Simple preparation of C(CS)/g-C_(3)N_(4)/Co carbon aerogel and its catalytic performance for ammonium perchlorate

Biomass chitosan(CS)was used as a template,graphitic phase carbon nitride(g-C_(3)N_(4))with high nitrogen content and certain catalytic activity was used as a dopant,and nano-transition metal cobalt(Co)was used as a catalytic center point.The carbon aerogel(C(CS)/g-C_(3)N_(4)/Co)with a three-dimensional network-like structure was prepared by assembling the three materials through experimental operations such as freeze-drying and high-temperature carbonization.It was demonstrated by scanning and transmission characterization that the CS in the carbon aerogel could provide more active sites for the cobalt nanoparticles,and the doping of graphite-phase carbon nitride as a template dispersed the cobalt nanoparticles and changed the conductivity of the CS.To investigate the catalytic effect of carbon aerogel on ammonium perchlorate(AP),it was investigated by differential thermal analyzer and TG thermal analysis.This carbon aerogel was very effective in catalyzing AP,and the 10 wt% content of the catalyst reduced the AP pyrolysis peak from 703.9 to 595.5 K.And to further investigate the synergistic effect of the three materials,further carbon aerogels such as C(CS)/Co,g-C_(3)N_(4)/Co were prepared and applied to catalyze AP,and the same ratio reduced the AP pyrolysis peak by 98.1℃ and 97.7℃.This result indicates a synergistic effect of the assembly of the three materials.

Micro-aluminum powder with bi-or tri-component alloy coating as a promising catalyst:Boosting pyrolysis and combustion of ammonium perchlorate

A novel design of micro-aluminum(μAl)powder coated with bi-/tri-component alloy layer,such as:Ni-P and Ni-P-Cu(namely,Al@Ni-P,Al@Ni-P-Cu,respectively),as combustion catalysts,were introduced to release its huge energy inside Al-core and promote rapid pyrolysis of ammonium perchlorate(AP)at a lower temperature in aluminized propellants.The microstructure of Al@Ni-P-Cu demonstrates that a three-layer Ni-P-Cu shell,with the thickness of~100 nm,is uniformly supported byμAl carrier(fuel unit),which has an amorphous surface with a thickness of~2.3 nm(catalytic unit).The peak temperature of AP with the addition of Al@Ni-P-Cu(3.5%)could significantly drop to 316.2℃ at high-temperature thermal decomposition,reduced by 124.3℃,in comparison to that of pure AP with 440.5℃.It illustrated that the introduction of Al@Ni-P-Cu could weaken or even eliminate the obstacle of AP pyrolysis due to its reduction of activation energy with 118.28 kJ/mol.The laser ignition results showed that the ignition delay time of Al@Ni-P-Cu/AP mixture with 78 ms in air is shorter than that of Al@Ni-P/AP(118 ms),decreased by 33.90%.Those astonishing breakthroughs were attributed to the synergistic effects of adequate active sites on amorphous surface and oxidation exothermic reactions(7597.7 J/g)of Al@Ni-P-Cu,resulting in accelerated mass and/or heat transfer rate to catalyze AP pyrolysis and combustion.Moreover,it is believed to provide an alternative Al-based combustion catalyst for propellant designer,to promote the development the propellants toward a higher energy.

Associations of Perchlorate,Nitrate,and Thiocyanate with Sex Hormones among Children:A Nationally Representative Cross-sectional Study in U.S.

Nitrates,thiocyanates,and perchlorates are ubiquitous in the environment and can be introduced to the public through various dietary and environmental sources.Nitrates,thiocyanates,and perchlorates mainly affect health via the same mechanism.These toxins may act as endocrine disrupters and can result in decreased levels of thyroid hormones^([1]).

