A 27 GHz,simple 2-bit 1×8 phased array

This study demonstrates a simple 2-bit phased array operating at 27 GHz that supports one-dimensional beam scanning with left-handed circular polarization(LHCP).The antenna is constructed using a compact four-layer printed circuit board(PCB)structure,consisting of a 90°phase shifter layer with microstrip structures,a ground(GND)layer,a direct current(DC)control layer,and a circularly polarized annular radiation patch layer with 1-bit phase shifting.Based on the proposed unit structure,a 1×8 array with half-wavelength inter-element spacing was designed and validated.Experimental results show that the array achieves a peak gain of 10.23 dBi and is capable of beam scanning within±50°.

Performance analysis of the mutual coupling effect on Phased Array Feeds

A phased array feed(PAF)is a type of receiving array that places phased array antennas on the focal plane of a radio telescope to expand its field of view and improve observation efficiency.Owing to the mutual coupling effect between elements caused by a tightly arranged feed array,which changes the performance of a PAF,this paper presents a 7×7 rectangular feed array model for a 25 m reflector telescope.By adjusting the element spacings,the performance of a PAF with different spacings is comprehensively analyzed with respect to the mutual coupling effect via performance statistics and comparison.This research aims to provide a reference for the preliminary design of a related PAF.

Characterization and Application of S-Band Polarimetric Radar and X-Band Phased Array Radar for a Tornadic Storm Event on June 16,2022

The X-band phased array radar offers faster scanning speed and higher spatial resolution compared to the S-band radar,making it capable of enhancing tornado monitoring and early warning capabilities.This study analyzed the characteristics and nowcasting signals of a tornado case that occurred on June 16,2022 in the Guangzhou region.Our findings indicate that the violent contraction of rotation radius and the dramatic increase in rotation speed were important signal characteristics associated with tornado formation.The X-band phased array radar,with its high temporal and spatial resolution,provided an opportunity to capture early warning signals from polarimetric characteristics.The X-band phased array radar demonstrated noteworthy ability to identify apparent tornado vortex signature(TVS)features in a 10-minute lead time,surpassing the capabilities of the CINRAD/SA radar.Additionally,due to its higher scanning frequency,the Xband phased-array radar was capable of consistently identifying TVS with shorter intervals,enabling a more precise tracking of the tornado's path.The application of professional radars,in this case,provides valuable insights for the monitoring of evolutions of severe local storms and even tornadoes and the issuance of early warning signals.

Quantitative Precipitation Estimation Using X-band Phased Array Weather Radar

This study utilized data from an X-band phased array weather radar and ground-based rain gauge observations to conduct a quantitative precipitation estimation(QPE)analysis of a heavy rainfall event in Xiong an New Area from 20:00 on August 21 to 07:00 on August 22,2022.The analysis applied the Z-R relationship method for radar-based precipitation estimation and evaluated the QPE algorithm s performance using scatter density plots and binary classification scores.The results indicated that the QPE algorithm accurately estimates light to moderate rainfall but significantly underestimates heavy rainfall.The study identified disparities in the predictive accuracy of the QPE algorithm across various precipitation intensity ranges,offering essential insights for the further refinement of QPE techniques.

The phased chromosome-scale genome of yellowhorn sheds light on the mechanism of petal color change

Yellowhorn(Xanthoceras sorbifolium), especially its varieties, is the red petal yellowhorn(X. sorbifolium var. purpurea), an important tree species with great ornamental value, and its flower petals change color throughout the flowering period. In this study, we mainly focused on the mechanism of the petal color change with transcriptomics and metabolomics data. A phased chromosome-scale assembly of the red petal yellowhorn genome was generated using the PacBio high-fidelity reads, Illumina short reads, and Phase genomics Proximo Hi-C data. The final de novo assembly yielded 533.67 Mb with a contig N50 of 5.42 Mb, and 27 501 protein-coding genes were predicted. Notably, an alternate haplotig assembly was also obtained. Furthermore, a variation database for the alleles within the genome was constructed. Subsequently, the expression pattern of flower pigmentation-related genes and allelic expression imbalance events were investigated. Apart from 6 genes involved in the anthocyanin biosynthesis pathway regulated by the activation of 15 MYB-bHLH-WD40s, the increased expression of senescencerelated gene 1(SRG1) and 2-oxoglutarate-dependent dioxygenase(DIOX5) might also result in decreasing content of lutein and increasing abundance of(E/Z)-phytoene, cyanidin-3-O-rutinoside, and cyanidin-3-O-sambubioside. These changes in genes and metabolites were most likely related to the petal color change in red petal yellowhorn. This phased chromosome-scale genome assembly provides more accurate genomic information for future molecular breeding and facilitates allele function studies of the red petal yellowhorn.

