The plan view pattern control theoretical models were simplified. Under the condition of constant volume for the plan view pattern compensation, the relation between the thickness and the length can be simplified to t...The plan view pattern control theoretical models were simplified. Under the condition of constant volume for the plan view pattern compensation, the relation between the thickness and the length can be simplified to the linearity in the segment for the plan view pattern control function. The compensation volume can be dispersed for easy calculation. By comparing the model calculation result with the actual result, it was concluded that the simplified model can be used for the online control process.展开更多
Research works on width compensation and correction were carried out in order to eliminate the effects of the PVPC （ plan view pattern control） on width accuracy of plate mill. The thickness correction calculation f...Research works on width compensation and correction were carried out in order to eliminate the effects of the PVPC （ plan view pattern control） on width accuracy of plate mill. The thickness correction calculation formula was derived for compensation the width deviation caused by PVPC function, and the formula is unified under the thinning and thickening conditions. In order to improve the width calculation accuracy, width spread calculation process was modified with dividing one large reduction pass to several small reduction calculation steps. The thickness wedge was simplified to rectangle based on the volume constant principle, and the width spread model for PVPC was constructed. The width compensation and correction for the PVPC functions are used for the online control process, and the Product dimension accuracy is improved. With the decrease of Crop losses, the Droduct yield was increased with 0. 2%.展开更多
The forward slip model with adhesion was used to derive the formula of calculating taper rolling time. The relation between the rolling time and the taper length and the relation between the rolling time and the taper...The forward slip model with adhesion was used to derive the formula of calculating taper rolling time. The relation between the rolling time and the taper length and the relation between the rolling time and the taper thickness can be obtained. The numerical solution for this formula was used on site. According to the simulation result, the roll gap value should be changed linearly with rolling time.展开更多
An automatic three-dimensional(3D) reconstruction method based on four-view stereo vision using checkerboard pattern is presented. Mismatches easily exist in traditional binocular stereo matching due to the repeatable...An automatic three-dimensional(3D) reconstruction method based on four-view stereo vision using checkerboard pattern is presented. Mismatches easily exist in traditional binocular stereo matching due to the repeatable or similar features of binocular images. In order to reduce the probability of mismatching and improve the measure precision, a four-camera measurement system which can add extra matching constraints and offer multiple measurements is applied in this work. Moreover, a series of different checkerboard patterns are projected onto the object to obtain dense feature points and remove mismatched points. Finally, the 3D model is generated by performing Delaunay triangulation and texture mapping on the point cloud obtained by four-view matching. This method was tested on the 3D reconstruction of a terracotta soldier sculpture and the Buddhas in the Mogao Grottoes. Their point clouds without mismatched points were obtained and less processing time was consumed in most cases relative to binocular matching. These good reconstructed models show the effectiveness of the method.展开更多
For any software company that frequently performs quality assurance activities devoted to measurement, evaluation (ME) and change/improvement (MEC) projects, ME and MEC strategies can be valuable organizational assets...For any software company that frequently performs quality assurance activities devoted to measurement, evaluation (ME) and change/improvement (MEC) projects, ME and MEC strategies can be valuable organizational assets. In this paper, we analyze the improvement of a ME strategy, which can be considered an organizational resource to be applied to quality assurance activities. This resource is called the GOCAME (Goal-Oriented Context-Aware Measurement and Evaluation) strategy. AME/MEC strategy embraces the next three integrated capabilities: 1) the ME/MEC domain conceptual base and framework;2) the process perspective specifications;and, 3) the method specifications. The improvement of GOCAME was performed instantiating two strategy patterns. A strategy pattern is a reusable solution to recurrent problems in ME/MEC projects. For an improvement goal, the selected MEC strategy pattern allows instantiating in a project a set of tailored activities and methods for measurement, evaluation, analysis and change. Particularly, we instantiate the GoME_1QV (Goal-oriented Measurement and Evaluation for One Quality View) strategy pattern to understand the GOCAME current quality state and compare it with the so-called GQM+ Strategies. First, this evaluation and analysis allows us to know the GOCAME strengths and weaknesses with regard to the quality of the three capabilities. Second, we instantiate the GoMEC_1QV (Goal-oriented Measurement, Evaluation and Change for One Quality View) strategy pattern to improve the GOCAME current state, producing as result a new version of the GOCAME strategy.展开更多
基金Item Sponsored by National Economy Trade Committee Foundation(ZZ0113A040201)
文摘The plan view pattern control theoretical models were simplified. Under the condition of constant volume for the plan view pattern compensation, the relation between the thickness and the length can be simplified to the linearity in the segment for the plan view pattern control function. The compensation volume can be dispersed for easy calculation. By comparing the model calculation result with the actual result, it was concluded that the simplified model can be used for the online control process.
