Photo-induced Alignment Behavior of Azobenzene-containing Polymer Films with Different Cross-linking Degree

Three series of amorphous copolymers containing azobenzene groups with various substituents and certain amounts of crosslinkable acrylic groups were prepared. The cross-linked polymer films were obtained by thermal polymerization of the acrylic groups in the copolymers, during which, by controlling the time of cross-linking reaction, the films can be made with different cross-linking degree （from 0 to 32%, which was monitored by FT-IR spectra measurement）. Photo-induced alignment process of the films was performed under irradiation with linearly polarized light at 442 nm, and the effect of cross-linking degree on the photo-induced alignment rate was investigated. The dynamics of the photo-induced alignment was analyzed with biexponential curve fitting. The photo-induced alignment rate and the maximum transmittance of the films decreased because of the cross-linking. Furthermore, for the cross-linked samples, it was found that their saturated value of transmittances keep constant after repeated ＂writing＂ and ＂erasing＂ cycles. The findings reveal that the cross-linking of the film can effectively restrain the phototactic mass transport of azopolymer during irradiation by polarized light. The relationship between the cross-linking degree and the photo-induced alignment behavior of azopolymer is discussed in detail.

Photo-induced intramolecular electron transfer and intramolecular vibrational relaxation of rhodamine 6G in DMSO revealed by multiplex transient grating spectroscopy

Photo-induced intramolecular electron transfer （PIET） and intramolecular vibrational relaxation （IVR） dynamics of the excited state of rhodamine 6G （Rh6G＋） in DMSO are investigated by multiplex transient grating. Two major compo- nents are resolved in the dynamics of Rh6G＋. The first component, with a lifetime τTPIET = 140 fs-260 fs, is attributed to PIET from the phenyl ring to the xanthene plane. The IVR process occurring in the range ZIVR = 3.3 ps-5.2 ps is much slower than the first component. The PIET and IVR processes occurring in the excited state of Rh6G＋ are quantitatively determined, and a better understanding of the relationship between these processes is obtained.

PHOTO-INDUCED DOPED POLYANILINE BY THE VINYLIDENE CHLORIDE AND METHYL ACRYLATE COPOLYMER AS PHOTO ACID GENERATOR

The emeraldine base form of polyaniline (PANI) can be doped by a photo-induced doping method. In this method a. copolymer of vinylidene chloride and methyl acrylate (VCMAC) was used as photo acid generator which can release proton when it is exposed to ultraviolet light (lambda = 254 nm). The structure of PANI-VCMAC system before and after irradiation was characterized by elemental analysis, IR, XTP, anti SEM images. Results obtained indicate that the photo-induced doping characteristics, such as doping position and type of charge carriers, are similar to that of PANI doped with HCl. The poor room-temperature conductivity (similar to 10-S-5/cm) of PANI-VCMAC system after irradiation may be due to low doping degree (similar to pH=3) and the difference in morphology as compared with PANI-HCl film.

Valence electronic engineering of superhydrophilic Dy-evoked Ni-MOF outperforming RuO_(2) for highly efficient electrocatalytic oxygen evolution

Tackling the problem of poor conductivity and catalytic stability of pristine metal-organic frameworks(MOFs) is crucial to improve their oxygen evolution reaction(OER) performance.Herein,we introduce a novel strategy of dysprosium(Dy) doping,using the unique 4f orbitals of this rare earth element to enhance electrocatalytic activity of MOFs.Our method involves constructing Dy-doped Ni-MOF(Dy@Ni-MOF) nanoneedles on carbon cloth via a Dy-induced valence electronic perturbation approach.Experiments and density functional theory(DFT) calculations reveal that Dy doping can effectively modify the electronic structure of the Ni active centers and foster a strong electronic interaction between Ni and Dy.The resulting benefits include a reduced work function and a closer proximity of the d-band center to the Fermi level,which is conducive to improving electrical conductivity and promoting the adsorption of oxygen-containing intermediates.Furthermore,the Dy@Ni-MOF achieves superhydrophilicity,ensuring effective electrolyte contact and thus accelerating reaction kinetics,Ex-situ and in-situ analysis results manifest Dy_(2)O_(3)/NiOOH as the actual active species.Therefore,Dy@Ni-MOF shows impressive OER performance,significantly surpassing Ni-MOF.Besides,the overall water splitting device with Dy@NiMOF as an anode delivers a low cell voltage of 1.51 V at 10 mA cm^(-2) and demonstrates long-term stability for 100 h,positioning it as a promising substitute for precious metal catalysts.

