A kind of photoelectric system that is suitable to measuring and to testing the damage of the composite material intelligent structure was presented. It can measure the degree of damage of the composite intelligent st...A kind of photoelectric system that is suitable to measuring and to testing the damage of the composite material intelligent structure was presented. It can measure the degree of damage of the composite intelligent structure and it also can tell us the damage position in the structure. This system consists of two parts : software and hardware. Experiments of the damage detection and the analysis of the composite material structure with the photoelectric system were performed, and a series of damage detection experiments was conducted. The results prove that the performance of the system is well and the effects of the measure and test are evident. Through all the experiments, the damage detection technology and test system are approved to be real-time, effective and reliable in the damage detection of the composite intelligent structure.展开更多
The measurement and control of high temperature play very important roles in national defense,military,scientific experiments,industrial and agricultural production.Photoelectric pyrometer is one of the important radi...The measurement and control of high temperature play very important roles in national defense,military,scientific experiments,industrial and agricultural production.Photoelectric pyrometer is one of the important radiation thermometers for non-contact temperature measurement.It has an important application in the field of high temperature measurement,and its performance directly affects the accuracy of temperature measurement.By improving the design of the detection optical system of the photoelectric pyrometer,the imaging performance of the photoelectric pyrometer can be improved effectively,and the temperature measurement accuracy can be improved.In this paper,the temperature measurement principle of photoelectric pyrometer,the wo rking principle of the detection optical system and the composition of the system are introduced.The optical components that affect the imaging of the optical system of the photoelectric pyrometer are analyzed.The optical pyrometer detection optical system is simulated by ZEMAX software,based on the analysis results,the Modulation Transfer Function(MTF)and the spot Diagram are used as the main evaluation criteria to optimize the design of the objective lens of the photoelectric pyrometer detection optical system.The imaging performance of the photoelectric pyrometer detection optical system and the accuracy of temperature measurement of the photoelectric pyrometer are improved by optimization design of the detection optical system.展开更多
Optical glass is the most widely used optical material.It is necessary to measure its geometric characteristic quickly and reliably to meet the quality of optical glass.A vision measuring system combining photoelectri...Optical glass is the most widely used optical material.It is necessary to measure its geometric characteristic quickly and reliably to meet the quality of optical glass.A vision measuring system combining photoelectric autocollimation system with high-precision rotary stage is designed to measure the parallelismand angle of optical glass plane.A novel method is proposed to overcome the difficulty ofmeasuring parallelismof optical glass.The model of parallelism and angle measurement is established and the feasibility is analyzed.The image processing algorithm combining Steger algorithm with the least square method is selected.The uncertainty of angle measurement system for angle measurement is 3.0″.The system can solve the problem of measuring the angle of optical glass with high precision and has important significance for optical system.展开更多
Graphene and related two-dimensional materials have attracted great research interests due to prominently optical and electrical properties and flexibility in integration with versatile photonic structures.Here,we rep...Graphene and related two-dimensional materials have attracted great research interests due to prominently optical and electrical properties and flexibility in integration with versatile photonic structures.Here,we report an in-fiber photoelec-tric device by wrapping a few-layer graphene and bonding a pair of electrodes onto a tilted fiber Bragg grating(TFBG)for photoelectric and electric-induced thermo-optic conversions.The transmitted spectrum from this device consists of a dense comb of narrowband resonances that provides an observable window to sense the photocurrent and the electrical injection in the graphene layer.The device has a wavelength-sensitive photoresponse with responsivity up to 11.4 A/W,allowing the spectrum analysis by real-time monitoring of photocurrent evolution.Based on the thermal-optic effect of electrical injection,the graphene layer is energized to produce a global red-shift of the transmission spectrum of the TF-BG,with a high sensitivity approaching 2.167×10^(4)nm/A^(2).The in-fiber photoelectric device,therefore as a powerful tool,could be widely available as off-the-shelf product for photodetection,spectrometer and current sensor.展开更多
In order to capture and storage video data real-time for carrier-based photoelectric warning system, An acquisition and storage system based on FPGA is designed. To complete the asynchronous interface timing of the ca...In order to capture and storage video data real-time for carrier-based photoelectric warning system, An acquisition and storage system based on FPGA is designed. To complete the asynchronous interface timing of the camera and the storage system, the video data which come from infrared camera and visible light camera is stored to FIFO by FPGA, and then four SDRAM as cache and ping-pong operation cache-data storage to the CF card, this structure not only takes advantage of high-speed reading and writing skills of CF card, but also to ensure the integrity of the video data. In the final experiment proved that the system can be effectively applied to ships the photoelectric warning scanning system, its performance fully meet the needs of practical application.展开更多
