Thermal Properties Reconstruction and Temperature Fields in Asphalt Pavements: Inverse Problem and Optimisation Algorithms

A two-layer implicit difference scheme is employed in the present study to determine the temperature distribution in an asphalt pavement.The calculation of each layer only needs four iterations to achieve convergence.Furthermore,in order to improve the calculation accuracy a swarm intelligence optimization algorithm is also exploited to inversely analyze the laws by which the thermal physical parameters of the asphalt pavement materials change with temperature.Using the basic cuckoo and the gray wolf algorithms,an adaptive hybrid optimization algorithm is obtained and used to determine the relationship between the thermal diffusivity of two types of asphalt pavement materials and the temperature.As shown by the results,the prediction accuracy achievable with this approach is higher than that of the linear model.

Correlation analysis of longitudinal cracks and vertical deformation within asphalt pavement of cold regions

The asphalt pavement longitudinal crack is a common distress in cold regions,resulting from uneven deformation of the subgrade.Analysis of the correlation law between uneven deformation and crack distress is of positive significance for understanding the mechanism of crack initiation,and putting forward treatment measures.In view of the complexity of longitudinal crack inducement and road surface deformation,the grey relational method was used to analyze this relationship.Through long-term monitoring of the vertical deformation data of typical road sections,the vertical deformation law of the pavement surface and its deformation characteristics under the action of temperature field are analyzed.Parameters such as vertical relative deformation,vertical relative deformation rate and vertical differential deformation VDSr were constructed to describe vertical deformation characteristics.Typical distribution characteristics of longitudinal fractures and their length and distribution characteristics are also described.The grey correlation analysis theory was utilized to analyze the relationship between deformation characteristics of sections,cross sections and monitoring points and longitudinal crack characteristics(length and location).The analysis reveals a linear positive correlation or a high correlation between several indicators.This study can provide a deeper understanding of the occurrence and development mechanism of longitudinal cracks in asphalt pavement of cold areas,and give references for the research of road engineering structure,materials and distress prevention.

Estimation and Analysis of Structural Responses of Asphalt Pavement Using Interlayer Contact Bonding Model

The interlayer contact condition of asphalt pavement has a significant impact on stress transfer and energy dissipation with adjacent layers,so a model considering the bonding condition of adjacent layers is introduced for evaluating the structural response of asphalt pavement.The pavement structure,the material characterization with temperature,the interlayer contact bonding model,the types of bond failure,and the prediction method of pavement life are described in detail.Results show that the transversely tensile strains at the top of asphalt pavement under the condition of high temperature were easy to cause the top-down cracking outside the edge of the dual tire.The bonding failure has a significant influence on strains at the bottom of the surface course with the condition of high temperature,especially,the longitudinally tensile strains would increase obviously as the disengaging area between the surface course of asphalt pavement and the base layer increases.Finally,it is proved that the surface course is vulnerable to form deformations and cause damage under the combined action of low speed and high temperature.

Analysis on On-Site Asphalt Pavement Quality Inspection Technology in Highway Engineering

The acceleration of urbanization has promoted the increase in the number of urban highway projects,resulting in an increase of emphasis on the quality of urban highway projects.The quality and safety of highway construction directly affects the driving comfort,safety,and service life after it is put into operation.Among them,asphalt pavement is an important structure in highway construction,and it is also a key link that directly affects the construction quality.In order to ensure the quality of construction,it is necessary to strengthen on-site testing during the construction process to discover problems in time,and to ensure that the construction is up to standard.This paper mainly presents an analysis on the necessity and application of on-site quality inspection technology for asphalt pavement construction of highway engineering,and outlines measures to improve highway engineering construction testing technology.

Discussion on Test and Detection Technology of Highway Asphalt Pavement

The road traffic industry in China has been developing rapidly in recent years.Asphalt has become the main material in road construction because of its seamless connection and short construction period,and it has an important impact on the overall quality of highway construction.Therefore,it is necessary to conduct scientific and reasonable tests and detections for highway asphalt pavement.This paper presents a discussion on the test and detection technology of highway asphalt pavement for future reference.

