Performance-based seismic design of nonstructural building components:The next frontier of earthquake engineering

With the development and implementation of performance-based earthquake engineering,harmonization of performance levels between structural and nonstructural components becomes vital. Even if the structural components of a building achieve a continuous or immediate occupancy performance level after a seismic event,failure of architectural,mechanical or electrical components can lower the performance level of the entire building system. This reduction in performance caused by the vulnerability of nonstructural components has been observed during recent earthquakes worldwide. Moreover,nonstructural damage has limited the functionality of critical facilities,such as hospitals,following major seismic events. The investment in nonstructural components and building contents is far greater than that of structural components and framing. Therefore,it is not surprising that in many past earthquakes,losses from damage to nonstructural components have exceeded losses from structural damage. Furthermore,the failure of nonstructural components can become a safety hazard or can hamper the safe movement of occupants evacuating buildings,or of rescue workers entering buildings. In comparison to structural components and systems,there is relatively limited information on the seismic design of nonstructural components. Basic research work in this area has been sparse,and the available codes and guidelines are usually,for the most part,based on past experiences,engineering judgment and intuition,rather than on objective experimental and analytical results. Often,design engineers are forced to start almost from square one after each earthquake event: to observe what went wrong and to try to prevent repetitions. This is a consequence of the empirical nature of current seismic regulations and guidelines for nonstructural components. This review paper summarizes current knowledge on the seismic design and analysis of nonstructural building components,identifying major knowledge gaps that will need to be filled by future research. Furthermore,considering recent trends in earthquake engineering,the paper explores how performance-based seismic design might be conceived for nonstructural components,drawing on recent developments made in the field of seismic design and hinting at the specific considerations required for nonstructural components.

Peak displacement patterns for the performance-based seismic design of steel eccentrically braced frames

Performance-based seismic design(PBSD) aims to assess structures at different damage states. Since damage can be directly associated to displacements, seismic design with consideration of displacement seems to be logical. In this study, simple formulae to estimate the peak floor displacement patterns of eccentrically braced frames(EBFs) at different performance levels subjected to earthquake ground motions are proposed. These formulae are applicable in a PBSD and especially in direct displacement-based design(DDBD). Parametric study is conducted on a group of 30 EBFs under a set of 15 far field and near field accelerograms which they scaled to different amplitudes to adapt various performance levels. The results of thousands of nonlinear dynamic analyses of EBFs have been post-processed by nonlinear regression analysis in order to recognize the major parameters that influence the peak displacement pattern of these frames. Results show that suggested displacement patterns have relatively good agreement with those acquired by an exact nonlinear dynamic analysis.

Design,preparation,application of advanced array structured materials and their action mechanism analyses for high performance lithium-sulfur batteries

Lithium-sulfur battery(LSB)has brought much attention and concern because of high theoretical specific capacity and energy density as one of main competitors for next-generation energy storage systems.The widely commercial application and development of LSB is mainly hindered by serious“shuttle effect”of lithium polysulfides(Li PSs),slow reaction kinetics,notorious lithium dendrites,etc.In various structures of LSB materials,array structured materials,possessing the composition of ordered micro units with the same or similar characteristics of each unit,present excellent application potential for various secondary cells due to some merits such as immobilization of active substances,high specific surface area,appropriate pore sizes,easy modification of functional material surface,accommodated huge volume change,enough facilitated transportation for electrons/lithium ions,and special functional groups strongly adsorbing Li PSs.Thus many novel array structured materials are applied to battery for tackling thorny problems mentioned above.In this review,recent progresses and developments on array structured materials applied in LSBs including preparation ways,collaborative structural designs based on array structures,and action mechanism analyses in improving electrochemical performance and safety are summarized.Meanwhile,we also have detailed discussion for array structured materials in LSBs and constructed the structure-function relationships between array structured materials and battery performances.Lastly,some directions and prospects about preparation ways,functional modifications,and practical applications of array structured materials in LSBs are generalized.We hope the review can attract more researchers'attention and bring more studying on array structured materials for other secondary batteries including LSB.

