Impacts of weaning age on dietary needs of whey permeate for pigs at 7 to 11 kg body weight

Background:Whey permeate is an effective lactose source for nursery pigs and the most benefits are obtained when pigs are at 7 to 11 kg BW.Altering weaning ages could cause different length of early-weaner phases until 7 kg BW and thus it would influence the dietary need of whey permeate during 7 to 11 kg BW of pigs.This study aimed to evaluate if weaning ages would affect the dietary needs of whey permeate for optimum growth performance of pigs at 7 to 11 kg BW.Methods:A total of 1,632 pigs were weaned at d 21(d 21.2±1.3)or d 25(d 24.6±1.1)after birth.All pigs had a common early-weaner feeds until they reached 7 kg BW.When pigs reached 7 kg BW within a weaning age group,they were allotted in a randomized complete block design(2×4 factorial).Two factors were weaning age groups(21 and 25 d of age)and varying whey permeate levels(7.50%,11.25%,15.00%,and 18.75%).Data were analyzed using the GLM and NLIN procedures of SAS for slope-ratio and broken-line analyses to determine the growth response to whey permeate and optimal daily whey permeate intake for the growth of the pigs weaned at different ages.Results:Pigs weaned at 21 d of age had a common diet for 11 d to reach 7 kg BW whereas pigs weaned at 25 d of age needed 2 d.The G:F of pigs weaned at 25 d of age responded to increased daily whey permeate intake greater(P<0.05)than pigs weaned at 21 d of age.Breakpoints were obtained(P<0.05)at 88 and 60 g/d daily whey permeate intake or 17.0%and 14.4%of whey permeate for G:F of pigs weaned at 21 and 25 d of age,respectively.Conclusion:Pigs weaned at an older age with a short early-weaner phase had a greater growth response to whey permeate intake compared with pigs weaned at a younger age with a long early-weaner phase.Altering weaning ages affected dietary needs of whey permeate for optimum growth performance of pigs from 7 to 11 kg BW.

Simultaneous recovery of phosphorus and nitrogen from liquid digestate by vacuum membrane distillation with permeate fractional condensation

A vacuum membrane distillation(VMD)process with permeate fractional condensation on membrane downstream has been developed for simultaneous recovery of phosphorus and nitrogen from liquid digestate.The polytetrafluoroethylene(PTFE)membrane flux could reach 6000 g·m-2·h-1 with the rejection efficiency of total phosphorus(TP)over 0.99,under the condition of flowrate being 120 L·h-1 and temperature being 40°C.Membrane fouling occurred with a film of organics and microorganism deposited on the surface of the membrane.Membrane flux could be reversed after the membrane was rinsed by water.Higher feed temperature and flowrate could improve the membrane flux,while hardly affect the rejection efficiency of total phosphorus.The concentration of TP could reach 1600 mg·L-1 after membrane distillation,which is about 5 times of that in initial liquid digestate.On the downstream of the membrane,some of the permeate vapor was condensed under the vacuum condition and most of water was collected here.The remaining vapor enriched with total nitrogen(TN)was compressed and pumped to the atmospheric condition to condense.The TN concentration in atmospheric condensate was as high as 7000 mg·L-1 with the process separation factor for ammonia being enhanced to 114.

Antifungal Activity against <i>Aspergillus parasiticus</i>of Supernatants from Whey Permeates Fermented with Kefir Grains

Aspergillus parasiticus, a common fungal contaminant in food, produces aflatoxin B1, which is classified as human carcinogen. Kefir is an ancient fermented beverage obtained by the fermentation of different substrates with kefir grains. A very important waste produced by the dairy cheese industry is the whey permeate, which nowadays is a strong ambient contaminant. The aim of this work was to assess the effect of whey permeates fermented with kefir grains against A. parasiticus growth, aflatoxin B1 biosynthesis, and the kefir microorganisms protection against the cell damage produced by aflatoxin B1. It was observed that kefir-cell-free-supernatants (CFS) produced fungal inhibition. A fungicidal effect was observed with 65% v/v of CFS in the culture medium (final pH 4.55 and total undissociated lactic and acetic acid concentration 34.08 mM). Under these conditions, aflatoxin production was not detected. Finally, it was found that non-viable kefir microorganisms protected HepG2 cells from the damage produced by aflatoxin B1.