Synthesis of Co Nanoparticles and Their Catalytic Effect on the Decomposition of Ammonium Perchlorate

The monodispersed Co nanoparticles were successfully prepared by means of hydrogen plasma method in inert atmosphere. The particle size, specific surface area, crystal structure and morphology of the samples were characterized by transmission electron microscopy （TEM）, BET equation, X-ray diffraction （XRD）, and the corresponding selected area electron diffraction （SAED）. The catalytic effect of Co nanoparticles on the decomposition of ammonium perchlorate （AP） was investigated by differential thermal analyzer （DTA）. Compared with the thermal decomposition of pure AP, the addition of Co nanoparticles （2%-10%, by mass） decreases the decomposition temperature of AP by 145.01-155.72℃. Compared with Co3O4 nano-particles and microsized Co particles, the catalytic effect of Co nanoparticles for AP is stronger. Such effect is attributed to the large specific surface area and its interaction of Co with decomposition intermediate gases. The present work provides useful information for the application of Co nanoparficles in the AP-based propellant.

The catalytic activity of transition metal oxide nanoparticles on thermal decomposition of ammonium perchlorate

The catalytic proficiency of three MONs for AP thermal decomposition was studied in this work.A chemical co-precipitation method was used for synthesis of MONs(CuZnO,CoZnO,and NiZnO)and their characterization carried out by utilizing XRD,FTIR,and SEM.The TGA/DSC technique was employed for the investigation of the catalytic proficiency of MONs on the AP.The DSC data were used for measuring activation energy of catalyzed AP by using Ozawa,Kissinger,and Starink method.The MONs were much sensitive for AP decomposition,and the performance of AP decomposition was further improved.Among all the MONs,the CuZnO exhibits higher catalytic action than others and decomposition temperature of AP is descending around 117℃ by CuZnO.The reduction in the activation energy was noticed after the incorporation of MONs in AP.

Adsorption of Chloride, Nitrate and Perchlorate by Variable Charge Soils

Two cells consisting of a chloride-selective electrode and a nitrate-selective electrode or of a chloride-selective electrode and a perchlorate-selective electrode were directly put in the soil suspension to determine the concentration ratios Cl-/ NO3- or Cl-/ ClO4- for studying the adsorption of the three anions by variable charge soils. It was found that all the concentration ratios CCl- / CNO3- and CCl- / CClO4- in suspension were smaller than unity when soil samples were in equilibrium with mixed KCl and KNO3 or KCl and KClO4 solutions of equal concentration. The order of the amount of chloride, nitrate and perchlorate adsorbed by variable charge soils was Cl-> NO3-> ClO4- when the soils adsorbed these anions from the solution containing equal concentrations of Cl-, NO3- and ClO4-. Such factors as the pH of the suspension, the iron oxide content of the soil etc. could affect the amounts and the ratios of anions adsorbed. The adsorption was chiefly caused by coulombic attraction, but a covalent force between the anion and the metal atom on the surface of soil particles may also be involved, at least for Cl- ions, even for NO3- ions.

Thermal decomposition of ammonium perchlorate catalyzed with CuO nanoparticles

Ammonium perchlorate(APC)is the most common oxidizer in use for solid rocket propulsion systems.However its initial thermal decomposition is an endothermic process that requires 102.5 J·g^-1.This manner involves high activation energy and could render high burning rate regime.This study reports on the sustainable fabrication of CuO nanoparticles as a novel catalyzing agent for APC oxidizer.Colloidal CuO nanoparticles with consistent product quality were fabricated by using hydrothermal processing.TEM micrographs demonstrated mono-dispersed particles of 15 nm particle size.XRD diffractogram demonstrated highly crystalline material.The synthesized colloidal CuO particles were effectively coated with APC particles via co-precipitation by using fast-crash solvent-antisolvent technique.The impact of copper oxide particles on APC thermal behavior has been investigated using DSC and TGA techniques.APC demonstrated an initial endothermic decomposition stage at 242℃ with subsequent two exothermic decomposition stages at 297,8℃ and 452.8℃ respectively.At 1 wt%,copper oxide offered decrease in initial endothermic decomposition stage by 30%.The main outcome of this study is that the two main exothermic decomposition peaks were merged into one single peak with an increase in total heat release by 53%.These novel features can inherit copper oxide particles unique catalyzing ability for advanced highly energetic systems.

