A fractional frequency divider based on phase switching and negative feedback delta-sigma modulator for MMMS applications

A fractional frequency divider based on phase switching and negative feedback delta-sigma modulator(NF-DSM) is presented. The phase switching circuit, realized by switching 8 signals generated by a divider-by-4 circuit, is adopted to reduce the frequency division step. The NF-DSM, which can obtain smooth output spectra, is proposed to generate the fractional part of the division ratio, moreover, the integer part of the division ratio is realized by a divider-by-2/3 circuit chain. Fabricated in TSMC 0.18 μm RF CMOS technology, the fractional frequency divider achieves a measured operation frequency from 0.5 GHz to 8 GHz. With a 1.8 V supply voltage, the maximum current consumption of the whole divider is 17.5 mA, and the chip area is 0.58 mm^2, including the pads.

Motion-copying method with symbol sequence-based phase switch control for intelligent optical manufacturing

Implementation of robot-based motion control in optical machining demonstrably enhances the machining quality.The introduction of motion-copying method enables learning and replicating manipulation from experienced technicians.Nevertheless,the location uncertainties of objects and frequent switching of manipulated spaces in practical applications impose constraints on their further advancement.To address this issue,a motion-copying system with a symbol-sequence-based phase switch control(SSPSC)scheme was developed by transferring the operating skills and intelligence of technicians to mechanisms.The manipulation process is decomposed,symbolised,rearranged,and reproduced according to the manufacturing characteristics regardless of the change in object location.A force-sensorless adaptive sliding-mode-assisted reaction force observer(ASMARFOB),wherein a novel dual-layer adaptive law was designed for high-performance fine force sensing,was established.The uniformly ultimate boundedness(UUB)of the ASMARFOB is guaranteed based on the Lyapunov stability theory,and the switching stability of the SSPSC was examined.Validation simulations and experiments demonstrated that the proposed method enables better motion reproduction with high consistency and adaptability.The findings of this study can provide effective theoretical and practical guidance for high-precision intelligent optical manufacturing.

Optical simulation of in-plane-switching blue phase liquid crystal display using the finite-difference time-domain method

The finite-difference time-domain method is used to simulate the optical characteristics of an in-plane switching blue phase liquid crystal display.Compared with the matrix optic methods and the refractive method,the finite-difference timedomain method,which is used to directly solve Maxwell＇s equations,can consider the lateral variation of the refractive index and obtain an accurate convergence effect.The simulation results show that e-rays and o-rays bend in different directions when the in-plane switching blue phase liquid crystal display is driven by the operating voltage.The finitedifference time-domain method should be used when the distribution of the liquid crystal in the liquid crystal display has a large lateral change.

Research of Three-Phase Unbalanced Treatment in Low-Voltage Distribution Network Based on New Commutation Switch

Low-voltage distribution systems in our country are mostly used in agricultural loads and household loads. The value and using time of these kinds of loads are uncontrollable, which lead to the three-phase imbalance in low-voltage distribution system, and seriously affect the quality of power supply. A new type of the commutation system and an improved quantum genetic algorithm (IQGA) are proposed in the paper. At last, the rationality and the efficiency of the method are verified by a practical example.

Dynamic resistive switching in a three-terminal device based on phase separated manganites

A three-terminal device based on electronic phase separated manganites is suggested to produce high performance resistive switching. Our Monte Carlo simulations reveal that the conductive filaments can be formed/annihilated by reshaping the ferromagnetic metal phase domains with two cross-oriented switching voltages. Besides, by controlling the high resistance state（HRS） to a stable state that just after the filament is ruptured, the resistive switching remains stable and reversible, while the switching voltage and the switching time can be greatly reduced.

Phase field simulation of the 180°domain-switching process in PbTiO_3 single crystal under an antiparallel electric field

The process of 180°domain switching in PbTiO_3 single crystal under an antiparallel electric field was investigated by the three-dimensional phase field simulation,especially the effect of electric field on the type and duration of domain switching.It is found that the polarization reversal of domains takes place under an antiparallel electric field in PbTiO_3 single crystal.The results of the phase field simulation indicate that there is only 90°domain switching under a weak electric field.With the rise of the electric field,180°domain switching appears.If the electric field is strengthened further,90°domain switching disappears and the duration of domain switching is shortened.