Technologies for Asphalt Pavement Surface Testing in Road and Bridge Construction

Asphalt pavement is currently one of the main components in the construction of roads and bridges.However,from a practical point of view,various quality problems are prone to occur in the surface layer of asphalt pavement,which will lead to the poor overall quality of road and bridge projects.Therefore,it should be applied reasonably.Advanced testing technologies are used to test the mixture quality,compaction,segregation,thickness,and other aspects of the asphalt pavement surface layer,so as to improve the quality of the asphalt pavement surface layer,and then improve the overall quality of road and bridge construction.Therefore,this paper mainly analyzes the technologies for asphalt pavement surface layer testing in road and bridge engineering construction.

Analytical prediction and field validation of transient temperature field in asphalt pavements

This work presented the development and validation of an analytical method to predict the transient temperature field in the asphalt pavement.The governing equation for heat transfer was based on heat conduction radiation and convection.An innovative time-dependent function was proposed to predict the pavement surface temperature with solar radiation and air temperature using dimensional analysis in order to simplify the complex heat exchange on the pavement surface.The parameters for the time-dependent pavement surface temperature function were obtained through the regression analysis of field measurement data.Assuming that the initial pavement temperature distribution was linear and the influence of the base course materials on the temperature of the upper asphalt layers was negligible,a close-form analytical solution of the temperature in asphalt layers was derived using Green's function.Finally,two numerical examples were presented to validate the model solutions with field temperature measurements.Analysis results show that the solution accuracy is in agreement with field data and the relative errors at a shallower depth are greater than those at a deeper one.Although the model is not sensitive to dramatic changes in climatic factors near the pavement surface,it is applicable for predicting pavement temperature field in cloudless days.

Evaluation of Mixture Performance Recycled Asphalt Pavement Materials as Base Layer with or without Rejuvenator into the Asphalt

The binder properties were determined in accordance with Chinese standard such as ductility test, which allowed to measure the distance in centimeters that a standard briquette of asphalt had been stretched before breaking. Then, penetration test was carried out in order to know some properties of the asphalt, which are the hardness and the softness. Finally, softening point test was carried out in order to determine the temperature at which the bitumen attains a particular degree of softening under the specification of the test. According to Chinese standard for performance tests, firstly, Marshall test was carried out in order to measure the theoretical density, air voids, voids filled with asphalt, stability, flow, and voids in mineral aggregate of asphalt specimens. Secondly, Freeze-thaw splitting test was carried out in order to determine Splitting strength ratio. Finally, dynamic stability (rutting) test was carried out to determine average dynamic stability. Beside the tests carried out, the gradation of the extracted aggregate in accordance with American Association of State Highway and Transportation Officials was carried out to determine the dimensions of the particles weight distribution. Furthermore, both the percentage of recycled asphalt pavement materials and binder in mixture were determined to know how much of the new material during the mixture was needed. However, two specimens were used to evaluate the performance of recycled asphalt pavement materials. One specimen of recycled asphalt pavement materials was ten years old, and another one of recycled asphalt pavement materials was five years old. The results show that the conditions of the environment such as moisture, temperature, and age, decrease the ductility and penetration properties of binder when increase the softening point property of binder. Then the gradation of recycled asphalt pavement aggregate is of the required values to reuse in the mixture, while the flow ratio, the splitting strength ratio, and the dynamic stability ratio, are less than the required value test. With regard to the properties of mixture of recycled asphalt pavement material binder with rejuvenator, the results show that when the penetration and ductility versus percentage of rejuvenator increase, softening point versus percentage of rejuvenator decreases. Also, when the bitumen and rejuvenator percentage increase, the air voids decrease. Consequently, voids filled with asphalt and voids in the mineral aggregate increase. Moreover, the theoretical density and stability values decrease in a mixture containing four-point fifty percent to six percent of bitumen and rejuvenator, whereas the flow values increase. More interestingly, with four percent to four-point fifty percent mixture ratio of bitumen and rejuvenator, density, stability, and flow values increase. The splitting strength ratio values of mixtures and the dynamic stability test (rutting test) values of mixtures with forty percent of specimen one and specimen two respectively are greater than the required value of the standard test. In addition, the high percentage of rejuvenator increases the rut of pavement, in the same manner, the low percentage of rejuvenator induces low rut. In conclusion, the binder content from recycled materials without rejuvenator seems not be sufficient to be reused on the new pavement while the aged recycled material seems to be performed better than no aged recycled material with rejuvenator into bitumen. Then, the rejuvenator can influence the bitumen properties and performance of the pavement. Finally, the pavement made by only recycled pavement materials as a base layer appears to be more economical but cannot be more effective than the pavement made by mixture of new and recycled pavement materials as a base layer.