<div style="text-align:justify;"> Due to the wave characteristics of light, diffraction occurs when the light passes through the optical system, so that the resolution of the ordinary far-field optical...<div style="text-align:justify;"> Due to the wave characteristics of light, diffraction occurs when the light passes through the optical system, so that the resolution of the ordinary far-field optical system is limited by the size of the Airy disk diameter. There are various factors that cause image quality degradation during system detection and imaging, such as optical system aberrations, atmospheric inter-ference, defocusing, system noise and so on. Super-resolution optical imaging technology is the most innovative breakthrough in the optical imaging and detection field in this century. It goes beyond the resolution limit of ordinary optical systems or detectors, and can get more details and information of the structure, providing unprecedented tools for various fields. Compared with ordinary optical systems, super-resolution systems have very high requirements on the signals to be detected, which cannot be met by ordinary detection techniques. Vacuum photoelectric detection and imaging technology is equipped with the characteristics of high sensitivity and fast response. It is widely used in super-resolution systems and has played a great role in super-resolution systems. In this paper, the principles and structure of the image-converter streak camera super-resolution system, scanning electron microscopy super-resolution system and laser scanning confocal super-resolution system will be sorted out separately, and the essential role of the vacuum photoelectric detection technology in the ultra-microscopic sys-tem will be analyzed. </div>展开更多
Owing to their high luminous efficiency and tunable emission in both red light and far-red light regions,Mn^(4+)ion-activated phosphors have appealed significant interest in photoelectric and energy conversion devices...Owing to their high luminous efficiency and tunable emission in both red light and far-red light regions,Mn^(4+)ion-activated phosphors have appealed significant interest in photoelectric and energy conversion devices such as white light emitting diode(W-LED),plant cultivation LED,and temperature thermometer.Up to now,Mn^(4+)has been widely introduced into the lattices of various inorganic hosts for brightly redemitting phosphors.However,how to correlate the structure-activity relationship between host framework,luminescence property,and photoelectric device is urgently demanded.In this review,we thoroughly summarize the recent advances of Mn^(4+)doped phosphors.Meanwhile,several strategies like co-doping and defect passivation for improving Mn^(4+)emission are also discussed.Most importantly,the relationship between the protocols for tailoring the structures of Mn^(4+)doped phosphors,increased luminescence performance,and the targeted devices with efficient photoelectric and energy conversion efficiency is deeply correlated.Finally,the challenges and perspectives of Mn^(4+)doped phosphors for practical applications are anticipated.We cordially anticipate that this review can deliver a deep comprehension of not only Mn^(4+)luminescence mechanism but also the crystal structure tailoring strategy of phosphors,so as to spur innovative thoughts in designing advanced phosphors and deepening the applications.展开更多
Theβ-Ga_(2)O_(3)films with different thicknesses are prepared by an atomic layer deposition system.The influence of film thickness on the crystal quality is obvious,indicating that the thicker films perform better cr...Theβ-Ga_(2)O_(3)films with different thicknesses are prepared by an atomic layer deposition system.The influence of film thickness on the crystal quality is obvious,indicating that the thicker films perform better crystal quality,which is verified from x-ray diffraction(XRD)and scanning electron microscope(SEM)results.The Ga_(2)O_(3)-based solar blind photodetectors with different thicknesses are fabricated and studied.The experimental results show that the responsivity of the photodetectors increases exponentially with the increase of the film thickness.The photodetectors with inter-fingered structure based on 900 growth cyclesβ-Ga_(2)O_(3)active layers(corresponding film thickness of 58 nm)exhibit the best performances including a low dark current of 134 fA,photo-to-dark current ratio of 1.5×10^(7),photoresponsivity of 1.56 A/W,detectivity of 2.77×10^(14)Jones,and external quantum efficiency of 764.49%at a bias voltage of 10 V under 254-nm DUV illumination.The photoresponse rejection ratio(R_(254)/R_(365))is up to 1.86×10^(5).In addition,we find that the photoelectric characteristics also depend on the finger spacing of the MSM structure.As the finger spacing decreases from 50μm to10μW,the photoresponsivity,detectivity,and external quantum efficiency increase significantly.展开更多
Antimony selenide(Sb2Se3) films are widely used in phase change memory and solar cells due to their stable switching effect and excellent photovoltaic properties. These properties of the films are affected by the film...Antimony selenide(Sb2Se3) films are widely used in phase change memory and solar cells due to their stable switching effect and excellent photovoltaic properties. These properties of the films are affected by the film thickness. A method combining the advantages of Levenberg–Marquardt method and spectral fitting method(LM–SFM) is presented to study the dependence of refractive index(RI), absorption coefficient, optical band gap, Wemple–Di Domenico parameters, dielectric constant and optical electronegativity of the Sb2Se3films on their thickness. The results show that the RI and absorption coefficient of the Sb2Se3films increase with the increase of film thickness, while the optical band gap decreases with the increase of film thickness. Finally, the reasons why the optical and electrical properties of the film change with its thickness are explained by x-ray diffractometer(XRD), energy dispersive x-ray spectrometer(EDS), Mott–Davis state density model and Raman microstructure analysis.展开更多
A hundred years ago, Planck and Einstein and others created quantum theories or quantum mechanics while they explained the photoelectric effect. Planck and Einstein empirically obtained a statistical relationship betw...A hundred years ago, Planck and Einstein and others created quantum theories or quantum mechanics while they explained the photoelectric effect. Planck and Einstein empirically obtained a statistical relationship between the energy of light quantum and the frequency of light but have not studied the physical process and essence of the photoelectric effect, so some photoelectric phenomena are difficult to be explained by existing quantum mechanics currently. In this paper, a dynamical process of orthogonal interaction between a photon and an electron to form a new state of matter in photoelectric effect experiments is studied so finding that the Planck constant is a product value of the mass, length, and velocity of a high-energy particle. The dynamics of the orthogonal collision of matter (particles) can not only give the physical process and essence of the photoelectric effect, but also have great significance for the further development of quantum mechanics. It can physically explain phenomena such as wave-particle duality and quantum entanglement in the motion of high-energy particles. Its prospects can be widely used in cosmic physics, macro physics, and micro physics.展开更多