Synthesis and physico-chemical properties of new green electrolyte 1-butyl-3-methylimidazolium perchlorate

1-butyl-3-methylimidazolium perchlorate([BMIM]ClO4) was synthesized by two steps with N-methylimidazolium.Some physico-chemical properties,such as density,surface tension,viscosity,electrical conductivity as well as electrochemical window,were investigated and solvent performance was also studied.The results show that this kind of ionic liquid is an excellent electrolyte with low viscosity,high electrical conductivity and wide electrochemical window.In addition,[BMIM]ClO4 is soluble in most conventional solvents and some metal oxides have high solubility in it,which lays the foundation of direct electrolysis of metal oxides in this ionic liquid.

Dracorhodin Perchlorate Suppresses Proliferation and Induces Apoptosis in Human Prostate Cancer Cell Line PC-3

The growth inhibition and pro-apoptosis effects of dracorhodin perchlorate on human prostate cancer PC-3 cell line were examined. After administration of 10-80 μmol/L dracorhodin perchlorate for 12-48 h, cell viability of PC-3 cells was measured by MTT colorimetry. Cell proliferation ability was detected by colony formation assay. Cellular apoptosis was inspected by acridine orange-ethidium bromide fluorescent staining, Hoechst 33258 fluorescent staining, and flow cytometry （FCM） with annexin Ⅴ-FITC/propidium iodide dual staining. The results showed that dracorhodin perchlorate inhibited the growth of PC-3 in a dose- and time-dependent manner. IC50 of dracorhodin perchlorate on PC-3 cells at 24 h was 40.18 μmol/L. Cell clone formation rate was decreased by 86% after treatment with 20 μmol/L of dracorhodin perchlorate. Some cells presented the characteristic apoptotic changes. The cellular apoptotic rates induced by 10-40 μmol/L dracorhodin perchlorate for 24 h were 8.43% to 47.71% respectively. It was concluded that dracorhodin perchlorate significantly inhibited the growth of PC-3 cells by suppressing proliferation and inducing apoptosis of the cells.

A New Nickel(Ⅱ) Coordination Compound Constructed by Pyridyl-triazole and Oxybis(Benzoic Acid): Synthesis,Crystal Structure and the Effect on the Thermal Decomposition of Ammonium Perchlorate

A new energetic complex, Ni（3,4＇-Hbpt）2（Hoba）2（H20）2 （3,4＇-Hbpt = 3-（3-pyridyl）- 5-（4＇-pyridyl）-l-H-l,2,4-triazole and H2oba = 4,4＇-oxybis（benzoic acid））, has been synthesized by hydrothermal reaction and characterized by elemental analysis, IR spectroscopy, single-crystal X-ray diffraction, thermogravimetric analyses and X-ray powder diffraction. Single-crystal X-ray diffraction analysis indicates that the complex belongs to the monoclinic system, space group P2j/c with a = 10.2357（9）, b = 24.594（2）, c = 10.4225（9）/k, β = 114.0110（10）°, V = 2396.7（4） A3, Dc = 1.460 g/cm3,μ = 0.482 mm-1, Mr = 1053.63, F（000） = 1088, Z = 2, the final R = 0.0358 and wR = 0.0973 with I 〉 2σ（I）. Both 3,4＇-Hbpt and H2oba ligands adopt monodentate modes linking one Ni（II） ion to form a 0D motif. Furthermore, the 0D motifs are linked into a 3D supramolecular architecture with hydrogen bonds. In addition, the catalytic performance for thermal decomposition of the efficacy of ammonium perchlorate （AP） is explored by differential scanning calorimetry （DSC）, which indicates that the complex is a good candidate for a promoter of the thermal decomposition of ammonium perchlorate.

