Projected Changes in Semi Permanent Systems of Indian Summer Monsoon in CORDEX-SA Framework

The semi-permanent systems such as Seasonal Heat Low (HL), Monsoon Trough (MT), Tibetan Anticyclone (TA), Tropical Easterly Jet (TEJ) and Low Level Jet (LLJ) or Somali jet are observed over Indian region during Indian summer monsoon season (June through September). These systems play a vital role in defining the strength of the Indian summer monsoon rainfall as a whole. Here we evaluate the ability of Consortium for Small-Scale Modeling (COSMO) regional Climate Model (COSMO-CLM), a high resolution regional climate model within the Coordinated Regional Climate Downscaling Experiment for South Asia (CORDEX-SA) framework, to simulate these systems of Indian summer monsoon. The historical runs of the COSMO-CLM for the period 1951-2000 are analysed. Overall the COSMO-CLM is able to simulate these components reasonably well. Possible changes in the position and the strength of these systems and their role in changing rainfall pattern over India are examined to assess the impact of global warming, under the RCP 4.5 simulations towards the end of the century (2051-2100). The analysis shows that the semi permanent systems may not strengthen in the future as compared to the present climate. The summer monsoon rainfall does not show uniform changes over the region. It is likely to enhance over the southern parts of the country, south of 20?S while it is projected to decrease in the northern parts under the global warming scenario.

Disturbances rejection optimization based on improved two-degree-of-freedom LADRC for permanent magnet synchronous motor systems

Permanent magnet synchronous motor(PMSM)speed control systems with conventional linear active disturbance rejection control(CLADRC)strategy encounter issues regarding the coupling between dynamic response and disturbance suppression and have poor performance in suppressing complex nonlinear disturbances.In order to address these issues,this paper proposes an improved two-degree-of-freedom LADRC(TDOF-LADRC)strategy,which can enhance the disturbance rejection performance of the system while decoupling entirely the system's dynamic and anti-disturbance performance to boost the system robustness and simplify controller parameter tuning.PMSM models that consider total disturbances are developed to design the TDOF-LADRC speed controller accurately.Moreover,to evaluate the control performance of the TDOF-LADRC strategy,its stability is proven,and the influence of each controller parameter on the system control performance is analyzed.Based on it,a comparison is made between the disturbance observation ability and anti-disturbance performance of TDOF-LADRC and CLADRC to prove the superiority of TDOF-LADRC in rejecting disturbances.Finally,experiments are performed on a 750 W PMSM experimental platform,and the results demonstrate that the proposed TDOF-LADRC exhibits the properties of two degrees of freedom and improves the disturbance rejection performance of the PMSM system.

Direct Torque Control System and Sensorless Technique of Permanent Magnet Synchronous Motor

The direct torque control theory has achieved great success in the control ofinduction motors. However, in the DTC drive system of Permanent Magnet Synchronous Machine (PMSM)proposed a few years ago, there are many basic theoretical problems that must be clarified. Thispaper describes an investigation about the effect of the zero voltage space vectors in the DTCsystem of PMSM and points out that if using the zero voltage space vectors rationally, not only canthe DTC system be driven successfully but also the torque ripple is reduced and the performance ofthe system is improved. This paper also studies the sensorless technique in the DTC system of PMSMand configures the DTC system of PMSM with sensorless technique including zero voltage spacevectors. Numerical simulations and experimental tests have proved the theory correct. In thecondition of sensor-less, the DTC system of PMSM is wide-rangely speed adjusting, and the ratio ofspeed adjustment is 1: 100.

Finite-Control-Set Model Predictive Control of Permanent Magnet Synchronous Motor Drive Systems——An Overview

Permanent magnet synchronous motors(PMSMs)have been widely employed in the industry. Finite-control-set model predictive control(FCS-MPC), as an advanced control scheme, has been developed and applied to improve the performance and efficiency of the holistic PMSM drive systems. Based on the three elements of model predictive control, this paper provides an overview of the superiority of the FCS-MPC control scheme and its shortcomings in current applications. The problems of parameter mismatch, computational burden, and unfixed switching frequency are summarized. Moreover, other performance improvement schemes, such as the multi-vector application strategy, delay compensation scheme, and weight factor adjustment, are reviewed. Finally, future trends in this field is discussed, and several promising research topics are highlighted.

