Multi-surrogate framework with an adaptive selection mechanism for production optimization

Data-driven surrogate models that assist with efficient evolutionary algorithms to find the optimal development scheme have been widely used to solve reservoir production optimization problems.However,existing research suggests that the effectiveness of a surrogate model can vary depending on the complexity of the design problem.A surrogate model that has demonstrated success in one scenario may not perform as well in others.In the absence of prior knowledge,finding a promising surrogate model that performs well for an unknown reservoir is challenging.Moreover,the optimization process often relies on a single evolutionary algorithm,which can yield varying results across different cases.To address these limitations,this paper introduces a novel approach called the multi-surrogate framework with an adaptive selection mechanism(MSFASM)to tackle production optimization problems.MSFASM consists of two stages.In the first stage,a reduced-dimensional broad learning system(BLS)is used to adaptively select the evolutionary algorithm with the best performance during the current optimization period.In the second stage,the multi-objective algorithm,non-dominated sorting genetic algorithm II(NSGA-II),is used as an optimizer to find a set of Pareto solutions with good performance on multiple surrogate models.A novel optimal point criterion is utilized in this stage to select the Pareto solutions,thereby obtaining the desired development schemes without increasing the computational load of the numerical simulator.The two stages are combined using sequential transfer learning.From the two most important perspectives of an evolutionary algorithm and a surrogate model,the proposed method improves adaptability to optimization problems of various reservoir types.To verify the effectiveness of the proposed method,four 100-dimensional benchmark functions and two reservoir models are tested,and the results are compared with those obtained by six other surrogate-model-based methods.The results demonstrate that our approach can obtain the maximum net present value(NPV)of the target production optimization problems.

Productivity Prediction Model of Perforated Horizontal Well Based on Permeability Calculation in Near-Well High Permeability Reservoir Area

To improve the productivity of oil wells,perforation technology is usually used to improve the productivity of horizontal wells in oilfield exploitation.After the perforation operation,the perforation channel around the wellbore will form a near-well high-permeability reservoir area with the penetration depth as the radius,that is,the formation has different permeability characteristics with the perforation depth as the dividing line.Generally,the permeability is measured by the permeability tester,but this approach has a high workload and limited application.In this paper,according to the reservoir characteristics of perforated horizontal wells,the reservoir is divided into two areas:the original reservoir area and the near-well high permeability reservoir area.Based on the theory of seepage mechanics and the formula of open hole productivity,the permeability calculation formula of near-well high permeability reservoir area with perforation parameters is deduced.According to the principle of seepage continuity,the seepage is regarded as the synthesis of two directions:the horizontal plane elliptic seepage field and the vertical plane radial seepage field,and the oil well productivity prediction model of the perforated horizontal well is established by partition.The model comparison demonstrates that the model is reasonable and feasible.To calculate and analyze the effect of oil well production and the law of influencing factors,actual production data of the oilfield are substituted into the oil well productivity formula.It can effectively guide the technical process design and effect prediction of perforated horizontal wells.

Shale gas production evaluation framework based on data-driven models

Increasing the production and utilization of shale gas is of great significance for building a clean and low-carbon energy system.Sharp decline of gas production has been widely observed in shale gas reservoirs.How to forecast shale gas production is still challenging due to complex fracture networks,dynamic fracture properties,frac hits,complicated multiphase flow,and multi-scale flow as well as data quality and uncertainty.This work develops an integrated framework for evaluating shale gas well production based on data-driven models.Firstly,a comprehensive dominated-factor system has been established,including geological,drilling,fracturing,and production factors.Data processing and visualization are required to ensure data quality and determine final data set.A shale gas production evaluation model is developed to evaluate shale gas production levels.Finally,the random forest algorithm is used to forecast shale gas production.The prediction accuracy of shale gas production level is higher than 95%based on the shale gas reservoirs in China.Forty-one wells are randomly selected to predict cumulative gas production using the optimal regression model.The proposed shale gas production evaluation frame-work overcomes too many assumptions of analytical or semi-analytical models and avoids huge computation cost and poor generalization for numerical modelling.

