Effect of partition coefficient on microsegregation during solidification of aluminium alloys

In the modeling of microsegregation, the partition coefficient is usually calculated using data from the equilibrium phase diagrams. The aim of this study was to experimentally and theoretically analyze the partition coefficient in binary aluminum--copper alloys. The sam- ples were analyzed by differential thermal analysis （DTA）, which were melted and quenched from different temperatures during solidifica- tion. The mass fraction and composition of phases were measured by image processing and scanning electron microscopy （SEM） equipped with an energy-dispersive X-ray spectroscopy （EDS） unit. These data were used to calculate as the experimental partition coefficients with four different methods. The experimental and equilibrium partition coefficients were used to model the concentration profile in the primary phase. The modeling results show that the profiles calculated by the experimental partition coefficients are more consistent with the experi- mental profiles, compared to those calculated using the equilibrium partition coefficients.

Structural Characterization and Octanol/water Partition Coefficients(LogP) Prediction for Oxygen-containing Organic Compounds

New descriptors were constructed and structures of some oxygen-containing organic compounds were parameterized. The multiple linear regression（MLR） and partial least squares regression（PLS） methods were employed to build two relationship models between the structures and octanol/water partition coefficients（LogP） of the compounds. The modeling correlation coefficients（R） were 0.976 and 0.922, and the ＂leave one out＂ cross validation correlation coefficients（R（CV）） were 0.973 and 0.909, respectively. The results showed that the structural descriptors could well characterize the molecular structures of the compounds; the stability and predictive power of the models were good.

DFT and Position of Cl Substitution (PCS) Methods Studies on n-Octanol/water Partition Coefficients (lgK_(ow)) and Aqueous Solubility (–lgS_w) of All PCDD Congeners

Optimized calculations of 75 PCDDs and their parent DD were carded out at the B3LYP/6-31G＊ level by density functional theory （DFT） method. The structural parameters were obtained and significant correlation between the C1 substitution position and some structural parameters was found. Consequently, the number of C1 substitution positions was taken as theoretical descriptors to establish two novel QSPR models for predicting lgKow and -lgSw of all PCDD congeners. The two models achieved in this work contain two variables （Na and Nβ）, of which r = 0.9312, 0.9965 and SD = 0.27, 0.12 respectively, and t values are all large. The variation inflation factors （VIF） of variables in the two models herein are both less than 5.0, suggesting high accuracy of the lgKow and -lgSw predicting models, and the results of cross-validation test also show that the two models exhibit optimum stability and good predictive power. By comparison, the correlation and predictive ability of the present work are more advantageous than those obtained using semi-empirical AM1 and GC-RI methods.

Experimental and QSPR Studies on n-Octanol/water Partition Coefficient (lgK_(ow)) of Substituted Aniline

The n-octanol/water partition coefficients （lgKow） of 18 substituted anilines were determined at 25 ℃ by shake-flask method. The geometrical optimization of substituted anilines has been performed at B3LYP/6-311G^＊＊ level with Gaussian98 program, and the molecular surface areas of substituted anilines were calculated using ChemOffice 2004 program. The calculated structural parameters of substituted anilines were used as theoretical descriptors and the two-parameter （molecular surface area （MA） and the energy of the highest occupied molecular orbital （EaoMo）） quantitative structure-property relationship （QSPR） model of lgKow for substituted aniline with molecular structural parameters was developed by multi-linear regression method. The regression coefficient square （r^2） is 0.990 and the standard deviation SE 0.109. The model was validated by variance inflation factors （VIF） and t-test, and the results show that there exists small self-correlation between variables of the model with perfect stability. The model gives results in good qualitative agreement with experimental data. At last, the model was applied to predict lgKow values of five substituted anilines whose lgKow values have not been determined experimentally.

QSPR of n-Octanol/water Partition Coefficient (lgK_(ow)) for Alkyl(1-phenylsulfonyl) Cycloalkane-carboxylates

Quantum chemistry parameters of 28 alkyl（1-phenylsulfonyl） cycloalkane-carboxy-lates were computed at the 6-31G＊ level in fully optimal manner using B3LYP method of density functional theory （DFT）. With GQSARF2.0 program, the correlation equations that can predict n-octanol/water partition coefficient （lgKow） were developed using the structural and thermodynamic parameters of 28 alkyl（1-phenylsulfonyl） cycloalkane-carboxylates with experimental data of lgKow as theoretical descriptors; the correlation coefficient （R^2） was 0.9452 and the cross-validation squared correlation coefficient （Rcv^2） 0.9312. Furthermore, a four-variable model from MEDV was obtained, of which R2 = 0.9497 and Rov^2 =0.9388. The models were validated by variance inflation factor （VIF） and t-test. Cross-validation indicates that the correlation and predicting ability of the model based on both DFT method and MEDV are more advantageous than those obtained from semi-empirical AM1 method.

