Phenol Oxidation by Combined Cavitation Water Jet and Hydrogen Peroxide

The paper presents results of phenol oxidized under the conditions of high temperature created during collapse of cavitation bubbles.The degradation efficiency has been greatly improved by using cavitation water jets combined with H2O2 as demonstrated in laboratory tests.Various factors affecting phenol removal ratio were ex-amined and the degradation mechanism was revealed by high performance liquid chromatography(HPLC).The re-sults showed that 99.85% of phenol was mineralized when phenol concentration was 100 mg·L-1 with pH value of 3.0,H2O2 concentration of 300 mg·L-1,confining pressure of 0.5 MPa,and pumping pressure of 20 MPa.The in-termediate products after phenol oxidation were composed of catechol,hydroquinone and p-benzoquinone.Finally,phenol was degraded into maleic acid and acetic acid.Furthermore,a dynamic model of phenol oxidation via cavi-tation water jets combined with H2O2 has been developed.

Coking and Deactivation of Catalyst Inhibited by Silanization Modification in Oxidation of Benzene to Phenol with Nitrous Oxide

The main cause to the deactivation of ZSM-5 catalyst, used for oxidation of benzene to phenol (BTOP) by nitrous oxide, is that the carbon deposition on the catalyst surface blocks the mouth of pores of the catalyst.In the experiments, ZSM-5 catalyst was modified by chemical surface deposition of silicon, and then the effect of modification condition on the catalyst activation was studied. The catalyst samples were characterized by XRF,EPS, XRD, TEM, N2 adsorption at low temperature, pyridine adsorption-infrared technique and etc. All the above results show that the uniform SiO2 membrane can be formed on ZSM-5 crystal surface. The SiO2 membrane covers the acid centers on ZSM-5 surface to inhibit surface coking, to avoid or decrease the possibility of ZSM-5 pore blockage so that the catalyst activity and stability can be improved efficiently. The optimum siliconiting conditions determined by the experiments are as follows: 4% load of silanizing agent, volume (ml)/mass (g) ratio of hexane/ZSM-5=15/1, and 16 h of modification time. Compared with the samples without siliconiting treatment,the samples treated under the above optimum condition can increase the productivity of phenol by 14% for 3 h reaction time and by 41% for 6 h reaction time respectively.

Graphite oxide-catalyzed acetylation of alcohols and phenols

Graphite oxide （GO） was used as a catalyst for the reactions of alcohols and phenols with acetic anhydride. The acetates of primary and secondary alcohols were prepared in good to excellent yields in short reaction time under mild conditions. Electron deficient phenols could be converted to the corresponding acetates steadily. As an efficient catalyst, GO is easily available, cheap, moderately toxic and weakly acidic.

Metal-free synthesis of substituted phenols from arylboronic acids in water at room temperature

A convenient,efficient and practical metal-free method for the synthesis of substituted phenols from arylboronic acids has been developed.The protocol uses hydrogen peroxide as a hydroxylating agent ammonium bicarbonate as an additive,and the reactions were conveniently performed in water at room temperature.The method shows an excellent tolerance of functional groups,so it will find a wide variety of applications in academic and industrial research.

Nitrogen-doped graphene nanosheets as reactive water purification membranes

Oxidation of organic pollutants by sulfate radicals produced via activation of persulfate has emerged as a promising advanced oxidation technology to address various challenging environmental issues. The development of an effective, environmentally-friendly, metal-free catalyst is the key to this technology. Additionally, a supported catalyst design is more advantageous than conventional suspended powder catalysts from the point of view of mass transfer and practical engineering applications （e.g. post-use separation）. In this study, a metal-free N-doped reduced graphene oxide （N-rGO） catalyst was prepared via a facile hydrothermal method. N-rGO filters were then synthesized by facile vacuum filtration, such that water can flow through nanochannels within the filters. Various advanced characterization techniques were employed to obtain structural and compositional information of the as-synthesized N-rGO filters. An optimized phenol oxidative flux of 0.036 ＋_ 0.002 mmol.h ~ was obtained by metal-flee catalytic activation of persulfate at an influent persulfate concentration of 1.0 mmol-L 1 and filter weight of 15 rag, while a N-free rGO filter demonstrated negligible phenol oxidation capability under similar conditions. Compared to a conventional batch system, the flow-through design demonstrates obviously enhanced oxidation kinetics （0.036 vs. 0.010 retool-h-I）, mainly due to the liquid flow through the filter leading to convection-enhanced transfer of the target molecule to the filter active sites. Overall, the results exemplified the advantages of organic compound removal by catalytic activation of persulfate using a metal-free catalyst in flow- through mode, and demonstrated the potential of N-rGO filters for practical environmental applications.