Under spinning conditions, lubricant on islandic spot patterned M2 steel disc experiences centrifugal and tangential force components. Depending upon the relative position of the spots and the flow of lubricant, accum...Under spinning conditions, lubricant on islandic spot patterned M2 steel disc experiences centrifugal and tangential force components. Depending upon the relative position of the spots and the flow of lubricant, accumulation of lubricant in front of patterned islandic spots creates thrusting to mating part and subsequently reduces contact between the mating couple. Whilst wear debris is likely to be spun off the plateau of the spots to their neighbouring valleys so as to reduce wear. Hence, it gives favorable tribological characteristics. Aiming at verifying such mechanisms, studies were performed on M2 steel disc specimens slid with ASSAB 17 tool steel pin. The M2 steel disc specimens were respectively (i) machined with non-patterned (NP), (ii) etched to produce in-lined (INE) islandic patterns, and (iii) etched to produce staggered (STE) islandic spot patterns. Results indicated that the INE patterned discs gave most favorable wear characteristics, the NP of the worse characteristics whilst the STE ranged in the middle. However, the actual contact mechanism leads to the descending sequence of favorable friction behaviors nominally as: NP, INE and STE.展开更多
ObjectiveTo investigate the gene expression changes in normal and degeneration lumbar intervertebral disc in humans, providing information for clinical. MethodsThe PCR products of 4096 human genes were spotted onto a ...ObjectiveTo investigate the gene expression changes in normal and degeneration lumbar intervertebral disc in humans, providing information for clinical. MethodsThe PCR products of 4096 human genes were spotted onto a kind of chemical-material-coated-glass slides. The total RNAs were isolated from the tissues. Both the mRNAs from the degeneration and normal lumbar intervertebral disc in humans were reversely transcribed to the cDNAs, which used as the hybridization probes with the incorporations of fluorescent dUTP. The mixed probes were then hybridized to the cDNA microarray. After high-stringent washing, the cDNA microarray was scanned for the fluorescent signals and analyzed with computer image analysis. ResultsAmong the 4096 targets, there were 706 genes whose expression levels differed between the degeneration and normal lumbar intervertebral disc in all cases, comprising 298 up-regulated and 358 down-regulated ones. ConclusionDNA microarray technology is an effective technique in screening for differently expressed genes between the degeneration and normal lumbar intervertebral disc. Cell apoptosis plays an important role in the process of lumbar intervertebral disc degeneration.展开更多
Disc-electrospinning using a disc as spinneret and a rotary drum as collector is a novel technology to prepare nanofiber which has been applied in tissue engineering scaffolds. In this study, nanofibrous mats with mlc...Disc-electrospinning using a disc as spinneret and a rotary drum as collector is a novel technology to prepare nanofiber which has been applied in tissue engineering scaffolds. In this study, nanofibrous mats with mlcro-patterned structure were fabricated via disc-electrospinning. Poly (ε-eaprolactone) (PCL) was dissolved in trifluoroethanol (TFE) at various concentrations ( 2 %-7 % ) (w/v) for electrospinning and the applied voltage ranged from 40 to 70 kV. Scanning electron microscopy (SEM) was employed to observe the morphology of the nanofibrous scaffolds. SEM images illustrated that the nanofibers with beads formed micro-patterned structure such as triangles and other polygons. The average diameter of nanofibers presented various size with the concentration increased from 2% to 7%. The beads on the nanofibers constructed the vertexes of the polygons, while nanofibers bridged between adjacent vertexes. The concentration of solution and applied voltage may be two dominant factors to influence the topological structure of the nanofibrons scaffolds. Cells cultured on the micro-patterned scaffold spread along the edges of the polygons. The scaffold with patterned structure may have a promising application in tissue engineering.展开更多
To reveal stress distribution and crack propagation of Brazilian discs under impact loads, dynamic tests were conducted with SHPB (split Hopkinson pressure bar) device. Stress states of specimens were monitored with s...To reveal stress distribution and crack propagation of Brazilian discs under impact loads, dynamic tests were conducted with SHPB (split Hopkinson pressure bar) device. Stress states of specimens were monitored with strain gauges on specimen surface and SHPB bars. The failure process of specimen was recorded by ultra speed camera FASTCAM SA1.1 (675 000 fps). Stress histories from strain gauges offer comprehensive information to evaluate the stress equilibrium of specimen in time and space. When a slowly rising load (with loading rates less than 1 200 N/s for d 50 mm bar) is applied, there is usually good stress equilibrium in specimen. The stress distribution after equilibrium is similar to its static counterpart. And the first crack initiates at the disc center and propagates along the load direction. But with the front of incident wave becoming steep, it is hard for specimens to get to stress equilibrium. The first crack may appear anywhere on the specimen together with multiple randomly distributed secondary cracks. For a valid dynamic Brazil test with stress equilibrium, the specimen will break into two halves neatly. While for tests with stress disequilibrium, missing strap may be found when broken halves of specimens are put together. For those specimens broken up neatly at center but having missing wedges at the loading areas, it is usually subjected to local buckling from SHPB bars.展开更多
基金the National Natural Science Foundation of China(No. 50575173).