In situ observation of photo-induced shortening of single Au nanorod for plasmon-enhanced formic acid dehydrogenation

Photo-induced selective shortening strategy was developed to synthesize Au nanorods(NRs)with different aspect ratios,and in situ observation of photo-induced shortening of single Au nanorod was realized,which is helpful for understanding the relationship between SPR decay and geometric nanostructure.The as-synthesized plasmonic Pd–Au NRs exhibit efficient formic acid dehydrogenation.Very impressively,the interfacial interaction between plasmonic bimetallic nanostructures and adsorbed molecules(HCOOH)was explored in situ at the single-particle level.Significant photoluminescence(PL)quenching of Pd–Au NRs was observed when HCOOH contacted the catalyst,confirming the charge transfer between Pd–Au NRs and HCOOH molecules.Finally,we shed light on the catalytic mechanism of plasmon-induced HCOOH dehydrogenation by coupling single-particle PL measurement with finite difference time domain(FDTD)and density functional theory(DFT)calculations.

Photo-induced absorption in the pump probe spectroscopy of single-walled carbon nanotubes

Femtosecond pump probe spectroscopy is employed to study the photo-induced absorption feature in the single-walled carbon nanotube transient spectrum. The two advantages of the experiment, a chirality enriched sample and tuning the pump wavelength to the resonance of a specific nanotube species, greatly facilitate the identification of the photo-induced absorption signal of one tube species. It is found that a photo-induced absorption feature is located at one radial breathing mode to the blue side of the E11 state. This finding prompts a new explanation for the origin of the photo-induced absorption： the transition from the ground state to a phonon coupled state near the E ii state. The explanation suggests a superposition mechanism of the photo-bleach and photo-induced absorption signals, which may serve as a key to the interpretation of the complex pump probe transient spectrum of carbon nanotubes. The finding sheds some light on the understanding of the complex non-radiative relaxation process and the electronic structure of single-walled carbon nanotubes.

Photo-induced Phenomena in GeS_4 Glasses

GeS4 bulk glasses were prepared by the melt-quench technique and the samples were irradiated by 532-nm linearly polarized light. After the laser treatment, the photo-induced changes of the samples were investigated by UV-1601 speetrophotometer and optical second-order nonlinear tester. The results show that the transmittance of the samples around 532 nm obviously decreases and Bragg reflector forms, which is due to the production of photon-generated carriers. With the increase of laser pulse energy or the extension of irradiation duration, the Bragg reflector increases and gradually tends to be stable. These can be ascribed to the excitation- capture process of the carriers. After irradiation, the relaxation phenomenon results from the release of part of the absorbed energy in the glass matrix. And the fitting equation of the relaxation process is consistent with a conventional Kohlrausch stretched exponential function. The origin of the second harmonic generation （SHG） is because of the dipole reorientation caused by the photo-induced anisotropy in the glass.

STUDY ON PHOTO-INDUCED ORIENTATION OF A NOVEL PHOTO-ALIGNMENT FILM WITH SURFACE ENHANCED RAMAN SCATTERING (SERS) SPECTROSCOPY

Surface enhanced Raman scattering (SERS) spectroscopy was first utilized to study the photo-orientation behaviour of the photoreactive groups on a novel photo-alignment film surface and elucidate the generation mechanism of pretilt angle. The novel photo-alignment film was prepared by spin-coating a solution of ladderlike polysiloxane (LPS) bearing dual photoreactive group on an ITO surface and by irradiation with linear-polarized ultraviolet (LPUV) light A Si—H terminal compound (M) containing an identical photosensitive part has been used to fabricate a model film for SERS investigation.

Time-dependent density functional theoretical studies on the photo-induced dynamics of an HCI molecule encapsulated in C60 under femtosecond laser pulses

By using first-principles simulations based on time-dependent density functional theory, the chemical reaction of an HCl molecule encapsulated in C60 induced by femtosecond laser pulses is observed. The H atom starts to leave the Cl atom and is reflected by the C60 wall. The coherent nuclear dynamic behaviors of bond breakage and recombination of the HCl molecule occurring in both polarized parallel and perpendicular to the H-Cl bond axis are investigated. The radial oscillation is also found in the two polarization directions of the laser pulse. The relaxation time of the H-Cl bond lengths in transverse polarization is slow in comparison with that in longitudinal polarization. Those results are important for studying the dynamics of the chemical bond at an atomic level.

