Machine Learning for Signal Demodulation in Underwater Wireless Optical Communications

The underwater wireless optical communication(UWOC)system has gradually become essential to underwater wireless communication technology.Unlike other existing works on UWOC systems,this paper evaluates the proposed machine learningbased signal demodulation methods through the selfbuilt experimental platform.Based on such a platform,we first construct a real signal dataset with ten modulation methods.Then,we propose a deep belief network(DBN)-based demodulator for feature extraction and multi-class feature classification.We also design an adaptive boosting(Ada Boost)demodulator as an alternative scheme without feature filtering for multiple modulated signals.Finally,it is demonstrated by extensive experimental results that the Ada Boost demodulator significantly outperforms the other algorithms.It also reveals that the demodulator accuracy decreases as the modulation order increases for a fixed received optical power.A higher-order modulation may achieve a higher effective transmission rate when the signal-to-noise ratio(SNR)is higher.

Lensless complex amplitude demodulation based on deep learning in holographic data storage

To increase the storage capacity in holographic data storage(HDS),the information to be stored is encoded into a complex amplitude.Fast and accurate retrieval of amplitude and phase from the reconstructed beam is necessary during data readout in HDS.In this study,we proposed a complex amplitude demodulation method based on deep learning from a single-shot diffraction intensity image and verified it by a non-interferometric lensless experiment demodulating four-level amplitude and four-level phase.By analyzing the correlation between the diffraction intensity features and the amplitude and phase encoding data pages,the inverse problem was decomposed into two backward operators denoted by two convolutional neural networks(CNNs)to demodulate amplitude and phase respectively.The experimental system is simple,stable,and robust,and it only needs a single diffraction image to realize the direct demodulation of both amplitude and phase.To our investigation,this is the first time in HDS that multilevel complex amplitude demodulation is achieved experimentally from one diffraction intensity image without iterations.

Broadband multi-channel quantum noise suppression and phase-sensitive modulation based on entangled beam

We present a theoretical scheme for broadband multi-channel quantum noise suppression and phase-sensitive modulation of continuous variables in a coupled resonant system with quantum entanglement properties.The effects of different coupling strengths,pumping power in suppressing quantum noise and controlling the width of quantum interference channels are analyzed carefully.Furthermore,quantum noise suppression at quadrature amplitude is obtained with phase-sensitive modulation.It shows that the entanglement strength of the output field and the quantum noise suppression effect can be enhanced significantly by a strong pumping filed due to interaction of pumping light with the nonlinear crystal.The full width at half maxima(FWHM)of the noise curve at the resonant peak(△=0 MHz)is broadened up to 2.17 times compared to the single cavity.In the strong coupling resonant system,the FWHM at △=0 MHz(△=±3.1 MHz)is also broadened up to 1.27(3.53)times compared to the weak coupling resonant system case.The multi-channel quantum interference creates an electromagnetically induced transparent-like line shape,which can be used to improve the transmission efficiency and stability of wave packets in quantum information processing and quantum memory.

HARDWARE DEMODULATION METHOD FOR &D EDGEDETEOTION AND ERROR OOMPENSATION

A hardwale demodulation method for 2-D edge detection is proposed. The filtering step and the differential step are implemented by using the hardware circuit. This demodulation circuit simplifies the edgefinder and reduces the measuring cycle. The calibration method of scale setting is also presented,and bymeasuring some calibrated objects,the demodulation errors and the error correction table is obtained.

Demodulation Based on Harmonic Wavelet and Its Application into Rotary Machinery Fault Diagnosis

The harmonic wavelet transform（HWT） and its fast realization based on fast Fourier transform（FFT） are introduced. Its ability to maintain the same amplitude-frequency feature is revealed. A new method to construct the time-frequency（TF） spectrum of HWT is proposed, which makes the HWT TF spectrum able to correctly reflect the time-frequency-amplitude distribution of the signal. A new way to calculate the HWT coefficients is proposed. By zero padding the data taken out, the non-decimated coefficients of HWT are obtained. Theoretical analysis shows that the modulus of the coefficients obtained by the new calculation way and living at a certain scale are the envelope of the component in the corresponding frequency band. By taking the cross section of the new TF spectrum, the demodulation for the component at a certain frequency band can be realized. A comparison with the Hilbert demodulation combined with band-pass filtering is done, which indicates for multi-components, the method proposed here is more suitable since it realizes ideal band-pass filtering and avoids pass band selecting. In the end, it is applied to bearing and gearbox fault diagnosis, and the results reflect that it can effectively extract the fault features in the signal.