Revolutionizing Tight Reservoir Production: A Novel Dual-Medium Unsteady Seepage Model for Optimizing Volumetrically Fractured Horizontal Wells

This study presents an avant-garde approach for predicting and optimizing production in tight reservoirs,employing a dual-medium unsteady seepage model specifically fashioned for volumetrically fractured horizontal wells.Traditional models often fail to fully capture the complex dynamics associated with these unconventional reservoirs.In a significant departure from these models,our approach incorporates an initiation pressure gradient and a discrete fracture seepage network,providing a more realistic representation of the seepage process.The model also integrates an enhanced fluid-solid interaction,which allows for a more comprehensive understanding of the fluid-structure interactions in the reservoir.This is achieved through the incorporation of improved permeability and stress coupling,leading to more precise predictions of reservoir behavior.The numerical solutions derived from the model are obtained through the sophisticated finite element method,ensuring high accuracy and computational efficiency.To ensure the model’s reliability and accuracy,the outcomes were tested against a real-world case,with results demonstrating strong alignment.A key revelation from the study is the significant difference between uncoupled and fully coupled volumetrically fractured horizontal wells,challenging conventional wisdom in the field.Additionally,the study delves into the effects of stress,fracture length,and fracture number on reservoir production,contributing valuable insights for the design and optimization of tight reservoirs.The findings from this study have the potential to revolutionize the field of tight reservoir prediction and management,offering significant advancements in petroleum engineering.The proposed approach brings forth a more nuanced understanding of tight reservoir systems and opens up new avenues for optimizing reservoir management and production.

Identifying Counterexamples Without Variability in Software Product Line Model Checking

Product detection based on state abstraction technologies in the software product line(SPL)is more complex when compared to a single system.This variability constitutes a new complexity,and the counterexample may be valid for some products but spurious for others.In this paper,we found that spurious products are primarily due to the failure states,which correspond to the spurious counterexamples.The violated products correspond to the real counterexamples.Hence,identifying counterexamples is a critical problem in detecting violated products.In our approach,we obtain the violated products through the genuine counterexamples,which have no failure state,to avoid the tedious computation of identifying spurious products dealt with by the existing algorithm.This can be executed in parallel to improve the efficiency further.Experimental results showthat our approach performswell,varying with the growth of the system scale.By analyzing counterexamples in the abstract model,we observed that spurious products occur in the failure state.The approach helps in identifying whether a counterexample is spurious or genuine.The approach also helps to check whether a failure state exists in the counterexample.The performance evaluation shows that the proposed approach helps significantly in improving the efficiency of abstraction-based SPL model checking.

Hydrogen production via steam reforming of bio-oil model compounds over supported nickel catalysts

The steam reforming of four bio-oil model compounds（acetic acid,ethanol,acetone and phenol） was investigated over Ni-based catalysts supported on Al2O3 modified by Mg,Ce or Co in this paper.The activation process can improve the catalytic activity with the change of high-valence Ni（Ni2O3,NiO） to low-valence Ni（Ni,NiO）.Among these catalysts after activation,the Ce-Ni/Co catalyst showed the best catalytic activity for the steam reforming of all the four model compounds.After long-term experiment at 700°C and the S/C ratio of 9,the Ce-Ni/Co catalyst still maintained excellent stability for the steam reforming of the simulated bio-oil（mixed by the four compounds with the equal masses）.With CaO calcinated from calcium acetate as CO2 sorbent,the catalytic steam reforming experiment combined with continuous in situ CO2 adsorption was performed.With the comparison of the case without the adding of CO2 sorbent,the hydrogen concentration was dramatically improved from 74.8% to 92.3%,with the CO2 concentration obviously decreased from 19.90% to 1.88%.

Technological Options to Ameliorate Waste Treatment of Intensive Pig Production in China:An Analysis Based on Bio-Economic Model

Ameliorating waste treatment by technological improvements affects the economic and the ecological-environment benefits of intensive pig production. The objective of the research was to develop and test a method to determine the technical optimization to ameliorate waste treatment methods and gain insight into the relationship between technological options and the economic and ecological effects. We developed an integrated bio-economic model which incorporates the farming production and waste disposal systems to simulate the impact of technological improvements in pig manure treatment on economic and environmental benefits for the case of a pilot farm in Beijing, China. Based on different waste treatment technology options, three scenarios are applied for the simulation analysis of the model. The simulation results reveal that the economic-environmental benefits of the livestock farm could be improved by reducing the cropland manure application and increasing the composting production with the current technologies. Nevertheless, the technical efficiency, the waste treatment capacity and the economic benefits could be further improved by the introduction of new technologies. It implies that technological and economic support policies should be implemented comprehensively on waste disposal and resource utilization to promote sustainable development in intensive livestock production in China.

