The melting of crystals is one of the most common and general phase transition phenomena.However, the mechanism of crystal melting is not well understood, and more experimental measurements and explorations are still ...The melting of crystals is one of the most common and general phase transition phenomena.However, the mechanism of crystal melting is not well understood, and more experimental measurements and explorations are still needed.The mechanical spectra of propylene carbonate and 1,3-propanediol during the crystal melting processes are measured by the reed vibration mechanical spectroscopy for liquids(RMS-L) for the first time.The experimental results show that as the temperature increases, the real part of the complex Young modulus first decreases slowly, and then quickly drops to zero;meanwhile, its imaginary part increases slowly at first, then goes up and drops quickly to zero, showing a peak of internal friction.Preliminary analyses indicate that both the real and imaginary parts can present some characteristics of the melting process, such as the transition from the disconnected liquid regions to the connected liquid regions, that from the connected crystal regions to the disconnected crystal regions, and so on.In addition, the results show that the melting rate per unit volume of crystalline phase versus temperature satisfies the Arrhenius relation at the initial stage of melting, and deviates from this relation as the temperature increases to a certain value.Therefore, the RMS-L will provide an effective supplement for the further study of melting.展开更多
The corrosion-induced crystallization of Al94 exNixGd6（x=6 and 10, in at.%） metallic glasses as well as phase separation, oxidation and cracking in good conductivity solution has been investigated by various techniq...The corrosion-induced crystallization of Al94 exNixGd6（x=6 and 10, in at.%） metallic glasses as well as phase separation, oxidation and cracking in good conductivity solution has been investigated by various techniques.The transmission electronic microscopy（TEM） result reveals that crystalline intermetallics and oxides present on the electrochemically thinned hole edge, and the phase separation occurs in the matrix of the as-spun ribbons with the circumferential speed Rcof 29.3 m/s. In addition, the bending and cracking of the samples occur after corrosion. The influence of Ni content on the phase separation, bending and cracking can be explained by the fact that the percolation of the backbone clusters in the amorphous alloy melts and glasses is enhanced by increasing the composition of Ni.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.11664042)
文摘The melting of crystals is one of the most common and general phase transition phenomena.However, the mechanism of crystal melting is not well understood, and more experimental measurements and explorations are still needed.The mechanical spectra of propylene carbonate and 1,3-propanediol during the crystal melting processes are measured by the reed vibration mechanical spectroscopy for liquids(RMS-L) for the first time.The experimental results show that as the temperature increases, the real part of the complex Young modulus first decreases slowly, and then quickly drops to zero;meanwhile, its imaginary part increases slowly at first, then goes up and drops quickly to zero, showing a peak of internal friction.Preliminary analyses indicate that both the real and imaginary parts can present some characteristics of the melting process, such as the transition from the disconnected liquid regions to the connected liquid regions, that from the connected crystal regions to the disconnected crystal regions, and so on.In addition, the results show that the melting rate per unit volume of crystalline phase versus temperature satisfies the Arrhenius relation at the initial stage of melting, and deviates from this relation as the temperature increases to a certain value.Therefore, the RMS-L will provide an effective supplement for the further study of melting.
基金financially supported by the National Natural Science Foundation of China (No. 51171091, 51471099)the Excellent Youth Project of Shandong Natural Science Foundation (No. JQ201012)the National Basic Research Program of China ("973 Program", No. 2012CB825702)
文摘The corrosion-induced crystallization of Al94 exNixGd6（x=6 and 10, in at.%） metallic glasses as well as phase separation, oxidation and cracking in good conductivity solution has been investigated by various techniques.The transmission electronic microscopy（TEM） result reveals that crystalline intermetallics and oxides present on the electrochemically thinned hole edge, and the phase separation occurs in the matrix of the as-spun ribbons with the circumferential speed Rcof 29.3 m/s. In addition, the bending and cracking of the samples occur after corrosion. The influence of Ni content on the phase separation, bending and cracking can be explained by the fact that the percolation of the backbone clusters in the amorphous alloy melts and glasses is enhanced by increasing the composition of Ni.