The photoelectric microneedle treatment instrument is also widely used due to the rapid development of medical cosmetology in China in recent years. It also causes a lot of skin discomfort after the consumers carry ou...The photoelectric microneedle treatment instrument is also widely used due to the rapid development of medical cosmetology in China in recent years. It also causes a lot of skin discomfort after the consumers carry out such projects. This study, which combines small molecule active peptides (RW3) and active collagens and imitates the photoelectric treatment through in vitro and in vivo experiment, finds that small molecule active peptides (RW3) and active collagens have different improvement effects on cell proliferation, migration, anti-UV damage, inhibition of ear swelling and inflammation in mice, repair of UV damage and skin damage caused by microneedles. .展开更多
The effect of deposition temperature on the morphology and optoelectronic performance of Ge/Si QDs grown by magnetron sputtering under low Ge deposition(~4 nm)was investigated by atomic force microscopy,Raman spectros...The effect of deposition temperature on the morphology and optoelectronic performance of Ge/Si QDs grown by magnetron sputtering under low Ge deposition(~4 nm)was investigated by atomic force microscopy,Raman spectroscopy,and photoluminescence(PL)tests.The experimental results indicate that temperatures higher than 750℃effectively increase the crystallization rate and surface smoothness of the Si buffer layer,and temperatures higher than 600℃significantly enhance the migration ability of Ge atoms,thus increasing the probability of Ge atoms meeting and nucleating to form QDs on Si buffer layer,but an excessively high temperature will cause the QDs to undergo an Ostwald ripening process and thus develop into super large islands.In addition,some PL peaks were observed in samples containing small-sized,high-density Ge QDs,the photoelectric properties reflected by these peaks were in good agreement with the corresponding structural characteristics of the grown QDs.Our results demonstrate the viability of preparing high-quality QDs by magnetron sputtering at high deposition rate,and the temperature effect is expected to work in conjunction with other controllable factors to further regulate QD growth,which paves an effective way for the industrial production of QDs that can be used in future devices.展开更多
The paper deals with the designing of an electric drive system used for hybrid electric vehicles. The driving system is realized with an induction motor and a voltage source inverter. Specifically, the application is ...The paper deals with the designing of an electric drive system used for hybrid electric vehicles. The driving system is realized with an induction motor and a voltage source inverter. Specifically, the application is for a series hybrid vehicle powered by electric storage batteries charged by solar batteries. In the first part of the paper the designing of the electric storage batteries and of the photoelectric system is presented. In the second part of the paper some aspects regarding the designing of the induction motor are presented. Then some aspects concerning the voltage source inverter designing are exposed.展开更多
The measurement of the rolling angle of the projectile is one of the key technologies for the terminal correction projectile.To improve the resolution accuracy of the rolling angle in the laser seeker weapon system, t...The measurement of the rolling angle of the projectile is one of the key technologies for the terminal correction projectile.To improve the resolution accuracy of the rolling angle in the laser seeker weapon system, the imaging model of the detector, calculation model of the position and the signal-to-noise ratio(SNR) model of the circuit are built to derive both the correlation between the resolution error of the rolling angle and the spot position, and the relation between the position resolution error and the SNR. Then the influence of each parameter on the SNR is analyzed at large,and the parameters of the circuit are determined. Meanwhile, the SNR and noise voltage of the circuit are calculated according to the SNR model and the decay model of the laser energy. Finally,the actual photoelectric detection circuit is built, whose SNR is measured to be up to 53 d B. It can fully meet the requirement of0.5° for the resolution error of the rolling angle, thereby realizing the analysis of critical technology for photoelectric detection of laser seeker signals.展开更多
The photoelectric device of a scintillation dosimeter converts photons produced by radiation into an electrical signal.Its features directly determine the overall performance of the dosimeter.For a plastic scintillati...The photoelectric device of a scintillation dosimeter converts photons produced by radiation into an electrical signal.Its features directly determine the overall performance of the dosimeter.For a plastic scintillation fiber dosimeter(PSFD)with a current readout mode,systematic studies of the stability and light-dose response were performed for the photomultiplier tube(PMT),silicon photomultiplier(SiPM),avalanche photodiode(APD),and photodiode(PD).The temperature stability,long-term stability,repeatability,signal-to-noise ratio(SNR),and current dose response of the PSFD with the abovementioned photoelectric devices were studied using a pulsed LED light source and the Small Animal Radiation Therapy platform.An exponential relationship between the dark/ne current and temperature was obtained for all the devices.I is shown that the APD is the most sensitive device to temperature,with a current dependence on temperature reaching 6.5%C^(-1)at room temperature,whereas for the other devices this dependence is always<0:6%C^(-1).In terms of long-term stability,the net current of PD can change by up to 4%when working continuously for 8 h and 2%when working intermittently for 32 h,whereas for the other devices,the changes are all<1%.For the dose response,the PMT and SiPM exhibit excellent linear responses and SNRs within the range of 0.1-60 Gy/min For the PSFD with a current readout mode,the performance of the PMT and SiPM is concluded to be better than that of the other devices in the study.In particular,the SiPM,which has a compact size,low bias voltage,and antimagnetic interference,has great advantages for further applications.展开更多