Generalized Demodulation Transform for Bearing Fault Diagnosis Under Nonstationary Conditions and Gear Noise Interferences

It is a challenging issue to detect bearing fault under nonstationary conditions and gear noise interferences. Meanwhile, the application of the traditional methods is limited by their deficiencies in the aspect of computational accuracy and e ciency, or dependence on the tachometer. Hence, a new fault diagnosis strategy is proposed to remove gear interferences and spectrum smearing phenomenon without the tachometer and angular resampling technique. In this method, the instantaneous dominant meshing multiple(IDMM) is firstly extracted from the time-frequency representation(TFR) of the raw signal, which can be used to calculate the phase functions(PF) and the frequency points(FP). Next, the resonance frequency band excited by the faulty bearing is obtained by the band-pass filter. Furthermore, based on the PFs, the generalized demodulation transform(GDT) is applied to the envelope of the filtered signal. Finally, the target bearing is diagnosed by matching the peaks in the spectra of demodulated signals with the theoretical FPs. The analysis results of simulated and experimental signal demonstrate that the proposed method is an e ective and reliable tool for bearing fault diagnosis without the tachometer and the angular resampling.

Advances in phase-sensitive optical time-domain reflectometry

Phase-sensitive optical time-domain reflectometry(Φ-OTDR)has attracted numerous attention due to its superior performance in detecting the weak perturbations along the fiber.Relying on the ultra-sensitivity of light phase to the tiny deformation of optical fiber,Φ-OTDR has been treated as a powerful technique with a wide range of applications.It is fundamental to extract the phase of scattering light wave accurately and the methods include coherent detection,I/Q demodulation,3 by 3 coupler,dual probe pulses,and so on.Meanwhile,researchers have also made great efforts to improve the performance ofΦ-OTDR.The frequency response range,the measurement accuracy,the sensing distance,the spatial resolution,and the accuracy of event discrimination,all have been enhanced by various techniques.Furthermore,lots of researches on the applications in various kinds of fields have been carried out,where certain modifications and techniques have been developed.Therefore,Φ-OTDR remains as a booming technique in both researches and applications.

Research and test of the adaptive quadrature demodulation technology for silicon micro-machined gyroscope

A program of adaptive quadrature demodulation is proposed to supply the gaps in the traditional analog detection technology of a silicon micro-machined gyroscope (SMG). This program is suitable for digital phase locked loop (DPLL) drive technology that proposed in other papers. In addition the program adopts an adaptive filtering algorithm, which selects the in-phase and quadrature components that are outputs of the DPLL of the SMG's drive mode as reference signals to update the amplitude of the in-phase and quadrature components of the input signal by iteratively. An objective of the program is to minimize the mean square error of the accurate amplitudes and the estimated amplitudes of SMG's detection mode. The simulation and test results prove the feasibility of the program that lays the foundation for the further improvement of the SMG's system performance and the implementation of the SMG system's self-calibration and self-demarcation in future.

Demodulation System for Fiber Bragg Grating Sensors Using Digital Filtering Technique

A discrimination measurement method and demodulation technique for fiber Bragg grating (FBG) sensors were presented using digital filtering technique. The system can control a tunable fiber Fabry-Perot filter with sawtooth wave voltage generated by digital clock to interrogate FBG sensors. Using the analogue digital converter (ADC), the reflected FBG signals were sampled with synchronous digital clock. With the aid of digital matched filtering technique, the sampled FBG signals were processed to obtain the maximum signal-to-noise ratio (SNR) and the Bragg wavelength shift from the FBG signals was recovered. The results demonstrate that this system has a scanning range of 1 520 nm-1 575 nm,and the wavelength detection accuracy is less than 2 pm with 1.5 Hz scanning frequency.

