Sonoluminescence is more distinctly observed in phosphoric and sulfuric acid,which exhibit high viscosity and lower vapor pressures relative to water.Within an 85-wt%phosphoric acid solution saturated with argon(Ar),v...Sonoluminescence is more distinctly observed in phosphoric and sulfuric acid,which exhibit high viscosity and lower vapor pressures relative to water.Within an 85-wt%phosphoric acid solution saturated with argon(Ar),variations in the light-emitting regimes of bubbles were noted to correspond with increments in the driving acoustic intensity.Specifically,the bubbles were observed to perform a dance-like motion 2 cm below the multi-bubble sonoluminescence(MBSL)cluster,traversing a 25-mm^(2) grid during the camera exposure period.Spectral analysis conducted at the beginning of the experiment showed a gradual attenuation of CN(B^(2)S–X^(2)S)emission concurrent with a strengthening of Ar(4p–4s)atom emission lines.The application of a theoretical temperature model to the spectral data revealed that the internal temperature of the bubbles escalates swiftly upon their implosion.This study is instrumental in advancing the comprehension of the underlying mechanisms of sonoluminescence and in the formulation of a dynamic model for the behavior of the bubbles.展开更多
In a rotary kiln process for phosphoric acid production,the reaction between gaseous phosphorus pentoxide(P2O5)and phosphate ore and silica contained in feed balls(the so-called P2O5"absorption")not only reduces...In a rotary kiln process for phosphoric acid production,the reaction between gaseous phosphorus pentoxide(P2O5)and phosphate ore and silica contained in feed balls(the so-called P2O5"absorption")not only reduces phosphorous recovery but also generates a large amount of low melting-point side products.The products may give rise to formation of kiln ring,which interferes with kiln operation performance.In this study,the reactions of gaseous P2O5with solid calcium phosphate(Ca3(PO4)2),silica(SiO2)and their mixture,respectively,were investigated via combined chemical analysis and various characterizations comprised of X-ray diffraction(XRD),Fourier-transform infrared(FT-IR)spectroscopy,thermogravimetric analysis and differential scanning calorimeter(TG&DSC),and scanning electron microscopy and energy dispersive spectrometer(SEM&EDS).Attentions were focused on apparent morphology,phase transformation and thermal stability of the products of the P2O5"absorption"at different temperatures.The results show that the temperature significantly affected the"absorption".The reaction between pure Ca3(PO4)2 and P2O5 occurred at 500℃.Calcium metaphosphate(Ca(PO3)2)was the primary product at the temperatures≤900℃ with its melting point≤900℃ while calcium pyrophosphate(Ca2P2O7)was obtained over 1000℃,which has a melting point≤1200℃.The"absorption"by pure SiO2 started at 800℃ and the most significant reaction occurred at 1000℃ with formation of silicon pyrophosphate(SiP2O7)product of melting point≤1000℃.Using mixed Ca3(PO4)2and SiO2as raw material,the"absorption"by Ca3(PO4)2 was enhanced due to existence of silica.At 600–700℃,silica was inert to P2O5and thus formed a porous structure in the raw material,which accelerated diffusion of gaseous P2O5inside the mixture.At higher temperatures,the combined"absorption"by calcium phosphate and reaction between silicon dioxide and the"absorption"product calcium pyrophosphate,reinforced the"absorption"by the mixture.Besides,it was found that both Ca(PO3)2and SiP2O7were unstable at high temperatures and would decompose to Ca2P2O7and SiO2,respectively,at over 1000℃ and 1100℃ with the release of gaseous P2O5at the same time.展开更多
Heteropoly acid H3PW12040 (PW) has been used as an effective catalyst for the synthesis of thieno[2,3-d]pyrimidin-4(3H)-one derivatives. The present methodology offers several advantages, such as high yields, shor...Heteropoly acid H3PW12040 (PW) has been used as an effective catalyst for the synthesis of thieno[2,3-d]pyrimidin-4(3H)-one derivatives. The present methodology offers several advantages, such as high yields, short reaction times, mild reaction condition and a recyclable catalyst with a very easy work up.展开更多
A comparison between the effects of ordinary walnut shell and phosphoric acid modified walnut shell on adsorption of Cr(Ⅵ) was carried out. The experimental results showed that owing to larger surface void of modif...A comparison between the effects of ordinary walnut shell and phosphoric acid modified walnut shell on adsorption of Cr(Ⅵ) was carried out. The experimental results showed that owing to larger surface void of modified walnut shell its adsorption of Cr(Ⅵ) was better. When the temperature was 35 ℃, adsorbent particle size was 1.0-1.6 mm, shaker shock rate was 200 r/min, and dosage of walnut shell was 0.80 g, the Cr(Ⅵ) removal rate reached 99.4%. The fitting of adsorption isotherm and kinetics model showed that, Langmuir isotherm model could reflect the adsorption process of modified walnut shell; and both the adsorption processes of ordinary and modified walnut shells accorded with the pseudo-second-order kinetic equations.展开更多
Laboratory batch experiments were conducted to study arsenic (As) removal from a naturally contaminated soil using phosphoric acid (H3PO4) and potassium dihydrogen phosphate (KHEPO4). Both H3PO4 and KHEPO4 prove...Laboratory batch experiments were conducted to study arsenic (As) removal from a naturally contaminated soil using phosphoric acid (H3PO4) and potassium dihydrogen phosphate (KHEPO4). Both H3PO4 and KHEPO4 proved to reduce toxicity of the soil in terms of soil As content, attaining more than 20% As removal at a concentration of 200 mmol/L. At the same time, acidification of soil and dissolution of soil components (Ca, Mg, and Si) resulted from using these two extractants, especially H3PO4. The effectiveness of these two extractants could be attributed to the replacement of As by phosphate ions (PO4^3-). The function of H3PO4 as an acid to dissolve soil components had little effects on As removal. KH2PO4 almost removed as much As as H3PO4, but it did not result in serious damage to soils, indicating that it was a more promising extractant. The results of a kinetic study showed that As removal reached equilibrium after incubation for 360 rain, but dissolution of soil components, especially Mg and Ca, was very rapid. Therefore dissolution of soil components would be inevitable if As was further removed. Elovich model best described the kinetic data of As removal among the four models used in the kinetic study.展开更多
The extraction of Nd^3+ and Sm^3+, including the extraction and stripping capability as well as the separation effect of Nd^3+ or Sm^3+, from a sulfuric acid medium, by mixtures of di-(2-ethylhexyl) phosphoric a...The extraction of Nd^3+ and Sm^3+, including the extraction and stripping capability as well as the separation effect of Nd^3+ or Sm^3+, from a sulfuric acid medium, by mixtures of di-(2-ethylhexyl) phosphoric acid (HDEHP, H2A2(0)) and 2-ethylhexyl phosphoric acid mono-2-ethylhexyl ester (HEH/EHP, H2L2(0)) were studied. The distribution ratios and synergistic coefficients of Nd^3+ and Sm^3+ in different acidities were also determined. A synergistic extractive effect was found when HDEHP and HEH/EHP were used as mixed extractants for Sm^3+ or Nd^3+. The chemical compositions of the extracted complex were determined as Nd.(HA2)2-HL2 and Sm.(HA2)2-HL2. The extraction equilibrium constants, enthalpy change, and entropy change of the extraction reaction were also determined.展开更多
