Wave Diffraction on Arc-Shaped Floating Perforated Breakwaters

An analytical method is developed to study the sheltering effects on arc-shaped floating perforated breakwaters. In the process of analysis, the tloating breakwater is assumed to be rigid, thin, vertical, and immovable and located in water with constant depth. The fluid domain is divided into two regions by imaginary interface. The velocity potential in each region is expanded by eigenfunction in the context of linear theory. By satisfying continuity of pressure and normal velocity across the imaginary fluid interface, a set of linear algebraic equations can be obtained to determine the unknown coefficients for eigenfunction expansions. The accuracy of the present model was verified by a comparison with existing results for the case of arc-shaped floating breakwater. Numerical results, in the form of contour maps of the non-dimensional wave amplitude around the breakwater and diffracted wave amplitude at typical sections, are presented for a range of wave and breakwater parameters. Results show that the sheltering effects on the arc-shaped floating perforated breakwater are closely related to the incident wavelength, the draft and the porosity of the breakwater.

Wave interaction with a new type perforated breakwater

In this study examined is the wave interaction with a new modified perforated breakwater, consisting of a perforated front wall, a solid back wall and a wave absorbing chamber between them with a two-layer rock-filled core. The fluid domain is divided into three sub-domains according to the components of the breakwater. Then by means of the matched eigenfunction expansion method, an analytical solution is obtained to assess the hydrodynamic performance of the new structure. An approach based on a step approach method is introduced to solve the complex dispersion equations for water wave motions within two-layer porous media. Numerical results of the present model are compared with previous limiting cases. The effects of rock fill on the reflec- tion coefficient and the horizontal wave force are discussed.

Wave Interactions with Multiple Semi-Immersed Jarlan-Type Perforated Breakwaters

This study examines wave interactions with multiple semi-immersed Jarlan-type perforated breakwaters. A numerical model based on linear wave theory and an eigenfunction expansion method has been developed to study the hydrodynamic characteristics of breakwaters. The numerical results show a good agreement with previous analytical results and experimental data for limiting cases of double partially immersed impermeable walls and double and triple Jarlan-type breakwaters. The wave transmission coefficient Cv; reflection coefficient CR, and energy dissipation coefficient CE coefficients and the horizontal wave force exerted on the front and rear walls are examined. The results show that CR reaches the maximum value when B/L = 0.46n while it is smallest when B/L=0.46n＋0.24 （n=0, 1, 2,...）. An economical triple semi-immersed Jarlan-type perforated breakwater can be designed with B/L = 0.25 and CR and CT ranging from 0.25 to 0.32 by choosing a relative draft d/h of 0.35 and a permeability parameter of the perforated front walls being 0.5 for an incident wave number kh nearly equal to 2.0. The triple semi-immersed Jarlan-type perforated breakwaters with significantly reduced CR, will enhance the structure＇s wave absorption ability, and lead to smaller wave forces compared with the double one. The proposed model may be used to predict the response of a structure in the preliminary design stage for practical engineering.

Analytical Research on Wave Diffraction on Arc-Shaped Bottom-Mounted Perforated Breakwaters

An analytical method is developed to study wave diffraction on arc-shaped and bottom-mounted perforated breakwaters. The breakwater is assumed to be rigid, thin, vertical, immovable and located in water of constant depth. The fluid domain is divided into two regions by imaginary interface. The velocity potential in each region is expanded by eigenfunctions. By satisfying the continuity of pressure and normal velocity across the imaginary fluid interface, a set of linear algebraic equations can be obtained to determine the unknown coefficients of eigenfunctions. Numerical results, in the form of contour maps of the relative wave amplitude around the breakwater, are presented for a range of wave and breakwater parameters. Results show that the wave diffraction on the arc-shaped and bottom-mounted perforated breakwater is related to the incident wavelength and the porosity of the breakwater. The porosity of the perforated breakwater may have great effect on the diffracted field.

Experimental Study of Dissolved Oxygen Transport by Regular Waves Through a Perforated Breakwater

The perforated breakwater is an environmentally friendly coastal structure, and dissolved oxygen concentration levels are an important index to denote water quality. In this paper, oxygen transport experiments with regular waves through a vertical perforated breakwater were conducted. The oxygen scavenger method was used to reduce the dissolved oxygen concentration of inner water body with the chemicals Na2SO3 and COC12. The dissolved oxygen concentration and wave parameters of 36 experimental scenarios were measured with different perforated arrangements and wave conditions. It was found that the oxygen transfer coefficient through wave surface, K1α1, is much lower than the oxygen transport coefficient through the perforated breakwater, K2α2. If the effect of K1α1 is not considered, the dissolved oxygen concentration computation for inner water body will not be greatly affected. Considering the effect of a permeable area ratio a, relative location parameter of perforations 6 and wave period T, the aforementioned data of 30 experimental scenarios, the dimensional analysis and the least squares method were used to derive an equation of K2α2 （K2α2=0.0042aσ56δ2T1）. It was validated with 6 other experimental scenarios data, which indicates an approximate agreement. Therefore, this equation can be used to compute the DO concentration caused by the water transport through perforated breakwater.