Demodulation of acoustic telemetry binary phase shift keying signal based on high-order Duffing system

In order to grasp the downhole situation immediately, logging while drilling(LWD) technology is adopted. One of the LWD technologies, called acoustic telemetry, can be successfully applied to modern drilling. It is critical for acoustic telemetry technology that the signal is successfully transmitted to the ground. In this paper, binary phase shift keying(BPSK) is used to modulate carrier waves for the transmission and a new BPSK demodulation scheme based on Duffing chaos is investigated. Firstly, a high-order system is given in order to enhance the signal detection capability and it is realized through building a virtual circuit using an electronic workbench(EWB). Secondly, a new BPSK demodulation scheme is proposed based on the intermittent chaos phenomena of the new Duffing system. Finally, a system variable crossing zero-point equidistance method is proposed to obtain the phase difference between the system and the BPSK signal. Then it is determined that the digital signal transmitted from the bottom of the well is ‘0’ or ‘1’. The simulation results show that the demodulation method is feasible.

Design of Demodulation System of Interferometric Sensor Based on Labview

For the modified demodulation arithmetic of 3×3 coupler, the processing software built on the basis of Labview is able to demodulate asymmetric 3×3 coupler signal and do further spectrum analysis. It shows that the measured frequency ranges from 10 Hz to 1 000 Hz and phase range is covered by -10 rad^10 rad. The phase sensitivity is 0.5 V/rad. This system is proved to show high resolution and wide dynamic range.

Amplitude and Phase Analysis Based on Signed Demodulation for AM-FM Signal

This paper proposes a new amplitude and phase demodulation scheme different from the traditional method for AM-FM signals. The traditional amplitude demodulation assumes that the amplitude should be non-negative, and the phase is obtained under the case of non-negative amplitude, which approximates the true amplitude and phase but distorts the true amplitude and phase in some cases. In this paper we assume that the amplitude is signed (zero, positive or negative), and the phase is obtained under the case of signed amplitude by optimization, as is called signed demodulation. The main merit of the signed demodulation lies in the revelation of senseful physi- cal meaning on phase and frequency. Experiments on the real-world data show the efficiency of the method.

New cooperative frequency domain differential modulation and demodulation

An innovative method of cooperative frequency domain differential modulation and demodulation is presented.This method applies the prior knowledge of channel propagation to selecting the variable differential length and carrying out frequency domain modulation.This strategy optimizes the design of system parameters to effectively improve the anti-interference ability of the differential system in time-varied multipath channel circumstance without making the execution more complicating.The simulations and comparisons demonstrate the proposed method is effective,and the results show that it is especially suitable for the fading channel with strong propagation and fast time-variation.

Phase-sensitive fat suppression steady-state free procession sequence with phase correction

Robust and fast fat suppression is a challenge in balanced steady-state free precession （SSFP） magnetic resonance imaging. Although single-acquisition phase-sensitive SSFP can provide fat-suppressed images in short scan time, phase errors, especially spatially-dependent phase shift, caused by a variety of factors may result in misplacement of fat and water voxels. In this paper, a novel phase correction algorithm was used to calibrate those phase errors during image reconstruction. This algorithm corrects phase by region growing, employing both the magnitude and the phase information of image pixels. Phantom and in vivo imagings were performed to validate the technique. As a result, excellent fat-suppressed images were acquired by using single-acquisition phase-sensitive SSFP with phase correction.

Delay enhancement patterns in apical hypertrophic cardiomyopathy by phase-sensitive inversion recovery sequence

Objective:Late gadolinium enhancement(LGE) patterns of cardiovascular magnetic resonance (CMR) relying on PSIR(phase-sensitive inversion recovery sequence) techniques had been used to determine the characteristics of LGE in apical hypertrophic cardiomyopathy(ApHCM). Methods:Forty patients pure ApHCM[age,(60.2±10.4) years,31 men]were enrolled.LGE images were acquired using PSIR,and analyzed using a 17-segment model.Summing the LGE areas in all short axis slices yielded the total volume of late enhancement,which was subsequently presented as a proportion of total LV myocardium(%LGE).Results:Mean maximal apical wall thickness was(17.9±2.3) mm,and mean left ventricular(LV) ejection fraction was(67.7±8.0)%.LGE was detected in 130 segments of 30 patients(75.0%),occupying(4.9±5.5)% of LV myocardium.LGE was mainly detected at the junction between left and right ventricles in 12(30%) and at the apex in 28(70%),although LGE-positive areas were widely distributed,and not limited to the apex.Focal LGE at the non-hypertrophic LV segments was found in some ApHCM patients,even without LGE of hypertrophied apical segments.Conclusions:LGE was frequently observed not only in the thickened apex of the heart but also in other LV segments,irrespective of the presence or absence of hypertrophy.The simple presence of LGE on CMR was not representative of adverse prognosis in this population.