Application of Whey Permeate Fermented with Kefir Grains for the Shelf-Life Improvement of Food and Feed

Fungal contamination by Aspergillus parasiticus and A. flavus causes negative effects on the production of food cereals. Kefir is an ancient fermented beverage obtained by the fermentation of different substrates with kefir grains. An important waste produced by the dairy cheese industry is the whey permeate, which nowadays is a strong ambient contaminant. The aim of this work was the standardization of the whey permeate fermenting conditions with kefir grains, the assessment of the antifungal activity of the cell-free-supernatants (CFS) from these fermentations and to compare it with that obtained with CFS of milk fermented with kefir grains. Finally, we studied if the addition of kefir fermented whey permeate to food (bread) and feed (poultry) could produce shelf life improvement. The optimal condition to obtain CFS with fungicidal effect was a fermentation with 10% w/v of kefir grains, at 30°C, for 24 hours until a pH 3.7. We found that CFS from whey permeate caused fungal inhibition, whereas CFS of kefir grains grown in milk showed lower antifungal activity. Additionally, the addition of kefir-fermented whey permeates in food (bread) and feed (poultry) improved their resistance to fungal contamination. This is the first report about the application of kefir-fermented whey permeate to improve the shelf life, suggesting its potential use as a biopreservative.

A METHOD FOR DETERMINATION OF CONCENTRATION OF ATOMIC HYDROGEN PERMEATED IN MULTI-LAYER STRUCTURE WALL OF HYDROGENATION REACTORS

It was proposed how the concentration distribution was calculated in the treble lager wall of hgdrogenation reactor according to the principle of hydrogen diffusion at the steady state in this paper. Based on the steady hydrogen permeation current density i∞ measund with the hydrogen probe at a given temperature, the hydmpen concentrationson the key interfaces and hydrogen distribution at any given mdial profile in the single, double or treble layer wall of hydrogenation reactor could be found by applying the presented equations throoph suitable parmeters ioput. The theoretical bases were provided for developing the nondestructive probing technique of the concentration of atomic hydmpen in the wallS of hydrogenation reactors.

Electrifying Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3-δ) for focalized heating in oxygen transport membranes

Industry decarbonization requires the development of highly efficient and flexible technologies relying on renewable energy resources,especially biomass and solar/wind electricity.In the case of pure oxygen production,oxygen transport membranes(OTMs)appear as an alternative technology for the cryogenic distillation of air,the industrially-established process of producing oxygen.Moreover,OTMs could provide oxygen from different sources(air,water,CO_(2),etc.),and they are more flexible in adapting to current processes,producing oxygen at 700^(-1)000℃.Furthermore,OTMs can be integrated into catalytic membrane reactors,providing new pathways for different processes.The first part of this study was focused on electrification on a traditional OTM material(Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3-δ)),imposing different electric currents/voltages along a capillary membrane.Thanks to the emerging Joule effect,the membrane-surface temperature and the associated O_(2) permeation flux could be adjusted.Here,the OTM is electrically and locally heated and reaches 900℃on the surface,whereas the surrounding of the membrane was maintained at 650℃.The O_(2)permeation flux reached for the electrified membranes was~3.7 NmL min^(-1)cm^(-2),corresponding to the flux obtained with an OTM non-electrified at 900℃.The influence of depositing a porous Ce_(0.8)Tb_(0.2)O_(2-δ) catalytic/protective layer on the outer membrane surface revealed that lower surface temperatures(830℃)were detected at the same imposed electric power.Finally,the electrification concept was demonstrated in a catalytic membrane reactor(CMR)where the oxidative dehydrogenation of ethane(ODHE)was carried out.ODHE reaction is very sensitive to temperature,and here,we demonstrate an improvement of the ethylene yield by reaching moderate temperatures in the reaction chamber while the O_(2) injection into the reaction can be easily fine-tuned.