Modeling China's offshore production sharing contracts using meta analysis

Production sharing contracts have been used in the development of China’s offshore petroleum resources since 1982, but the mechanism in which the fiscal terms impact project economics is complicated and not well understood. The purpose of this paper is to model China’s offshore production sharing contracts using a probabilistic approach. Cash flows and economic indicators are used for a typical offshore oilfield development, and meta-models are constructed to analyze the basic features of the fiscal system. Applications of the models in contract negotiation are discussed.

Improving remote sensing-based net primary production estimation in the grazed land with defoliation formulation model

Remote sensing(RS) technologies provide robust techniques for quantifying net primary productivity(NPP) which is a key component of ecosystem production management. Applying RS, the confounding effects of carbon consumed by livestock grazing were neglected by previous studies, which created uncertainties and underestimation of NPP for the grazed lands. The grasslands in Xinjiang were selected as a case study to improve the RS based NPP estimation. A defoliation formulation model(DFM) based on RS is developed to evaluate the extent of underestimated NPP between 1982 and 2011. The estimates were then used to examine the spatiotemporal patterns of the calculated NPP. Results show that average annual underestimated NPP was 55.74 gC·m^(-2)yr^(-1) over the time period understudied, accounting for 29.06% of the total NPP for the Xinjiang grasslands. The spatial distribution of underestimated NPP is related to both grazing intensity and time. Data for the Xinjiang grasslands show that the average annual NPP was 179.41 gC·m^(-2)yr^(-1), the annual NPP with an increasing trend was observed at a rate of 1.04 gC·m^(-2)yr^(-1) between 1982 and 2011. The spatial distribution of NPP reveals distinct variations from high to low encompassing the geolocations of the Tianshan Mountains, northern and southern Xinjiang Province and corresponding with mid-mountain meadow, typical grassland, desert grassland, alpine meadow, and saline meadow grassland types. This study contributes to improving RS-based NPP estimations for grazed land and provides a more accurate data to support the scientific management of fragile grassland ecosystems in Xinjiang.

A new method to evaluate integrated production system capacity in oil fields

To improve the design and management of an integrated production system(IPS),a set of mathematical models and workflows are developed for evaluating the capacity of an IPS at steady-state conditions.Combining the conservation laws with applicable multiphase fluid and choke models,these mathematical models are solved to characterize the hydraulics of an integrated system of reservoir,wells,chokes,flowlines,and separator at steady state.The controllable variables such as well count,choke size and separator pressure are adjusted to optimize the performance of the IPs at a specific time.It is found that increasing the well count can increase the bulk flow rate of the production network,but too many wells may increase the manifold pressure,leading to decline of single-well production.Increasing the choke size can improve the capacity of the IPs.The production of the IPs is negatively correlated with the separator pressure.With increasing separator pressure and decreasing choke size,the increment of total fluid production(the capacity of IPS)induced by increasing well count decreases.Validation tests with field examples show a maximum absolute deviation is 1.5%,demonstrating the robustness and validity of the proposed mathematical models and workflows.

Water yield and biomass production for on a eucalypt-dominated Mediterranean catchment under different climate scenarios