多策略融合的蛇优化算法及其应用

针对蛇算法寻优阶段交互性差,初始种群随机程度严重,易陷入局部最优解等问题,提出了一种多策略融合的蛇优化算法(multi-strategy snake optimizer, MSSO)。首先,利用正交矩阵对蛇种群进行初始化,使个体分布更加均匀;其次,设计探索开发阶段切换的自适应方程,用以替换原有的食物量与温度阈值,使算法进行自适应阶段切换;最后,使用联合反向选择策略替换算法原有的新个体孵化方法,提高算法收敛精度的同时加快算法收敛效率。选取10个基准测试函数从不同角度对MSSO算法进行实验,测试算法性能,分析各策略的有效性,并使用Wilcoxon秩和检验来证明算法显著性,通过两个工程应用仿真实验来验证MSSO的实用性。各实验结果表明MSSO较比较算法综合表现更优,证明MSSO算法改进在寻优能力、鲁棒性、实用性等方面均有所提升。

Analysis of a novel phase-shifted soft switch converter

In this paper, on the basis of the phase shifted controlled zero voltage switch (ZVS) full bridge converter with pulse width modulation (PWM), a novel zero voltage and zero current switch (ZVZCS) PWM converter using a simple auxiliary circuit was designed. The ZVZCS soft switch is achieved by the resonance among the resisting electromagnetic deflection capacitor, the capacitor of the simple auxiliary network and the leakage inductor of transformer. There are no dissipation devices of the saturation inductor and the auxiliary switch in the converter, meantime the capacitor of the auxiliary circuit is also used to clamp the voltage of the rectifier, and there is no additional clamped circuit. There is no big circulating current in the converter, all the active and passive devices work on the condition of the low current and voltage stress, and the proposed converter has wide load range and small duty loss.

宽增益高效率级联式四开关Buck-Boost LLC变换器

为了解决变频控制的桥臂共用型四开关Buck-BoostLLC级联变换器磁性元件设计和优化困难的问题,提出一种二次侧为特殊全桥整流结构的级联式四开关Buck-Boost LLC变换器。通过控制二次侧开关管的交叠导通时间以拓宽变换器的电压增益。该变换器可根据不同的输入电压范围工作在交叠模式和整流模式;在不改变变换器参数的条件下将增益显著提高,能够适应更宽范围的输入电压,同时保持了变换器较高的工作效率。在两种工作模式的基础上,采用移相控制使变换器所有开关管实现零电压导通(ZVS),二极管实现零电流关断(ZCS)。结合状态平面轨迹分析法,对定频控制的级联式四开关Buck-Boost LLC变换器进行模态分析,并推导两种工作模式下的输入-输出表达式和开关管的软开关实现条件。最后,通过研制一台70~280 V输入、240 W/28 V输出的实验样机,验证了理论分析的正确性。

基于新能源发电改进型移相全桥变换器研究

新能源发电中需要广泛使用移相全桥变换器,以实现软开关技术从而减小系统的开关损耗。而传统移相全桥直流变换器滞后臂在轻载时难以实现ZVS,导致系统大功率输出时效率降低以及系统换路时容易产生尖峰电压、电流等现象,针对这一问题,提出了一种改进的有源软开关移相全桥DC-DC变换器拓扑。系统首先提出了改进变换器的拓扑结构,在此基础上对其工作模态进行了研究分析,并合理优化相关器件的选型,最后通过系统仿真及试验平台进行了系统仿真和试验测试,结果表明,所设计的加入辅助电路改进型移相全桥直流变换器在轻载情况下,能够使变换器滞后臂达到软开关效果,同时,在大功率输出情况下,对器件发热、电压波形振荡均有较好的抑制作用,系统整体效率变高,同时可靠性、稳定性变强。

高频链AC-DC矩阵变换器的变控制频率软开关调制策略

针对高频链AC-DC矩阵变换器的高效率要求,提出了一种变控制频率软开关调制策略。该调制策略在基于零矢量嵌入的分段同步控制策略基础上,以单控制周期平均功率不变为原则,通过改变控制周期长度,并调整一个控制周期内的电压矢量排布,优化脉冲宽度,使变换器在换流时全部开关器件的零电压开通成为可能。通过仿真分析和实验证明,采用本文提出的变控制频率调制策略,变换器在整流和逆变模式下,均可实现网侧电流三相平衡正弦,功率因数达到0.981,输出电压纹波小,最高效率达到96.9%,实现了高性能、高效率运行。