Design of Ka-Band Phased Array Antenna with Calibration Function

In this paper,we have proposed a novel structure of Ka-band based phased array antenna with calibration function.In the design of Kaband antenna,the active phased array system is adopted and the antenna would work in the dual polarization separation mode.We have given out the schematic diagram for the proposed Ka-band antenna,where the Kaband antenna is in the form of waveguide slot array antenna,with 96 units in azimuth and 1 unit in distance.Each group of units is driven by a singlechannel Transmitter/Receiver(T/R)component,and the whole array contains 192 T/R components in total.The size of the T/R component is 55mm(length)×50mm(width)×5.8mm(height),3 Sub-micro Sub-Miniature Push-on(SSMP)blind sockets and a 21-core low-frequency socket are designed on the two sides of the T/R component.In order to meet the technical specifications of phased array antenna,the Ka-band transceiver component is designed based on Low Temperatrue Co-fired Ceramic(LTCC)technology to achieve miniaturization and lightweight.In our approach,the feed network includes two parts:transceiver network and calibration network.The transceiver network consists of 241:8 time-delay power dividers,12 two-way power dividers and 2 six-way time-delay power dividers.The power supply required by theKaband antenna unit is provided to each active component by the power module after Ka band wavelet control distribution.Simulation and measurement results are given in the form of standing wave and scanning capability.

Effects of Early-stage Phased Rehabilitation Training on Acute Respiratory Distress Syndrome:A Systematic Review and Meta-analysis

[Objectives]To systematically evaluate the effects of early-stage phased rehabilitation training on the oxygenation index,ICU length of stay,duration of mechanical ventilation,and occurrence of complications(ventilator-associated pneumonia,pressure ulcers,delirium)in ARDS patients,thus contributing evidence for the clinical application of early-stage phased rehabilitation training.[Methods]The China National Knowledge Infrastructure(CNKI),Wanfang,and other databases were searched.Literature screening,data extraction,and systematic analysis of the included studies were performed using Revman software.[Results]Thirteen randomized controlled trials involving a total of 860 patients were included in this review.The results of the meta-analysis showed that compared to the traditional rehabilitation training group,the early-stage phased rehabilitation training group demonstrated a significant increase in the oxygenation index of ARDS patients[SMD=1.18,95%CI(1.01,1.35),P<0.01],with statistically significant differences.Furthermore,there were significant reductions in ICU length of stay[SMD=-0.70,95%CI(-0.90,-0.50),P<0.01],duration of mechanical ventilation[SMD=-1.15,95%CI(-1.36,-0.94),P<0.01],and occurrence of complications[OR=0.16,95%CI(0.10,0.26),P<0.01],all of which were statistically significant.[Conclusions]Early-stage phased pulmonary rehabilitation training for ARDS patients effectively improves the oxygenation index,shortens ICU length of stay and duration of mechanical ventilation,and reduces complications.These findings support the clinical application and promotion of early-stage phased rehabilitation training.

Phase aberration correction in ultrasonic phased array non-destructive testing systems

Phase aberration correction for medical ultrasound systems has attracted a great deal of attention. Since phased array techniques are now widely employed for industrial non-destructive testing （NDT） applications in various fields, the problem of phase aberrations in the process of NDT testing is considered. The technique of cross-covariance for phase aberration correction is presented. The performance of the technique for phase aberration correction is tested by means of echo signals obtained in practical non-destructive testing experiment. The results show that the technique has the better accuracy of phase correction.

Model and optimization of ultrasonic phased array parameters

Beam focusing is one of the unique characteristics of ultrasonic phased array compared with conventional ultrasound.On the basis of two-dimensional radiated sound field of phased array,the three-dimensional radiated sound field was simulated in the paper,and then the effect of different frequencies,different number of array elements and different element spacings on focal spot,the depth of focus and the effect on horizontal and vertical resolution were analyzed.The optimal results of transducer parameters have certain reference value for the design of phased array probe.