CHARGE-TRANSFER AND ENERGY-TRANSFER IN THE PHOTO-INDUCED COPOLYMERIZATION OF 2-VINYLNAPHTHALENE WITH MALEIC ANHYDRIDE

The initiation mechanism of the copolymerization of 2-vinylnaphthalene with maleic anhydride was studied under irradiation of 365 nm. The excited complex was formed from (1) the local excitation of 2-vinylnaphthalene followed by the charge-transfer interaction with maleic anhydride and (2) the excitation of the ground state charge-transfer complex, and then it collapsed to 1,4-tetramethylene biradical for initiation. A1: 1 alternating copolymer was formed in different monomer feeds. Addition of benzophenone could greatly enhance the rate of copolymerization through energy-transfer mechanism.

Photo-induced Coupling Reaction of 1,1-Diphenyl-2,2-dicyanoethylene with 10-Methyl-9,10-dihydroacridine

Diphenyl-2, 2-dicyanoethylene reacts with 10-methyl-9, 10-dihydroacridine in deaerated acetonitrile under irradiation with l>320 nm to give the coupling product 1, 1-diphenyl-1-(10-methyl-9-acridinyl)-2, 2-dicyanoethane, which has been characterized by X-ray crystallographic, MS and NMR analyses.

Photo-Induced Thermally Stimulated Depolarization Current (TSDC) in Natural and Synthetic Alexandrite (BeAl2O4:Cr3+)

The investigation of electrical properties in alexandrite (BeAl2O4:Cr3+) in synthetic and natural forms is presented in this paper. Alexandrite is a rare and precious mineral that changes color according to the light incident on it. In the synthetic form, it is used technologically as an active laser medium. The electrical characterization was obtained using the Thermally Stimulated Depolarization Current (TSDC) technique, an interesting tool to study the behavior of impurities in insulators. Alexandrite presented the electric dipole relaxation phenomenon, both in natural and in synthetic samples. It was possible to observe TSDC bands for the synthetic sample at around 170 K, and at around 175 K for the natural sample. Besides, photo-induced TSDC measurements were performed through the excitement of the samples by using a continuous wave argon laser. In addition, photoluminescence measurements were performed to verify in advance whether the laser light would be absorbed by the sample, and in order to complement the photo-induced TSDC measurements analysis. The results of photo-induced TSDC experiments have contributed to the understanding of the TSDC bands behavior: the results obtained with the technique suggest that there is an effective participation of Cr3+ ions in the formation of TSDC bands because they were more intense when the sample was exposed to the argon laser beam.

Direct Photolithography of WO_(x)Nanoparticles for High‑Resolution Non‑Emissive Displays

High-resolution non-emissive displays based on electrochromic tungsten oxides(WOx)are crucial for future near-eye virtual/augmented reality interactions,given their impressive attributes such as high environmental stability,ideal outdoor readability,and low energy consumption.However,the limited intrinsic structure of inorganic materials has presented a significant challenge in achieving precise patterning/pixelation at the micron scale.Here,we successfully developed the direct photolithography for WOx nanoparticles based on in situ photo-induced ligand exchange.This strategy enabled us to achieve ultra-high resolution efficiently(line width<4μm,the best resolution for reported inorganic electrochromic materials).Additionally,the resulting device exhibited impressive electrochromic performance,such as fast response(<1 s at 0 V),high coloration efficiency(119.5 cm^(2) C^(−1)),good optical modulation(55.9%),and durability(>3600 cycles),as well as promising applications in electronic logos,pixelated displays,flexible electronics,etc.The success and advancements presented here are expected to inspire and accelerate research and development(R&D)in high-resolution non-emissive displays and other ultra-fine micro-electronics.