Recent progress on transition metal oxides and carbon-supported transition metal oxides as catalysts for thermal decomposition of ammonium perchlorate

As a main oxidizer in solid composite propellants,ammonium perchlorate(AP)plays an important role because its thermal decomposition behavior has a direct influence on the characteristic of solid composite propellants.To improve the performance of solid composite propellant,it is necessary to take measures to modify the thermal decomposition behavior of AP.In recent years,transition metal oxides and carbon-supported transition metal oxides have drawn considerable attention due to their extraordinary catalytic activity.In this review,we highlight strategies to enhance the thermal decomposition of AP by tuning morphology,varying the types of metal ion,and coupling with carbon analogue.The enhanced catalytic performance can be ascribed to synergistic effect,increased surface area,more exposed active sites,and accelerated electron transportation and so on.The mechanism of AP decomposition mixed with catalyst has also been briefly summarized.Finally,a conclusive outlook and possible research directions are suggested to address challenges such as lacking practical application in actual formulation of solid composite propellant and batch manufacturing.

Catalytic Kinetic on the Thermal Decomposition of Ammonium Perchlorate with a New Energetic Complex Based on 3,5-Bis(3-pyridyl)-1H-1,2,4-triazole

A new energetic complex,[Co（3,3？-Hbpt）（Htm）]·H_2O（1,3,3？-Hbpt = 3,5-bis（3-pyridyl）-1H-1,2,4-triazole and H_3tm = trimesic acid）,has been synthesized by hydrothermal reactions and characterized by single-crystal X-ray diffraction,elementary analysis,IR spectroscopy,thermogravimetric analysis and X-ray powder diffraction. Single-crystal X-ray diffraction indicates that the complex belongs to triclinic system,space group P 1 with a = 10.0911（1）,b = 10.2573（1）,c = 10.6393（1） ？,α = 103.793（2）,β = 101.041（2）,γ = 107.918（3）o,V = 974.9（2） ？~3,Z = 2,D_c = 1.732 g·cm-3,μ = 0.941 mm^（-1）,M_r = 508.31,F（000） = 518,the final R = 0.0523 and wR = 0.0935 with I 〉 2σ（I）. In the title complex,Co（Ⅱ） ions are connected by Htm2-anions generating 1D ladder-like chains which are linked by 3,3？-Hbpt to form 1D cages. In addition,the thermal decomposition of ammonium perchlorate（AP） with complex 1 was explored by differential scanning calorimetry（DSC）. AP is completely decomposed in a shorter time in the presence of complex 1,and the decomposition heat of the mixture is 2.531 kJ·g^（-1）,significantly higher than that of pure AP. By Kissinger＇s method,the ratio of Ea/ln（A） is 11.05 for the mixture,which indicates that complex 1 shows good catalytic activity toward the AP decomposition.

Studies on composite solid propellant with tri-modal ammonium perchlorate containing an ultrafine fraction

Composite solid propellant is prepared using tri-modal Ammonium perchlorate(AP)containing coarse,fine and ultrafine fractions of AP with average particle size(APS)340,40 and 5 mm respectively,in various compositions and their rheological,mechanical and burn rate characteristics are evaluated.The optimum combination of AP coarse to fine to ultrafine weight fraction was obtained by testing of series of propellant samples by varying the AP fractions at fixed solid loading.The concentration of aluminium was maintained constant throughout the experiments for ballistics requirement.The propellant formulation prepared using AP with coarse to fine to ultrafine ratio of 67:24:9 has lowest viscosity for the propellant paste and highest tensile strength due to dense packing as supported by the literature.A minimum modulus value was also observed at 9 wt.%of ultrafine AP concentration indicates the maximum solids packing density at this ratio of AP fractions.The burn rate is evaluated at different pressures to obtain pressure exponent.Incorporation of ultrafine fraction of AP in propellant increased burn rate without adversely affecting the pressure exponent.Higher solid loading propellants are prepared by increased AP concentration from 67 to 71 wt.%using AP with coarse to fine to ultrafine ratio of67:24:9.Higher solid content up to 89 wt.%was achieved and hence increased solid motor performance.The unloading viscosity showed a trend with increased AP content and the propellant couldn't able to cast beyond 71 wt.%of AP.Mechanical properties were also studied and from the experiments noticed that%elongation decreased with increased AP content from 67 to 71 wt.%,whereas tensile strength and modulus increased.Burn rate increased with increased AP content and observed that pressure exponent also increased and it is high for the propellant containing with 71 wt.%of AP due to increased oxidiser to fuel ratio.Catalysed composite solid propellant is prepared by using burn rate modifiers Copper chromite and Iron oxide.Addition of Copper chromite and Iron oxide has enhanced the burn rate of tri-modal AP based composite solid propellant.The catalytic propensity of copper chromite is higher than that of iron oxide.The pressure exponent increased with the catalyst concentration and the values obtained are compatible for solid rocket motor applications.