It is difficult for solanum crops to grow continuously during winter in severe cold regions. Thus, a soil heating system for facility agriculture based on solar concentration technology was proposed, and a novel compo...It is difficult for solanum crops to grow continuously during winter in severe cold regions. Thus, a soil heating system for facility agriculture based on solar concentration technology was proposed, and a novel compound parabolic concentration photothermal and photoelectricity device(CTPV) equipped in the system was designed to address this problem. In accordance with the structure of the device, LightTools optical software was selected to analyze the variation trend of the light escape rate of the device with the diff erent incident angles. On the basis of the calculation results, an experimental test system was used to investigate the relationship of the air temperature of the inlet and the outlet, total output power of the solar cells, and photothermal and photoelectricity efficiency of the device with the operation time during a sunny day. Research results reveal that the light escape rate of the device is 5.36% at an incidence angle of 12°. At a velocity of 1.5 m/s, the maximum air temperature of the outlet can reach 55.6 ℃, and the total output power of the solar cells is 474.4 W. The variation of the total power of the solar cells is consistent with the simulation results. The maximum instantaneous heat collection and the maximum photothermal and photoelectricity efficiency of the device are 306 W and 60.4%, respectively, and the average efficiency is 44.9%. This study can serve as a reference for compound parabolic concentration technology applied for soil heating in facility agricultural soil heating systems.展开更多
Cadmium sulfide quantum dots(CdS QDs) are widely used in solar cells, light emitting diodes, photocatalysis, and biological imaging because of their unique optical and electrical properties. However, there are some dr...Cadmium sulfide quantum dots(CdS QDs) are widely used in solar cells, light emitting diodes, photocatalysis, and biological imaging because of their unique optical and electrical properties. However, there are some drawbacks in existing preparation techniques for CdS QDs, such as protection of inert gas, lengthy reaction time, high reaction temperature, poor crystallinity, and non-uniform particle size distribution. In this study, we prepared CdS QDs by liquid phase synthesis under ambient room temperature and atmospheric pressure using sodium alkyl sulfonate, CdCl_2, and Na_2S as capping agent, cadmium, and sulfur sources respectively. This technique offers facile preparation, efficient reaction, low-cost, and controllable particle size. The as-prepared CdS QDs exhibited good crystallinity, excellent monodispersity, and uniform particle size. The responsivity of CdS QDs-based photodetector is greater than 0.3 μA/W, which makes them suitable for use as ultra-violet(UV) detectors.展开更多
Thin nanocrystalline TiO2 films doped by europium ions (Eu3+) were obtained by the sol-gel method. The photoelectric properties of Eu3+-doped TiO2 film electrode sensitized by cis-RuL2(SCN)2·2H2O (L=cis-2,2′-bip...Thin nanocrystalline TiO2 films doped by europium ions (Eu3+) were obtained by the sol-gel method. The photoelectric properties of Eu3+-doped TiO2 film electrode sensitized by cis-RuL2(SCN)2·2H2O (L=cis-2,2′-bipyridine-4,4′-dicarboxlic acid) ruthenium complex were studied. The thin films were characterized by X-ray diffraction, atomic force microscopy and X-ray photoelectron spectroscopy. Effect of doping Eu3+ on microscopic structure and photoelectrical properties were discussed. The result shows that doping europium ions makes specific surface area of these films larger, which contributes to improving the photoelectric properties. It is found that an optimal composition doped with 0.2 mol.% Eu3+ exhibits the highest photoelectric properties. Isc is 0.37 mA·cm-2, which is 0.17 mA·cm-2 bigger than that of un-doped films; Voc is 405 mV, which is 50 mV bigger than that of un-doped films.展开更多
Multi-element array photoelectric detector is the core devices to form a photoelectric detection target with a large field of view.This photoelectric detection target brings about the problem of uneven detection sensi...Multi-element array photoelectric detector is the core devices to form a photoelectric detection target with a large field of view.This photoelectric detection target brings about the problem of uneven detection sensitivity distribution in the detection screen.To improve the uneven detection sensitivity of this photoelectric detection target,this paper analyzes the distribution law of the uneven detection sensitivity of the photoelectric detection target using the multi-element array photoelectric detector,dissects the main factors affecting the detection sensitivity according to the photoelectric detection principle,establishes the calculation model of detection sensitivity of the photoelectric detection target in the different detection areas and proposes a method to improve the detection sensitivity by compensating the gain of each unit photoelectric detector.The analysis of simulation and experimental results show that the proposed method of photoelectric detection target can effectively improve the output signal amplitude of the projectile under the certain detection distance,in particular,the output signal amplitude of the projectile is significantly increased when the projectile passes through the detection blind area.The experimental results are consistent with the simulation results,which verify the effectiveness of the proposed improvement method.展开更多
In this paper,a novel launch dynamics measurement system based on the photoelectric sensor pair is built.The actual muzzle time(i.e.a time duration that originates from the initial movement to the rocket’s departure ...In this paper,a novel launch dynamics measurement system based on the photoelectric sensor pair is built.The actual muzzle time(i.e.a time duration that originates from the initial movement to the rocket’s departure from the muzzle)and the muzzle velocity are measured.Compared with the classical methods,the actual muzzle time is obtained by eliminating the ignition delay.The comparative analysis method is proposed with numerical simulations established by the transfer matrix method for multibody systems.The experiment results indicate that the proposed measurement system can effectively measure the actual muzzle time and reduce the error of classical methods,which match well with the simulation results showing the launch dynamics model is reliable and helpful for further analysis and design of the MLRS.展开更多
文摘A kind of photoelectric system that is suitable to measuring and to testing the damage of the composite material intelligent structure was presented. It can measure the degree of damage of the composite intelligent structure and it also can tell us the damage position in the structure. This system consists of two parts : software and hardware. Experiments of the damage detection and the analysis of the composite material structure with the photoelectric system were performed, and a series of damage detection experiments was conducted. The results prove that the performance of the system is well and the effects of the measure and test are evident. Through all the experiments, the damage detection technology and test system are approved to be real-time, effective and reliable in the damage detection of the composite intelligent structure.
