. The stationary concentrations of size-resolved PM in indoor air were greater than those in outdoor air, especially finer particles PM0.25. The daily averaged exposure concentrations of PM0.25, PM1.0, PM2.5 and total suspended particle for all the surveyed residents were 74.4 ± 41.1, 159.3 ± 74.3, 176.7 ± 78.1 and 217.9 ± 78.1 μg/m3,respectively. Even using the improved stoves, the individual exposure to indoor PM far exceeded the air quality guideline by WHO at 25 μg/m3. Submicron particles PM1.0 were the dominant PM fraction for personal exposure and indoor and outdoor air. Personal exposure exhibited a closer correlation with indoor PM concentrations than that for outdoor concentrations. Both inhalation exposure and indoor air PM concentrations in the rural households with gasifier firewood stoves were evidently lower than the reported results using traditional firewood stoves. However, local governments in the studied rural areas should exercise caution when widely and hastily promoting gasifier firewood stoves in place of improved coal stoves, due to the higher PM levels in indoor and outdoor air and personal inhaled exposure.

Quantifying the characteristics of particulate matters captured by urban plants using an automatic approach

It is widely accepted that urban plant leaves can capture airborne particles. Previous studies on the particle capture capacity of plant leaves have mostly focused on particle mass and/or size distribution. Fewer studies, however, have examined the particle density, and the size and shape characteristics of particles, which may have important implications for evaluating the particle capture efficiency of plants, and identifying the particle sources. In addition, the role of different vegetation types is as yet unclear. Here, we chose three species of different vegetation types, and firstly applied an object-based classification approach to automatically identify the particles from scanning electron microscope（SEM）micrographs. We then quantified the particle capture efficiency, and the major sources of particles were identified. We found（1） Rosa xanthina Lindl（shrub species） had greater retention efficiency than Broussonetia papyrifera（broadleaf species） and Pinus bungeana Zucc.（coniferous species）, in terms of particle number and particle area cover.（2） 97.9% of the identified particles had diameter ≤10 μm, and 67.1% of them had diameter ≤2.5 μm. 89.8% of the particles had smooth boundaries, with 23.4% of them being nearly spherical.（3） 32.4%–74.1% of the particles were generated from bare soil and construction activities, and 15.5%–23.0% were mainly from vehicle exhaust and cooking fumes.

Performance behaviour of elliptical-bore journal bearings lubricated with solid granular particulates

Journal bearings operating in hot environments and at high temperatures experience accelerated degra- dation of lubricating oils. In such situations, dry granular particulates have emerged as potential media for providing lubrication in journal bearings in place of lubricating oils. Granular particulates do not degrade thermally, even at considerably high temperatures. This work explores the static and dynamic perfor- mance characteristics of elliptical-bore journal bearings lubricated with granular particulates. It is found that a bearing lubricated with a larger size （2 μm） particles offers better performance compared with that using smaller size （1μm） particles. Bore ellipticity reduces the load-carrying capacity and increases side leakage and the coefficient of friction; however, rotor stability is marginally improved at low eccentricity ratios （〈0.6）, followed by significant improvement at high eccentricity ratios （〉0.6）.

PM10 emissions from industrial coal-fired chain-grate boilers

Industrial coal-fired boiler is an important air pollutant emission source in China. The chain-grate boiler is the most extensively used type of industrial coal-fired boiler. An electrical low-pressure impactor, and a Dekati？ Low Pressure Impactor were applied to determine mass and number size distributions of PM10 at the inlet and the outlet of the particulate emission control devices at six coalfired chain-grate boilers. The mass size distribution of PM10 generated from coal-fired chain-grate boilers generally displays a bimodal distribution that contains a submicron mode and a coarse mode. The PM in the submicron mode for burning with raw coal contributes to 33% ± 10 % of PM10 emissions, much higher than those for pulverized boilers. And the PM in the submicron mode for burning with briquette contributes up to 86 % of PM10 emissions. Multiclones and scrubbers are not efficient for controlling PM10 emission. Their average collection efficiencies for sub-micron particle and super-micron particle are 34% and 78%, respectively. Operating conditions of industrial steam boilers have influence on PM generation. Peak of the submicron mode during normal operation period is larger than the start-up period.