Dwell scheduling algorithm for multifunction phased array radars based on the scheduling gain

A real-time dwell scheduling model, which takes the time and energy constraints into account is founded from the viewpoint of scheduling gain. Scheduling design is turned into a nonlinear programming procedure. The real-time dwell scheduling algorithm based on the scheduling gain is presented with the help of two heuristic rules. The simulation results demonstrate that compared with the conventional adaptive scheduling method, the algorithm proposed not only increases the scheduling gain and the time utility but also decreases the task drop rate.

Numerical simulation of an acoustic field generated by a phased arc array in a fluid-filled cased borehole

Transducers that are widely applied in cement bond evaluation tools, such as cement bond logs and variable density logs, cannot radiate acoustic energy directionally because of the characteristics of monopole sources. A phased arc array transmitter, which is a novel transducer that differs from monopole and dipole transducers, is presented in this study. To simulate the acoustic field generated by a phased arc array in a fluid-filled cased borehole with different channelings, a 3D finite-difference time-domain method is adopted. The acoustic field generated by a traditional monopole source is also simulated and compared with the field generated by the phased arc array transmitter. Numerical simulation results show that the phased arc array radiates energy directionally in a narrow angular range in the borehole, thereby compressing the acoustic energy into a narrow range in the casing pipe, the cement, and the formation. We present the analyses of first-arrival waveforms and the amplitudes of casing waves at different azimuthal angles for the two different sources. The results indicate that employing a directional source facilitates azimuthal identification and analysis of possible channeling behind the casing pipe.

Spectral Coexistence between LEO and GEO Satellites by Optimizing Direction Normal of Phased Array Antennas

This paper addresses the spectral coexistence between LEO constellation and GEO belt for global distributed earth stations. A specific method is introduced to mitigate the in-line interference by tilting the direction normal of phased array antennas of LEO satellites, and the optimal direction is found by solving a non-linear programming problem. The simulation results prove that the proposed approach leads to greater link availability while guaranteeing the desired received signal level especially for low-latitude earth stations.

Analysis of electrical performances of planar active phased array antennas with distorted array plane

The influence of the distorted plane of the active phased array antenna on the electromagnetic performance is of great significance to the research on and development of the high-performance antennas. On the bent and bowl-shape distortion, the model is established of the relationship between the electromagnetic performance and the position error of the radiated elements. The method is presented of analyzing the far-field pattern of the distorted rectangular active phased array antenna. The analysis results of a planar phased array antenna with different distortions grades prove the validity of the model. Therefore, by the method, the antenna designers may set the reasonable requirement on the structural tolerance in manufacturing antenna.

Low side lobe pattern synthesis using projection method with genetic algorithm for truncated cone conformal phased arrays

A hybrid method for synthesizing antenna＇s three dimensional （3D） pattern is proposed to obtain the low sidelobe feature of truncated cone conformal phased arrays. In this method, the elements of truncated cone conformal phased arrays are projected to the tangent plane in one generatrix of the truncated cone. Then two dimensional （2D） Chebyshev amplitude distribution optimization is respectively used in two mutual vertical directions of the tangent plane. According to the location of the elements, the excitation current amplitude distribution of each element on the conformal structure is derived reversely, then the excitation current amplitude is further optimized by using the genetic algorithm （GA）. A truncated cone problem with 8x8 elements on it, and a 3D pattern desired side lobe level （SLL） up to 35 dB, is studied. By using the hybrid method, the optimal goal is accomplished with acceptable CPU time, which indicates that this hybrid method for the low sidelobe synthesis is feasible.

Numerical simulation of an acoustic field generated by a phased arc array in a fluid-filled borehole

The acoustic tools widely used in borehole well logging and being developed in borehole acoustic reflection imaging do not have the function of azimuthal measurement due to a symmetric source, so they can not be used to evaluate the azimuthal character of borehole formation. In this paper, a 3D finite difference method was used to simulate the acoustic fields in a fluid-filled borehole generated by a traditional monopole source and a phased arc array. Acoustic waveforms were presented for both cases. The analysis of the simulated waveforms showed that different from the monopole source, the acoustic energy generated by the phased arc array transmitter mainly radiated to the borehole in a narrow azimuthal range, which was the key technique to implement azimuthal acoustic well logging. Similar to the monopole source, the waveforms generated by the phased arc array in the fluid-filled borehole also contain compressional （P） waves and shear （S） waves refracted along the borehole, which is the theoretical foundation of phased arc array acoustic well logging.