Studies of n-Octanol/water Partition Coefficients (lgK_(ow)) for Organophosphate Compounds by Density Functional Theory

Optimized calculation of 35 dialkyl phenyl phosphate compounds （OPs） was carded out at the B3LYP/6-31G^＊ level in Gaussian 98 program. Based on the theoretical linear solvation energy relationship （TLSER） model, the obtained parameters were taken as theoretical descriptors to establish the novel QSPR model for predicting n-octanol/water partition coefficients （lgKow） of OPs. The new model achieved in this work contains three variables, i.e., molecular volume （Vm）, dipole moment of the molecules （μ） and enthalpy （H^0）. For this model, R^2 = 0.9167 and SD = 0.31 at large t values. In addition, the variation inflation factors （VIF） of variables are all close to 1.0, suggesting high accuracy of the predicting model. And the results of cross-validation test （q^2 = 0.8993） and method validation also showed the model of this study exhibited optimum stability and better predictive power than that from semi-empirical method. The model achieved can be used to predict IgKow of congeneric compounds.

The influence of fractionation of REE-enriched minerals on the zircon partition coefficients

Zircon is widely used to simulate melt generation,migration and evolution within the crust and mantle.The achievable performance of melt modelling generally depends on the availability of reliable trace element partition coefficients(D).However,a large range of D_(REE) values for zircon from natural samples and experimental studies has been reported,with values spanning up to 3 orders of magnitude.Unfortunately,a gap of knowledge on this variability is evident.In this study we model the crystallization processes of common REE-bearing minerals from granitic melts and show that the measured zircon D_(REE) would be elevated if there is crystallization of REE-enriched minerals subsequent to zircon.Nevertheless,compared to zircon D_(REE) values measured from experimental studies,this mechanism appears to have a less significant influence on those from natural granite samples since the quantity of crystallized REE-enriched minerals is very low in natural magmatic systems and/or most of them crystallize prior to zircon.Combined with recently published studies,this work supports that analysis of natural zircon/host groundmass pairs provides more robust D_(REE) values applicable to natural systems than those measured from experimental studies,which can be used to constrain the provenance of detrital zircons.

Coprecipitation of metal ions into calcite: an estimation of partition coefficients based on field investigation

Trace elements(and their isotopes)in carbonates are commonly used to reconstruct paleoenvironment and paleoclimate.Understanding the processes and mechanisms of element incorporation into carbonates is thus crucial for using such geochemical parameters as paleoclimate proxies.In contrast to laboratory-based experimental results,the partitioning of trace metals between solid and solution phases in natural carbonate precipitation systems has rarely been reported.In this study,we investigated the partition coefficients of metal ions between solid and solution in the channel of the natural Baishuitai travertine system,Yunnan,China.Our results show that the partition coefficients of Li+,Na+,Mg2+,Sr2+and Ba2+are<1,that of Ni2+is approximately 1,and those of Co2+,Mn2+,Zn2+and Cu2+are>1,consistent with the results found in previous experimental studies.Although the substitution for Ca2+is likely the main uptake process of these metals into calcite,depending on their ionic radius and charge,trace elements may also be incorporated by adsorption or physical entrapment.Our study shows that unlike laboratory experiments performed under specific conditions,the partitioning of metals between two phases in the natural travertine system could be controlled by several,even multiple,environmental factors(e.g.,carbonate deposition rate,temperature,and pH),which should be taken into account when using trace metals(and their isotopes)in carbonate archives as a paleoclimate proxy.

QSPR Study on Octanol/water Partition Coefficient (lgK_(ow)) of Substituted Naphthalin Compounds

Structural parameters of 24 substituted naphthalin compounds were computed at four levels using Hartree-Fock and DFT methods. Based on the experimental data of octanol/water partition coefficient （lgKow）, three-parameter （energy of the highest occupied molecular orbital （EHOMO）, the most positive, atomic net charges of molecule （q^＋） and molecular average polarizability （α）） dependent equations were developed using structural parameters as theoretical descriptors. Especially, lgKow dependent equation calculated at the HF/6-311G^＊＊ level is more advantageous than others in view of their correlation and predictive abilities. This dependent equation was validated by variance inflation factors （VIF） and t-test methods and used to predict lgKow of eight designed compounds. Upon comparison, the predictive abilities of our work are all more advantageous than those calculated from molecular property calculator program.