The effect of reactive plasticizer on viscoelastic and mechanical properties of solid rocket propellants based on different types of HTPB resin

Conventional plasticizers deteriorate mechanical and viscoelastic properties of the propellants due to their migration upon aging and long-term storage,which affects reliability and safety properties during exploitation.To address this issue,conventional plasticizer,dioctyl adipate(DOA),is replaced by reactive one,castor oil(CO).In addition,three different types of HTPB were used to obtain propellants with designed viscoelastic and mechanical properties.The CO increased propellants viscosity,without a significant impact on the propellant processability,regardless to the type of prepolymer.Conversely,mechanical properties were different depending on the type of resin,which were further analyzed by gel permeation chromatography(GPC).Addition of CO formed a denser polymer network and shifted T_(g) to higher values,compared to the compositions with DOA.The tensile strength of CO-containing propellants was lower at +20℃ and +50℃ compared to the reference compositions,while the strain at maximum load and strain at break were significantly increased with pronounced plastic deformation,especially for samples at -30℃.The inclusion of CO in the propellants composition gives more room for adjusting a wide range of mechanical properties.

Research Progress on Application of Borneol As Permeation Enhancer in Functional Cosmetics

Borneol, as a traditional natural permeation enhancer, has been widely used to promote the transdermal absorption of active ingredients. In this review, the mechanism of borneol in promoting permeation by destroying the highly ordered lipid structure of the lipid layer and by destroying the hydrogen-bond network was described. The application of borneol in promoting the transdermal absorption of the active ingredients of traditional Chinese medicine and chemical drugs was introduced. The application of borneol as a natural ingredient added to functional cosmetics was summarized, and its effects on skin-spot treatment, acne skin care, eczema skin care, skin repair and anti-oxidation were introduced. Finally, the possible problems in the application of borneol in cosmetics were put forward, and the application prospect of borneol in the development of cosmetics was given.

An Overview of Soil Improvement through Ground Grouting

Soil is an essential component of what surrounds us in nature, providing as the basis for our infrastructure and construction. However, soil is not always suitable for construction due to a variety of geotechnical issues such as inadequate bearing capacity, excessive settlement, and liquefaction susceptibility. Through improving the engineering qualities of soil, such as strength, permeability, and stability, ground grouting is a specific geotechnical method used. Using a fluid grout mixture injected into the subsurface, holes are filled and weak or loose strata are solidified as the material seeps into the soil matrix. The approach’s adaptability in addressing soil-related issues has made it more well-known in the fields of civil engineering and construction. In the end, this has improved groundwater management, foundation support, and overall geotechnical performance.

Gas-and plasma-driven hydrogen permeation behavior of stagnant eutectic-solid GaInSn/Fe double-layer structure

Gas-driven permeation(GDP)and plasma-driven permeation(PDP)of hydrogen gas through Ga In Sn/Fe are systematically investigated in this work.The permeation parameters of hydrogen through Ga In Sn/Fe,including diffusivity,Sieverts'constant,permeability,and surface recombination coefficient are obtained.The permeation flux of hydrogen through Ga In Sn/Fe shows great dependence on external conditions such as temperature,hydrogen pressure,and thickness of liquid Ga In Sn.Furthermore,the hydrogen permeation behavior through Ga In Sn/Fe is well consistent with the multilayer permeation theory.In PDP and GDP experiments,hydrogen through Ga In Sn/Fe satisfies the diffusion-limited regime.In addition,the permeation flux of PDP is greater than that of GDP.The increase of hydrogen plasma density hardly causes the hydrogen PDP flux to change within the test scope of this work,which is due to the dissolution saturation.These findings provide guidance for a comprehensive and systematic understanding of hydrogen isotope recycling,permeation,and retention in plasma-facing components under actual conditions.

Effect of slag composition on corrosion resistance of high chromia refractory bricks for industrial entrained-flow gasifier

The slag composition corresponding to different coals varies significantly,which directly affects the operation of industrial entrained-flow gasifier and the service life of refractory bricks.In this study,the corrosion resistance of several typical coal slags for gasification on high chromia refractory bricks was comparatively investigated by static laboratory crucible tests and thermodynamic simulations.The results demonstrated that the corrosion degree of high chromia refractory bricks by different coal slags was high-Ca/Na slag>high-Fe slag>high-Si/Al slag.The surface structure of the refractory was relatively flat after corrosion by high-Si/Al slag,and the primary corrosion reaction was the partial dissolution of the matrix by the slag.High-Fe slag was prone to the precipitation of iron phases as well as the formation of(Mg,Fe)(Al,Cr)_(2)O_(4)composite spinel layer at the slag/refractory interface.The high-Ca/Na slag was susceptible to react with the refractory to yield a low melting point phase,which led to the destruction of the matrix structure of the refractory and an isolated distribution of particles.In addition,the monoclinic ZrO_(2) in the refractory reacted with CaO in the slag to formed calcium zirconate,which loosened its phase toughening effect,was the primary factor that aggravated the refractory corrosion.