Iron element is one of the main impurities in wet-process phosphoric acid and it has a significant impact on the subsequent phosphorus chemical products. This paper studied the feasibility of using Sinco-430 cation ex...Iron element is one of the main impurities in wet-process phosphoric acid and it has a significant impact on the subsequent phosphorus chemical products. This paper studied the feasibility of using Sinco-430 cation exchange resin for iron removal from phosphoric acid. The specific surface area and the total exchange capacity of resin were 8.91 m2·g-1 and 5.18 mmol·g-1, respectively. The sorption mechanism was determined by FTIR and XPS and the results indicated that iron was combined with-SO3 H in resin. The removal process was studied as a function of temperature, H3 PO4 content and mass ratio between resin and solution. The unit mass of resin to remove iron was 0.058 g·g-1 resin when the operating parameters were T = 50 ℃, H3 PO4 content = 27.61 wt%and S/L = 0.1, respectively. Kinetics study demonstrated that pseudo-second-order reaction model fits this study best and the calculated activation energy of overall reaction is 29.10 kJ·mol-1. The overall reaction process was mainly controlled by pore diffusion.展开更多
Phosphorite ore is a potential resource of rare earths (RE) as well as phosphate; therefore, the recovery of RE from wet-process phosphoric acid (WPA) is promising. This study investigated the influence of rotatio...Phosphorite ore is a potential resource of rare earths (RE) as well as phosphate; therefore, the recovery of RE from wet-process phosphoric acid (WPA) is promising. This study investigated the influence of rotational speed, extractant concentration, flow ratio and phase contact time on the centrifugal extraction of RE from WPA and the separation of RE from impurities. The results indicate that higher rotational speed, higher extractant concentration and larger flow ratio are beneficial to the extraction of RE and impurities from phosphoric acid. It is found that the phase contact time for efficiently extracting RE and that for iron are of great difference, which provides an effective method for separating RE from iron using the non-equilibrium extraction process in centrifugal contactors. Compared with equilibrium extraction, the separation factor βRE/Fe is enhanced from 0.07 to 17.6.展开更多
The catalytic fast pyrolysis of cellulose impregnated with phosphoric acid (H3PO4) offers a promising method for the selective production of levoglucosenone (LGO),a valuable anhydrosugar product.However,the fundamenta...The catalytic fast pyrolysis of cellulose impregnated with phosphoric acid (H3PO4) offers a promising method for the selective production of levoglucosenone (LGO),a valuable anhydrosugar product.However,the fundamental mechanism for selective LGO formation is unclear.Herein,quantum chemistry calculations and catalytic fast pyrolysis experiments were performed to reveal the formation mechanism of LGO in H3PO4-catalyzed cellulose pyrolysis.H3PO4 significantly decreased the energy barriers of the pyrolytic reactions and altered the competitiveness of the LGO formation pathways,promoting LGO formation.Through different pathways in the non-catalytic and H3P04-catalyzed conditions,LGO is mainly produced from the primary decomposition of glucose units of cellulose and secondary conversion of levoglucosan.The major catalytic formation pathways of LGO comprise similar reactions,with dehydration at the 3-OH+2-H site as the rate-determining step.Importantly,secondary conversion of 1,4;3,6-dianhydro-α-D-glucopyranose is not feasible for LGO formation,in contrast to previous reports.In addition,a high degree of polymerization is beneficial for the selectivity of LGO formation in the catalytic process,because the glycosidic bond is important for the formation of the bicyclic structure (1,5-and1,6-acetal rings).展开更多
Calcium molybdate(CaMoO4)is the main component of powellite and is a predominant intermediate in the pyrometallurgical and hydrometallurgical process of molybdenum.The extraction of Mo from CaMoO4 by a combination of ...Calcium molybdate(CaMoO4)is the main component of powellite and is a predominant intermediate in the pyrometallurgical and hydrometallurgical process of molybdenum.The extraction of Mo from CaMoO4 by a combination of phosphoric acid and hydrochloric acid was investigated.For further understanding of the leaching mechanism,the effects of five key factors were studied to describe the leaching kinetics.The results indicated that the dissolution rate of CaMoO4 was independent of the stirring speed.Mo extraction significantly increased with increasing HCl concentration and temperature,but decreased with increasing particle size.A shrinking core model with surface chemical reaction was found to withstand the dissolution of CaMoO4.The apparent activation energy was calculated to be 70.879 kJ/mol,and a semi-empirical equation was derived for the rate of reaction.展开更多
There are numerous impurities in wet-process phosphoric acid,among which manganese is one of detrimental metallic impurities,and it causes striking negative effects on the industrial phosphoric acid production and dow...There are numerous impurities in wet-process phosphoric acid,among which manganese is one of detrimental metallic impurities,and it causes striking negative effects on the industrial phosphoric acid production and downstream commodity.This article investigated the adsorption behavior of manganese from phosphoric acid employing Sinco-430 cationic ion-exchange resin.Resorting FT-IR and XPS characterizations,the adsorption mechanism was proved to be that manganese was combined with sulfonic acid group.Several crucial parameters such as temperature,phosphoric acid content and resin dose were studied to optimize adsorption efficiency.Through optimization,removal percentage and sorption capacity of manganese reached 53.12 wt%,28.34 mg·g^-1,respectively.Pseudo-2nd-order kinetic model simulated kinetics data best and the activation energy was evaluated as 6.34 kJ·mol^-1 for the sorption reaction of manganese.In addition,the global adsorption rate was first controlled by film diffusion process and second determined by pore diffusion process.It was found that the resin could adsorb up to 50.24 mg·g^-1 for manganese.Equilibrium studies showed that Toth adsorption isotherm model fitted best,followed by Temkin and Langmuir adsorption isotherm models.Thermodynamic analysis showed that manganese adsorption was an endothermic process with enhanced randomness and spontaneity.展开更多