Worldwide,forests are vital in the regulation of the water cycle regulation and in water balance allocation.Knowledge of ecohydrological responses of production forests is essential to support management strategies,especially where water is already scarce.Shifting climatological patterns are expected to impact thermopluviometric regimes,water cycle components,hydrological responses,and plant physiology,evapotranspiration rates,crop productivity and land management operations.This work(1)assessed the impacts of different predicted climate conditions on water yield;(2)inferred the impacts of climate change on biomass production on eucalypt-to-eucalypt succes sion.To this end,the widely accepted Soil and Water Assessment Tool(SWAT)was run with the RCA,HIRHAM5 and RACMO climate models for two emission scenarios(RCP 4.5 and8.5).Three 12-year periods were considered to simulate tree growth under coppice regime.The results revealed an overall reduction in streamflow and water yield in the catchment in line with the projected reduction in total annual precipitation.Moreover,HIRHAM5 and RACMO models forecast a slight shift in seasonal streamflow of up to 2 months(for2024-2048)in line with the projected increase in precipitation from May to September.For biomass production,the extreme climate model(RCA)and severe emis sion scenario(RCP 8.5)predicted a decrease up to 46%.However,in the less extreme and more-correlated(with actual catchment climate conditions)climate models(RACMO and HIRHAM5)and in the less extreme emission scenario(RCP 4.5),biomass production increased(up to 20%),and the growth cycle was slightly reduced.SWAT was proven to be a valuable tool to assess climate change impacts on a eucalypt-dominated catchment and is a suitable decision-support tool for forest managers.

Constructing the Ontology for Modeling the Fish Production in Pearl River Basin

This paper puts forward a construction method based on ontology for the Pearl River Basin fish production, to facilitate the domain knowledge analysis and information retrieval. By converting the concepts and terms in domain ordinally, the fish production ontology was constructed with the definition of classes, properties, instances, and relationships. The developed ontology model of the fish production knowledge is proposed and applied in the system of fish diseases diagnosis primarily. The research lays the semantic foundation for the further efficient knowledge management and practical application.

RECONFIGURABLE PRODUCTION LINE MODELING AND SCHEDULING USING PETRI NETS AND GENETIC ALGORITHM

In response to the production capacity and functionality variations, a genetic algorithm （GA） embedded with deterministic timed Petri nets（DTPN） for reconfigurable production line（RPL） is proposed to solve its scheduling problem. The basic DTPN modules are presented to model the corresponding variable structures in RPL, and then the scheduling model of the whole RPL is constructed. And in the scheduling algorithm, firing sequences of the Petri nets model are used as chromosomes, thus the selection, crossover, and mutation operator do not deal with the elements in the problem space, but the elements of Petri nets model. Accordingly, all the algorithms for GA operations embedded with Petri nets model are proposed. Moreover, the new weighted single-objective optimization based on reconfiguration cost and E/T is used. The results of a DC motor RPL scheduling suggest that the presented DTPN-GA scheduling algorithm has a significant impact on RPL scheduling, and provide obvious improvements over the conventional scheduling method in practice that meets duedate, minimizes reconfiguration cost, and enhances cost effectivity.

Multiproduct and multistage integrated production planning model and algorithm based on an available production capacity network

This research attempts to devise a multistage and multiproduct short-term integrative production plan that can dynamically change based on the order priority and virtual occupancy for application in steel plants. Considering factors such as the delivery time, varietal compatibility between different products, production capacity of variety per hour, minimum or maximum batch size, and transfer time, we propose an available production capacity network with varietal compatibility and virtual occupancy for enhancing production plan implementation and quick adjustment in the case of dynamic production changes. Here available means the remaining production capacity after virtual occupancy.To quickly build an available production capacity network and increase the speed of algorithm solving, constraint selection and cutting methods with order priority were used for model solving. Finally, the genetic algorithm improved with local search was used to optimize the proposed production plan and significantly reduce the order delay rate. The validity of the proposed model and algorithm was numerically verified by simulating actual production practices. The simulation results demonstrate that the model and improved algorithm result in an effective production plan.

Towards Production and Energy Coupling System Modeling and Simulation for Energy Optimization in the Process Industry

The production and energy coupling system is used to mainly present energy flow, material flow, information flow, and their coupling interaction. Through the modeling and simulation of this system, the performance of energy flow can be analyzed and optimized in the process industry. In order to study this system, the component based hybrid Petri net methodology (CpnHPN) is proposed, synthesizing a number of extended Petri net methods and using the concept of energy place, material place, and information place. Through the interface place in CpnHPN, the component based encapsulation is established, which enables the production and energy coupling system to be built, analyzed, and optimized on the multi-level framework. Considering the block and brief simulation for hybrid system, the CpnHPN model is simulated with Simulink/Stateflow. To illustrate the use of the proposed methodology, the application of CpnHPN in the energy optimization of chlorine balance system is provided.