Demodulation spectrum analysis for multi-fault diagnosis of rolling bearing via chirplet path pursuit

The vibration signals of multi-fault rolling bearings under nonstationary conditions are characterized by intricate modulation features,making it difficult to identify the fault characteristic frequency.To remove the time-varying behavior caused by speed fluctuation,the phase function of target component is necessary.However,the frequency components induced by different faults interfere with each other.More importantly,the complex sideband clusters around the characteristic frequency further hinder the spectrum interpretation.As such,we propose a demodulation spectrum analysis method for multi-fault bearing detection via chirplet path pursuit.First,the envelope signal is obtained by applying Hilbert transform to the raw signal.Second,the characteristic frequency is extracted via chirplet path pursuit,and the other underlying components are calculated by the characteristic coefficient.Then,the energy factors of all components are determined according to the time-varying behavior of instantaneous frequency.Next,the final demodulated signal is obtained by iteratively applying generalized demodulation with tunable E-factor and then the band pass filter is designed to separate the demodulated component.Finally,the fault pattern can be identified by matching the prominent peaks in the demodulation spectrum with the theoretical characteristic frequencies.The method is validated by simulated and experimental signals.

Phase-Sensitive Optical Time-Domain Reflectometer Based on a 120°-Phase-Difference Michelson Interferometer

A phase-sensitive optical time domain reflectometer （φ-OTDR） based on a 120°-phase-difference Michelson in- terferometer is proposed. The Michelson interferometer with arm difference of 4m is used to test the phase difference between the Rayleigh scattering from two sections of the fiber. A new demodulation method called the inverse transmission matrix demodulation scheme is utilized to demodulate the distributed phase from the backward scattering along the long fiber, The experimental results show that the 120°-phase-difference inter- ferometer φ-OTDR can detect the phase along the 3km fiber, and the acoustic signal within the whole human hearing range of 20 Hz-20 kHz is reproduced accurately and quickly.

Combined iterative cross-correlation demodulation scheme for mixing space borne automatic identification system signals

Aiming at the potential presence of mixing automatic identification system(AIS) signals,a new demodulation scheme was proposed for separating other interfering signals in satellite systems.The combined iterative cross-correlation demodulation scheme,referred to as CICCD,yielded a set of single short signals based on the prior information of AIS,after the frequency,code rate and modulation index were estimated.It demodulates the corresponding short codes according to the maximum peak of cross-correlation,which is simple and easy to implement.Numerical simulations show that the bit error rate of proposed algorithm improves by about 40% compared with existing ones,and about 3 dB beyond the standard AIS receiver.In addition,the proposed demodulation scheme shows the satisfying performance and engineering value in mixing AIS environment and can also perform well in low signal-to-noise conditions.

Robust Non-Coherent Demodulation Scheme for Bluetooth Voice Transmission Using Linear, Extended, and Unscented Kalman Filtering

This paper presents a novel and cost effective method to be used in the optimization of the Gaussian Frequency Shift Keying (GFSK) at the receiver of the Bluetooth communication system. The proposed method enhances the performance of the noncoherent demodulation schemes by improving the Bit Error Rate (BER) and Frame Error Rate (FER) outcomes. Linear, Extended, and Unscented Kalman Filters are utilized in this technique. A simulation model, using Simulink, has been created to simulate the Bluetooth voice transmission system with the integrated filters. Results have shown improvements in the BER and FER, and that the Unscented Kalman Filters (UKF) have shown superior performance in comparison to the linear Kalman Filter (KF) and the Extended Kalman Filter (EKF). To the best of our knowledge, this research is the first to propose the usage of the UKF in the optimization of the Bluetooth System receivers in the presence of additive white Gaussian noise (AWGN), as well as interferences.

A Fast π/4-DQPSK Demodulation Arithmetic and Realization

The modulated signals of π /4-DQPSK can be demodulated with the differenced method, and the technology has been used in the communication. The traditional demodulated method needs a lot of calculation. In this paper, a new method based on fast arithmetic digital demodulation of DQPSK is presented. The new method only uses the sign of the modulated signal instead of digital signal through the A/D in the traditional method. With the new method, the system has higher speed, and can save some hardware in the FPGA. An experiment of the new method with the DQPSK is given in this paper.