The dry modification of aluminum hydroxide powders with phosphoric acid and the effects of modification of technological conditions on thermal stability, morphology and oil absorption of aluminum hydroxide powders wer...The dry modification of aluminum hydroxide powders with phosphoric acid and the effects of modification of technological conditions on thermal stability, morphology and oil absorption of aluminum hydroxide powders were investigated. The results show that the increase of mass ratio of phosphoric acid to aluminum hydroxide, the decrease of mass concentration of phosphoric acid and prolongation of mixing time are favorable to the improvement of thermal stability of aluminum hydroxide; when the mass ratio of phosphoric acid to aluminum hydroxide is 5:100, the mass concentration of phosphoric acid is 200 g/L and the mixing time is 10 min, the initial temperature of loss of crystal water in aluminum hydroxide rises from about 192.10 to 208.66 ℃, but the dry modification results in the appearance of agglomeration and macro-aggregate in the modified powders, and the oil absorption of modified powders becomes higher than that of original aluminum hydroxide.展开更多
Desupersaturation is a complex cooling operation that involves hydrodynamic,thermal and mechanical phenomena.This process requires continuous agitation to avoid fouling problems and sludge deposition.The current work ...Desupersaturation is a complex cooling operation that involves hydrodynamic,thermal and mechanical phenomena.This process requires continuous agitation to avoid fouling problems and sludge deposition.The current work aims to investigate the well mixedness in the desupersaturation tank for optimal performance.For this purpose,a multi-fluid CFD study was conducted based on the Euler–Euler modeling approach,considering a multiphase flow involving a liquid phase(phosphoric acid)and a poly-dispersed solid phase,i.e.a sludge with three different sizes where each size is considered as a separate phase.First,the hydrodynamic behavior of the flow within the agitated desupersaturator is analyzed through the investigation of the velocity fields as well as the power and pumping numbers,to determine both the agitator capacity to pump the flow and its power consumption during the operation.Then,in order to assess the mixture homogeneity,we evaluated the solid suspension in the desupersaturation reactor following conventional methods and two new proposed methodologies:the first approach is to evaluate the suspension quality in the mixing system by compartment and the second consists on the assessment of the uniform convergence of the solid concentration.Furthermore,we calculated the time required to achieve a full suspension at different solid concentrations.On other hand,we conducted a detailed analysis of the solid distribution dependency on the impeller rotational speed at different solid volume fraction,which allows a good understanding of the parameters controlling the homogenization in the desupersaturator.展开更多
In order to provide practical fundamental data for rare-earth elements (REEs) recovery from phosphoric acid and to betterunderstand REEs behavior during the phosphoric acid evaporation process, the solubilities of R...In order to provide practical fundamental data for rare-earth elements (REEs) recovery from phosphoric acid and to betterunderstand REEs behavior during the phosphoric acid evaporation process, the solubilities of REEs in phosphoric acid with variousconcentrations of phosphorus at different temperatures were measured. A simple linear model between REEs solubility andphosphoric acid concentration is built and the experimental data are found to fit it very well (R2〉0.94). Hydrogen-ion concentration isfound to be the predominant factor controlling the solubility of REEs in phosphoric acid. In addition, the solubility of REEs inphosphoric acid is found to sharply decrease with increasing temperature, which can be attributed to the increase of the Gibbs energyof the REEPO4 dissolution reaction or the restraint of the disassociation of phosphoric acid molecules owing to the elevatedtemperature.展开更多
Kiln phosphoric acid(KPA)technology could produce P2O5 with high purity and has been applied in thermal phosphoric acid industry;however the formation of fouling in the high-temperature rotary kiln restricts the stabl...Kiln phosphoric acid(KPA)technology could produce P2O5 with high purity and has been applied in thermal phosphoric acid industry;however the formation of fouling in the high-temperature rotary kiln restricts the stable and long-term operation.In this paper,the reaction of phosphate ores with gaseous P2O5 was investigated in a high-temperature reactor,and the Ca O-SiO2-P2O5 ternary phase diagram was analyzed to understand the fouling formation mechanism.The results showed that the low-melting-point products,such as Ca(PO3)2and Ca2P2O7,are responsible for the fouling in the KPA process.In addition,a small amount of impurities,e.g.,aluminum and iron,could facilitate the generation of the low-melting-point products and cause serious fouling.Based on the high-temperature SiO2-P2O5 and CaO-SiO2-P2O5 phase diagram analysis,the control of Si/Ca molar ratio(e.g.,Si/Ca=2.0)was found to avoid fouling formation in the kiln.These results could provide the operation parameters of reaction temperature and feeds composition to suppress the fouling in the kiln reactor for the phosphoric acid production in industry.展开更多
Background The placenta plays a crucial role in supporting and influencing fetal development.We compared the effects of prepartum supplementation with omega-3(n-3)fatty acid(FA)sources,flaxseed oil(FLX)and fish oil(FO...Background The placenta plays a crucial role in supporting and influencing fetal development.We compared the effects of prepartum supplementation with omega-3(n-3)fatty acid(FA)sources,flaxseed oil(FLX)and fish oil(FO),on the expression of genes and proteins related to lipid metabolism,inflammation,oxidative stress,and the endocannabinoid system(ECS)in the expelled placenta,as well as on FA profile and inflammatory response of neonates.Late-pregnant Holstein dairy cows were supplemented with saturated fat(CTL),FLX,or FO.Placental cotyledons(n=5)were collected immediately after expulsion,and extracted RNA and proteins were analyzed by RTPCR and proteomic analysis.Neonatal blood was assessed for FA composition and concentrations of inflammatory markers.Results FO increased the gene expression of fatty acid binding protein 4(FABP4),interleukin 10(IL-10),catalase(CAT),cannabinoid receptor 1(CNR1),and cannabinoid receptor 2(CNR2)compared with CTL placenta.Gene expression of ECS-enzyme FA-amide hydrolase(FAAH)was lower in FLX and FO than in CTL.Proteomic analysis identified 3,974 proteins;of these,51–59 were differentially abundant between treatments(P≤0.05,|fold change|≥1.5).Top canonical pathways enriched in FLX vs.CTL and in FO vs.CTL were triglyceride metabolism and inflammatory processes.Both n-3 FA increased the placental abundance of FA binding proteins(FABPs)3 and 7.The abundance of CNR1 cannabinoid-receptor-interacting-protein-1(CNRIP1)was reduced in FO vs.FLX.In silico modeling affirmed that bovine FABPs bind to endocannabinoids.The FLX increased the abundance of inflammatory CD44-antigen and secreted-phosphoprotein-1,whereas prostaglandin-endoperoxide synthase 2 was decreased in FO vs.CTL placenta.Maternal FO enriched neonatal plasma with n-3 FAs,and both FLX and FO reduced interleukin-6 concentrations compared with CTL.Conclusion Maternal n-3 FA from FLX and FO differentially affected the bovine placenta;both enhanced lipid metabolism and modulated oxidative stress,however,FO increased some transcriptional ECS components,possibly related to the increased FABPs.Maternal FO induced a unique balance of pro-and anti-inflammatory components in the placenta.Taken together,different sources of n-3 FA during late pregnancy enhanced placental immune and metabolic processes,which may affect the neonatal immune system.展开更多