基金Jilin Province Science and Technology Development Plan Project(20190701024GH)。
文摘The measurement and control of high temperature play very important roles in national defense,military,scientific experiments,industrial and agricultural production.Photoelectric pyrometer is one of the important radiation thermometers for non-contact temperature measurement.It has an important application in the field of high temperature measurement,and its performance directly affects the accuracy of temperature measurement.By improving the design of the detection optical system of the photoelectric pyrometer,the imaging performance of the photoelectric pyrometer can be improved effectively,and the temperature measurement accuracy can be improved.In this paper,the temperature measurement principle of photoelectric pyrometer,the wo rking principle of the detection optical system and the composition of the system are introduced.The optical components that affect the imaging of the optical system of the photoelectric pyrometer are analyzed.The optical pyrometer detection optical system is simulated by ZEMAX software,based on the analysis results,the Modulation Transfer Function(MTF)and the spot Diagram are used as the main evaluation criteria to optimize the design of the objective lens of the photoelectric pyrometer detection optical system.The imaging performance of the photoelectric pyrometer detection optical system and the accuracy of temperature measurement of the photoelectric pyrometer are improved by optimization design of the detection optical system.
基金supported in part by the National Natural Science Foundation of China under Grant 51805367part by the Natural Science Foundation of Tianjin under Grant 17JCTPJC54200 and Grant 18JCQNJC04800
文摘Optical glass is the most widely used optical material.It is necessary to measure its geometric characteristic quickly and reliably to meet the quality of optical glass.A vision measuring system combining photoelectric autocollimation system with high-precision rotary stage is designed to measure the parallelismand angle of optical glass plane.A novel method is proposed to overcome the difficulty ofmeasuring parallelismof optical glass.The model of parallelism and angle measurement is established and the feasibility is analyzed.The image processing algorithm combining Steger algorithm with the least square method is selected.The uncertainty of angle measurement system for angle measurement is 3.0″.The system can solve the problem of measuring the angle of optical glass with high precision and has important significance for optical system.
基金We are grateful for financial supports from National Natural Science Foundation of China(Grant No.61975166)Key Research and Development Program(Grant No.2022YFA1404800).
文摘Graphene and related two-dimensional materials have attracted great research interests due to prominently optical and electrical properties and flexibility in integration with versatile photonic structures.Here,we report an in-fiber photoelec-tric device by wrapping a few-layer graphene and bonding a pair of electrodes onto a tilted fiber Bragg grating(TFBG)for photoelectric and electric-induced thermo-optic conversions.The transmitted spectrum from this device consists of a dense comb of narrowband resonances that provides an observable window to sense the photocurrent and the electrical injection in the graphene layer.The device has a wavelength-sensitive photoresponse with responsivity up to 11.4 A/W,allowing the spectrum analysis by real-time monitoring of photocurrent evolution.Based on the thermal-optic effect of electrical injection,the graphene layer is energized to produce a global red-shift of the transmission spectrum of the TF-BG,with a high sensitivity approaching 2.167×10^(4)nm/A^(2).The in-fiber photoelectric device,therefore as a powerful tool,could be widely available as off-the-shelf product for photodetection,spectrometer and current sensor.
文摘In order to capture and storage video data real-time for carrier-based photoelectric warning system, An acquisition and storage system based on FPGA is designed. To complete the asynchronous interface timing of the camera and the storage system, the video data which come from infrared camera and visible light camera is stored to FIFO by FPGA, and then four SDRAM as cache and ping-pong operation cache-data storage to the CF card, this structure not only takes advantage of high-speed reading and writing skills of CF card, but also to ensure the integrity of the video data. In the final experiment proved that the system can be effectively applied to ships the photoelectric warning scanning system, its performance fully meet the needs of practical application.