Probabilistic Performance-Based Optimum Seismic Design Framework: Illustration and Validation

In the field of earthquake engineering,the advent of the performance-based design philosophy,together with the highly uncertain nature of earthquake ground excitations to structures,has brought probabilistic performance-based design to the forefront of seismic design.In order to design structures that explicitly satisfy probabilistic performance criteria,a probabilistic performance-based optimum seismic design(PPBOSD)framework is proposed in this paper by extending the state-of-the-art performance-based earthquake engineering(PBEE)methodology.PBEE is traditionally used for risk evaluation of existing or newly designed structural systems,thus referred to herein as forward PBEE analysis.In contrast,its use for design purposes is limited because design is essentially a more challenging inverse problem.To address this challenge,a decision-making layer is wrapped around the forward PBEE analysis procedure for computer-aided optimum structural design/retrofit accounting for various sources of uncertainty.In this paper,the framework is illustrated and validated using a proof-of-concept problem,namely tuning a simplified nonlinear inelastic single-degreeof-freedom(SDOF)model of a bridge to achieve a target probabilistic loss hazard curve.For this purpose,first the forward PBEE analysis is presented in conjunction with the multilayer Monte Carlo simulation method to estimate the total loss hazard curve efficiently,followed by a sensitivity study to investigate the effects of system(design)parameters on the probabilistic seismic performance of the bridge.The proposed PPBOSD framework is validated by successfully tuning the system parameters of the structure rated for a target probabilistic seismic loss hazard curve.The PPBOSD framework provides a tool that is essential to develop,calibrate and validate simplified probabilistic performance-based design procedures.

Optimization for performance-based design under seismic demands, including social costs

Performance-based design in earthquake engineering is a structural optimization problem that has, as the objective, the determination of design parameters for the minimization of total costs, while at the same time satisfying minimum reliability levels for the specifi ed performance criteria. Total costs include those for construction and structural damage repairs, those associated with non-structural components and the social costs of economic losses, injuries and fatalities. This paper presents a general framework to approach this problem, using a numerical optimization strategy and incorporating the use of neural networks for the evaluation of dynamic responses and the reliability levels achieved for a given set of design parameters. The strategy is applied to an example of a three-story offi ce building. The results show the importance of considering the social costs, and the optimum failure probabilities when minimum reliability constraints are not taken into account.

Research on performance-based seismic design criteria

The seismic design criterion adopted in the existing seismic design codes is reviewed. It is pointed out that the presently used seismic design criterion is not satisfied with the requirements of nowadays social and economic development. A new performance-based seismic design criterion that is composed of three components is presented in this paper. It can not only effectively control the economic losses and casualty, but also ensure the building's function in proper operation during earthquakes. The three components are: classification of seismic design for buildings, determination of seismic design intensity and/or seismic design ground motion for controlling seismic economic losses and casualties, and determination of the importance factors in terms of service periods of buildings. For controlling the seismic human losses, the idea of socially acceptable casualty level is presented and the 'Optimal Economic Decision Model' and 'Optimal Safe Decision Model' are established. Finally, a new method is recommended for calculating the importance factors of structures by adjusting structures service period on the base of more important structure with longer service period than the conventional ones. Therefore, the more important structure with longer service periods will be designed for higher seismic loads, in case the exceedance probability of seismic hazard in different service period is same.

Optimal Design of Stewart Platform Safety Mechanism

A safety mechanism capable of moving at will within the range of its whole link lengths is designed based on the link space. Sixteen extreme poses are obtained in a Stewart platform. The singular points of the extreme poses are solved by using homotopy method as well as the judgment condition of singular points, and thereby the maximum link lengths are achieved. The rotation angles of joints and the distances between two neighboring links are analyzed in a calculation example in which that the mechanism moves among the extreme poses is assumed. Then an algorithm to test the safety mechanism is presented taking the constraint conditions into account. A safety mechanism having optimal properties of global movement is worked out by optimizing all structural parameters through minimizing the average condition number of extreme poses.

Impact of Improving Design Factor over 0.72 on the Safety and Reliability of Gas Pipelines and Feasibility Justification

Many years experience of the operation of high stress (>72% specified minimum yield strength, SMYS) gas pipelines and statistical analysis results of pipeline incidents showed that the operating pipelines at stress levels over 72% SMYS have not presented problems in USA and Canada, and design factor does not control incidents or the safety of pipelines. Enhancing pipeline safety management level is most important for decreasing incident rate. The application history of higher design factors in the U.S and Canada was reviewed. And the effect of higher factors to the critical flaw size, puncture resistance, change of reliability with time, risk level and the arrest toughness requirements of pipeline were analyzed here. The comparison of pipeline failure rates and risk levels between two design factors (0.72 and 0.8) has shown that a change in design factor from 0.72 to 0.8 would bring little effect on failure rates and risk levels. On the basis of the analysis result, the application feasibility of design factor of 0.8 in China was discussed and the related suggestions were proposed. When an operator wishes to apply design factor 0.8 to gas pipeline, the following process is recommended: stress level of line pipe hydro test should be up to 100% SMYS, reliability and risk assessment at the design feasibility or conceptual stage should be conducted, Charpy impact energy should meet the need of pipeline crack arrest; and establish and execute risk based integrity management plan. The technology of pipeline steel metallurgy, line pipe fabrication and pipeline construction, and line pipe quality control level in China achieved tremendous progresses, and line pipe product standards and property indexes have come up to international advanced level. Furthermore, pipeline safety management has improved greatly in China. Consequently, the research for the feasibility of application of design factor of 0.8 in China has fundamental basis.

