The bending photonic crystal fiber grating sensor is an important role in underwater monitoring and fire alarm systems. It is studied that the resonant wavelength expression of bending long period photonic crystal fib...The bending photonic crystal fiber grating sensor is an important role in underwater monitoring and fire alarm systems. It is studied that the resonant wavelength expression of bending long period photonic crystal fiber gratings is deduced, it is designed that a bending long period photonic crystal fiber grating sensor system, it is calculated in theory that between the bending long period photonic crystal fiber gratings sensor resonance wavelength and the grating period and the bending strain. The result is shown by calculating and analysing in theory, the grating curvature is increased by the increase of the bending strain of the grating, and the resonance wavelength of the grating sensor is drifted, the drift amount is increased, one in this grating, the drifted amount of the resonant wavelength is 0.014 nm.展开更多
Long-period gratings （LPGs） are fabricated in a photonic crystal fiber （PCF） using the symmetric point- by-point CO2 laser irradiation method to explore the sensitivity characterization of PCF-LPG. Numerical sim- ...Long-period gratings （LPGs） are fabricated in a photonic crystal fiber （PCF） using the symmetric point- by-point CO2 laser irradiation method to explore the sensitivity characterization of PCF-LPG. Numerical sim- ulation is used to guide the investigation. It is found that the refractive index （RI） sensitivity of PCF-LPG depends on the coupled cladding modes as well as the coupled resonance wavelength （RW） of the LPG. Experimental studies show that the longer the RW, the higher the RI sensitivity for the same cladding mode. At similar RWs, the lower the cladding mode, the higher the RI sensitivity of PCF-LPG.展开更多
We report a novel lateral cavity surface emitting laser based on sub-wavelength high-index-contrast grating with in-plane resonance and surface-normal emission. The device is fabricated on a simple commercial wafer wi...We report a novel lateral cavity surface emitting laser based on sub-wavelength high-index-contrast grating with in-plane resonance and surface-normal emission. The device is fabricated on a simple commercial wafer without the distributed Bragg reflector and it needs no wafer bonding. It exhibits a side mode suppression ratio of 23.0 d B and a high output power of 5.32 m W at 1552.44 nm. The specific single mode lasing agrees well with the band edge mode calculation of the grating. In 3D simulation, we observe obvious light output from the grating.展开更多
文摘The bending photonic crystal fiber grating sensor is an important role in underwater monitoring and fire alarm systems. It is studied that the resonant wavelength expression of bending long period photonic crystal fiber gratings is deduced, it is designed that a bending long period photonic crystal fiber grating sensor system, it is calculated in theory that between the bending long period photonic crystal fiber gratings sensor resonance wavelength and the grating period and the bending strain. The result is shown by calculating and analysing in theory, the grating curvature is increased by the increase of the bending strain of the grating, and the resonance wavelength of the grating sensor is drifted, the drift amount is increased, one in this grating, the drifted amount of the resonant wavelength is 0.014 nm.
基金supported by the United States National Science Foundation under Grant No.DMR-1206669the Ministry of Education,Youth,and Sport of the Czech Republic under Grant No.LH 11038 within the U.S.–Czech S&T Cooperation agreement
文摘Long-period gratings （LPGs） are fabricated in a photonic crystal fiber （PCF） using the symmetric point- by-point CO2 laser irradiation method to explore the sensitivity characterization of PCF-LPG. Numerical sim- ulation is used to guide the investigation. It is found that the refractive index （RI） sensitivity of PCF-LPG depends on the coupled cladding modes as well as the coupled resonance wavelength （RW） of the LPG. Experimental studies show that the longer the RW, the higher the RI sensitivity for the same cladding mode. At similar RWs, the lower the cladding mode, the higher the RI sensitivity of PCF-LPG.
基金Project supported by the Chinese National Key Basic Research Special Fund/CNKBRSF(Nos.2012CB933501,2011CB922002)the National Natural Science Foundation of China(Nos.61025025,61137003,61234004,61021003)the National High Technology Research and Development Program of China(No.2012AA012202)
文摘We report a novel lateral cavity surface emitting laser based on sub-wavelength high-index-contrast grating with in-plane resonance and surface-normal emission. The device is fabricated on a simple commercial wafer without the distributed Bragg reflector and it needs no wafer bonding. It exhibits a side mode suppression ratio of 23.0 d B and a high output power of 5.32 m W at 1552.44 nm. The specific single mode lasing agrees well with the band edge mode calculation of the grating. In 3D simulation, we observe obvious light output from the grating.