Genetic Optimization Method of Asphalt Pavement Based on Rutting and Cracking Control

Nowadays asphalt pavement structure bearing is not the main subject for pursuers to study.Comparatively,the pavement performance is more important and emphasized.Based on this,rutting and cracking analysis is introduced into pavement optimization.A optimization model based on these two considerations is also established.The genetic algorithms (GAs) is adopted to solve the model.It is an intellective method.This research provides a new idea and technique for asphalt pavement structure optimization.

Harvesting Energy from Asphalt Pavement by Piezoelectric Generator

This paper presents the way to harvest mechanical energy from asphalt pavement by piezoelectric generator. Results show that the potential energy in asphalt pavement can be up to 150 kW/h per lane per kilometre. Part of the mechanical energy can be harvested by piezoelectric transducers. The performance of seven typical transducers is examined through finite element analysis. Results show that PZT piles and multilayer, cymbal and bridge can work in asphalt pavement environment. PZT piles and multilayer have higher energy converting rate, However, the total harvested energy is small if these transducers are embedded directly in pavement. A prototype pavement generator is developed using PZT piles to increase the harvested energy. The generator can harvest more than 50 kW/h energy from the pavement under heavy traffic. 8-16 PZT piles are recommended for one generator. Round shape is suggested for the PZT piles to reduce the concentration of stress. And multilayer structure is recommended for PZT piles to decrease the electric potential of generator. The generator can be extended as sensor in the asphalt pavement, which can be used to monitor the traffic, pavement stress and temperature.

Performance of RAP in the System of Cold Inplace Recycling of Asphalt Pavement

The property of reclaimed asphalt pavement（RAP） mixture will be affected mainly by composition of old asphalt/soil and cement content in CIR system. We studied the relationship between A/S and cementitious materials. It showed that if there was no soil in RAP, the unconfined compressive strength was only from 0.18 MPa to 1.07 MPa even if adding cement was from 2% to 6%, and RAP samples collapsed during conserving in water. The optimum water content rose from 6.5% to 11% with the declining of A/S from S=0 to A/S=1/5. Five RAP samples all got the maximum compressive strength when A/S=5/5, and the maximum compressive strength of the samples adding 6% cement was 3.17 MPa. It showed that the capacity of RAP was not only affected by A/S, but also by the content of cement. The dynamic modulus of RAP will increase with the rise of loading frequency and decrease with the temperature rising. SEM test showed that C-S-H interlacing formed the netted structure, and it enwrapped the aggregate and improved the strength of RAP.

Evaluation and Selection of Sealants and Fillers Using Principal Component Analysis for Cracks in Asphalt Concrete Pavements

The objective of this paper was to develop a comprehensive evaluation method and index to evaluate the performance of sealants and fillers for cracks in asphalt concrete pavements using the method of principal component analysis. The performance experiments including cone penetration, softening point, flow, resilience and tension at low temperature respectively were conducted by reference of ASTM D5329 for eight sealants and fillers often used in China. There by a principal component model was developed and weight of every index was calculated. The experimental results show that there are significantly different performances for sealants and fillers often used in China. Principal component analysis is an objective method that evaluates and selects the performance of sealants and fillers for cracks in asphalt concrete pavements.