Performance-based global reliability assessment of a high-rise frame-core tube structure subjected to multi-dimensional stochastic earthquakes

When evaluating the seismic safety and reliability of complex engineering structures,it is a critical problem to reasonably consider the randomness and multi-dimensional nature of ground motions.To this end,a proposed modeling strategy of multi-dimensional stochastic earthquakes is addressed in this study.This improved seismic model has several merits that enable it to better provide seismic analyses of structures.Specifically,at first,the ground motion model is compatible with the design response spectrum.Secondly,the evolutionary power spectrum involved in the model and the design response spectrum are constructed accordingly with sufficient consideration of the correlation between different seismic components.Thirdly,the random function-based dimension-reduction representation is applied,by which seismic modeling is established,with three elementary random variables.Numerical simulations of multi-dimensional stochastic ground motions in a specific design scenario indicate the effectiveness of the proposed modeling strategy.Moreover,the multi-dimensional seismic response and the global reliability of a high-rise frame-core tube structure is discussed in detail to further illustrate the engineering applicability of the proposed method.The analytical investigations demonstrate that the suggested stochastic model of multi-dimensional ground motion is available for accurate seismic response analysis and dynamic reliability assessment of complex engineering structures for performance-based seismic resistance design.

Influential Factors in Safety Design of Aircraft Pneumatic Duct System

The reliability and safety of the pneumatic ducts are essential for flight safety.A beam element model of the duct system is developed and the factors that impact the stress performance of the duct system are investigated,such as stress check standards,flight acceleration,internal temperature and internal pressure.The results show that the stress synthetic method as the stress check standard can obtain the more safety design results.The maximum stress of straight pipe is affected significantly by the acceleration in a plane perpendicular to straight pipe,while the maximum stress of bend pipe is greatly affected by the acceleration in the direction perpendicular to plane of the bend pipe.Meanwhile,internal pressure has little effect on the maximum stress of bend pipe and straight pipe.Temperature has little effect on the maximum stress of bend pipe while has a big impact on the maximum stress of straight pipe.

Design methodology for the safety of underground rock engineering

In order to optimise the safety of underground rock engineering construction and the long-term security of the resultant facilities, it is necessary to have a knowledge of the likely hazards. These risks or hazards fall into the four categories of 'known beforehand and relatively easily addressed', 'known beforehand and not easily addressed', 'not known beforehand and relatively easily addressed', and 'not known beforehand and not easily addressed'. This paper describes how these four types of hazard can be incorporated into a design methodology approach, including the process by which the relevant mechanical rock mass parameters can be recognised for modelling and hence predictive purposes. In particular, there is emphasis on the fact that information and judgement are the keys to safety——whether the hazards are known or unknown before construction proceeds.

Highway Planning and Design in the Qinghai–Tibet Plateau of China: A Cost–Safety Balance Perspective

Engineering designs for mountainous highways emphasize compliance checking to ensure safety. However, relying solely on compliance checking may lead designers to minimize costs at the expense of high risk indicators, since the overall risk level of the highway design is unknown to the designers. This paper describes a method for the simultaneous consideration of traffic safety risks and the associated cost burden related to the appropriate planning and design of a mountainous highway. The method can be carried out in four steps: First, the highway design is represented by a new parametric framework to extract the key design variables that affect not only the life-cycle cost but also the operational safety. Second, the relationship between the life-cycle cost and the operational safety risk factors is established in the cost-estimation functions. Third, a fault tree analysis (FTA) is introduced to identify the traffic risk factors from the design variables. The safety performance of the design solutions is also assessed by the generalized linear-regression model. Fourth, a theory of acceptable risk analysis is introduced to the traffic safety assessment, and a computing algorithm is proposed to solve for a cost-efficient optimal solution within the range of acceptable risk, in order to help decision-makers. This approach was applied and examined in the Sichuan–Tibet Highway engineering project, which is located in a complex area with a large elevation gradient and a wide range of mountains. The experimental results show that the proposed approach significantly improved both the safety and cost performance of the project in the study area.