Calculation and application of partition coefficients of light hydrocarbons in oil-based mud system

To find out the relationship between the oil-based mud,the formation fluid and the extracted gas,we use a thermodynamic approach based on static headspace gas chromatography technique to calculate the partition coefficients of 47 kinds of light hydrocarbons compounds between nC5 and nC8 in two kinds of oil-based mud-air systems,and reconstruct the original formation fluid composition under thermodynamic equilibrium.The oil-based drilling mud has little effect on the formation fluid compositions in the range of nC5-nC8(less than 1%for low-toxicity oil-based mud and less than 10%for oil-based mud).For most light hydrocarbon compositions,the partition coefficients obtained by vapor phase calibration and the direct quantitative methods have errors of less than 10%,and the partition coefficients obtained by direct quantitative method are more accurate.The reconstructed compositions of the two kinds of crude oil have match degrees of 91%and 89%with their real compositions,proving the feasibility and accuracy of reconstructing the composition of original formation fluid by using partition coefficients of light hydrocarbon compositions between nC5 and nC8.

Determination and Correlation of 1-Octanol/Water Partition Coefficients for Six Quinolones from 293.15 K to 323.15 K

A shake-flask method was used to determine 1-octanol/water partition coefficients of ofloxacin, norfloxacin, lomefloxacin, ciprofloxacin, pefloxacin and pipemidic acid from 293.15 K to 323.15 K. The results show that 1-octanol/water partition coefficient of each quinolone increased with the increase of temperature. Based on the fluid phase equilibrium theory, the thermodynamic relationship of 1-octanol/water partition coefficient depending on the temperature was proposed, and the changes of enthalpy, entropy, and Gibbs free energy for quinolones partitioning in 1-octanol/water were determined, respectively. Quinolones molecules partitioning in 1-octanol/water was mainly an entropy driving process, during which the order degree of system decreased. The temperature effects of 1-octanol/water partition coefficient were investigated. The results show that its magnitude is the same as the values in the literature.

QSPR Studies on the Octanol/water Partition Coefficient (lgK_(ow)) of Substituted Anilines with 2D and 3D Methods

Octanol/water partition coefficient （Kow） is a crucial property for evaluating the environmental behavior and fate of organic compound. Herein, some quantitative structure-property relationship （QSPR） studies were performed to estimate and predict the lgK ow of substituted anilines. 2D method （multiple linear regression, MLR） and 3D method （comparative molecular field analysis, CoMFA） were applied in this study. Successful 2D and 3D models yielded the correlation coefficient （R2） values of 0.981 and 0.966 and the Leave-One-Out （LOO） cross-validated correlation coefficient （q2） values of 0.933 and 0.820, respectively. The developed models have a highly predictive ability in both internal and external validation. In addition, the results were interpreted in terms of physical and chemical meanings of descriptors and field contribution maps. It showed that the steric and electrostatic properties are the primary factors that govern the lgK ow of substituted anilines. The information obtained from the QSPR models would be helpful to the interpretation of structural features pertinent to the lgK ow of substituted anilines, which may be helpful in estimating the organic compounds＇ potential harm to the environment.

Enhanced flushing of polychlorinated biphenyls contaminated sands using surfactant foam: Effect of partition coefficient and sweep efficiency

Foam flushing is an in situ soil remediation technology based on the traditional surfactant flushing method. The contribution of mobility control to contaminant removal by foam is helpful for improving this technology. Foam flushing of polychlorinated biphenyl （PCB）- contaminated unconsolidated media was performed to evaluate the effect of the partition coefficient （PC） and sweep efficiency （SE） on PCB removal. Column flushing with surfactant solution and foam with different types and concentrations of surfactant was carried out for PCB removal. Two types of quartz sand were investigated to evaluate the Jamin effect on the SE value of the washing agent. The results demonstrate that a small PC value and large SE value are necessary to achieve high PCB removal for foam flushing. Compared with solution flushing, the introduction of foam can effectively control the mobility of the washing agent. Similar to solution flushing, solubilization is a key factor which dominates the removal of PCBs in foam flushing, In addition, the SE value and PCB removal by foam flushing is less affected by particle size. Therefore, foam flushing was proved to be more effective in porous media with low hydraulic conductivity and high porosity. An integrated flushing with water, surfactant solution and foam was performed and the results prove that this technology successfully combines the advantages of solution solubilization and mobility control by foam, and thus further increases the remediation efficiency of PCBs to 94.7% for coarse sand.

