Based on the surveys and the statistic data during 1980-2003, the variation character of grain yield per unit area in Northeast China and its main factors have been discussed by the methods of statistics and grey corr...Based on the surveys and the statistic data during 1980-2003, the variation character of grain yield per unit area in Northeast China and its main factors have been discussed by the methods of statistics and grey correlation analysis. The results show that: 1) the grain yield per unit area has been taking on an increasing trend in the recent 20 years. It increased from 2519.80kg/ha in 1980 to 4216.11kg/ha in 2003, with an increasing rate of 67.32%; 2) the variation of grain yield per unit area is considerably prominent and its range is also very great, with the maximal increase rate of 42.59% and maximal decrease rate of 21.13%, respectively, which are far above the whole Chinese average level; 3) the variation of main crops' yield per unit area is remarkable, which takes on the character that the yield of corn is much higher than that of soybean and rice; and 4) the grey correlation analysis shows that the most important factors impacting the variation of grain yield per unit area are the total power of agricultural machinery, the consumption of chemical fertilizer and effective irrigated area. However, the influence of natural disaster and income level should not be ignored. Effective ways to improve grain yield per unit area are to construct farmland improvement groundwork, reclaim the middle- and low-yield farmland, etc.展开更多
In Haigh Westergaard stress space linear combination of twin shear stress and Tresca yield functions is called the mean yield （MY） criterion. The mathematical relationship of the criterion and its plastic work rate ...In Haigh Westergaard stress space linear combination of twin shear stress and Tresca yield functions is called the mean yield （MY） criterion. The mathematical relationship of the criterion and its plastic work rate done per unit volume were derived. A generalized worked example of slab forging was analyzed by the criterion and its corresponding plastic work rate done per unit volume. Then, the precision of the solution was compared with those by Mises and Twin shear stress yield criterions, respectively. It turned out that the calculated results by MY criterion were in good agreement with those by Mises criterion.展开更多
This paper aims to present a case study that consists in the analysis of work effort per unit of software systems Development and Enhancement Projects (D&EP) depending on technological factors. That analysis was c...This paper aims to present a case study that consists in the analysis of work effort per unit of software systems Development and Enhancement Projects (D&EP) depending on technological factors. That analysis was commissioned by one of the largest public institutions in Poland. This is the COSMIC (Common Software Measurement International Consortium) function points method that is chosen by this institution as a point of reference for size of software systems developed/enhanced for supporting its functions and therefore this method is the base for the analysis of D&EP work effort per unit with regard to technological factors.展开更多
Macro and micromixing time represent two extreme mixing time scales,which governs the whole hydrodynamics characteristics of the surface aeration systems.With the help of experimental and numerical analysis,simulation...Macro and micromixing time represent two extreme mixing time scales,which governs the whole hydrodynamics characteristics of the surface aeration systems.With the help of experimental and numerical analysis,simulation equation governing those times scale has been presented in the present work.展开更多
Dynamic nonlinearities of C70/toluene solution are measured and analysed by an improved picosecond timeresolved pump-probe system based on a nonlinear imaging technique with phase object. The photophysical parameters ...Dynamic nonlinearities of C70/toluene solution are measured and analysed by an improved picosecond timeresolved pump-probe system based on a nonlinear imaging technique with phase object. The photophysical parameters are determined by the five-level model, which is adopted to interpret the experimental data. The change of refraction index per unit density of the excited state obtained by a numerically simulation is a critical factor to determine the nonlinear behaviour of C70 in picosecond time regime.展开更多
The enhanced power quality provided by multilevel inverters(MLIs)has made them more appropriate for medium-and high-power applications,including photovoltaic systems.Nevertheless,a prevalent limitation involves the ne...The enhanced power quality provided by multilevel inverters(MLIs)has made them more appropriate for medium-and high-power applications,including photovoltaic systems.Nevertheless,a prevalent limitation involves the necessity for numerous switches and increased voltage stress across these switches,consequently increasing the overall system cost.To address these challenges,a new 17-level asymmetrical MLI with fewer components and low voltage stress is proposed for the photovoltaic system.This innovative MLI configuration has four direct current(DC)sources and 10 switches.Based on the trinary sequence,the proposed topology uses photovoltaics with boost converters and fuzzy logic controllers as its DC sources.Mathematical equations are used to calculate cru-cial parameters for this proposed design,including total standing voltage per unit(TSVPU),cost function per level(CF/L),component count per level(CC/L)and voltage stress across the switches.The comparison is conducted by considering switches,DC sources,TSVPU,CF/L,gate driver circuits and CC/L with other existing MLI topologies.The analysis is carried out under various conditions,encompassing different levels of irradiance,variable loads and modulation indices.To reduce the total harmonic distortion of the suggested topology,the phase opposition disposition approach has been incorporated.The suggested framework is simulated in MATLAB®/Simulink®.The results indicate that the proposed topology achieves a well-distributed stress profile across the switches and has CC/L of 1.23,TSVPU of 5 and CF/L of 4.58 and 5.76 with weight coefficients of 0.5 and 1.5,respectively.These values are not-ably superior to those of existing MLI topologies.Simulation results demonstrate that the proposed topology maintains a consistent output at varying irradiance levels with FLCs and exhibits robust performance under variable loads and diverse modulation indices.Furthermore,the total harmonic distortion achieved with phase opposition disposition is 7.78%,outperforming alternative pulse width modulation techniques.In summary,it provides enhanced performance.Considering this,it is suitable for the photovoltaic system.展开更多
基金Under the auspices of the National Natural Science Foundation of China (No. 40601027)
文摘Based on the surveys and the statistic data during 1980-2003, the variation character of grain yield per unit area in Northeast China and its main factors have been discussed by the methods of statistics and grey correlation analysis. The results show that: 1) the grain yield per unit area has been taking on an increasing trend in the recent 20 years. It increased from 2519.80kg/ha in 1980 to 4216.11kg/ha in 2003, with an increasing rate of 67.32%; 2) the variation of grain yield per unit area is considerably prominent and its range is also very great, with the maximal increase rate of 42.59% and maximal decrease rate of 21.13%, respectively, which are far above the whole Chinese average level; 3) the variation of main crops' yield per unit area is remarkable, which takes on the character that the yield of corn is much higher than that of soybean and rice; and 4) the grey correlation analysis shows that the most important factors impacting the variation of grain yield per unit area are the total power of agricultural machinery, the consumption of chemical fertilizer and effective irrigated area. However, the influence of natural disaster and income level should not be ignored. Effective ways to improve grain yield per unit area are to construct farmland improvement groundwork, reclaim the middle- and low-yield farmland, etc.