基金Sponsored by the Fundamental Research Funds for the Central Universities(Grant No.N120407007)
文摘Research works on width compensation and correction were carried out in order to eliminate the effects of the PVPC （ plan view pattern control） on width accuracy of plate mill. The thickness correction calculation formula was derived for compensation the width deviation caused by PVPC function, and the formula is unified under the thinning and thickening conditions. In order to improve the width calculation accuracy, width spread calculation process was modified with dividing one large reduction pass to several small reduction calculation steps. The thickness wedge was simplified to rectangle based on the volume constant principle, and the width spread model for PVPC was constructed. The width compensation and correction for the PVPC functions are used for the online control process, and the Product dimension accuracy is improved. With the decrease of Crop losses, the Droduct yield was increased with 0. 2%.
基金Item Sponsored by National Economy Trade Committee Foundation (ZZ0113A040201)
文摘The forward slip model with adhesion was used to derive the formula of calculating taper rolling time. The relation between the rolling time and the taper length and the relation between the rolling time and the taper thickness can be obtained. The numerical solution for this formula was used on site. According to the simulation result, the roll gap value should be changed linearly with rolling time.
基金Project(2012CB725301)supported by the National Basic Research Program of ChinaProject(201412015)supported by the National Special Fund for Surveying and Mapping Geographic Information Scientific Research in the Public Welfare of ChinaProject(212000168)supported by the Basic Survey-Mapping Program of National Administration of Surveying,Mapping and Geoinformation of China
文摘An automatic three-dimensional(3D) reconstruction method based on four-view stereo vision using checkerboard pattern is presented. Mismatches easily exist in traditional binocular stereo matching due to the repeatable or similar features of binocular images. In order to reduce the probability of mismatching and improve the measure precision, a four-camera measurement system which can add extra matching constraints and offer multiple measurements is applied in this work. Moreover, a series of different checkerboard patterns are projected onto the object to obtain dense feature points and remove mismatched points. Finally, the 3D model is generated by performing Delaunay triangulation and texture mapping on the point cloud obtained by four-view matching. This method was tested on the 3D reconstruction of a terracotta soldier sculpture and the Buddhas in the Mogao Grottoes. Their point clouds without mismatched points were obtained and less processing time was consumed in most cases relative to binocular matching. These good reconstructed models show the effectiveness of the method.
文摘For any software company that frequently performs quality assurance activities devoted to measurement, evaluation (ME) and change/improvement (MEC) projects, ME and MEC strategies can be valuable organizational assets. In this paper, we analyze the improvement of a ME strategy, which can be considered an organizational resource to be applied to quality assurance activities. This resource is called the GOCAME (Goal-Oriented Context-Aware Measurement and Evaluation) strategy. AME/MEC strategy embraces the next three integrated capabilities: 1) the ME/MEC domain conceptual base and framework;2) the process perspective specifications;and, 3) the method specifications. The improvement of GOCAME was performed instantiating two strategy patterns. A strategy pattern is a reusable solution to recurrent problems in ME/MEC projects. For an improvement goal, the selected MEC strategy pattern allows instantiating in a project a set of tailored activities and methods for measurement, evaluation, analysis and change. Particularly, we instantiate the GoME_1QV (Goal-oriented Measurement and Evaluation for One Quality View) strategy pattern to understand the GOCAME current quality state and compare it with the so-called GQM+ Strategies. First, this evaluation and analysis allows us to know the GOCAME strengths and weaknesses with regard to the quality of the three capabilities. Second, we instantiate the GoMEC_1QV (Goal-oriented Measurement, Evaluation and Change for One Quality View) strategy pattern to improve the GOCAME current state, producing as result a new version of the GOCAME strategy.