Hierarchically wood-derived integrated electrode with tunable superhydrophilic/superaerophobic surface for efficient urea electrolysis

Conferring surfaces with superhydrophilic/superaerophobic characteristics is desirable for synthesizing efficient gas reaction catalysts.However,complicated procedures,high costs,and poor interfaces hinder commercialization.Here,an integrated electrode with tunable wettability derived from a hierarchically porous wood scaffold was well designed for urea oxidation reaction(UOR).Interestingly,the outer surface of the wood lumen was optimized to the preferred wettability via stoichiometry to promote electrolyte permeation and gas escape.This catalyst exhibits outstanding activity and durability for UOR in alkaline media,requiring only a potential of 1.36 V(vs.RHE)to deliver 10 m A cm^(-2)and maintain its activity without significant decay for 60 h.These experiments and theoretical calculations demonstrate that the nickel(oxy)hydroxide layer formed through surface reconstruction of nickel nanoparticles improves the active sites and intrinsic activity.Moreover,the superwetting properties of the electrode promote mass transfer by guaranteeing substantial contact with the electrolyte and accelerating the separation of gaseous products during electrocatalysis.These findings provide the understanding needed to manipulate the surface wettability through rational design and fabrication of efficient electrocatalysts for gas-evolving processes.

Osteoconductivity of Superhydrophilic Anodized TiO₂Coatings on Ti Treated with Hydrothermal Processes

Surface hydrophilicity is considered to have a strong influence on the biological reactions of bone-substituting materials. However, the influence of a hydrophilic surface on osteoconductivity is not completely clear, especially for superhydrophilic surfaces. In this study, we conferred superhydrophilic properties on anodized TiO2 coatings using a hydrothermal treatment, and developed a method to maintain this surface until implantation. The osteoconductivity of these coatings was evaluated with in vivo tests. A hydrothermal treatment made the surface of as-anodized samples more hydrophilic, up to a water contact angle of 13 (deg.). Storage in both air and distilled water increased the water contact angle after several days because of the adsorption of hydrocarbon. However, storage in phosphate buffered solution led to a reduction in the water contact angle, because of the adsorption of the inorganic ions in the solution, and the sample retained its high hydrophilicity for a long time. As the water contact angle decreased, the hard tissue formation ratio increased continuously up to 58%, which was about four times higher than the hard tissue formation ratio on as-polished Ti.

Superhydrophilic–superhydrophobic patterned surfaces:From simplified fabrication to emerging applications

Superhydrophilic–superhydrophobic patterned surfaces constitute a branch of surface chemistry involving the two extreme states of superhydrophilicity and superhydrophobicity combined on the same surface in precise patterns.Such surfaces have many advantages,including controllable wettability,enrichment ability,accessibility,and the ability to manipulate and pattern water droplets,and they offer new functionalities and possibilities for a wide variety of emerging applications,such as microarrays,biomedical assays,microfluidics,and environmental protection.This review presents the basic theory,simplified fabrication,and emerging applications of superhydrophilic–superhydrophobic patterned surfaces.First,the fundamental theories of wettability that explain the spreading of a droplet on a solid surface are described.Then,the fabrication methods for preparing superhydrophilic–superhydrophobic patterned surfaces are introduced,and the emerging applications of such surfaces that are currently being explored are highlighted.Finally,the remaining challenges of constructing such surfaces and future applications that would benefit from their use are discussed.

Ambient Fast Synthesis of Superaerophobic/Superhydrophilic Electrode for Superior Electrocatalytic Water Oxidation

Developing cost-effective and facile methods to synthesize efficient and stable electrocatalysts for large-scale water splitting is highly desirable but remains a significant challenge.In this study,a facile ambient temperature synthesis of hierarchical nickel-iron(oxy)hydroxides nanosheets on iron foam(FF-FN)with both superhydrophilicity and superaerophobicity is reported.Specifically,the as-fabricated FF-FN electrode demonstrates extraordinary oxygen evolution reaction(OER)activity with an ultralow overpotential of 195 mV at 10 mA cm^(-2)and a small Tafel slope of 34 mV dec^(-1)in alkaline media.Further theoretical investigation indicates that the involved lattice oxygen in nickel-iron-based-oxyhydroxide during electrochemical self-reconstruction can significantly reduce the OER reaction overpotential via the dominated lattice oxygen mechanism.The rechargeable Zn-air battery assembled by directly using the as-prepared FF-FN as cathode displays remarkable cycling performance.It is believed that this work affords an economical approach to steer commercial Fe foam into robust electrocatalysts for sustainable energy conversion and storage systems.

