Effect of Sinusoidal Heating on Natural Convection Coupled to Thermal Radiation in a Square Cavity Subjected to Cross Temperature Gradients

Coupled natural convection and surface radiation within a square cavity, filled with air and submitted to discrete heating and cooling from all its walls, is studied numerically. The thermally active elements are centrally located on the walls of the cavity. Two heating modes, called SB and SV, are considered. They correspond to bottom and vertical left elements sinusoidally heated in time, respectively, while the top and vertical right ones are constantly cooled. The remaining portions of all the walls are considered adiabatic. The parameters governing the problem are the amplitude and the period of the temporally sinusoidal temperature, the emissivity of the walls , the relative lengths of the active elements and the Rayleigh number . The effect of such parameters on flow and thermal fields and the resulting heat transfer is examined. It is shown that, during a flow cycle, the flow structure can present complex behavior, depending on the emissivity and the amplitude and period of the exciting temperature. The rate of heat transfer is generally enhanced in the case of sinusoidal heating. Also, the resonance phenomenon existence, characterized by maximum fluctuations in flow intensity and heat transfer, is proved in this study.

Novel Coil Winding Method to Realize Pot Heated Evenly

To solve the problem about the inhomogeneous thermal effect of pot heated by coils along the circumference, a novel coil winding method is proposed and compared with the general winding method in the paper. First, based on the Biot-Savart law and Ampere＇s rule, the magnetic induction generated by a straight current carrying conductor and a current loop is discussed, respectively. Then the novel coil winding method is developed by adjusting the location of inhomogeneous joints. The joints are periodically scattered along the circumferential direction and symmetrically designed around the central axis.Numerical results show that the quite non-uniform temperature in the base of pot at the circular direction is effectively improved by using the proposed winding method. The potential danger produced by high temperature at some region of coils plate is minimized.It is energy-efficient and safe for residential appliances.

Chemical characteristics and source apportionment of atmospheric particles during heating period in Harbin, China

Atmospheric particles（total suspended particles（TSPs）; particulate matter（PM） with particle size below 10 μm, PM10; particulate matter with particle size below 2.5 μm, PM2.5）were collected and analyzed during heating and non-heating periods in Harbin. The sources of PM10 and PM2.5were identified by the chemical mass balance（CMB） receptor model.Results indicated that PM2.5/TSP was the most prevalent and PM2.5was the main component of PM210, while the presence of PM10–100was relatively weak. SO-4and NO-3concentrations were more significant than other ions during the heating period. As compared with the non-heating period, Mn, Ni, Pb, S, Si, Ti, Zn, As, Ba, Cd, Cr, Fe and K were relatively higher during the heating period. In particular, Mn, Ni, S, Si, Ti, Zn and As in PM2.5were obviously higher during the heating period. Organic carbon（OC） in the heating period was 2–5 times higher than in the non-heating period. Elemental carbon（EC） did not change much. OC/EC ratios were 8–11 during the heating period, which was much higher than in other Chinese cities（OC/EC： 4–6）. Results from the CMB indicated that 11 pollution sources were identified, of which traffic, coal combustion, secondary sulfate, secondary nitrate, and secondary organic carbon made the greatest contribution. Before the heating period, dust and petrochemical industry made a larger contribution. In the heating period, coal combustion and secondary sulfate were higher. After the heating period, dust and petrochemical industry were higher. Some hazardous components in PM2.5were higher than in PM10, because PM2.5has a higher ability to absorb toxic substances. Thus PM2.5pollution is more significant regarding human health effects in the heating period.

CHARACTERISTICS OF THE SURFACE AND ATMOSPHERIC HEATING FIELDS OVER QINGHAI-XIZANG PLATEAU FOR THE PERIOD FROM AUGUST 1982 TO JULY 1983

The surface and atmospheric heating fields over the Qinghai-Xizang Plateau are computed by using the observational data of solar radiation during 1982—1983.The mian results are as follows:The central and northern parts of the Plateau act as heat sinks in winter from November to January.Both eastern and south- ern parts of the Plateau are of heat sources.In summer,the main part of the Plateau acts as a strong heat source,and the center of the heating field is in the southeastern Plateau.However the main part of the Plateau acts as a heat sink for the atmospheric heating fields from October to March.The maximum intensity of the atmospheric heat sink over the central Plateau appears in December and January.From April to September,the main part of the Plateau acts as a heat source for the atmospheric heating fields.