能量有效的RIS辅助多用户MISO系统资源分配

可重构智能表面(Reconfigurable Intelligent Surface,RIS)通过改变电磁传播环境来提高无线通信的覆盖范围和容量。然而,RIS技术部署和维护大量的RIS反射元件也会产生大量的能量消耗。基于此,在满足用户的最低速率、基站的最大发射功率以及RIS相位角的单位模数等约束下,研究RIS辅助的多用户多输入单输出(Multiple Input Single Output,MISO)系统中资源优化问题,实现能量效率最大化。具体地,分析多用户下信干噪比(Signal to Interference Noise Ratio,SINR)、系统总功耗与RIS的相位矩阵和开关矩阵的关系;建立以基站的波束赋形、RIS的相位角及开关矩阵为变量的最大化能量效率优化问题;针对优化问题的求解,提出基站端使用最大比发送预编码,使用户接收的SINR最大,并提出一种改进型的粒子群优化(Particle Swarm Optimization,PSO)算法,通过优化RIS的开关矩阵以最小化系统总功耗;进一步设计了相位矩阵、功率和开关矩阵进行交替迭代优化的方案。仿真结果表明,改进型算法得到的最优性能结果比较稳定,特别是在加入开关的系统中,经过优化开关矩阵后获得的系统能量效率相比不带开关的系统提升了约20%,证实了所提方案对系统能量效率提升的有效性。

基于功率切换模型的三相VSC切换控制方法

三相电压源变换器(voltage source converter,VSC)工作过程可视为在不同开关状态(即不同子系统)下的切换,是一种典型的切换系统。基于切换系统理论,提出一种三相电网平衡条件下基于功率切换模型的三相VSC切换控制策略。相较于传统基于线性化模型的三相VSC控制方法,所提方法具有模型精确无近似,控制参数少,控制器实现简单,无需复杂的坐标旋转变换和脉冲宽度调制过程,对于电路参数不确定具有强鲁棒性等优点。相较于传统基于电流切换模型的三相VSC切换控制策略,所提方法具有模型更便于系统分析与切换规则设计且提升了系统延迟条件下系统稳定性等优点。仿真及实验比较结果证明了所提方法的有效性及优越性。

基于自学习的LSTM网络短路电流零点预测方法

短路故障在首个大半波内快速选相开断对提升电力系统稳定性具有重要意义。为此,本文研究并提出了一种基于自学习的长短期记忆(LSTM)网络短路电流零点预测方法。构建了基于自学习优化训练的LSTM短路电流预测模型,并采用循环迭代法对短路电流波形及过零点进行预测;搭建了RTDS试验平台,验证了自学习LSTM网络对零点预测的准确性、快速性以及稳定性;讨论了不同短路故障电流的起始相角、谐波含量、信噪比、衰减直流分量时间常数等因素对自学习LSTM预测精度的影响;仿真与试验结果表明自学习LSTM网络对短路电流零点具有较好的预测能力,当采样时间为3 ms时,自学习LSTM首零点预测精度已与RLS算法采样时间5 ms时预测精度相当,为在首个大半波内实现相控开断提供了依据。

基于GaAs E/D PHEMT工艺的Ku波段双通道幅相控制多功能芯片

基于GaAs增强/耗尽型赝配高电子迁移率晶体管(E/D PHEMT)工艺设计了一款14~18 GHz的双通道多功能芯片。芯片集成了单刀双掷(SPDT)开关、6 bit数控移相器、4 bit数控衰减器和增益补偿放大器。采用正压控制开关以减小控制位数;优化移相、衰减和放大等电路拓扑结构,以获得良好的幅相特性;采用紧凑布局、双通道对称的版图设计,以实现小尺寸和高性能。测试结果表明,+5 V电压下,接收通道增益大于3 dB,1 dB压缩点输出功率大于8 dBm;发射通道增益大于1 dB,1 dB压缩点输出功率大于2 dBm;64态移相均方根误差小于2.5°,16态衰减均方根误差小于0.3 dB,芯片尺寸为3.90 mm×2.25 mm。该多功能芯片可实现对射频信号幅度和相位的高精度控制,可广泛应用于微波收发模块。