Modular Design Using Sustainable Luminescent Materials in Energy-Saving Reflective Cat’s Eyes for Public Road Safety Planning

Recently,there has been a global movement toward environmental protection and energy conservation through the design and development of new products in accordance with sustainable utilisation.In this study,rare earth luminescent materials were used owing to their active light emission and reusability.Additionally,solar lightemitting diode lights and car-light reflection were utilised to increase the recognition and reliability of reflective cat eyes.Along with carbon reduction,this can save energy and enhance road safety.This study considered the Theory of Inventive Problem Solving and a literature review to analyse the issues in existing products.Then,expert interviews were conducted to screen projects and develop product design policies.Finally,the ratio of light-storage materials was experimentally determined and the prototypes implemented.This cat’s eye addresses the shortcomings identified in previous analyses of existing products.We applied energy storage environmental protection materials,together with material proportioning(which balanced warning efficiency against cost-effectiveness)to develop diversified modular kits;these were flexible in terms of quantity and easily assembled.This study achieved four key objectives:(1)reducing the research and development costs of the manufacturer;(2)offering buyers a diverse suite of products;(3)responding to a need to improve diverse road user safety;and(4)reducing government procurement costs for safety warning products.The results provide a reference for the creative modular design of energy-saving products for public road safety planning in various industries.

Development of Performance-Based Tunnel Evaluation Methodology and Performance Evaluation of Existing Railway Tunnels

The concept of performance-based design, which mainly focuses on mechanical performance, has become the international standard, as in the case for ISO. The standardization of tunnel design has not been achieved because it requires integration of separate specialized fields, such as geotechnical engineering, structural engineering and concrete engineering. It is also required to clarify performance-based criteria for tunnel structures to suit specific use purposes (objectives), establish the concept of survey, planning, design, construction and maintenance based on such criteria, and develop proper management systems for operation and maintenance to suit specific tunnel use purposes. To this end, it is vital to develop a methodology for evaluating and verifying the performance of existing tunnels. This paper presents a new concept of performance requirements for tunnel structures and describes the method of quantitatively evaluating the total performance of existing tunnels in relation to the required performance, assuming the total performance to be based on the Analysis Hierarchy Process.

Open-Type Ferry Safety System Design for Using LNG Fuel

在这可行性研究，我们调查使用在一条开的类型 Ro-Ro 旅客渡船和联系潜力的燃料关于容器安全系统质问的液化天然气(LNG ) 的生存能力。我们为变换存在轮船在 LNG 燃料上跑推荐适当方法论，讨论所有必要修正到轮船安全系统，并且也评估相关轮船撤退过程。我们构画出轮船已经为必须为 LNG 的使用被考虑的另外的限制造成的每个安全系统和分析与应允的基本要求。适当行动被推荐。而且，我们执行危险鉴定研究。总的来说，我们清楚地表明调查情形的技术可行性。到轮船安全系统的最小的修正被要求为轮船的这种特定的类型遵循存在安全规则。

The Design of Urban Road Manhole Covers Based on the Function of Safety and Identification

This study combed the development process of urban road manhole cover at home and abroad,and pointed out the existing problems in the domestic manhole cover.From the perspective of safety and identification function,it put forward innovative design ideas of urban road manhole covers to improve the safety and identification function of road manhole covers,and enhance the ornamental of manhole covers.

Safety Design Strategy for Highway Interchange Exit Ramp

Highway is an important type of road in China’s road network,and it also carries a larger portion of transportation task.Safety is the first indicator in the stage of its use,so it is necessary to carry out safety design focusing on the highway interchange exit ramp to effectively prevent traffic accidents.Therefore,in this paper,the important significance of the safety design of the highway interchange exit ramp and the key factors affecting its safety were discussed and studied in detail,and finally corresponding strategies were proposed for discussion and communication.

Analysis on Safety Influencing Factors on Highway Interchange Design

This paper briefly introduces the safety performance of the highway interchange design.The factors that influence the safety of the highway interchange design,was discussed in the paper based on the parts,which are the safety of the interchange location,the safety of interchange form,and the safety design of the main line in interchange.

Analysis of the Relations between Highway Geometric Design and Traffic Safety in Bangladesh,China,and America

Transportation plays a critical role in the economic sector in Bangladesh.Since its independence,infrastructure has been developing rapidly,includ-ing land,water,and air transportation.National economy is increasing at a relatively high rate,leading to the better-off of people’s lives.As the living standards keep improving,people are more concerned about safety issues in transportation.This article makes an analysis of the status quo of traffic safety in Bangladesh and compares the Bangladeshi code with American code AASHTO from the geometric aspects of horizontal and vertical align-ment,in an effort to provide reference to the highway design in Bangla-desh.Through a reasonable design,the traffic safety will be under control and accident rate as well as economic loss will be minimized.

The Human-Machine Safety Design of Mechanical Toys for Children

In order to ensure the safety of children while using machineries and avoid harm caused by mechanical toys,this paper analyzes the types and detection standards of children’s toys,discusses the reasons for the harm caused by these toys,and proposes human-machine safety design strategies for children’s toys as reference.