Pien Tze Huang(PZH),a class-1 nationally protected traditional Chinese medicine(TCM),has been used to treat liver diseases such as hepatitis;however,the effect of PZH on the progression of sepsis is unknown.Here,we re...Pien Tze Huang(PZH),a class-1 nationally protected traditional Chinese medicine(TCM),has been used to treat liver diseases such as hepatitis;however,the effect of PZH on the progression of sepsis is unknown.Here,we reported that PZH attenuated lipopolysaccharide(LPS)-induced sepsis in mice and reduced LPS-induced production of proinflammatory cytokines in macrophages by inhibiting the activation of mitogen-activated protein kinase(MAPK)and nuclear factor-kappa B(NF-κB)signalling.Mechanistically,PZH stimulated signal transducer and activator of transcription 3(STAT3)phosphorylation to induce the expression of A20,which could inhibit the activation of NF-κB and MAPK signalling.Knockdown of the bile acid(BA)receptor G protein-coupled bile acid receptor 1(TGR5)in macrophages abolished the effects of PZH on STAT3 phosphorylation and A20 induction,as well as the LPS-induced inflammatory response,suggesting that BAs in PZH may mediate its anti-inflammatory effects by activating TGR5.Consistently,deprivation of BAs in PZH by cholestyramine resin reduced the effects of PZH on the expression of phosphorylated-STAT3 and A20,the activation of NF-κB and MAPK signalling,and the production of proinflammatory cytokines,whereas the addition of BAs to cholestyramine resin-treated PZH partially restored the inhibitory effects on the production of proinflammatory cytokines.Overall,our study identifies BAs as the effective components in PZH that activate TGR5-STAT3-A20 signalling to ameliorate LPS-induced sepsis.展开更多
Eu^(2+) and Mn^(2+) co-activated CaAlSiN_(3) red phosphors were produced using the solid-state reaction tech⁃nique in a N2 environment.Excitation spectra,emission spectra,and diffuse reflection spectra were used to st...Eu^(2+) and Mn^(2+) co-activated CaAlSiN_(3) red phosphors were produced using the solid-state reaction tech⁃nique in a N2 environment.Excitation spectra,emission spectra,and diffuse reflection spectra were used to study the luminescence characteristics,energy gap,and thermal stability in detail.CaAlSiN_(3)∶Eu^(2+) exhibits an extended emission band when stimulated with 450 nm blue light,which is caused by the 4f65d to 4f7 transition of Eu^(2+).Similar⁃ly,CaAlSiN_(3)∶Mn^(2+) displays a wide emission band centered at 628 nm,which results from Mn^(2+)’s transition from 4T1(4G) to 6A1(6S).When the ions of Mn^(2+)were combined into CaAlSiN_(3)∶Eu^(2+),the photoluminescence intensity of Eu^(2+ )was greatly boosted because there was energy transfer and co-emission between Mn^(2+) and Eu^(2+).Beyond that,CaAlSiN_(3)∶Eu^(2+),Mn^(2+) emerges with splendid thermostability and high quantum efficiency,the quenching temperature surpasses 300℃,and the internal quantum efficiency is determined to be around 84.9%.The white LED was pack⁃aged with a combination of CaAlSiN_(3)∶Eu^(2+),Mn^(2+),LuAG∶Ce3+ and a blue chip.At a warm white-light corresponding color temperature(3009 K) with CIE coordinates(0.4223,0.3748),the color rendering index Ra has reached 93.2.CaAlSiN_(3)∶Eu^(2+),Mn^(2+) would have great application potential as a red-emitting phosphor for white LEDs.展开更多
Genetic manipulation(either restraint or enhancement)of the biosynthesis pathway ofα-linolenic acid(ALA)in seed oil is an important goal in Brassica napus breeding.B.napus is a tetraploid plant whose genome often har...Genetic manipulation(either restraint or enhancement)of the biosynthesis pathway ofα-linolenic acid(ALA)in seed oil is an important goal in Brassica napus breeding.B.napus is a tetraploid plant whose genome often har-bors four and six homologous copies,respectively,of the two fatty acid desaturases FAD2 and FAD3,which con-trol the last two steps of ALA biosynthesis during seed oil accumulation.In this study,we compared their promoters,coding sequences,and expression levels in three high-ALA inbred lines 2006L,R8Q10,and YH25005,a low-ALA line A28,a low-ALA/high-oleic-acid accession SW,and the wildtype ZS11.The expression levels of most FAD2 and FAD3 homologs in the three high-ALA accessions were higher than those in ZS11 and much higher than those in A28 and SW.The three high-ALA accessions shared similar sequences with the pro-moters and CDSs of BnFAD3.C4 and BnFAD3.A3.In A28 and SW,substitution of three amino acid residues in BnFAD2.A5 and BnFAD2.C5,an absence of BnFAD2.C1 locus,and a 549 bp long deletion on the BnFAD3.A3 promoter were detected.The profile of BnFAD2 mutation in the two low-ALA accessions A28 and SW is different from that reported in previous studies.The mutations in BnFAD3 in the high-ALA accessions are reported for thefirst time.In identifying the sites of these mutations,we provide detailed information to aid the design of mole-cular markers for accelerated breeding schemes.展开更多
Objective:A model of inflammatory damage was induced by radiation to investigate whether ferulic acid(FA)can reduce the inflammatory response through the Sirt1-NLRP3 inflammatory pathway.This will help discover radiat...Objective:A model of inflammatory damage was induced by radiation to investigate whether ferulic acid(FA)can reduce the inflammatory response through the Sirt1-NLRP3 inflammatory pathway.This will help discover radiation-protective drugs and elucidate the molecular mechanisms related to radiation-induced inflammatory damage.Methods:A mouse model of radiation-induced immunoinflammatory injury was established to verify the anti-inflammatory effects of FA in vivo.C57BL/6J mice were randomly divided into six groups,and 5 Gy whole-body irradiation was used for modeling.Mice were administered a gastric solvent,amifostine,or 25,50,or 100 mg/kg FA daily for 12 days,consecutively,before irradiation.The serum of mice was collected 24 hour after irradiation to observe the content of inflammatory factors interleukin(IL)-1β,IL-18,IL-6,and tumor necrosis factor(TNF)-α.The spleen and thymus tissues of mice were weighed and the organ index was calculated for pathological testing and immunofluorescence detection.Results:FA reduced the radiation-induced decrease in the spleen and thymus indices.FA significantly reduced the secretion of inflammatory factors in the serum and reversed the radiation-induced reduction in lymphocytes in the spleen and thymus of mice.FA activated Sirt1 and inhibited the expression of the NLRP3 inflammasome to alleviate the inflammatory response.Conclusions:FA reduced radiation-induced inflammation in animals,possibly by activating Sirt1 and reducing nucleotide oligomerization domain(NOD)-like receptor thermal protein domain associated protein 3(NLRP3)inflammasome expression,thereby reducing the secretion of inflammatory factors.展开更多
基金Project supported by the Scientific Research Project of Higher Education in the Inner Mongolia Autonomous Region,China(Grant No.NJZY23100)the Natural Science Foundation of Inner Mongolia Autonomous Region,China(Grant No.2024FX_(3)0)the 14th Five Year Plan Project for Education Science in Inner Mongolia Autonomous Region,China(Grant No.NGJGH2023205).