文摘<div style="text-align:justify;"> Due to the wave characteristics of light, diffraction occurs when the light passes through the optical system, so that the resolution of the ordinary far-field optical system is limited by the size of the Airy disk diameter. There are various factors that cause image quality degradation during system detection and imaging, such as optical system aberrations, atmospheric inter-ference, defocusing, system noise and so on. Super-resolution optical imaging technology is the most innovative breakthrough in the optical imaging and detection field in this century. It goes beyond the resolution limit of ordinary optical systems or detectors, and can get more details and information of the structure, providing unprecedented tools for various fields. Compared with ordinary optical systems, super-resolution systems have very high requirements on the signals to be detected, which cannot be met by ordinary detection techniques. Vacuum photoelectric detection and imaging technology is equipped with the characteristics of high sensitivity and fast response. It is widely used in super-resolution systems and has played a great role in super-resolution systems. In this paper, the principles and structure of the image-converter streak camera super-resolution system, scanning electron microscopy super-resolution system and laser scanning confocal super-resolution system will be sorted out separately, and the essential role of the vacuum photoelectric detection technology in the ultra-microscopic sys-tem will be analyzed. </div>
基金financially supported by the National Natural Science Foundation of China(52072101,51972088,U20A20122 and U1663225)the Program for Changjiang Scholars and Innovative Research Team in University(IRT_15R52)of the Chinese Ministry of Education+2 种基金the Program of Introducing Talents of Discipline to Universities-Plan 111(Grant No.B20002)from the Ministry of Science and Technology and the Ministry of Education of ChinaHubei Provincial Department of Education for the“Chutian Scholar”programsupported by the European Commission Interreg V FranceWallonie-Vlaanderen project“Depollut Air”。
文摘Owing to their high luminous efficiency and tunable emission in both red light and far-red light regions,Mn^(4+)ion-activated phosphors have appealed significant interest in photoelectric and energy conversion devices such as white light emitting diode(W-LED),plant cultivation LED,and temperature thermometer.Up to now,Mn^(4+)has been widely introduced into the lattices of various inorganic hosts for brightly redemitting phosphors.However,how to correlate the structure-activity relationship between host framework,luminescence property,and photoelectric device is urgently demanded.In this review,we thoroughly summarize the recent advances of Mn^(4+)doped phosphors.Meanwhile,several strategies like co-doping and defect passivation for improving Mn^(4+)emission are also discussed.Most importantly,the relationship between the protocols for tailoring the structures of Mn^(4+)doped phosphors,increased luminescence performance,and the targeted devices with efficient photoelectric and energy conversion efficiency is deeply correlated.Finally,the challenges and perspectives of Mn^(4+)doped phosphors for practical applications are anticipated.We cordially anticipate that this review can deliver a deep comprehension of not only Mn^(4+)luminescence mechanism but also the crystal structure tailoring strategy of phosphors,so as to spur innovative thoughts in designing advanced phosphors and deepening the applications.
基金Project supported by the Natural Science Basic Research Program of Shaanxi Province,China(Grant No.2022JQ-701)the Scientific Research Program Funded by Shaanxi Provincial Education Department,China(Grant No.21JK0919)。
文摘Theβ-Ga_(2)O_(3)films with different thicknesses are prepared by an atomic layer deposition system.The influence of film thickness on the crystal quality is obvious,indicating that the thicker films perform better crystal quality,which is verified from x-ray diffraction(XRD)and scanning electron microscope(SEM)results.The Ga_(2)O_(3)-based solar blind photodetectors with different thicknesses are fabricated and studied.The experimental results show that the responsivity of the photodetectors increases exponentially with the increase of the film thickness.The photodetectors with inter-fingered structure based on 900 growth cyclesβ-Ga_(2)O_(3)active layers(corresponding film thickness of 58 nm)exhibit the best performances including a low dark current of 134 fA,photo-to-dark current ratio of 1.5×10^(7),photoresponsivity of 1.56 A/W,detectivity of 2.77×10^(14)Jones,and external quantum efficiency of 764.49%at a bias voltage of 10 V under 254-nm DUV illumination.The photoresponse rejection ratio(R_(254)/R_(365))is up to 1.86×10^(5).In addition,we find that the photoelectric characteristics also depend on the finger spacing of the MSM structure.As the finger spacing decreases from 50μm to10μW,the photoresponsivity,detectivity,and external quantum efficiency increase significantly.
基金supported by the National Natural Science Foundation of China (Grant Nos. 62075109, 62135011, 62075107, and 61935006)K. C. Wong Magna Fund in Ningbo University。
文摘Antimony selenide(Sb2Se3) films are widely used in phase change memory and solar cells due to their stable switching effect and excellent photovoltaic properties. These properties of the films are affected by the film thickness. A method combining the advantages of Levenberg–Marquardt method and spectral fitting method(LM–SFM) is presented to study the dependence of refractive index(RI), absorption coefficient, optical band gap, Wemple–Di Domenico parameters, dielectric constant and optical electronegativity of the Sb2Se3films on their thickness. The results show that the RI and absorption coefficient of the Sb2Se3films increase with the increase of film thickness, while the optical band gap decreases with the increase of film thickness. Finally, the reasons why the optical and electrical properties of the film change with its thickness are explained by x-ray diffractometer(XRD), energy dispersive x-ray spectrometer(EDS), Mott–Davis state density model and Raman microstructure analysis.
文摘A hundred years ago, Planck and Einstein and others created quantum theories or quantum mechanics while they explained the photoelectric effect. Planck and Einstein empirically obtained a statistical relationship between the energy of light quantum and the frequency of light but have not studied the physical process and essence of the photoelectric effect, so some photoelectric phenomena are difficult to be explained by existing quantum mechanics currently. In this paper, a dynamical process of orthogonal interaction between a photon and an electron to form a new state of matter in photoelectric effect experiments is studied so finding that the Planck constant is a product value of the mass, length, and velocity of a high-energy particle. The dynamics of the orthogonal collision of matter (particles) can not only give the physical process and essence of the photoelectric effect, but also have great significance for the further development of quantum mechanics. It can physically explain phenomena such as wave-particle duality and quantum entanglement in the motion of high-energy particles. Its prospects can be widely used in cosmic physics, macro physics, and micro physics.