Change of Iodine Load and Thyroid Homeostasis Induced by Ammonium Perchlorate in Rats

Ammonium perchlorate （AP）, mainly used as solid propellants, was reported to interfere with homeostasis via competitive inhibition of iodide uptake. However, detailed mechanisms remain to be elucidated. In this study, AP was administered at 0, 130, 260 and 520 mg/kg every day to 24 male SD rats for 13 weeks. The concentrations of iodine in urine, serum thyroid hormones levels, to- tal iodine, relative iodine and total protein, and malondialdehyde （MDA）, superoxide dismutase （SOD） and catalase （CAT） activity in thyroid tissues were measured, respectively. Our results showed that high-dose perchlorate induced a significant increase in urinary iodine and serum thyroid stimu- lating hormone （TSH）, with a decrease of total iodine and relative iodine content. Meanwhile, free thyroxine （FT4） was decreased and CAT activity was remarkably increased. Particularly, the CAT activity was increased in a dose-dependent manner. These results suggested that CAT might be en- hanced to promote the synthesis of iodine, resulting in elevated urinary iodine level. Furthermore, these findings suggested that iodine in the urine and CAT activity in the thyroid might be used as biomarkers for exposure to AP, associated with thyroid hormone indicators such as TSH. FT4.

Hydrothermal Synthesis of V-Cr-Al-O Nanospheres and Their Effect on Decomposition of Ammonium Perchlorate

V-Cr-Al-O nanospheres were successfully synthesized using V2O5, Al(OH)3, CrO3, and H2C2O4·H2O as the starting materials by a facile one-pot hydrothermal approach. Several techniques containing X-ray powder diffraction, hydrogen temperature programmed reduction, scanning electron microscopy were used to characterize the composition, morphology and redox property of V-Cr-Al-O nanospheres. The catalytic behavior of prepared nanospheres on the thermal decomposition of AP was investigated by the thermogravimetric analysis and differential thermal analysis(TG/DTA). The experimental results show that the thermal decomposition temperature of AP in the presence of V-Cr-Al-O nanospheres is to 395 ℃(decreased by 35 ℃), which proves better catalyst for the thermal decomposition of AP.

Synthesis of N-(3-(Dimethylamino)-2-(4- Ethoxyphenyl) Alllidene)-N-Methylmethana- minium Perchlorate by Willgerodt-Kindler Reaction

Liquid crystals containing phenylpyrimidine units are the fascination condensed state of soft matter with unique electrical, optical and mechanical properties. In this paper, a novel and efficient route was reported for the synthesis of N-（3-（dimethylamino）-2-（4-ethoxyphenyl）allylidene）-N-methylmethanaminium perchlorate by the WillgerodtKindler reaction, which can be further applied to prepare liquid crystals containing phenylpyrimidine units. The product was confirmed by JHNMR, MS, FT-IR and elemental analysis. The experimental conditions of the Willgerodt-Kindler reaction were also studied and the results show that the yield of p-ethoxyphenyl-acetic acid increased remarkably with a reaction time up to 60 rain, then decreased due to carbonization. On the other hand, the yield was also influenced by microwave power. It increased from 20.6 % to 78.8 % with a rise in the microwave power from 250 W to 450 W, but the product was carbonized at 640 W.