Improvement of hydrogen permeation barrier performance by iron sulphide surface films

Fe–S compounds with hexagonal crystal structure are potential hydrogen permeation barrier during H2S corrosion. Hexagonal system Fe–S films were prepared on carbon steel through corrosion and CVD deposition, and the barrier effect of different Fe–S films on hydrogen permeation was tested using electrochemical hydrogen permeation method. After that, the electrical properties of Fe–S compound during phase transformation were measured using thermoelectric measurement system. Results show that the mackinawite has no obvious barrier effect on hydrogen penetration, as a p-type semiconductor, and pyrrhotite (including troilite) has obvious barrier effect on hydrogen penetration,as an n-type semiconductor. Hydrogen permeation tests showed peak permeation performance when the surface was deposited with a continuous film of pyrrhotite (Fe_(1–x)S) and troilite. The FeS compounds suppressed hydrogen permeation by the promotion of the hydrogen evolution reaction, semiconducting inversion from p-to n-type, and the migration of ions at the interface.

Research Progress on Application of Borneol as Permeation Enhancer in Functional Cosmetics

Borneol,as a traditional natural permeation enhancer,has been widely used to promote the transdermal absorption of active ingredients.The mechanism of borneol in promoting permeation by destroying the highly ordered lipid structure of the lipid layer and by destroying the hydrogen-bond network was described.The application of borneol in promoting the transdermal absorption of the active ingredients of traditional Chinese medicine and chemical drugs was introduced.The application of borneol as a natural ingredient added to functional cosmetics was summarized,and its effects on skin-spot treatment,acne skin care,eczema skin care,skin repair and anti-oxidation were introduced.Finally,the possible problems in the application of borneol in cosmetics were put forward,and the application prospect of borneol in the development of cosmetics was given。

凝胶渗透色谱和气相色谱-质谱法测定动物食品中27种有机氯和15种拟除虫菊酯类农药残留量

A GC-MS method for the determination of 27 organochlorine pesticides and 15 Pyrethroid pesticides in animal food is established.The method was based on Gel Permeation chromatography combined with solid-phase extraction for sample preparation.Rapid qualitative and quantitative analyses was carried out by gas chromatography-mass spectrometry under the selective-ion monitoring mode.The experimental results showed that the correlation coefficients were better than 0.99,the recoveries for spiked standards were 70%-104%,the relative standard deviations were 2.1%-15.9%.

Study on Separation of Water and Alumina Fine Particles by Cross-Flow Microfiltration

A cross-flow microfiltration process had been developed to separate alumina fine particles from the suspension using a stainless steel membrane tube with a pore size of 10 μm. The influence of cross-flow velocity and trans-membrane pressure on the permeate flux and the solid holdup in permeate had been investigated. It was found that both the permeate flux and the solid holdup in permeate decreased with time. Moreover, the permeate flux increased with an increasing transmembrane pressure but the influence of cross-flow velocity on the permeate flux was quite complex. Both the permeate flux and the solid holdup in permeate in long term filtration had been studied. The operation of cross-flow microfiltration could be carried out stably for 10 hours with the permeate flux values ranging from 520.5 to 936 L/(m^2·h) at rs=1%, while it could continue in 10 hours with the permeate flux values ranging from 226 to 432 L/(m^2·h) at rs=5%. The solid holdup in permeate had been less than 10 mg/L during the whole operating cycle.

Removal of Pesticides from Water Using Granular Activated Carbon and Ultrafiltration Membrane—A Pilot Plant Study

The use of powdered activated carbon for fouling control in the membrane processes is limited by some secondary problems associated with its use, like cake formation, long backwash times and blackening of pipes. Granular activated carbon (GAC) was used as an alternative of powdered activated carbon due to its large particle size which was kept from being entering into the membrane system. The secondary problems associated with the use of powdered activated carbon as foul control were not observed for granular activated carbon. Langmuir and Freundlich adsorption were used to describe the adsorption of 2,4-D and paraquat on GAC. Adsorption capacity of adsorbent was high for 2,4-D as compared to paraquat. Also, the R2 value was high for Langmuir model as compared to Freundlich model. Retention percentage of 2,4-D by membrane was high and thus the decline in permeate flux was high as compared to paraquat in ultrafiltration (UF) membrane process. 100% retention of 2,4-D was achieved in GAC/UF hybrid system. Improved permeate fluxes were observed for both contaminants in the hybrid system.