文摘Sonoluminescence is more distinctly observed in phosphoric and sulfuric acid,which exhibit high viscosity and lower vapor pressures relative to water.Within an 85-wt%phosphoric acid solution saturated with argon(Ar),variations in the light-emitting regimes of bubbles were noted to correspond with increments in the driving acoustic intensity.Specifically,the bubbles were observed to perform a dance-like motion 2 cm below the multi-bubble sonoluminescence(MBSL)cluster,traversing a 25-mm^(2) grid during the camera exposure period.Spectral analysis conducted at the beginning of the experiment showed a gradual attenuation of CN(B^(2)S–X^(2)S)emission concurrent with a strengthening of Ar(4p–4s)atom emission lines.The application of a theoretical temperature model to the spectral data revealed that the internal temperature of the bubbles escalates swiftly upon their implosion.This study is instrumental in advancing the comprehension of the underlying mechanisms of sonoluminescence and in the formulation of a dynamic model for the behavior of the bubbles.
基金Suported by the breeding programs of Sichuan University(SCU2015C002)
文摘In a rotary kiln process for phosphoric acid production,the reaction between gaseous phosphorus pentoxide(P2O5)and phosphate ore and silica contained in feed balls(the so-called P2O5"absorption")not only reduces phosphorous recovery but also generates a large amount of low melting-point side products.The products may give rise to formation of kiln ring,which interferes with kiln operation performance.In this study,the reactions of gaseous P2O5with solid calcium phosphate(Ca3(PO4)2),silica(SiO2)and their mixture,respectively,were investigated via combined chemical analysis and various characterizations comprised of X-ray diffraction(XRD),Fourier-transform infrared(FT-IR)spectroscopy,thermogravimetric analysis and differential scanning calorimeter(TG&DSC),and scanning electron microscopy and energy dispersive spectrometer(SEM&EDS).Attentions were focused on apparent morphology,phase transformation and thermal stability of the products of the P2O5"absorption"at different temperatures.The results show that the temperature significantly affected the"absorption".The reaction between pure Ca3(PO4)2 and P2O5 occurred at 500℃.Calcium metaphosphate(Ca(PO3)2)was the primary product at the temperatures≤900℃ with its melting point≤900℃ while calcium pyrophosphate(Ca2P2O7)was obtained over 1000℃,which has a melting point≤1200℃.The"absorption"by pure SiO2 started at 800℃ and the most significant reaction occurred at 1000℃ with formation of silicon pyrophosphate(SiP2O7)product of melting point≤1000℃.Using mixed Ca3(PO4)2and SiO2as raw material,the"absorption"by Ca3(PO4)2 was enhanced due to existence of silica.At 600–700℃,silica was inert to P2O5and thus formed a porous structure in the raw material,which accelerated diffusion of gaseous P2O5inside the mixture.At higher temperatures,the combined"absorption"by calcium phosphate and reaction between silicon dioxide and the"absorption"product calcium pyrophosphate,reinforced the"absorption"by the mixture.Besides,it was found that both Ca(PO3)2and SiP2O7were unstable at high temperatures and would decompose to Ca2P2O7and SiO2,respectively,at over 1000℃ and 1100℃ with the release of gaseous P2O5at the same time.
文摘Heteropoly acid H3PW12040 (PW) has been used as an effective catalyst for the synthesis of thieno[2,3-d]pyrimidin-4(3H)-one derivatives. The present methodology offers several advantages, such as high yields, short reaction times, mild reaction condition and a recyclable catalyst with a very easy work up.
基金Supported by National Natural Science Foundation of China(51168013)National Key Technology Support Program(2014BAC04B03)~~
文摘A comparison between the effects of ordinary walnut shell and phosphoric acid modified walnut shell on adsorption of Cr(Ⅵ) was carried out. The experimental results showed that owing to larger surface void of modified walnut shell its adsorption of Cr(Ⅵ) was better. When the temperature was 35 ℃, adsorbent particle size was 1.0-1.6 mm, shaker shock rate was 200 r/min, and dosage of walnut shell was 0.80 g, the Cr(Ⅵ) removal rate reached 99.4%. The fitting of adsorption isotherm and kinetics model showed that, Langmuir isotherm model could reflect the adsorption process of modified walnut shell; and both the adsorption processes of ordinary and modified walnut shells accorded with the pseudo-second-order kinetic equations.
基金This work was supported by the National Natural Science Foundation of China(No.20677080,20477055).
文摘Laboratory batch experiments were conducted to study arsenic (As) removal from a naturally contaminated soil using phosphoric acid (H3PO4) and potassium dihydrogen phosphate (KHEPO4). Both H3PO4 and KHEPO4 proved to reduce toxicity of the soil in terms of soil As content, attaining more than 20% As removal at a concentration of 200 mmol/L. At the same time, acidification of soil and dissolution of soil components (Ca, Mg, and Si) resulted from using these two extractants, especially H3PO4. The effectiveness of these two extractants could be attributed to the replacement of As by phosphate ions (PO4^3-). The function of H3PO4 as an acid to dissolve soil components had little effects on As removal. KH2PO4 almost removed as much As as H3PO4, but it did not result in serious damage to soils, indicating that it was a more promising extractant. The results of a kinetic study showed that As removal reached equilibrium after incubation for 360 rain, but dissolution of soil components, especially Mg and Ca, was very rapid. Therefore dissolution of soil components would be inevitable if As was further removed. Elovich model best described the kinetic data of As removal among the four models used in the kinetic study.