Thermochemical Properties of Ternary Complexes of RE Perchlorate with Glycine and Imidazole

The combustion energy has been determined for the nine solid complexes of rare earth perchlorate with glycine and imidazole using a rotatingbomb calorimeter.The standard enthalpy of combustion,H0 -c,coor(s), and standard enthalpy of formation,H0 -f,coor(s), for these complexes have been calculated. From the plot of standard enthalpy of formation versus atomic number of the elements in lanthanide series the tripartite effect regularity was observed and the unknown standard enthalpy of formation for similar complexes,Ce(Gly)4(Im)(ClO4)32H2O and Pm(Gly)4(Im)(ClO4)32H2O,can be estimated according to the figure.

The Thermal Decomposition of Ammonium Perchlorate-Aluminum Propellants in Presence of Metallic Zinc Particles

The thermal decomposition of ammonium perchlorate (AP) with Al and Zn metallic particles was studied at different heating rates in dry air atmosphere and the combustion behavior of AP/Al/Zn propellant was evaluated. The exothermic reaction kinetics was studied by differential thermal analysis (DTA) in non-isothermal conditions and compare with the thermal decomposition of pure AP and AP/aluminum particles analyzed in the same experimental conditions. The Arrhenius parameters were estimated according to the Ozawa and Kissinger methods. The calculated activation energies for the low and high temperature exothermic reactions were 91 and 229 kJ/mol for pure AP, 90 and 112 kJ/mol for 80 wt% AP/20 wt% Al particles. When zinc was incorporated, activation energy of 56 kJ/mol was determined for the only exothermic peak observed for 90 wt% AP/10 wt% Zn and 44 kJ/mol for 78.4 wt% AP/19.6 wt% Al/2 wt% Zn propellant composition.

Photodimerization and photooxygenation of 9-vinylcarbazole catalyzed by titanium dioxide and magnesium perchlorate

Photoreaction of 9-vinylcarbazole in acetonitrile in the presence of titanium dioxide and a catalytic amount of magnesium perchlorate gave 3,6-di(9-carbazolyl)-1,2-dioxane as a photooxygenated product via photodimerization of 9-vinylcarbazole.The photoreaction proceeds via an electron transfer mechanism,where magnesium perchlorate accelerated formation of the photo-oxygenated product.

Salt-Assisted Combustion Synthesis of NdCoO_3 Nanoparticles and Their Catalytic Properties in Thermal Decomposition of Ammonium Perchlorate

Highly dispersed perovskite NdCoO3 nanoparticles were prepared by a novel salt-assisted combustion process. The effects of NaCl content and calcination temperature on the characteristics of the products were characterized by X-Ray Diffraction (XRD), Transmission Electron Microscopy (TEM) and BET surface area measurement. The facile introduction of NaCl in the conventional combustion synthesis process was found to result in the formation of well-dispersed perovskite nanoparticles and increase specific surface areas of the resultants from 1.7 to 43.2 m2·g-1. The catalytic properties of the typical NdCoO3 samples for thermal decomposition of ammonia perchlorate (AP) and their correlation with the NdCoO3 microstructure were investigated by Differential Scanning Calorimetry (DSC). The DSC results indicate that the addition of the amorphous NdCoO3 nanoparticles to AP incorporates two small exothermic peaks of AP into a strong exothermic peak, decreases the temperature of the AP exothermic peak to 314.0 ℃ by reduction of 138.3 ℃ and increases the apparent decomposition heat from 515 J·g-1 to over 1441 J·g-1, showing the intense catalytic activity for thermal decomposition of AP. It is also clear that the catalytic activity of the resultant NdCoO3 is related to their microstructure. According to Kissinger′s method, the kinetics parameters of the thermal decomposition of AP catalyzed by the as-prepared NdCoO3 samples were calculated to account for the order of their catalytic activity.