Magnetic field and performance analysis of a tubular permanent magnet linear synchronous motor applied in elevator door system

A novel elevator door driven by tubular permanent magnet linear synchronous motor (TPMLSM) is presented. This TPMLSM applies axial magnet array topology of the secondary rod, air-cored armature windings and slotless structure of the forcer to improve the stability of the thrust. The influence of two major dimensions, the pitch and radius of the permanent magnet (PM), on magnetic field was studied and the best values were given by the finite element analysis (FEA). The magnetic field, back EMF and thrust of the motor were analyzed and the PM size was optimized to reduce the harmonic components of the magnetic field and improve the performance of the motor. Predicted results are validated by the experiment. It is shown that the performance of the motor and the novel elevator door system is satisfying.

Design, Construction and Ocean Testing of Wave Energy Conversion System with Permanent Magnet Tubular Linear Generator

In this paper, the design, construction and ocean testing of a wave energy conversion system are studied. Based on the motion characteristics of double buoys in ocean waves, a wave energy conversion system with permanent magnet tubular linear generator （PMTLG） is proposed to convert ocean wave energy into electricity. The wave energy conversion system was installed in the Yellow Sea near Lianyungang, China. The ocean test re- suits indicate that it had dynamic and static performance, and obtained an expected amount of electricity. The calcu- lation result indicates the average output power was about 1 000 W, and the conversion efficiency from wave en- ergy into electricity was 1.4%. In addition, the wireless data communication, mechanics and oceanography were also discussed.

Application of high-temperature permanent magnets Sm(Co, Fe, Cu, Zr)_Z in PPM focusing system

Rare earth permanent magnets Sm（Co, Fe, Cu, Zr）z with outstanding performance and high-temperature thermal stability were fabricated. Optimized by Fe content and process, Sm（Co0.72Fe0.15Cu0.1Zr0.03）7.5 magnet with B1〉0.75 T and Hci〉1300 kA/m at 300 ℃ can be obtained. According to the performance data of Sm（Co0.72Fe0.15Cu0.1Zr0.03）7.5, the magnetic field along central axis Bz in periodic permanent magnet （PPM） focusing system was simulated using electromagnetic field analysis software Maxwell 2D/3D. The Bz exhibited typical cosine curve along central axis, and the peak value of Bz was high enough to meet the demand of PPM focusing system at room temperature even at 200±20 ℃. Additionally, a kind of simple cooling structure for PPM focusing system was designed by setting cooling pipe between polepieces. Simulated results showed that smooth cosine curve of Bz was successfully achieved with good control of the thickness of cooling pipe.

Guaranteeing the Fault Transient Performance of Aerospace Multiphase Permanent Magnet Motor System: an Adaptive Robust Speed Control Approach

To enhance the fault transient performance of aerospace multiphase permanent magnet synchronous motor(PMSM)system,an adaptive robust speed control is proposed regardless of the phase open-circuit(OC)and short-circuit(SC)fault in this paper,which can be applied for both the redundant motor system and fault tolerant motor system.For aerospace multiphase PMSM system,besides external load disturbance and system parameter perturbation,there inevitably exists the electromagnetic torque ripple in fault transient process,which can degrade the system performance and even cause the system instability.To cope with this issue,the electromagnet torque ripple of the multiphase PMSM system in fault transient process is first analyzed.Then,by considering the electromagnet torque fluctuation caused by fault transient as a system uncertainty,a novel adaptive robust speed control scheme is proposed,while the adaptive law is constructed to emulate the total system uncertainty bound,which include the load disturbance,the parameter variation,and the electromagnetic torque fluctuation due to fault transient.The resulting control can ensure the speed control performance even in fault transient process regardless of the uncertainty,in which no prior estimation of the uncertainty bound is required.In addition,the proposed adaptive robust speed control is demonstrated by a six-phase PMSM experimental platform.The novelty of this research is to explore a novel adaptive robust speed control to strengthen the fault tolerance performance of multiphase PMSM system even in fault transient process,which requires no prior estimation of the uncertainty bound.

Predictive control of a chaotic permanent magnet synchronous generator in a wind turbine system

This paper investigates how to address the chaos problem in a permanent magnet synchronous generator（PMSG） in a wind turbine system. Predictive control approach is proposed to suppress chaotic behavior and make operating stable;the advantage of this method is that it can only be applied to one state of the wind turbine system. The use of the genetic algorithms to estimate the optimal parameter values of the wind turbine leads to maximization of the power generation.Moreover, some simulation results are included to visualize the effectiveness and robustness of the proposed method.

Passive control of Permanent Magnet Synchronous Motor chaotic systems

Permanent Magnet Synchronous Motor model can exhibit a variety of chaotic phenomena under some choices of system parameters and external input. Based on the property of passive system, the essential conditions were studied, by which Permanent Magnet Synchronous Motor chaotic system could be equivalent to passive system. Using Lyapunov stability theory, the convergence condition deciding the system's characters was discussed. In the convergence condition area, the equivalent passive system could be globally asymptotically stabilized by smooth state feedback.