Reflection of Oblique Incident Waves by Breakwaters with Partially-Perforated Wall

The reflection of oblique incident waves from breakwaters with a partially-perforated front wall is investigated. The fluid domain is divided into two sub-domains and the eigenfunction expansion method is applied to expand velocity potentials in each domain. In the eigen-expansion of the velocity potential, evanescent waves are included. Numerical results of the present model are compared with experimental data. The effect of porosity, the relative chamber width, the relative water depth in the wave absorbing chamber and the water depth in front of the structure are discussed.

Calculation of Wave Pressure and Pressure Spectrum for Perforated-Pipe Breakwater

Standing waves are formed due to the reflection when waves meet vertical wall, therefore strong structures are needed to keep the wall stability under the serious wave attack. For the improvement of the working condition and increase of the stability of the wall, the lower reflecting breakwaters have attracted close attention Reports mostly from Japanese researchers are often concerned with the wall of caisson equipped with open windows. In this paper a kind of hollow-pipe perforated breakwater is examined which waves may partially perforate into the harbour basin. The wave in front of the wall can only form partial standing wave and wave force is reduced obviously. And the theoretical calculation of wave force and analysis of wave force spectrum are all derived. Comparison between the results from theoretical calculation and hydraulic modeling shows reasonable agreement.

Calculation of Wave Reflection Coefficient for Perforated-Pipe Breakwater

The hollow-pipe perforated breakwater is of low reflection. In this paper the functions of reflection coefficients of both regular and random waves are theoretically derived, based on the concept of linear superimposition of reflected and incident waves and with the total flow rate continuity of integral form instead of the non-continuity of the boundary condition, and based on the concept of linear wave spectrum theory. Comparisons between theoretical results presented here and measurements of model tests show reasonable agreement.

Scattering of Water Waves by Dual Symmetric Inclined Floating Porous Barriers Using the DBEM

The scattering of normally incident water waves by two surface-piercing inclined perforated barriers in water with a uniform finite depth is investigated within the framework of linear water wave theory.Considering that thin barriers are zero-thickness,a novel numerical method involving the the coupling of the dual boundary element method(DBEM)with damping layers is applied.In order to effectively damp out the reflected waves,two damping layers,instead of pseudoboundaries are implemented near the two side boundaries of the computational domain.Thus,the modified linearized free surface boundary conditions are formulated and used for solving both the ordinary boundary integral equation as well as the hypersingular boundary integral equation for degenerate boundaries.The newly developed numerical method is validated against analytical methods using the matched eigenfunction expansion method for the special case of two vertical barriers or the inclined angle to the vertical being zero.The influence of the length of the two damping layers has been discussed.Moreover,these findings are also validated against previous results for several cases.After validation,the numerical results for the reflection coefficient,transmission coefficient and dissipation coefficient are obtained by varying the inclination angle and porosity-effect parameter.The effects of both the inclination angle and the porosity on the amplitudes of wave forces acting on both the front and rear barriers are also investigated.It is found that the effect of the inclination angle mainly shifts the location of the extremal values of the reflection and the transmission coefficients.Additionally,a moderate value of the porosity-parameter is quite effective at dissipating wave energy and mitigating the wave loads on dual barriers.

Study on the Breakwater Caisson as Oscillating Water Column Facility

The Oscillating Water Column(OWC) wave energy convertor with the advantage of its simple geometrical construction and excellent stability is widely employed.Recently,perforated breakwaters have been often used as they can effectively reduce the wave reflection from and wave forces acting on the structures.Considering the similarity between the compartment of perforated caisson and the air chamber of OWC wave energy convertor,a new perforated caisson of breakwater is designed in this paper.The ordinary caisson is modified by installing facilities similar to the air chamber of OWC converter,but here they are utilized to dissipate the wave energy inside the caisson.Such an arrangement improves the stability of the caisson and reduces the construction cost by using the compartment of perforated caisson like using an air chamber.This innovation has both academic significance and important engineering value.For a new type of caisson,reliability analysis of the structure is necessary.Linear potential flow theory is applied to calculate the horizontal wave force acting on the caisson.The calculated results are compared with experimental data,showing the feasibility of the method.The Importance Sampling Procedure(ISP) is used to analyse the reliability of this caisson breakwater.