Modeling and Analysis on Production Yield and Energy Consumption of Pelleting Process

The existing studies on the pelleting process were reviewed, and then the forming process of pelleting was introduced. Furthermore, the models describing the production yield and energy consumption of pelleting were presented. Based on the models, the influence of the pelleting structure parameters, die speed on the production yield and energy consumption were discussed. The results showed that larger pellet mill was preferred and the proper speed of the die should be selected to increase the production yield and reduce the energy consumption.

Production Management Modelling Based on MAS

Modelling based on multi-agent system （MAS） was built for the current production management and process of Shenyang Songyang Paper Cup Co., Ltd. It can transmit the information instantly via order agent （OA）, manager agent （MA）, production agent （PA）, and service agent （SA）, and realize information sharing. The PA is also built on MAS, and it includes two agents, task agent （TA）, and resource agent （RA）. It has been found that the modelling is superior to the old one. It can improve the working flow and production efficiency, and shorten the time of delivery.

Analysis and Forecast of MSW Production Based on the ARIMA Model in Beijing

Based on the data of MSW generation in Beijing from 2004 to 2012,an ARIMA model of time series analysis was established. By contrast of the modeling results of different yearly data,the forecast period was identified to be 10 years. The yearly production of MSW from 2015 to 2025 was forecasted by using SPSS 16. 0 software. Result shows that the forecasting effect of ARIMA( 1,0,1) model is relatively good,and it can be applied to prediction of MSW production in Beijing. In the next 10 years,the amount of MSW produced in Beijing is increasing,but the growth rate is not large. Is expected to 2025,the production of MSW will reach more than 9 million tons. Taking into account the MSW return,it is inferred that the production of MSW in Beijing in 2025 will be close to 10 million tons. In order to reduce the pressure of subsequent waste disposal facilities in Beijing,the government can increase the intensity of the recycling of waste materials.

Response of Growing Season Gross Primary Production to El Nino in Different Phases of the Pacific Decadal Oscillation over Eastern China Based on Bayesian Model Averaging

Gross primary production(GPP) plays a crucial part in the carbon cycle of terrestrial ecosystems.A set of validated monthly GPP data from 1957 to 2010 in 0.5°× 0.5° grids of China was weighted from the Multi-scale Terrestrial Model Intercomparison Project using Bayesian model averaging(BMA).The spatial anomalies of detrended BMA GPP during the growing seasons of typical El Nino years indicated that GPP response to El Nino varies with Pacific Decadal Oscillation(PDO) phases: when the PDO was in the cool phase,it was likely that GPP was greater in northern China(32°–38°N,111°–122°E) and less in the Yangtze River valley(28°–32°N,111°–122°E);in contrast,when PDO was in the warm phase,the GPP anomalies were usually reversed in these two regions.The consistent spatiotemporal pattern and high partial correlation revealed that rainfall dominated this phenomenon.The previously published findings on how El Nino during different phases of PDO affecting rainfall in eastern China make the statistical relationship between GPP and El Nino in this study theoretically credible.This paper not only introduces an effective way to use BMA in grids that have mixed plant function types,but also makes it possible to evaluate the carbon cycle in eastern China based on the prediction of El Nino and PDO.

Uncertain Multidisciplinary Design Optimization on Next Generation Subsea Production System by Using Surrogate Model and Interval Method

The innovative Next Generation Subsea Production System(NextGen SPS)concept is a newly proposed petroleum development solution in ultra-deep water areas.The definition of NextGen SPS involves several disciplines,which makes the design process difficult.In this paper,the definition of NextGen SPS is modeled as an uncertain multidisciplinary design optimization(MDO)problem.The deterministic optimization model is formulated,and three concerning disciplines—cost calculation,hydrodynamic analysis and global performance analysis are presented.Surrogate model technique is applied in the latter two disciplines.Collaborative optimization(CO)architecture is utilized to organize the concerning disciplines.A deterministic CO framework with two disciplinelevel optimizations is proposed firstly.Then the uncertainties of design parameters and surrogate models are incorporated by using interval method,and uncertain CO frameworks with triple loop and double loop optimization structure are established respectively.The optimization results illustrate that,although the deterministic MDO result achieves higher reduction in objective function than the uncertain MDO result,the latter is more reliable than the former.