Modeling mechanistic responses in asphalt pavements under three-dimensional tire-pavement contact pressure

A three dimensional finite element program incorporating actually measured vertical tire-pavement contact pressure(TPCP) was utilized for modeling the mechanistic responses in asphalt concrete(AC) layers by simulating various vehicle motions:stationary and non-stationary(i.e.in acceleration or deceleration mode).Analysis of the results indicated the following items.1) It is critical to use the vertical TPCP as the design control criteria for the tensile strains at the bottom of the AC layer when the base layer modulus is lower in magnitude(e.g.≤400 MPa);however,when the base layer modulus is higher in magnitude(e.g.≥7 000 MPa),the horizontal TPCP and the tensile strains in the X-direction at the surface of the AC layer should also be considered as part of the design response criteria.2) The definition of "overload" needs to be revised to include tire pressure over-inflation,i.e.,a vehicle should be considered to be overloaded if the wheel load exceeds the specification and/or the tire inflation pressure is higher than the specification.3) Light trucks have more structural impact on the strain responses and pavement design when the thickness of the surfacing AC layer is thinner(e.g.≤50 mm).4) The acceleration of a vehicle does not significantly impact the AC surface distresses such as rutting at the top of the upgrade slopes or intersections;however,vehicle deceleration can dramatically induce horizontal shear strains and consequently,aggravate shoving and rutting problems at the highway intersections.Evidently,these factors should be taken into account during mechanistic stress-strain modeling and structural design of asphalt pavements.

Research on the Evaluation System of Epoxy Asphalt Steel Deck Pavement Distress Condition

Epoxy asphalt concrete has been one of the mainstream technology of steel deck pavement in China. But little specification about evaluation system for its distress condition has been researched and maintenance was still unsystematic. The section weight coefficient of different distress is proposed by analyzing the applicability of the “Highway Performance Assessment Standards”. Indexes mainly including SDPCI PDR and PCR are presented to evaluate its distress condition. The evaluation system and maintenance plan decision tree were recommended which can assist scientific maintenance of epoxy asphalt steel deck pavement.

Analysis of asphalt pavement structural response from an accelerated loading test

This study was to compare theoretical calculation and practical measurement structure response of asphalt pavement. Analysis of the pavement layer moduli was determined from a Back-calculation of Falling Weight Deflectometer (FWD) data and the measured stiffness moduli of asphalt layer cores. The pavement response was calculated using a theoretical model and the measured strain response at the bottom different layers. Layered elastic theory was used to back-calculate the layer moduli and three different theory models were used to forward calculate the strain and deflection. The models were: Layered Elastic Theory (LET), the Method of Equivalent Thicknesses (MET) with linear elastic and the Finite Element Method (FEM) where asphalt layer may be viscoelastic. The results showed that the calculation structure response from FEM was consistent with measured results.

A state-of-the-art review of asphalt pavement surface texture and its measurement techniques

To understand the research status of asphalt pavement texture,the related achievements and progress of pavement surface texture were systematically sorted out from three aspects:the characterization of pavement surface texture,the texture measurement and evaluation,and the relationship between texture and the skid resistance.Based on the statistical geometric characteristics,the spectral characteristics,the fractal characteristics and the multifractal characteristics,the characteristics of pavement texture were discussed.The test methods of pavement texture were divided into two categories:direct measurement methods and indirect measurement methods.The advantages and disadvantages of each measurement method were summarized.The effects of macro-texture and micro-texture on asphalt pavement were discussed,respectively.The relationship between texture and skid resistance was studied.This review shows that multifractal theory should be further studied from the aspect of road engineering.High-precision non-contact integrated detection technology should be further studied to meet the needs of complex testing environments.The method of finite element numerical simulation has potential for the analysis of pavement skid resistance.In addition,methods such as big data analysis,neural network,and deep learning should be studied to achieve the intelligent perception and management of the whole state of skid resistance prediction.

Mechanical Properties of Asphalt Pavement Structure in Highway Tunnel

A linear full 3D finite element method (FEM) was performed in order to present the key design parameters of highway tunnel asphalt pavement under double-wheel load on rectangular loaded area considering horizontal contact stress induced by the acceleration/deceleration of vehicles.The key design parameters are the maximum horizontal tensile stresses at the surface of the asphalt layer,the maximum horizontal tensile stresses at the bottom of the asphalt layer and the maximum vertical shear stresses at the surface of the as- phalt layer were calculated.The influencing factors such as double-wheel weight;asphalt layer thickness;base course stiffness modulus and thickness;and the contact conditions among the structure layers on these key design parameters were also examined separately to propose construction procedures of highway tunnel asphalt pavement.