高水平大学建设下高校文理渗透人才培养模式探析

长期以来,我国高校面临着学科分化严重的现象,使得我国高水平大学建设中人才培养模式问题凸显出来。高水平大学建设要求高校人才培养模式要加强学与思的结合、知与行的统一,加强学生基础知识、专业知识和实践能力的培养。文理渗透是实施科教兴国和人才强国相结合的综合素质教育,是未来社会对人才的基本要求,因此,我国高水平大学建设应该在转换教育观念、优化课程结构、加强师资队伍建设和丰富校园文化方面建设一个文理渗透的育人环境。

Microstructure and Element Profile of Rare Earth Permeating Layer of Al Bronze

Rare earth (RE) atoms were permeated into the surface of Al bronze (Cu-7. gA1-1. 9 Sn) by the method of chemical heat treatment. The permeated layer was then analysed by TEM (Transmission Electron Microscope) , EPMA (Electronic Probe Microanalysis) and IMA (Ion Microprobe Appratus). The results show that CuREAl and dispersed η phase (Cu6Sn5) distribute in the layer, RE content decreases in the depth direction, and alloying elements (Al, Sn) are enriched in the outer layer and dilute in the second layer.

Application of Submerged Ultrafiltration in Pretreatment of Flue Gas Desulfurization Wastewater

Nowadays,the zero liquid discharge of flue gas desulfurization(FGD)wastewater from coal-fired units has attracted the attention of all countries in the world.The pretreatment methods generally have the problems of high operation cost,small treatment capacity,and poor flexibility.However,the membrane method can avoid the above problems.In the current research,it has not been found that someone directly uses submerged ultrafiltration to pretreat FGD wastewater.Therefore,this paper innovatively proposed to directly use ceramic ultrafiltration membrane to treat FGD wastewater,which can ensure effluent quality and improve the flexibility of the pretreatment system.In this paper,the performance of submerged ultrafiltration membrane for the filtration of FGD wastewater from a power plant was studied to optimize the filtration performance and improve the effluent quality.The effects of operating parameters such as membrane permeate flux,aeration rate and filtration/backwashing time combination on the membrane performance were studied.The results showed that when the filtration/backwashing time combination was 15 min/30 s,with the increased in permeate flux from 55 L/(m2·h)to 100 L/(m2·h),the steady transmembrane pressure(TMP)increased from 39 kPa to 70 kPa,and the fouling rate increased significantly from 4.5 kPa/h to 7.3 kPa/h;When the aeration rate increased from 10 m3/(m2·h)to 30 m3/(m2·h),the membrane pollution was much reduced.Excessive aeration rate cannot further alleviate the membrane pollution,but also brought greater energy consumption;Increasing backwashing time can effectively inhibit the formation of gel layer on the surface of the membrane and prolong the initial stage of low-pressure operation;The rejection of suspended solids(SS)and turbidity of the equipment studied in this paper can reach more than 99%under various working conditions,which can satisfy the water quality requirements of the subsequent steps.The submerged ultrafiltration membrane was suitable for the pretreatment of FGD wastewater because it can ensure the quality of permeate under the premise of long-term operation.

Pilot Study of Ultrafiltration-Nanofiltration Process for the Treatment of Raw Water from Huangpu River in China

Pilot-scale test was carried out to evaluate the performance of a combined ultrafiltration (UF)-nanofiltration (NF) membrane process for the treatment of raw water from Huangpu River, Shanghai, in China. Results showed that UF could significantly remove turbidity, iron and manganese, and also could retain a part of high molecular weight (MW) organic compounds. Subsequently, NF could further reject low MW organics and inorganic salts, and ensured the treated water to reach the Standards for Drinking Water Quality in China. It seemed that 90 L/m2&#183h was an appropriate permeate flux for UF system when the raw water was directly filtered by UF membrane, the addition of coagulant (alum or ferric chloride) was not preferable to mitigate the fouling of the UF membrane. After near 120 days operation, the permeate flux of NF could be main-tained at 24-25 L/m2&#183h steadily, and no chemical clean was required.