基金the National Natural Science Foundation of China (50674016)the National High Technology Research and Develop-ment Program of China (863 Program) ( 2006AA06Z123)
文摘The extraction of Nd^3+ and Sm^3+, including the extraction and stripping capability as well as the separation effect of Nd^3+ or Sm^3+, from a sulfuric acid medium, by mixtures of di-(2-ethylhexyl) phosphoric acid (HDEHP, H2A2(0)) and 2-ethylhexyl phosphoric acid mono-2-ethylhexyl ester (HEH/EHP, H2L2(0)) were studied. The distribution ratios and synergistic coefficients of Nd^3+ and Sm^3+ in different acidities were also determined. A synergistic extractive effect was found when HDEHP and HEH/EHP were used as mixed extractants for Sm^3+ or Nd^3+. The chemical compositions of the extracted complex were determined as Nd.(HA2)2-HL2 and Sm.(HA2)2-HL2. The extraction equilibrium constants, enthalpy change, and entropy change of the extraction reaction were also determined.
基金Supported by the National Basic Research Program of China(2016YFD0200404)
文摘Iron element is one of the main impurities in wet-process phosphoric acid and it has a significant impact on the subsequent phosphorus chemical products. This paper studied the feasibility of using Sinco-430 cation exchange resin for iron removal from phosphoric acid. The specific surface area and the total exchange capacity of resin were 8.91 m2·g-1 and 5.18 mmol·g-1, respectively. The sorption mechanism was determined by FTIR and XPS and the results indicated that iron was combined with-SO3 H in resin. The removal process was studied as a function of temperature, H3 PO4 content and mass ratio between resin and solution. The unit mass of resin to remove iron was 0.058 g·g-1 resin when the operating parameters were T = 50 ℃, H3 PO4 content = 27.61 wt%and S/L = 0.1, respectively. Kinetics study demonstrated that pseudo-second-order reaction model fits this study best and the calculated activation energy of overall reaction is 29.10 kJ·mol-1. The overall reaction process was mainly controlled by pore diffusion.
基金the National High Technology Research and Development Program of China (No.2006AA06Z126) for the financial aid
文摘Phosphorite ore is a potential resource of rare earths (RE) as well as phosphate; therefore, the recovery of RE from wet-process phosphoric acid (WPA) is promising. This study investigated the influence of rotational speed, extractant concentration, flow ratio and phase contact time on the centrifugal extraction of RE from WPA and the separation of RE from impurities. The results indicate that higher rotational speed, higher extractant concentration and larger flow ratio are beneficial to the extraction of RE and impurities from phosphoric acid. It is found that the phase contact time for efficiently extracting RE and that for iron are of great difference, which provides an effective method for separating RE from iron using the non-equilibrium extraction process in centrifugal contactors. Compared with equilibrium extraction, the separation factor βRE/Fe is enhanced from 0.07 to 17.6.
基金the National Natural Science Foundation of China(51576064,51776070)Beijing Nova Program(Z171100001117064)+2 种基金Beijing Natural Science Foundation(3172030)grants from the Fok Ying Tung Education Foundation(161051)Fundamental Research Funds for the Central Universities(2018QN057,2018ZD08)for financial support。
文摘The catalytic fast pyrolysis of cellulose impregnated with phosphoric acid (H3PO4) offers a promising method for the selective production of levoglucosenone (LGO),a valuable anhydrosugar product.However,the fundamental mechanism for selective LGO formation is unclear.Herein,quantum chemistry calculations and catalytic fast pyrolysis experiments were performed to reveal the formation mechanism of LGO in H3PO4-catalyzed cellulose pyrolysis.H3PO4 significantly decreased the energy barriers of the pyrolytic reactions and altered the competitiveness of the LGO formation pathways,promoting LGO formation.Through different pathways in the non-catalytic and H3P04-catalyzed conditions,LGO is mainly produced from the primary decomposition of glucose units of cellulose and secondary conversion of levoglucosan.The major catalytic formation pathways of LGO comprise similar reactions,with dehydration at the 3-OH+2-H site as the rate-determining step.Importantly,secondary conversion of 1,4;3,6-dianhydro-α-D-glucopyranose is not feasible for LGO formation,in contrast to previous reports.In addition,a high degree of polymerization is beneficial for the selectivity of LGO formation in the catalytic process,because the glycosidic bond is important for the formation of the bicyclic structure (1,5-and1,6-acetal rings).
基金Project(2017M610766)supported by China Postdoctoral Science FoundationProject(FRF-BD-17-010A)supported by the Fundamental Research Funds for the Central Universities,China
文摘Calcium molybdate(CaMoO4)is the main component of powellite and is a predominant intermediate in the pyrometallurgical and hydrometallurgical process of molybdenum.The extraction of Mo from CaMoO4 by a combination of phosphoric acid and hydrochloric acid was investigated.For further understanding of the leaching mechanism,the effects of five key factors were studied to describe the leaching kinetics.The results indicated that the dissolution rate of CaMoO4 was independent of the stirring speed.Mo extraction significantly increased with increasing HCl concentration and temperature,but decreased with increasing particle size.A shrinking core model with surface chemical reaction was found to withstand the dissolution of CaMoO4.The apparent activation energy was calculated to be 70.879 kJ/mol,and a semi-empirical equation was derived for the rate of reaction.
文摘There are numerous impurities in wet-process phosphoric acid,among which manganese is one of detrimental metallic impurities,and it causes striking negative effects on the industrial phosphoric acid production and downstream commodity.This article investigated the adsorption behavior of manganese from phosphoric acid employing Sinco-430 cationic ion-exchange resin.Resorting FT-IR and XPS characterizations,the adsorption mechanism was proved to be that manganese was combined with sulfonic acid group.Several crucial parameters such as temperature,phosphoric acid content and resin dose were studied to optimize adsorption efficiency.Through optimization,removal percentage and sorption capacity of manganese reached 53.12 wt%,28.34 mg·g^-1,respectively.Pseudo-2nd-order kinetic model simulated kinetics data best and the activation energy was evaluated as 6.34 kJ·mol^-1 for the sorption reaction of manganese.In addition,the global adsorption rate was first controlled by film diffusion process and second determined by pore diffusion process.It was found that the resin could adsorb up to 50.24 mg·g^-1 for manganese.Equilibrium studies showed that Toth adsorption isotherm model fitted best,followed by Temkin and Langmuir adsorption isotherm models.Thermodynamic analysis showed that manganese adsorption was an endothermic process with enhanced randomness and spontaneity.