文摘The photoelectric microneedle treatment instrument is also widely used due to the rapid development of medical cosmetology in China in recent years. It also causes a lot of skin discomfort after the consumers carry out such projects. This study, which combines small molecule active peptides (RW3) and active collagens and imitates the photoelectric treatment through in vitro and in vivo experiment, finds that small molecule active peptides (RW3) and active collagens have different improvement effects on cell proliferation, migration, anti-UV damage, inhibition of ear swelling and inflammation in mice, repair of UV damage and skin damage caused by microneedles. .
基金Founded by the National Key Research and Development Program(No.2021YFB3802400)the National Natural Science Foundation of China(No.52161037)the Basic Research Project of Yunnan Province(No.202001AU070112)。
文摘The effect of deposition temperature on the morphology and optoelectronic performance of Ge/Si QDs grown by magnetron sputtering under low Ge deposition(~4 nm)was investigated by atomic force microscopy,Raman spectroscopy,and photoluminescence(PL)tests.The experimental results indicate that temperatures higher than 750℃effectively increase the crystallization rate and surface smoothness of the Si buffer layer,and temperatures higher than 600℃significantly enhance the migration ability of Ge atoms,thus increasing the probability of Ge atoms meeting and nucleating to form QDs on Si buffer layer,but an excessively high temperature will cause the QDs to undergo an Ostwald ripening process and thus develop into super large islands.In addition,some PL peaks were observed in samples containing small-sized,high-density Ge QDs,the photoelectric properties reflected by these peaks were in good agreement with the corresponding structural characteristics of the grown QDs.Our results demonstrate the viability of preparing high-quality QDs by magnetron sputtering at high deposition rate,and the temperature effect is expected to work in conjunction with other controllable factors to further regulate QD growth,which paves an effective way for the industrial production of QDs that can be used in future devices.
文摘The paper deals with the designing of an electric drive system used for hybrid electric vehicles. The driving system is realized with an induction motor and a voltage source inverter. Specifically, the application is for a series hybrid vehicle powered by electric storage batteries charged by solar batteries. In the first part of the paper the designing of the electric storage batteries and of the photoelectric system is presented. In the second part of the paper some aspects regarding the designing of the induction motor are presented. Then some aspects concerning the voltage source inverter designing are exposed.
基金supported by the National Natural Science Foundation of China(61201391)
文摘The measurement of the rolling angle of the projectile is one of the key technologies for the terminal correction projectile.To improve the resolution accuracy of the rolling angle in the laser seeker weapon system, the imaging model of the detector, calculation model of the position and the signal-to-noise ratio(SNR) model of the circuit are built to derive both the correlation between the resolution error of the rolling angle and the spot position, and the relation between the position resolution error and the SNR. Then the influence of each parameter on the SNR is analyzed at large,and the parameters of the circuit are determined. Meanwhile, the SNR and noise voltage of the circuit are calculated according to the SNR model and the decay model of the laser energy. Finally,the actual photoelectric detection circuit is built, whose SNR is measured to be up to 53 d B. It can fully meet the requirement of0.5° for the resolution error of the rolling angle, thereby realizing the analysis of critical technology for photoelectric detection of laser seeker signals.
基金supported by the China Postdoctoral Science Foundation(No.2017M621818)the National Key Research and Development Project(Nos.2017YFF0206205 and2016YFB0501303)+1 种基金the National Natural Science Foundation of China(Nos.51873137 and 11705123)the Project of the State Key Laboratory of Radiation Medicine and Protection Soochow University(No.GZN1201801)。
文摘The photoelectric device of a scintillation dosimeter converts photons produced by radiation into an electrical signal.Its features directly determine the overall performance of the dosimeter.For a plastic scintillation fiber dosimeter(PSFD)with a current readout mode,systematic studies of the stability and light-dose response were performed for the photomultiplier tube(PMT),silicon photomultiplier(SiPM),avalanche photodiode(APD),and photodiode(PD).The temperature stability,long-term stability,repeatability,signal-to-noise ratio(SNR),and current dose response of the PSFD with the abovementioned photoelectric devices were studied using a pulsed LED light source and the Small Animal Radiation Therapy platform.An exponential relationship between the dark/ne current and temperature was obtained for all the devices.I is shown that the APD is the most sensitive device to temperature,with a current dependence on temperature reaching 6.5%C^(-1)at room temperature,whereas for the other devices this dependence is always<0:6%C^(-1).In terms of long-term stability,the net current of PD can change by up to 4%when working continuously for 8 h and 2%when working intermittently for 32 h,whereas for the other devices,the changes are all<1%.For the dose response,the PMT and SiPM exhibit excellent linear responses and SNRs within the range of 0.1-60 Gy/min For the PSFD with a current readout mode,the performance of the PMT and SiPM is concluded to be better than that of the other devices in the study.In particular,the SiPM,which has a compact size,low bias voltage,and antimagnetic interference,has great advantages for further applications.