Recent developments in asphalt-aggregate separation technology for reclaimed asphalt pavement

Reclaimed asphalt pavement(RAP)has significant recycling value because it contains nonrenewable resources including asphalt and aggregate.However,thus far,only a small part of RAP materials can be used in the con-struction of recycled asphalt pavement,and the usage is regarded as a low-value utilization in the underlying layers.One of the most important reasons for this shortcoming is the problem of false particle size and pseudo gradation of RAP materials.Therefore,identifying suitable asphalt-aggregate separation technology is essential for improving the utilization of RAP materials in recycled asphalt mixture and enhancing the construction quality of recycled asphalt pavement.To address this,the paper performed a systematic review of asphalt-aggregate separation technologies for processing RAP materials and their prospects.Firstly,based on the composition of the asphalt mixture and the characteristics of RAP materials after aging,the key RAP separation technologies were proposed.Then,the concept,principle,and implementation methods of physical,chemical,and biological sep-aration methods of RAP materials were comprehensively analyzed.Moreover,the advantages and disadvantages of various separation technologies were discussed by comparing them with the related technologies in the petrochemical industry.The application prospects of various asphalt-aggregate separation methods for RAP materials can provide a reference for upgrading and expanding solid waste recycling technology for asphalt pavement.

Evaluation of reclaimed asphalt pavement binder stiffness without extraction and recovery

A new testing procedure to estimate the low-temperature stiffness of the reclaimed asphalt pavement(RAP) binder was developed.In the testing procedure,the SuperpaveTM Bending Beam Rheometer(BBR) with special modifications and binder blending charts by Asphalt Institute were utilized.Modifications involved the development of a new kind of sample mold and different testing parameters were made to BBR testing procedure to capture the rheological properties of bitumen mortars produced by mixing fresh binder with fine RAP materials or RAP aggregate.The stiffness relationship between binder and bitumen mortar was established based on the BBR test results.The blended binder stiffness in bitumen RAP mortar was estimated from the RAP mortar stiffness based on the bindermortar relationship.And finally,the RAP binder stiffness was estimated from the blended binder and fresh binder stiffness based on the blending charts by Asphalt Institute.The results indicate that the new procedure can capture the rheological properties of bitumen mortar and can be used to estimate the low temperature stiffness of RAP binder without binder extraction and/or any chemical treatments.

Technical development and long-term performance observations of long-life asphalt pavement: A case study of Shandong Province

Based on the investigation of long-life asphalt pavement at home and abroad,the development of long-life asphalt pavement technology in Shandong Province,China is reviewed in this paper.The structural combination char-acteristics of typical long-life asphalt pavement in Shandong Province and their popularization and application are introduced.The application effect of combined base long-life asphalt pavement,which has been widely promoted,is evaluated.At the same time,taking the Binda perpetual pavement test road in Shandong Province as an example,the dynamic response and long-term performance evolution of long-life asphalt pavement are analyzed over a period of more than 17 years.Sections S1,S2,and S3 present information about full-depth asphalt pavement.Section S4 describes combined base asphalt pavement.The results show that the maximum strain of S1–S4 is within the endurance strain limit.S1,S2,S3 and S4 are all expected to be long-life asphalt pavements.In the current study,Sections S1–S4 were maintained in good condition during a service period of more than 17 years with no structural cracks and good deflection,rutting,and IRI indexes.The deflection index was stable without growth,and the IRI was also relatively stable following the opening to traffic.The rutting depth un-derwent a slight cumulative increase within 8 years of opening,and then stabilized.The average rutting depth over the 17-year period was less than 15 mm.Therefore,S1–S4 meet the design standards required for use as long-life pavements.From the perspectives of resource saving,energy saving,and emission reduction and service performance,full-depth asphalt pavement can be considered to represent a new generation of green and durable pavement structures with great future promotion potential.