基金Project(06SK2011) supported by the Science and Technology Program of Hunan Province, China
文摘The dry modification of aluminum hydroxide powders with phosphoric acid and the effects of modification of technological conditions on thermal stability, morphology and oil absorption of aluminum hydroxide powders were investigated. The results show that the increase of mass ratio of phosphoric acid to aluminum hydroxide, the decrease of mass concentration of phosphoric acid and prolongation of mixing time are favorable to the improvement of thermal stability of aluminum hydroxide; when the mass ratio of phosphoric acid to aluminum hydroxide is 5:100, the mass concentration of phosphoric acid is 200 g/L and the mixing time is 10 min, the initial temperature of loss of crystal water in aluminum hydroxide rises from about 192.10 to 208.66 ℃, but the dry modification results in the appearance of agglomeration and macro-aggregate in the modified powders, and the oil absorption of modified powders becomes higher than that of original aluminum hydroxide.
文摘Desupersaturation is a complex cooling operation that involves hydrodynamic,thermal and mechanical phenomena.This process requires continuous agitation to avoid fouling problems and sludge deposition.The current work aims to investigate the well mixedness in the desupersaturation tank for optimal performance.For this purpose,a multi-fluid CFD study was conducted based on the Euler–Euler modeling approach,considering a multiphase flow involving a liquid phase(phosphoric acid)and a poly-dispersed solid phase,i.e.a sludge with three different sizes where each size is considered as a separate phase.First,the hydrodynamic behavior of the flow within the agitated desupersaturator is analyzed through the investigation of the velocity fields as well as the power and pumping numbers,to determine both the agitator capacity to pump the flow and its power consumption during the operation.Then,in order to assess the mixture homogeneity,we evaluated the solid suspension in the desupersaturation reactor following conventional methods and two new proposed methodologies:the first approach is to evaluate the suspension quality in the mixing system by compartment and the second consists on the assessment of the uniform convergence of the solid concentration.Furthermore,we calculated the time required to achieve a full suspension at different solid concentrations.On other hand,we conducted a detailed analysis of the solid distribution dependency on the impeller rotational speed at different solid volume fraction,which allows a good understanding of the parameters controlling the homogenization in the desupersaturator.
基金Project(51674036)supported by the National Natural Science Foundation of ChinaProject(Z161100004916108)supported by the Beijing Nova Program,China
文摘In order to provide practical fundamental data for rare-earth elements (REEs) recovery from phosphoric acid and to betterunderstand REEs behavior during the phosphoric acid evaporation process, the solubilities of REEs in phosphoric acid with variousconcentrations of phosphorus at different temperatures were measured. A simple linear model between REEs solubility andphosphoric acid concentration is built and the experimental data are found to fit it very well (R2〉0.94). Hydrogen-ion concentration isfound to be the predominant factor controlling the solubility of REEs in phosphoric acid. In addition, the solubility of REEs inphosphoric acid is found to sharply decrease with increasing temperature, which can be attributed to the increase of the Gibbs energyof the REEPO4 dissolution reaction or the restraint of the disassociation of phosphoric acid molecules owing to the elevatedtemperature.
基金support from the National Key R&D Program of China(2018YFC1900201)the Provincial Key R&D Program of Shanxi(201603D31212003)。
文摘Kiln phosphoric acid(KPA)technology could produce P2O5 with high purity and has been applied in thermal phosphoric acid industry;however the formation of fouling in the high-temperature rotary kiln restricts the stable and long-term operation.In this paper,the reaction of phosphate ores with gaseous P2O5 was investigated in a high-temperature reactor,and the Ca O-SiO2-P2O5 ternary phase diagram was analyzed to understand the fouling formation mechanism.The results showed that the low-melting-point products,such as Ca(PO3)2and Ca2P2O7,are responsible for the fouling in the KPA process.In addition,a small amount of impurities,e.g.,aluminum and iron,could facilitate the generation of the low-melting-point products and cause serious fouling.Based on the high-temperature SiO2-P2O5 and CaO-SiO2-P2O5 phase diagram analysis,the control of Si/Ca molar ratio(e.g.,Si/Ca=2.0)was found to avoid fouling formation in the kiln.These results could provide the operation parameters of reaction temperature and feeds composition to suppress the fouling in the kiln reactor for the phosphoric acid production in industry.
基金financially supported by the Chief Scientist of the Ministry of Agriculture,grant number 20-04-0015,Rishon Lezion,Israel。
文摘Background The placenta plays a crucial role in supporting and influencing fetal development.We compared the effects of prepartum supplementation with omega-3(n-3)fatty acid(FA)sources,flaxseed oil(FLX)and fish oil(FO),on the expression of genes and proteins related to lipid metabolism,inflammation,oxidative stress,and the endocannabinoid system(ECS)in the expelled placenta,as well as on FA profile and inflammatory response of neonates.Late-pregnant Holstein dairy cows were supplemented with saturated fat(CTL),FLX,or FO.Placental cotyledons(n=5)were collected immediately after expulsion,and extracted RNA and proteins were analyzed by RTPCR and proteomic analysis.Neonatal blood was assessed for FA composition and concentrations of inflammatory markers.Results FO increased the gene expression of fatty acid binding protein 4(FABP4),interleukin 10(IL-10),catalase(CAT),cannabinoid receptor 1(CNR1),and cannabinoid receptor 2(CNR2)compared with CTL placenta.Gene expression of ECS-enzyme FA-amide hydrolase(FAAH)was lower in FLX and FO than in CTL.Proteomic analysis identified 3,974 proteins;of these,51–59 were differentially abundant between treatments(P≤0.05,|fold change|≥1.5).Top canonical pathways enriched in FLX vs.CTL and in FO vs.CTL were triglyceride metabolism and inflammatory processes.Both n-3 FA increased the placental abundance of FA binding proteins(FABPs)3 and 7.The abundance of CNR1 cannabinoid-receptor-interacting-protein-1(CNRIP1)was reduced in FO vs.FLX.In silico modeling affirmed that bovine FABPs bind to endocannabinoids.The FLX increased the abundance of inflammatory CD44-antigen and secreted-phosphoprotein-1,whereas prostaglandin-endoperoxide synthase 2 was decreased in FO vs.CTL placenta.Maternal FO enriched neonatal plasma with n-3 FAs,and both FLX and FO reduced interleukin-6 concentrations compared with CTL.Conclusion Maternal n-3 FA from FLX and FO differentially affected the bovine placenta;both enhanced lipid metabolism and modulated oxidative stress,however,FO increased some transcriptional ECS components,possibly related to the increased FABPs.Maternal FO induced a unique balance of pro-and anti-inflammatory components in the placenta.Taken together,different sources of n-3 FA during late pregnancy enhanced placental immune and metabolic processes,which may affect the neonatal immune system.
基金supported by research funds from Zhangzhou Pien Tze Huang Pharmaceutical Co.Ltd(Grant Nos.:437b8f31,d6092dae,YHT-19064 to Chundong Yu)the National Natural Science Foundation of China(Grant Nos.:81970485,82173086 to Chundong Yu)the Natural Science Foundation of Fujian Province(Grant No.:2023J01249 to Shicong Wang).