文摘Under spinning conditions, lubricant on islandic spot patterned M2 steel disc experiences centrifugal and tangential force components. Depending upon the relative position of the spots and the flow of lubricant, accumulation of lubricant in front of patterned islandic spots creates thrusting to mating part and subsequently reduces contact between the mating couple. Whilst wear debris is likely to be spun off the plateau of the spots to their neighbouring valleys so as to reduce wear. Hence, it gives favorable tribological characteristics. Aiming at verifying such mechanisms, studies were performed on M2 steel disc specimens slid with ASSAB 17 tool steel pin. The M2 steel disc specimens were respectively (i) machined with non-patterned (NP), (ii) etched to produce in-lined (INE) islandic patterns, and (iii) etched to produce staggered (STE) islandic spot patterns. Results indicated that the INE patterned discs gave most favorable wear characteristics, the NP of the worse characteristics whilst the STE ranged in the middle. However, the actual contact mechanism leads to the descending sequence of favorable friction behaviors nominally as: NP, INE and STE.
文摘ObjectiveTo investigate the gene expression changes in normal and degeneration lumbar intervertebral disc in humans, providing information for clinical. MethodsThe PCR products of 4096 human genes were spotted onto a kind of chemical-material-coated-glass slides. The total RNAs were isolated from the tissues. Both the mRNAs from the degeneration and normal lumbar intervertebral disc in humans were reversely transcribed to the cDNAs, which used as the hybridization probes with the incorporations of fluorescent dUTP. The mixed probes were then hybridized to the cDNA microarray. After high-stringent washing, the cDNA microarray was scanned for the fluorescent signals and analyzed with computer image analysis. ResultsAmong the 4096 targets, there were 706 genes whose expression levels differed between the degeneration and normal lumbar intervertebral disc in all cases, comprising 298 up-regulated and 358 down-regulated ones. ConclusionDNA microarray technology is an effective technique in screening for differently expressed genes between the degeneration and normal lumbar intervertebral disc. Cell apoptosis plays an important role in the process of lumbar intervertebral disc degeneration.
基金National Natural Science Foundations of China,Science and Technology Comission of Shanghai Municipality,China,Ph.D.Programs Foundation of Ministry of Education of China
文摘Disc-electrospinning using a disc as spinneret and a rotary drum as collector is a novel technology to prepare nanofiber which has been applied in tissue engineering scaffolds. In this study, nanofibrous mats with mlcro-patterned structure were fabricated via disc-electrospinning. Poly (ε-eaprolactone) (PCL) was dissolved in trifluoroethanol (TFE) at various concentrations ( 2 %-7 % ) (w/v) for electrospinning and the applied voltage ranged from 40 to 70 kV. Scanning electron microscopy (SEM) was employed to observe the morphology of the nanofibrous scaffolds. SEM images illustrated that the nanofibers with beads formed micro-patterned structure such as triangles and other polygons. The average diameter of nanofibers presented various size with the concentration increased from 2% to 7%. The beads on the nanofibers constructed the vertexes of the polygons, while nanofibers bridged between adjacent vertexes. The concentration of solution and applied voltage may be two dominant factors to influence the topological structure of the nanofibrons scaffolds. Cells cultured on the micro-patterned scaffold spread along the edges of the polygons. The scaffold with patterned structure may have a promising application in tissue engineering.
基金Projects(50904079, 51274254, 50934006) supported by the National Natural Science Foundation of ChinaProject(2010CB732004) supported by the National Basic Research Program of ChinaProject(NCET-11-0528) supported by Program for New Century Excellent Talents in University of China
文摘To reveal stress distribution and crack propagation of Brazilian discs under impact loads, dynamic tests were conducted with SHPB (split Hopkinson pressure bar) device. Stress states of specimens were monitored with strain gauges on specimen surface and SHPB bars. The failure process of specimen was recorded by ultra speed camera FASTCAM SA1.1 (675 000 fps). Stress histories from strain gauges offer comprehensive information to evaluate the stress equilibrium of specimen in time and space. When a slowly rising load (with loading rates less than 1 200 N/s for d 50 mm bar) is applied, there is usually good stress equilibrium in specimen. The stress distribution after equilibrium is similar to its static counterpart. And the first crack initiates at the disc center and propagates along the load direction. But with the front of incident wave becoming steep, it is hard for specimens to get to stress equilibrium. The first crack may appear anywhere on the specimen together with multiple randomly distributed secondary cracks. For a valid dynamic Brazil test with stress equilibrium, the specimen will break into two halves neatly. While for tests with stress disequilibrium, missing strap may be found when broken halves of specimens are put together. For those specimens broken up neatly at center but having missing wedges at the loading areas, it is usually subjected to local buckling from SHPB bars.