永磁同步电机三相矢量双选取预测转矩控制

针对永磁同步电机在占空比模型预测转矩控制下,存在计算量较大、稳态性能不够理想的问题,提出一种三相矢量双选取模型预测转矩控制方法。首先将定子磁链所在空间复平面6个扇区重新划分为3个扇区;其次,设计一种基于三相电压矢量的新型开关表,依据新型电压矢量选择表,从三相电压矢量中选择出两个有效电压矢量,再加入一个零矢量,仅进行一次占空比计算,就可输出任意幅值、相角的期望电压矢量。仿真结果表明,该策略减少了系统计算时间,有效地抑制了转矩和磁链脉动且稳态性能良好。

空中目标动态HRRP特征可重构模拟方法

针对目前无源模拟技术无法实现目标动态电磁特征模拟的问题,提出了一种利用相位调制表面(phase-switched screen, PSS)进行空中目标动态高分辨距离像(high resolution range profile, HRRP)特征可重构的模拟方法。以无人直升机旋翼为例,对旋翼的运动状态进行了建模,并详细分析了其动态HRRP特征。另外,通过建立PSS的周期调制信号模型,详细分析了PSS对雷达入射波的调控效果。在此基础上,提出了一种调制频率时变的PSS可重构模拟方法,该方法能够生成随时间变化的可控谐波分量,模拟产生的谐波分量与无人直升机旋翼的动态HRRP特征变化规律相似。通过仿真数据对比分析,调制频率时变的PSS可重构模拟方法能够实现无人直升机旋翼的动态HRRP特征模拟效果。

定频移相控制六开关双谐振变换器研究

针对传统频率控制的LLC谐振变换器在宽电压应用中电压调节性能差且循环电流较大的问题,设计一种六开关双谐振LLC变换器。该变换器由2个全桥LLC谐振变换器共用1个桥臂混合组成。相较于传统的频率控制,该变换器采用定频移相控制调节输出电压,减小开关频率范围。根据2个变压器连接方式的不同,变换器有2种拓扑形态。当2个变压器顺极性串联时,变换器的增益范围为0~1,可以实现超宽输出电压;当2个变压器反极性串联时,变换器的增益范围为1~2,在工作过程中具有较小的环流损耗。2种拓扑形态下,原边开关管和副边二极管分别实现ZVS开通和ZCS关断。最后,通过Simulink仿真和实验验证了研究内容的有效性。

一种适用三电平并联系统的虚拟矢量调制策略

直流侧中点电位平衡和零序环流抑制是保证三电平逆变器并联系统正常运行的重要问题,然而基于冗余小矢量对调节的环流抑制方案进一步增加空间矢量脉宽调制(space vector pulse width modulation,SVPWM)中点电流无法对称消除的场景,加剧双机系统中点电位不平衡程度。该文基于虚拟矢量合成思路,提出一种满足零序环流抑制和中点电位平衡需求的双机虚拟矢量调制方法。该方法重新定义虚拟中矢量,通过缩短中矢量作用时间和增加参与合成的对称冗余小矢量以减少中点电流不平衡场景;分析不同扇区不同控制目标下虚拟矢量合成规则,利用相占空比法优化虚拟矢量的作用顺序,减少矢量合成过程中的开关次数。与传统SVPWM策略下中点电压变化量的对比分析表明,所提方法能够削弱环流抑制和中点电位平衡的耦合关系。最后,利用Starsim平台实验验证该策略的有效性。

一种单电源九开关二倍升压九电平逆变器

针对现有九电平逆变器存在使用器件较多且调制策略复杂的问题,提出1种新型的开关电容九电平逆变器,其拓扑仅需1个直流电源、9个开关、2个电容和2个二极管即可输出九电平,同时实现二倍升压。该逆变器具有电容电压自平衡的能力,无需复杂的控制算法和外部均压电路来维持电容电压平衡。采用多载波层叠调制策略对该逆变器进行调制,逆变器中4对开关的工作状态互补,可以使用非门逻辑电路来降低调制策略的复杂度。首先对该逆变器的拓扑结构和工作原理进行理论分析;其次,对调制策略进行了详细介绍,并将所提拓扑与其他九电平拓扑进行比较,介绍了该拓扑的优点;最后,搭建的仿真电路和实验平台验证了所提拓扑及调制策略的可行性和有效性。