文摘Pien Tze Huang(PZH),a class-1 nationally protected traditional Chinese medicine(TCM),has been used to treat liver diseases such as hepatitis;however,the effect of PZH on the progression of sepsis is unknown.Here,we reported that PZH attenuated lipopolysaccharide(LPS)-induced sepsis in mice and reduced LPS-induced production of proinflammatory cytokines in macrophages by inhibiting the activation of mitogen-activated protein kinase(MAPK)and nuclear factor-kappa B(NF-κB)signalling.Mechanistically,PZH stimulated signal transducer and activator of transcription 3(STAT3)phosphorylation to induce the expression of A20,which could inhibit the activation of NF-κB and MAPK signalling.Knockdown of the bile acid(BA)receptor G protein-coupled bile acid receptor 1(TGR5)in macrophages abolished the effects of PZH on STAT3 phosphorylation and A20 induction,as well as the LPS-induced inflammatory response,suggesting that BAs in PZH may mediate its anti-inflammatory effects by activating TGR5.Consistently,deprivation of BAs in PZH by cholestyramine resin reduced the effects of PZH on the expression of phosphorylated-STAT3 and A20,the activation of NF-κB and MAPK signalling,and the production of proinflammatory cytokines,whereas the addition of BAs to cholestyramine resin-treated PZH partially restored the inhibitory effects on the production of proinflammatory cytokines.Overall,our study identifies BAs as the effective components in PZH that activate TGR5-STAT3-A20 signalling to ameliorate LPS-induced sepsis.
文摘Eu^(2+) and Mn^(2+) co-activated CaAlSiN_(3) red phosphors were produced using the solid-state reaction tech⁃nique in a N2 environment.Excitation spectra,emission spectra,and diffuse reflection spectra were used to study the luminescence characteristics,energy gap,and thermal stability in detail.CaAlSiN_(3)∶Eu^(2+) exhibits an extended emission band when stimulated with 450 nm blue light,which is caused by the 4f65d to 4f7 transition of Eu^(2+).Similar⁃ly,CaAlSiN_(3)∶Mn^(2+) displays a wide emission band centered at 628 nm,which results from Mn^(2+)’s transition from 4T1(4G) to 6A1(6S).When the ions of Mn^(2+)were combined into CaAlSiN_(3)∶Eu^(2+),the photoluminescence intensity of Eu^(2+ )was greatly boosted because there was energy transfer and co-emission between Mn^(2+) and Eu^(2+).Beyond that,CaAlSiN_(3)∶Eu^(2+),Mn^(2+) emerges with splendid thermostability and high quantum efficiency,the quenching temperature surpasses 300℃,and the internal quantum efficiency is determined to be around 84.9%.The white LED was pack⁃aged with a combination of CaAlSiN_(3)∶Eu^(2+),Mn^(2+),LuAG∶Ce3+ and a blue chip.At a warm white-light corresponding color temperature(3009 K) with CIE coordinates(0.4223,0.3748),the color rendering index Ra has reached 93.2.CaAlSiN_(3)∶Eu^(2+),Mn^(2+) would have great application potential as a red-emitting phosphor for white LEDs.
基金The study was financially supported by Projects from Shaanxi Province(2021LLRH-07-03-01 and 2023-ZDLNY-07)Yangling Seed Industry Innovation(YLzy-yc2021-01).The funders had no role in study design,data collection and analysis,decision to publish,or preparation of the manuscript.
文摘Genetic manipulation(either restraint or enhancement)of the biosynthesis pathway ofα-linolenic acid(ALA)in seed oil is an important goal in Brassica napus breeding.B.napus is a tetraploid plant whose genome often har-bors four and six homologous copies,respectively,of the two fatty acid desaturases FAD2 and FAD3,which con-trol the last two steps of ALA biosynthesis during seed oil accumulation.In this study,we compared their promoters,coding sequences,and expression levels in three high-ALA inbred lines 2006L,R8Q10,and YH25005,a low-ALA line A28,a low-ALA/high-oleic-acid accession SW,and the wildtype ZS11.The expression levels of most FAD2 and FAD3 homologs in the three high-ALA accessions were higher than those in ZS11 and much higher than those in A28 and SW.The three high-ALA accessions shared similar sequences with the pro-moters and CDSs of BnFAD3.C4 and BnFAD3.A3.In A28 and SW,substitution of three amino acid residues in BnFAD2.A5 and BnFAD2.C5,an absence of BnFAD2.C1 locus,and a 549 bp long deletion on the BnFAD3.A3 promoter were detected.The profile of BnFAD2 mutation in the two low-ALA accessions A28 and SW is different from that reported in previous studies.The mutations in BnFAD3 in the high-ALA accessions are reported for thefirst time.In identifying the sites of these mutations,we provide detailed information to aid the design of mole-cular markers for accelerated breeding schemes.
基金funded by the National Key Research and Development Program(2022YFC3500303)Innovation Team and Talents Cultivation Program of the National Administration of Traditional Chinese Medicine(ZYYCXTD-C-202009)National Natural Science Foundation of China(81873063).
文摘Objective:A model of inflammatory damage was induced by radiation to investigate whether ferulic acid(FA)can reduce the inflammatory response through the Sirt1-NLRP3 inflammatory pathway.This will help discover radiation-protective drugs and elucidate the molecular mechanisms related to radiation-induced inflammatory damage.Methods:A mouse model of radiation-induced immunoinflammatory injury was established to verify the anti-inflammatory effects of FA in vivo.C57BL/6J mice were randomly divided into six groups,and 5 Gy whole-body irradiation was used for modeling.Mice were administered a gastric solvent,amifostine,or 25,50,or 100 mg/kg FA daily for 12 days,consecutively,before irradiation.The serum of mice was collected 24 hour after irradiation to observe the content of inflammatory factors interleukin(IL)-1β,IL-18,IL-6,and tumor necrosis factor(TNF)-α.The spleen and thymus tissues of mice were weighed and the organ index was calculated for pathological testing and immunofluorescence detection.Results:FA reduced the radiation-induced decrease in the spleen and thymus indices.FA significantly reduced the secretion of inflammatory factors in the serum and reversed the radiation-induced reduction in lymphocytes in the spleen and thymus of mice.FA activated Sirt1 and inhibited the expression of the NLRP3 inflammasome to alleviate the inflammatory response.Conclusions:FA reduced radiation-induced inflammation in animals,possibly by activating Sirt1 and reducing nucleotide oligomerization domain(NOD)-like receptor thermal protein domain associated protein 3(NLRP3)inflammasome expression,thereby reducing the secretion of inflammatory factors.