Characteristics and influence factors of mold filling process in permanent mold with a slot gating system

The main problems caused by improper gating are entrained aluminum oxide films and entrapped gas.In this study,the slot gating system is employed to improve mold filling behavior and therefore,to improve the quality of aluminum castings produced in permanent molds.An equipment as well as operation procedures for real-time X-ray radiography of molten aluminum flowing into permanent molds have been developed.Graphite molds transparent to X-rays are utilized which make it possible to observe the flow pattern through a number of vertically oriented gating systems.The investigation discovers that there are many influencing factors on the mold filling process.This paper focuses its research on some of the factors,such as the dimensions of the vertical riser and slot thickness,as well as roughness of the coating layer.The results indicate that molten metal can smoothly fill into casting cavity with a proper slot gating system.A bigger vertical riser,proper slot thickness and rougher coating can provide not only a better mold filling pattern,but also hot melt into the top of the cavity.A proper temperature gradient is obtainable,higher at the bottom and lower at the top of the casting cavity,which is in favor of feeding during casting solidification.

Model predictive torque control of permanent magnet synchronous motor system driven by matrix converter

Employing matrix converter （MC） as driving mode, the strategy of model predictive torque control （MPTC） is proposed for three phase permanent magnet synchronous motor （PMSM） system. MC is applied instead of conventional AC DC AC converter to increase the power factor （PF） of the system input side. MPTC is used to select optimal voltage space vector to enable the system to have satisfactory torque and flux control effect. The resultant MPTC strategy not only makes the MC fed PMSM system operate reliably and have perfect control performance, but also makes the PF of the system input side be 1. Compared with direct torque control （DTC）, the proposed MPTC strategy guarantees that MC fed PMSM has better command following characteristics in the presence of variation of load torque and tracking reference speed. Simulation results verify the feasibility and effectiveness of the proposed strategy.

Toward understanding the microstructure characteristics,phase selection and magnetic properties of laser additive manufactured Nd-Fe-B permanent magnets

Nd-Fe-B permanent magnets play a crucial role in energy conversion and electronic devices.The essential magnetic properties of Nd-Fe-B magnets,particularly coercivity and remanent magnetization,are significantly infuenced by the phase characteristics and microstructure.In this work,Nd-Fe-B magnets were manufactured using vacuum induction melting(VIM),laser directed energy deposition(LDED)and laser powder bed fusion(LPBF)technologies.Themicrostructure evolution and phase selection of Nd-Fe-B magnets were then clarified in detail.The results indicated that the solidification velocity(V)and cooling rate(R)are key factors in the phase selection.In terms of the VIM-casting Nd-Fe-B magnet,a large volume fraction of theα-Fe soft magnetic phase(39.7 vol.%)and Nd2Fe17Bxmetastable phase(34.7 vol.%)areformed due to the low R(2.3×10-1?C s-1),whereas only a minor fraction of the Nd2Fe14B hard magnetic phase(5.15 vol.%)is presented.For the LDED-processed Nd-Fe-B deposit,although the Nd2Fe14B hard magnetic phase also had a low value(3.4 vol.%)as the values of V(<10-2m s-1)and R(5.06×103?C s-1)increased,part of theα-Fe soft magnetic phase(31.7vol.%)is suppressed,and a higher volume of Nd2Fe17Bxmetastable phases(47.5 vol.%)areformed.As a result,both the VIM-casting and LDED-processed Nd-Fe-B deposits exhibited poor magnetic properties.In contrast,employing the high values of V(>10-2m s-1)and R(1.45×106?C s-1)in the LPBF process resulted in the substantial formation of the Nd2Fe14B hard magnetic phase(55.8 vol.%)directly from the liquid,while theα-Fe soft magnetic phase and Nd2Fe17Bxmetastable phase precipitation are suppressed in the LPBF-processed Nd-Fe-B magnet.Additionally,crystallographic texture analysis reveals that the LPBF-processedNd-Fe-B magnets exhibit isotropic magnetic characteristics.Consequently,the LPBF-processed Nd-Fe-B deposit,exhibiting a coercivity of 656 k A m-1,remanence of 0.79 T and maximum energy product of 71.5 k J m-3,achieved an acceptable magnetic performance,comparable to other additive manufacturing processed Nd-Fe-B magnets from MQP(Nd-lean)Nd-Fe-Bpowder.