Fully Superhydrophilic, Self-Floatable, and Multi-Contamination-Resistant Solar Steam Generator Inspired by Seaweed

Highly hydrophilic materials enable rapid water delivery and salt redissolution in solar-driven seawater desalination. However, the lack of independent floatability inhibits heat localization at the air/water interface. In nature, seaweeds with internal gas microvesicles can float near the sea surface to ensure photosynthesis. Here, we have developed a seaweed-inspired, independently floatable, but superhydrophilic (SIFS) solar evaporator. It needs no extra floatation support and can simultaneously achieve continuous water pumping and heat concentration. The evaporator resists salt accumulation, oil pollution, microbial corrosion, and protein adsorption. Densely packed hollow glass microbeads promote intrinsic floatability and heat insulation. Superhydrophilic zwitterionic sulfobetaine hydrogel provides a continuous water supply, redissolves the deposited salt, and endows the SIFS evaporator with excellent anti-fouling properties. With its unprecedented anti-contamination ability, this SIFS evaporator is expected to open a new avenue for designing floatable superhydrophilic materials and solving real-world issues of solar steam generation in complex environmental conditions.

Fabrication of superhydrophilic surface on copper substrate by electrochemical deposition and sintering process

Superhydrophilic surfaces were fabricated on copper substrates by an electrochemical deposition and sintering process. Superhydrophobic surfaces were prepared by constructing micro/nano-structure on copper substrates through an electrochemical deposition method. Conversion from superhydrophobic to superhydrophilic was obtained via a suitable sintering process. After reduction sintering, the contact angle of the superhydrophilic surfaces changed from 155° to 0°. The scanning electron microscope （SEM） images show that the morphology of superhydrophobic and superhydrophilic surfaces looks like corals and cells respectively. The chemical composition and crystal structure of these surfaces were examined using energy dispersive spectrometry （EDS） and X-ray diffraction （XRD）. The results show that the main components on superhydrophobic surfaces are Cu, Cu2O and CuO, while the superhydrophilic surfaces are composed of Cu merely. The crystal structure is more inerratic and the grain size becomes bigger after the sintering. The interracial strength of the superhydrophilic surfaces was investigated, showing that the interfacial strength between superhydrophilic layer and copper substrate is considerably high.

Wettability Control between Oleophobic/Superhydrophilic and Superoleophilic/Superhydrophobic Characteristics on the Modified Surface Treated with Fluoroalkyl End-Capped Oligomers/Micro-Sized Polystyrene Particle Composites

Fluoroalkyl end-capped vinyltrimethoxysilane-N,N-dimethylacrylamide cooligomer [RF-(CH2-CHSi(OMe)3)x-(CH2-CHC(=O)NMe2)y-RF;RF = CF(CF3)OC3F7: RF-(VM)x-(DMAA)y-RF] was synthesized by reaction of fluoroalkanoyl peroxide [RF-C(=O)O-O(O=)C-RF] with vinyltrimethoxysilane (VM) and N,N-dimethylacrylamide (DMAA). The modified glass surface treated with the cooligomeric nanoparticles [RF-(VM-SiO3/2)x-(DMAA)y-RF] prepared under the sol-gel reaction of the cooligomer under alkaline conditions was found to exhibit an oleophobic/superhydrophilic property, although the corresponding fluorinated homooligomeric nanoparticles [RF-(VM-SiO3/2)n-RF] afforded an oleophobic/hydrophobic property on the modified surface under similar conditions. RF-(VM-SiO3/2)n-RF/RF-(VM-SiO3/2)x-(DMAA)y-RF/PSt (micro-sized polystyrene particles) composites, which were prepared by the sol-gel reactions of the corresponding homooligomer and cooligomer in the presence of PSt particle under alkaline conditions, provided an oleophobic/superhydrophilic property on the modified surface. However, it was demonstrated that the surface wettability on the modified surface treated with the RF-(VM-SiO3/2)n-RF/RF-(VM-SiO3/2)x-(DMAA)y-RF/PSt composites changes dramatically from oleophobic/superhydrophilic to superoleophilic/superhydrophilic and superoleophilic/superhydrophobic characteristics, increasing with greater feed ratios (mg/mg) of the RF-(VM)n-RF homooligomer in homooligomer/cooligomer from 0 to 100 in the preparation of the composites. Such controlled surfac