In order to study the physical and chemical reaction after CO2 injected into coal beds at different condition.The physical and chemistry reaction among CO2,H2O and coal was studied,and the influence on permeability an...In order to study the physical and chemical reaction after CO2 injected into coal beds at different condition.The physical and chemistry reaction among CO2,H2O and coal was studied,and the influence on permeability and porosity of coal beds was carried out.The experimental method was used,so did the basic theory of mineralogy,coal petrology,geochemistry,analytical geochemistry and physical chemistry.In this experiment,the changes of mineral and permeability of coal and water quality were observed through CO2 solution reacting with different coal samples.The differences could be found out by comparing the properties and microcrystalline structure before and after the reaction.There are three results were carried out:First,the content of carbonate in coal beds decreases because of the dissolution reaction between carbonate minerals and CO2 solution,and precipitation is formed by reaction of chlorite and orthoclase.Second,the result that permeability and porosity of coal beds are improved after the reaction is proposed.Third,the initial permeability of different coal samples plays a great role on the reaction,and the improvement of permeability is not obvious in the samples which have too low or too high permeability,and the improvement is good in medium permeability(0.2–3 mD).展开更多
Iron ore sintering is a pre-treatment technology by which orefines are converted into porous and permeable sin-ters,which are the used in blast furnaces.This process can be adversely affected by air leakage phenomena ...Iron ore sintering is a pre-treatment technology by which orefines are converted into porous and permeable sin-ters,which are the used in blast furnaces.This process can be adversely affected by air leakage phenomena of various types.As experimental measurements are relatively difficult and often scarcely reliable,here a theoretical model based on typicalfluid-dynamic concepts and relationships is elaborated.Through the analysis of two extreme cases,namely,those in which leakage is due to a small hole or a full rupture,a generalized hole-bed mod-el is introduced,which for thefirst time also includes a complete bed permeability equation and can deal with different leakage position conditions.The results show that the model can evaluate the influence of leakage on the system at one time and be used to calculate theflowrate and pressure drop.Notably,the obtained results are within a 15%deviation with respect to available experiment values,used for comparison.展开更多
Poor permeability and low sintering productivity restrict the development of high-bed sintering.An efficient method of the double-layer sintering process(DLSP)was proposed to achieve high-bed sintering and solve the a...Poor permeability and low sintering productivity restrict the development of high-bed sintering.An efficient method of the double-layer sintering process(DLSP)was proposed to achieve high-bed sintering and solve the aforementioned problems.Theoretical calculation and sintering pot experiments were implemented to investigate the double-layer sintering process.Traditional sintering process and DLSP were compared in terms of sintering indices,metallurgical properties and morphology characterization.Under the condition of traditional sintering process,DLSP successfully realized fast velocity and highly productive sintering of 1000-mm high bed.After the sintering bed is charged and ignited twice,the air permeability of the bed has been greatly improved.Sintering time is shortened significantly by simultaneous sintering of the upper and lower feed layers.Under the condition of bed height proportion of 350/650 mm and pre-sintering time of 20 min,the yield,tumbler strength,productivity and solid fuel consumption are 69.96%,65.87%,1.71 t(m^(2)h)^(-1)and 56.71 kg/t,respectively.Magnetite,hematite,calcium ferrite and complex calcium ferrite are the main phases of DLSP products.The metallurgical properties of DSLP products meet the requirement of ironmaking.It indicates that DLSP is an effective method to solve the disadvantages of bad permeability and low sintering productivity in high-bed sintering.展开更多
基金supported by the China National Major Scientifc and Technological Special Project for ‘‘Physical and Chemical Reaction between CO2 and Coal and Rock after Infuse CO2 into Deep Coal Bed’’ during the Twelfth Five-Year Plan Period(No.2011ZX05042-03)
文摘In order to study the physical and chemical reaction after CO2 injected into coal beds at different condition.The physical and chemistry reaction among CO2,H2O and coal was studied,and the influence on permeability and porosity of coal beds was carried out.The experimental method was used,so did the basic theory of mineralogy,coal petrology,geochemistry,analytical geochemistry and physical chemistry.In this experiment,the changes of mineral and permeability of coal and water quality were observed through CO2 solution reacting with different coal samples.The differences could be found out by comparing the properties and microcrystalline structure before and after the reaction.There are three results were carried out:First,the content of carbonate in coal beds decreases because of the dissolution reaction between carbonate minerals and CO2 solution,and precipitation is formed by reaction of chlorite and orthoclase.Second,the result that permeability and porosity of coal beds are improved after the reaction is proposed.Third,the initial permeability of different coal samples plays a great role on the reaction,and the improvement of permeability is not obvious in the samples which have too low or too high permeability,and the improvement is good in medium permeability(0.2–3 mD).
文摘Iron ore sintering is a pre-treatment technology by which orefines are converted into porous and permeable sin-ters,which are the used in blast furnaces.This process can be adversely affected by air leakage phenomena of various types.As experimental measurements are relatively difficult and often scarcely reliable,here a theoretical model based on typicalfluid-dynamic concepts and relationships is elaborated.Through the analysis of two extreme cases,namely,those in which leakage is due to a small hole or a full rupture,a generalized hole-bed mod-el is introduced,which for thefirst time also includes a complete bed permeability equation and can deal with different leakage position conditions.The results show that the model can evaluate the influence of leakage on the system at one time and be used to calculate theflowrate and pressure drop.Notably,the obtained results are within a 15%deviation with respect to available experiment values,used for comparison.
基金the National Key Research and Development Program of China(2017YFB0304301)the Fundamental Research Funds for the Central Universities of Central South University(No.202044016).
文摘Poor permeability and low sintering productivity restrict the development of high-bed sintering.An efficient method of the double-layer sintering process(DLSP)was proposed to achieve high-bed sintering and solve the aforementioned problems.Theoretical calculation and sintering pot experiments were implemented to investigate the double-layer sintering process.Traditional sintering process and DLSP were compared in terms of sintering indices,metallurgical properties and morphology characterization.Under the condition of traditional sintering process,DLSP successfully realized fast velocity and highly productive sintering of 1000-mm high bed.After the sintering bed is charged and ignited twice,the air permeability of the bed has been greatly improved.Sintering time is shortened significantly by simultaneous sintering of the upper and lower feed layers.Under the condition of bed height proportion of 350/650 mm and pre-sintering time of 20 min,the yield,tumbler strength,productivity and solid fuel consumption are 69.96%,65.87%,1.71 t(m^(2)h)^(-1)and 56.71 kg/t,respectively.Magnetite,hematite,calcium ferrite and complex calcium ferrite are the main phases of DLSP products.The metallurgical properties of DSLP products meet the requirement of ironmaking.It indicates that DLSP is an effective method to solve the disadvantages of bad permeability and low sintering productivity in high-bed sintering.