A Permanent Magnet Linear Synchronous Motor Drive for HTS Maglev Transportation Systems

A permanent magnet linear synchronous motor （PMLSM） for a high temperature superconducting （HTS） maglev system has been studied, including the motor structure, control strategy, and analysis techniques. Finite element analysis （FEA） of magnetic field is conducted to accurately calculate major motor parameters. Equivalent electrical circuit is used to predict the drive＇s steady-state characteristics, and a phase variable model is applied to predict the dynamic performance. Preliminary experiment with a prototype has been made to verify the theoretical analysis and the HTS-PM synchronous driving technology.

Backstepping-based lag synchronization of a complex permanent magnet synchronous motor system

Through introducing the concept of complex current and resetting cross-coupling term, this paper proposes a novel complex permanent magnet synchronous motor system and analyzes its properties. Based on a complex permanent magnet synchronous motor system, we design controllers and achieve lag synchronizations both in real part and imaginary part with backstepping method. In our study, we take complex current, time delay, and structure of complex system into consideration. Numerical simulation results demonstrate the validity of controllers.

Current knowledge for the risk factors of early permanent pacemaker implantation following transcatheter aortic valve replacement and what is next for the primary prevention?

In this editorial,we comprehensively summarized the preoperative risk factors of early permanent pacemaker implantation after transcatheter aortic valve replacement(TAVR)among patients with severe aortic stenosis from several renowned clinical studies and focused on the primary prevention of managing the modifiable factors,e.g.,paroxysmal atrial fibrillation before the TAVR.

Passive control of Permanent Magnet Synchronous Motor chaotic system based on state observer

Passive system theory was applied to propose a new passive control method with nonlinear observer of the Permanent Magnet Synchronous Motor chaotic system. Through constructing a Lyapunov function, the subsystem of the Permanent Magnet Synchronous Motor chaotic system could be proved to be globally stable at the equilibrium point. Then a controller with smooth state feedback is designed so that the Permanent Magnet Synchronous Motor chaotic system can be equivalent to a passive system. To get the state variables of the controller, the nonlinear observer is also studied. It is found that the outputs of the nonlinear observer can approximate the state variables of the Permanent Magnet Synchronous Motor chaotic system if the system’s nonlinear function is a globally Lipschitz function. Simulation results showed that the equivalent passive system of Permanent Magnet Synchronous Motor chaotic system could be globally asymptotically stabilized by smooth state feedback in the observed parameter convergence condition area.

Controllability and Observability of 2-DOF Permanent Magnet Maglev System with Linear Control

A new type of 2-DOF(degree of freedom) magnetic levitation system for multi-DOF levitation is proposed. In this system, the force of permanent magnets are used for levitation and controlled by adjusting the reluctance of the magnetic circuit. Using permanent magnets, the feature of this system is effective for saving energy and avoiding heat generation. First, the principle of the levitation system and typical reluctance control methods are described. Second, an experimental device based on the principle is introduced. Finally, the feasibility of this system is considered from linear control theory.

Dynamic Analysis of Micro-machined Diamagnetic Stable Permanent Magnet Levitation System

A novel micro-machined diamagnetic stable.levitation system （MDSLS） which is composed of a free permanent magnetic rotor, a ring lifting permanent magnet and two diamagnetic stabilizers was presented. The static and dynamic stable characters of MDSLS were analyzed. The coupled non-linear differential equations were used to describe six-degree-of-freedom motion of the levitated rotor, and the equivalent surface current and combined dia- magnetic image current method were utilized to model the interaction forces and torques between the lifting perma- nent magnet and rotor permanent magnet and also between the rotor permanent magnet and diamagnetic sub- strates. Because of difficulty to get analytical solution, the numerical calculation based on Runge-Kutta method was used to solve the dynamic model. The vibration frequencies were identified b~ fast Fourier transform （FFT） analysis. According to their resonance characteristics and parameters, the translational and angular dynamic stiff- ness were also calculated. The results show that the levitation of the rotor in MDSLS is stable, and the MDSLS is potential for the application in levitation inertial sensor.

On the treatment of thermal cracks in lining concrete of water conveyance system of Three Gorges Project permanent ship locks

A comprehensive investigation was performed for repairing the different types of cracks appearing on the surface or inside the concrete lining at various depths.The mate- rial properties used in grouting and two methods for crack repair were discussed in details, and consequently reliable repair measures were proposed and implemented.It is a better choice to adopt the hole-drilling method for the relatively regular crack.The grouting pres- sure should not be too high and it is generally between 0.4～0.6 MPa.For the second time grouting,the pressure maybe increased to 0.8 MPa.Other method is the pasting nozzles method which is more suitable for irregular cracks such as cracks with intensive density and crossing cracks.Its grouting pressure is generally between 0.6～1.0 MPa.The in-situ tests in Three Gorges Project demonstrate favorably the feasibility and applicability of the proposed methods for crack repair within the lining concrete.