基金This research was supported by the National Natural Sci—ence Foundation of China(Grant No.50474015)
文摘In Haigh Westergaard stress space linear combination of twin shear stress and Tresca yield functions is called the mean yield （MY） criterion. The mathematical relationship of the criterion and its plastic work rate done per unit volume were derived. A generalized worked example of slab forging was analyzed by the criterion and its corresponding plastic work rate done per unit volume. Then, the precision of the solution was compared with those by Mises and Twin shear stress yield criterions, respectively. It turned out that the calculated results by MY criterion were in good agreement with those by Mises criterion.
文摘This paper aims to present a case study that consists in the analysis of work effort per unit of software systems Development and Enhancement Projects (D&EP) depending on technological factors. That analysis was commissioned by one of the largest public institutions in Poland. This is the COSMIC (Common Software Measurement International Consortium) function points method that is chosen by this institution as a point of reference for size of software systems developed/enhanced for supporting its functions and therefore this method is the base for the analysis of D&EP work effort per unit with regard to technological factors.
基金Supported by the Department of Science and Technology,Government of India (DSTO717)
文摘Macro and micromixing time represent two extreme mixing time scales,which governs the whole hydrodynamics characteristics of the surface aeration systems.With the help of experimental and numerical analysis,simulation equation governing those times scale has been presented in the present work.
基金Project supported by the National Natural Science Fundation of China(Grant No.90922007)
文摘Dynamic nonlinearities of C70/toluene solution are measured and analysed by an improved picosecond timeresolved pump-probe system based on a nonlinear imaging technique with phase object. The photophysical parameters are determined by the five-level model, which is adopted to interpret the experimental data. The change of refraction index per unit density of the excited state obtained by a numerically simulation is a critical factor to determine the nonlinear behaviour of C70 in picosecond time regime.
文摘The enhanced power quality provided by multilevel inverters(MLIs)has made them more appropriate for medium-and high-power applications,including photovoltaic systems.Nevertheless,a prevalent limitation involves the necessity for numerous switches and increased voltage stress across these switches,consequently increasing the overall system cost.To address these challenges,a new 17-level asymmetrical MLI with fewer components and low voltage stress is proposed for the photovoltaic system.This innovative MLI configuration has four direct current(DC)sources and 10 switches.Based on the trinary sequence,the proposed topology uses photovoltaics with boost converters and fuzzy logic controllers as its DC sources.Mathematical equations are used to calculate cru-cial parameters for this proposed design,including total standing voltage per unit(TSVPU),cost function per level(CF/L),component count per level(CC/L)and voltage stress across the switches.The comparison is conducted by considering switches,DC sources,TSVPU,CF/L,gate driver circuits and CC/L with other existing MLI topologies.The analysis is carried out under various conditions,encompassing different levels of irradiance,variable loads and modulation indices.To reduce the total harmonic distortion of the suggested topology,the phase opposition disposition approach has been incorporated.The suggested framework is simulated in MATLAB®/Simulink®.The results indicate that the proposed topology achieves a well-distributed stress profile across the switches and has CC/L of 1.23,TSVPU of 5 and CF/L of 4.58 and 5.76 with weight coefficients of 0.5 and 1.5,respectively.These values are not-ably superior to those of existing MLI topologies.Simulation results demonstrate that the proposed topology maintains a consistent output at varying irradiance levels with FLCs and exhibits robust performance under variable loads and diverse modulation indices.Furthermore,the total harmonic distortion achieved with phase opposition disposition is 7.78%,outperforming alternative pulse width modulation techniques.In summary,it provides enhanced performance.Considering this,it is suitable for the photovoltaic system.