Solid-solution partitioning of arsenic(As) in the paddy soil profiles in Chengdu Plain,Southwest China

To predict the long-term behavior of arsenic （As） in soil profiles, the solid-solution partitioning of As was studied in four paddy soil profiles obtained from agricultural areas in Chengdu Plain, Southwest China. Paddy soil profile samples were collected and soil solution samples were extracted. Total As contents in soil solution and soil solid were analyzed, along with the soil solid phase properties. The As in soil solu- tion was significantly higher in the upper layer （0--20 cm） and had a definite tendency to decrease towards 40 cm regardless of the sampling locations. When the concentration of arsenic in soil solution decreased, its content in solid phase increased. Field-based partition coefficient （Kd） for As was determined by calculating the ratio of the amount of As in the soil solid phase to the As concentration in the soil solution. Kj values varied widely in vertical samples and correlated well with soil pH, total organic carbon （TOC） and total As. The results of this study would be useful for evaluating the accumulation trends of hrsenic in soil profiles and in improving the management of the agricultural soils.

Partition Equilibrium on the Interface Between a Charged Membrane and a Mixed Electrolyte Aqueous Solution

Ionic partition equilibrium on a charged membrane immersed in a mixed electrolyte solution was systematically investigated and several models were established for the determination of partition coefficients. On the basis of theoretical models, the effects of the concentration ratio λ of the fixed group(charged density) to reference electrolyte, the concentration ratio η between the two electrolytes existing in the solution and the valence of the electrolyte ions on the partition equilibrium in a positively charged membrane were analyzed and simulated within the chosen parameters in detail. The obtainable results can also be applicable to a sytem of mixed electrolytes contacting with a negatively charged membrane. The theoretical calculations were confirmed with the experimental data of model mixed electrolytes, NaCl+HCl and CaCl 2+NaCl partitioned in the system of self made negatively charged membrane sulphonated poly(phenylene oxide)(SPPO) with different charge densities.

Estimation of n-Octanol/water Partition Coeffi-cients(lgK_(ow)) and the Aqueous Solubility(-lg_(Sw)) of all PCDF Congeners by Density Functional Theory

Optimized calculation of dibenzofuran （DF） and 135 polychlorinated dibenzofurans （PCDFs） was carried out at the B3LYP/6-31G＊ level in GAUSSIAN 98 program. Based on the theoretical linear solvation energy relationship （TLSER） model, the obtained structural parameters were taken as theoretical descriptors to establish the novel quantitative structureproperty relationship （QSPR） model for predicting n-octanol/water partition coefficients （lgKow） of PCDFs. The new model of lgKow achieved in this work contains three variables： energy of the highest occupied molecular orbital （EHOMO）, the most negative atomic partial charge （q^-） and average molecular polarizability （a）, of which R^2= 0.9011 and SD = 0,17 with larger t values. In addition, the variation inflation factors （VIF） of variables in the present model are all less than 5.5, suggesting high accuracy of the lgKow model. And the results of cross-validation test （q^2 = 0.8688） and method validation also show this model exhibits optimum stability and better predictive power than semi-empirical method. At the same time, it is found that the aqueous solubility （-lgSw） has high relative correlation with constant volume molar heat capacity （Cv^0）, of which R^2 = 0.9777 and SD = 0.22. Moreover, lgKow and -lgSw values of all PCDF congeners were predicted respectively.

Prediction of Dermal Permeability Coefficient of Nevirapine—Effect of Cosolvents, Anionic, Nonionic and Cationic Surfactants