基金the financial support for this research provided by the National Natural Science Foundation of China (No. 51966012) ProjectProgram for Young Talents of Science and Technology in Universities of Inner Mongolia Autonomous Region (No. NJYT-18-A12)+2 种基金Research Program of Science and Technology at Universities of Inner Mongolia Autonomous Region (No. NJZY17491)Major science and Technology Projects in Inner Mongolia (2018)Inner Mongolia Autonomous Region Graduate Research Innovation Project (No. S20201156Z)。
文摘It is difficult for solanum crops to grow continuously during winter in severe cold regions. Thus, a soil heating system for facility agriculture based on solar concentration technology was proposed, and a novel compound parabolic concentration photothermal and photoelectricity device(CTPV) equipped in the system was designed to address this problem. In accordance with the structure of the device, LightTools optical software was selected to analyze the variation trend of the light escape rate of the device with the diff erent incident angles. On the basis of the calculation results, an experimental test system was used to investigate the relationship of the air temperature of the inlet and the outlet, total output power of the solar cells, and photothermal and photoelectricity efficiency of the device with the operation time during a sunny day. Research results reveal that the light escape rate of the device is 5.36% at an incidence angle of 12°. At a velocity of 1.5 m/s, the maximum air temperature of the outlet can reach 55.6 ℃, and the total output power of the solar cells is 474.4 W. The variation of the total power of the solar cells is consistent with the simulation results. The maximum instantaneous heat collection and the maximum photothermal and photoelectricity efficiency of the device are 306 W and 60.4%, respectively, and the average efficiency is 44.9%. This study can serve as a reference for compound parabolic concentration technology applied for soil heating in facility agricultural soil heating systems.
基金Project supported by the Equipment Pre-research Fund under the Equipment Development Department(EDD)of China’s Central Military Commission(CMC)(Grant No.1422030209)the Innovation Team Program of NORINCO Group(Grant No.2017CX024)the National Natural Science Foundation of China(Grant Nos.61106098 and 11864044)
文摘Cadmium sulfide quantum dots(CdS QDs) are widely used in solar cells, light emitting diodes, photocatalysis, and biological imaging because of their unique optical and electrical properties. However, there are some drawbacks in existing preparation techniques for CdS QDs, such as protection of inert gas, lengthy reaction time, high reaction temperature, poor crystallinity, and non-uniform particle size distribution. In this study, we prepared CdS QDs by liquid phase synthesis under ambient room temperature and atmospheric pressure using sodium alkyl sulfonate, CdCl_2, and Na_2S as capping agent, cadmium, and sulfur sources respectively. This technique offers facile preparation, efficient reaction, low-cost, and controllable particle size. The as-prepared CdS QDs exhibited good crystallinity, excellent monodispersity, and uniform particle size. The responsivity of CdS QDs-based photodetector is greater than 0.3 μA/W, which makes them suitable for use as ultra-violet(UV) detectors.
文摘Thin nanocrystalline TiO2 films doped by europium ions (Eu3+) were obtained by the sol-gel method. The photoelectric properties of Eu3+-doped TiO2 film electrode sensitized by cis-RuL2(SCN)2·2H2O (L=cis-2,2′-bipyridine-4,4′-dicarboxlic acid) ruthenium complex were studied. The thin films were characterized by X-ray diffraction, atomic force microscopy and X-ray photoelectron spectroscopy. Effect of doping Eu3+ on microscopic structure and photoelectrical properties were discussed. The result shows that doping europium ions makes specific surface area of these films larger, which contributes to improving the photoelectric properties. It is found that an optimal composition doped with 0.2 mol.% Eu3+ exhibits the highest photoelectric properties. Isc is 0.37 mA·cm-2, which is 0.17 mA·cm-2 bigger than that of un-doped films; Voc is 405 mV, which is 50 mV bigger than that of un-doped films.
基金supported by Project of the Xi’an Science and Technology Innovation talent service enterprise project(No.2020KJRC0041)National Natural Science Foundation of China(No.62073256)Key Programs of Shaanxi Science and Technology Department(No.2020GY-125)。
文摘Multi-element array photoelectric detector is the core devices to form a photoelectric detection target with a large field of view.This photoelectric detection target brings about the problem of uneven detection sensitivity distribution in the detection screen.To improve the uneven detection sensitivity of this photoelectric detection target,this paper analyzes the distribution law of the uneven detection sensitivity of the photoelectric detection target using the multi-element array photoelectric detector,dissects the main factors affecting the detection sensitivity according to the photoelectric detection principle,establishes the calculation model of detection sensitivity of the photoelectric detection target in the different detection areas and proposes a method to improve the detection sensitivity by compensating the gain of each unit photoelectric detector.The analysis of simulation and experimental results show that the proposed method of photoelectric detection target can effectively improve the output signal amplitude of the projectile under the certain detection distance,in particular,the output signal amplitude of the projectile is significantly increased when the projectile passes through the detection blind area.The experimental results are consistent with the simulation results,which verify the effectiveness of the proposed improvement method.
文摘In this paper,a novel launch dynamics measurement system based on the photoelectric sensor pair is built.The actual muzzle time(i.e.a time duration that originates from the initial movement to the rocket’s departure from the muzzle)and the muzzle velocity are measured.Compared with the classical methods,the actual muzzle time is obtained by eliminating the ignition delay.The comparative analysis method is proposed with numerical simulations established by the transfer matrix method for multibody systems.The experiment results indicate that the proposed measurement system can effectively measure the actual muzzle time and reduce the error of classical methods,which match well with the simulation results showing the launch dynamics model is reliable and helpful for further analysis and design of the MLRS.