Study of ultrasonic phased array inspection imaging technology for NDT

A research about the ultrasonic phased array imaging principle from A-scan signal to B-scan image for non-destructive testing （NDT） was conducted in this paper, the ultrasonic phased array inspection imaging system used in industrial field was developed and the experiment was performed on the steel testing block by the system with 64 elements, 5 MHz phased array transducer. Experimental results show that the flaws could be accurately detected and the flaws size could be estimated from the B-scan images, and the B-scan images could clearly show the location of the flaws, but the quality of B-scan images needs to be enhanced by digital signal processing and controlling dynamic focusing for improving the image resolution.

Novel cued search strategy based on information gain for phased array radar

A search strategy based on the maximal information gain principle is presented for the cued search of phased array radars. First, the method for the determination of the cued search region, arrangement of beam positions, and the calculation of the prior probability distribution of each beam position is discussed. And then, two search algorithms based on information gain are proposed using Shannon entropy and Kullback-Leibler entropy, respectively. With the proposed strategy, the information gain of each beam position is predicted before the radar detection, and the observation is made in the beam position with the maximal information gain. Compared with the conventional method of sequential search and confirm search, simulation results show that the proposed search strategy can distinctly improve the search performance and save radar time resources with the same given detection probability.

Simulation of acoustic fields emitted by ultrasonic phased array in austenitic steel weld

Ultrasonic inspection of austenitic steel weld is a great challenge due to skewed and distorted beam in such a highly anisotropic and inhomogeneous material. To improve the ultrasonic measurement in this situation, it is essential to have an in-depth understanding of ultrasound characteristics in austenitic steel weld. To meet such a need, in the present study we propose a method which combines the weld model, Dijkstra’s path-finding algorithm and Gaussian beam equivalent point source model to calculate the acoustic fields from ultrasonic phased array in such a weld. With this method, the acoustic field in a steel-austenitic weld-steel three-layered structure for a linear phase array transducer is calculated and the propagation characteristics of ultrasound in weld are studied. The research results show that the method proposed here is capable of calculating the acoustic field in austenitic weld. Additionally, beam steering and focusing can be still realized in the austenitic steel weld and the beam distortion is more severe in the middle of weld than at other positions.

Ultrasonic Scattered Field Distribution of One and Two Cylindrical Solids with Phased Array Technique

The scattered fields of plane waves in a solid from a cylinder or sphere are critical in determining its acoustic characteristics as well as in engineering applications. This paper investigates the scattered field distributions of different incident waves created by elastic cylinders embedded in an elastic isotropic medium. Scattered waves, including longitudinal and transverse waves both inside and outside the cylinder, are described with specific modalities under an incident plane wave. A model with a scatterer embedded in a structural steel matrix and filled with aluminum is developed for comparison with the theoretical solution. The frequency of the plane wave ranged from 235 kHz to 2348 kHz, which corresponds to scaling factors from 0.5 to 5. Scattered field distributions in matrix materials blocked by an elastic cylindrical solid have been obtained by simulation or calculated using existing parameters. The simulation results are in good agreement with the theoretical solution, which supports the correctness of the simulation analysis. Furthermore, ultrasonic phased arrays are used to study scattered fields by changing the characteristics of the incident wave. On this foundation, a partial preliminary study of the scattered field distribution of double cylinders in a solid has been carried out, and the scattered field distribution at a given distance has been found to exhibit particular behaviors at different moments. Further studies on directivities and scattered fields are expected to improve the quantification of scattered images in isotropic solid materials by the phased array technique.

Design and Realization of Phased Array Radar Optical Fiber Transmission System

One optical fiber transmission system is designed. The modularization optical fiber transmission adapters were utilized in the system, so the system structure could be flexibly sealable. The sub-array adapter and signal processor adapter were designed and realized utilizing the new field programmable gate array （FP- GA） which could drive the optical transceiver. The transmission agreement was designed based on the data stream. In order to solve the signal synchronization problem of the optical fiber transmitted phased array radar, a method named synchronous clock was designed. The fiber transmission error code rate of the system was zero with an experimental transmission velocity of 800 Mbit/s. The phased array radar system has detected the airplane target, thus validated the feasibility of the design method.