Transdermal drug delivery not only has contributed immensely to medical practice, but has enjoyed enormous interest in the field of cosmetic and pharmaceutical industries. Nevirapine, a non‐nucleoside reverse transcriptase inhibitor (NNRTI) is used clinically for the treatment of HIV‐ 1 infection. The aim of the present study is to investigate the influence of cosolvents (glycerol, propylene glycol, ethanol, polyethylene glycol 400) and surfactants (polysorbate 20, polysorbate 80, sodium lauryl sulfate, sodium cholate and cetrimide) on the dermal permeability coefficient of nevirapine by utilizing established and recognized mathematical model that employs partition coefficient as one of its molecular descriptors. The partition coefficient of nevirapine is determined in chloroform-water system at room temperature using the shake flask method. The results show that all the cosolvents used in this study decrease the partition coefficient of nevirapine. The same decrease in the partition coefficient of nevirapine is observed with all the surfactants investigated. The order of dermal enhancement potential of the vehicles studied based on the predicted permeability coefficient is glycerol > propylene glycol > ethanol > polyethylene glycol 400 for the cosolvents while tween 20 > tween 80 > sodium lauryl sulfate > sodium cholate > cetrimide for the surfactants. The maximum predicted flux through skin was obtained by multiplying the predicted permeability coefficient and the drug aqueous solubility. As the rate of penetration into the skin is quantitatively assessed by the use of permeability coefficient, the findings suggest that for dermal formulation of nevirapine, glycerol and tween 20 are the most preferred vehicles out of the vehicles investigated. Furthermore, the results of the correlation coefficients obtained by plotting permeability coefficient or maximum predicted flux, versus logarithm partition coefficient indicate that permeability coefficient can be a more reliable parameter to predict transdermal absorption of nevirapine than flux.

Binding characteristics of perylene, phenanthrene and anthracene to different DOM fractions from lake water

Six hydrophobic and hydrophilic fractions were isolated using XAD-8 and XAD-4 resins, and were extensively characterized. Partition coefficients of perylene, pbenanthrene and anthracene binding to the six fractions were determined by fluorescence quenching titration. The Kdo~ values obtained for the polycyclic aromatic hydrocarbons （PAHs） binding to the hydrophobic fractions were larger than those to the hydrophilic fractions. Nonlinear Stem-Volmer plots were observed when binding phenanthrene and anthracene to some hydrophilic fraction samples, suggesting saturation of polar interaction binding sites. A significant correlation of logKdo~ values with molecular weights and molar absorptivities at 280 nm was observed, while atomic ratio of C/t-I was found to be a poor indicator for aromaticity. Other structural descriptors such as paraffinic carbon and polarity influenced the DOM-fraction ability to bind PAHs. Different interaction mechanisms underlying binding of the different fractions to the PAHs were also discussed.

Empirical model for estimating vertical concentration profiles of re-suspended, sediment-associated contaminants

Vertical distribution processes of sediment contaminants in water were studied by flume experiments. Experimental results show that settling velocity of sediment particles and turbulence characteristics are the major hydrodynamic factors impacting distribution of pollutants, especially near the bottom where particle diameter is similar in size to vortex structure. Sediment distribution was uniform along the distance, while contaminant distribution slightly lagged behind the sediment. The smaller the initial sediment concentration was, the more time it took to achieve a uniform concentration distribution for suspended sediment. A contaminants transportation equation was established depending on mass conservation equations. Two mathematical estimation models of pollutant distribution in the overlying water considering adsorption and desorption were devised based on vertical distribution of suspended sediment: equilibrium partition model and dynamic micro-diffusion model. The ratio of time scale between the sediment movement and sorption can be used as the index of the models. When this ratio was large, the equilibrium assumption was reasonable, but when it was small, it might require dynamic micro-diffusion model.

QSPR Studies on lgK_(ow) and lgK_(oc) of Fluorobenzenes and Property Parameters Based on HF and DFT Calculations

Quantum chemistry parameters of 22 fluorobenzenes were computed at six levels using Hartree-Fock and DFT methods. Based on the experimental data of n-octanol/water partition coefficient （lgKow）, a three-parameter （dipole moments （μ）, zero point energy （ZPE） and free energy （G°）） quantitative correlation equation that can predict IgKow was developed using structural and thermodynamic parameters as theoretical descriptors. Similarly, based on experimental data of soil organic carbon sorption coefficient （lgKoc）, the other three-parameter （the most negative atomic net charge of molecule （q^-）, dipole moments （μ） and molecular volume （Vi）） quantitative correlation equation that can predict lgKoc was given. Quantitative correlation equations based on B3LYP/6- 311 G^＊＊ calculation were validated by VIF （variance inflation factors） and t-test and used to predict IgKow and lgKoc of a series of compounds. The result showed that the correlation and prediction ability of lgKoc equations based on three levels of HF/STO-3G, B3LYP/6-31 G^＊ and B3LYP/6- 311G^＊＊ are all more advantageous than those based on AMI.