The manufacturing process, characteristics, and application results of arod-like penetrative additive (the penetrative rod) were discussed. The components and functions ofthe penetrative rod were studied carefully. A ...The manufacturing process, characteristics, and application results of arod-like penetrative additive (the penetrative rod) were discussed. The components and functions ofthe penetrative rod were studied carefully. A large number of orthogonal combined tests were carriedout and over 100 sample molds were made. Ultimately the components were decided after carefulselection among these molds, mainly including hygroscopic major components and auxiliary material.The results of on-site practical application show that such an addictive can increase the waterpenetrative ability effectively and has a remarkable effect on preventing dust production duringcoal seam excavation. The penetrating radius, the infusing velocity and the dust-preventive effectwere systematically studied.展开更多
Based on the equation of momentum conservation, an improved equation for the quisi-steady penetration of a long rod into homogeneous semi-infinite targets has been derived, assuming that the flow interface between the...Based on the equation of momentum conservation, an improved equation for the quisi-steady penetration of a long rod into homogeneous semi-infinite targets has been derived, assuming that the flow interface between the rod material and the target material is hemispherical and that the normal pressure on the interface is defined by the dynamic spherical cavity expansion. The equation has a form similar to the Tate equation, and the parameters in this equation have definite physical senses and practical values..展开更多
A theoretical study is presented herein on the pen- etration of a semi-infinite target by a spherical-headed long rod for Yp 〉 S, where Yp is the penetrator strength and S is the static target resistance. For Yp 〉 S...A theoretical study is presented herein on the pen- etration of a semi-infinite target by a spherical-headed long rod for Yp 〉 S, where Yp is the penetrator strength and S is the static target resistance. For Yp 〉 S, depending upon initial impact velocity, there exist three types of penetration, namely, penetration by a rigid long rod, penetration by a deforming non-erosive long rod and penetration by an erosive long rod. If the impact velocity of the penetrator is higher than the hydrodynamic velocity （VH）, it will penetrate the target in an erosive mode; if the impact velocity lies between the hydrodynamic velocity （VH） and the rigid body velocity （VR）, it will penetrate the target in a deformable mode; if the impact velocity is less than the rigid body velocity （VR）, it will penetrate the target in a rigid mode. The critical conditions for the transition among these three penetration modes are proposed. It is demonstrated that the present model predictions correlate well with the experimental observations in terms of depth of penetration （DOP） and the critical transition conditions.展开更多
This paper examines the influence of gravity on the bulk responses of a granular solid. The loading scenarios in this study include confined compression, rod penetration into a granular medium and discharging through ...This paper examines the influence of gravity on the bulk responses of a granular solid. The loading scenarios in this study include confined compression, rod penetration into a granular medium and discharging through an orifice. Similar loading and flow conditions are likely to be encountered in the stress and deformation regimes that regoliths are subjected to in extraterrestrial exploration activities including in situ resource utilisation processes. Both spherical and non-spherical particles were studied using the discrete element method （DEM）. Whilst DEM is increasingly used to model granular solids, careful validations of the simulation outcomes are rather rare. Thus in addition to exploring the effect of gravity, this paper also compares DEM simulations with experiments under terrestrial condition to verify whether DEM can produce satisfactory predictions. The terrestrial experiments were conducted with great care and simulated closely using DEM. The key mechanical and geometrical properties for the particles were measured in laboratory tests for use in the DEM simulations. A series of DEM computations were then performed under reduced gravity to simulate these experiments under extraterrestrial environment. It was found that gravity has no noticeable effect on the force transmission in the confined compression case; the loading gradient in the rod penetration is linearly proportional to the gravity; the mass flow rate in silo discharge is proportional to square root of the gravity and the angle of repose increases with reducing gravity. These findings are in agreement with expectation and existing scientific evidence.展开更多
文摘The manufacturing process, characteristics, and application results of arod-like penetrative additive (the penetrative rod) were discussed. The components and functions ofthe penetrative rod were studied carefully. A large number of orthogonal combined tests were carriedout and over 100 sample molds were made. Ultimately the components were decided after carefulselection among these molds, mainly including hygroscopic major components and auxiliary material.The results of on-site practical application show that such an addictive can increase the waterpenetrative ability effectively and has a remarkable effect on preventing dust production duringcoal seam excavation. The penetrating radius, the infusing velocity and the dust-preventive effectwere systematically studied.
文摘Based on the equation of momentum conservation, an improved equation for the quisi-steady penetration of a long rod into homogeneous semi-infinite targets has been derived, assuming that the flow interface between the rod material and the target material is hemispherical and that the normal pressure on the interface is defined by the dynamic spherical cavity expansion. The equation has a form similar to the Tate equation, and the parameters in this equation have definite physical senses and practical values..
基金supported by the National Natural Science Foundation of China (10872195)
文摘A theoretical study is presented herein on the pen- etration of a semi-infinite target by a spherical-headed long rod for Yp 〉 S, where Yp is the penetrator strength and S is the static target resistance. For Yp 〉 S, depending upon initial impact velocity, there exist three types of penetration, namely, penetration by a rigid long rod, penetration by a deforming non-erosive long rod and penetration by an erosive long rod. If the impact velocity of the penetrator is higher than the hydrodynamic velocity （VH）, it will penetrate the target in an erosive mode; if the impact velocity lies between the hydrodynamic velocity （VH） and the rigid body velocity （VR）, it will penetrate the target in a deformable mode; if the impact velocity is less than the rigid body velocity （VR）, it will penetrate the target in a rigid mode. The critical conditions for the transition among these three penetration modes are proposed. It is demonstrated that the present model predictions correlate well with the experimental observations in terms of depth of penetration （DOP） and the critical transition conditions.
文摘This paper examines the influence of gravity on the bulk responses of a granular solid. The loading scenarios in this study include confined compression, rod penetration into a granular medium and discharging through an orifice. Similar loading and flow conditions are likely to be encountered in the stress and deformation regimes that regoliths are subjected to in extraterrestrial exploration activities including in situ resource utilisation processes. Both spherical and non-spherical particles were studied using the discrete element method （DEM）. Whilst DEM is increasingly used to model granular solids, careful validations of the simulation outcomes are rather rare. Thus in addition to exploring the effect of gravity, this paper also compares DEM simulations with experiments under terrestrial condition to verify whether DEM can produce satisfactory predictions. The terrestrial experiments were conducted with great care and simulated closely using DEM. The key mechanical and geometrical properties for the particles were measured in laboratory tests for use in the DEM simulations. A series of DEM computations were then performed under reduced gravity to simulate these experiments under extraterrestrial environment. It was found that gravity has no noticeable effect on the force transmission in the confined compression case; the loading gradient in the rod penetration is linearly proportional to the gravity; the mass flow rate in silo discharge is proportional to square root of the gravity and the angle of repose increases with reducing gravity. These findings are in agreement with expectation and existing scientific evidence.
