Imaging properties of a tetra wedge readout

The decoding principle of a tetra wedge anode, which is a development of the wedge and strip anode, is described. The influence of charge cloud size on decoding accuracy is studied using the Monte Carlo method. Simulation results show that the decoding error is large when the size of charge clouds collected by the anode is small. Thus, the charge clouds collected by the tetra wedge anode should reach a necessary size to ensure accurate decoding. Finally, using the ultraviolet photon counting imaging system, the linearity and the spatial resolution of the system are tested. Experimental results show that the system has a good linearity and the spatial resolution is better than 100 μm.

An FPGA-Based Pulse Pile-up Rejection Technique for Photon Counting Imaging Detectors

A novel FPGA-based pulse pile-up rejection method for single photon imaging detectors is reported. Tile method is easy to implement in FPGAs for real-time data processing. The rejection principle and entire design are introduced in detail. The photon counting imaging detector comprises a micro-channel plate （MCP） stack, and a wedge and strip anode （WSA）. The resolution mask pattern in front of the MCP can be reconstructed after data processing in the FPGA. For high count rates, the rejection design can effectively reduce the impact of the pulse pile-up on the image. The resolution can reach up to 140μm. The pulse pile-up rejection design can also be applied to high-energy physics and particle detection.

Multiple super-resolution imaging in the second band of gradient lattice spacing photonic crystal flat lens

Based on the triangular lattice two-dimensional photonic crystal(PC), the lattice spacing along the transverse direction to propagation is altered, and a gradient PC(GPC) flat lens is designed. The band structures and equal frequency curves of the GPC are calculated;then, the imaging mechanism and feasibility are analyzed. The imaging characteristics of the GPC flat lens are investigated. It is observed that the GPC can achieve multiple types of super-resolution imaging for the point source. This GPC lens is allowed to be applied to imaging and other fields such as filtering and sensing.

GASTROINTESTINAL ABNORMALITIES IDENTIFIED BY FLUORESCENCE ENDOMICROSCOPY

Real-tine in vivo microscopic imaging has becomne a reality with the advent of confocal and nonlinear endomicroscopy.These devices are best utilized in conjunction with standard white light endoscopy.We evaluated the use of fuorescence endomicroscopy in detecting microscopic abnormalities in colonic tisues.Mice of C57bl/6 strain had intraperitoneal injection with azoxymethane once every week for five weeks and littermates,not exposed to azoxymethane served as controls.After 14 weeks,intestines were imaged by fuorescence endomicroscopy.The images show obvious cellular structural diferences between those two groups of mice.The difference in endomicroscopy imaging can be used for identifying tissues suspicious for neoplasia or other changes,leading to early diagnosis of gastrointestinal track of cancer.

Two-dimensional photon counting imaging detector based on a Vernier position sensitive anode readout

A two-dimensional photon counting imaging detector based on a Vernier position sensitive anode is reported. The decode principle and design of a two-dimensional Vernier anode are introduced in detail. A photon counting imaging system was built based on a Vernier anode. The image of very weak optical radiation can be reconstructed by image processing in a period of integration time. The resolution is superior to 100 μm according to the resolution test. The detector may realize the imaging of very weak particle flow of highenergy photons, electrons and ions, so it can be used for high-energy physics, deep space exploration, spectral measurement and bio-luminescence detection.

Time-resolved multiple imaging by detecting photons with changeable wavelengths

Transporting information is one of the important functions of photons and is also the essential duty of information science. Here, we realize multiple imaging by detecting photons with changeable wavelengths based on time-resolved correlation measurements. In our system, information from multiple objects can be transported. During this process, the wavelength of the photons illuminating the objects is different from the wavelength of the photons detected by the detectors. More importantly, the wavelength of the photons that are utilized to record images can also be changed to match the sensitive range of the used detectors. In our experiment, images of the objects are reconstructed clearly by detecting the photons at wavelengths of 650, 810, and 1064 nm, respectively. These properties should have potential applications in information science.

Single Photon Compressive Imaging Based on Digital Grayscale Modulation Method

In single-pixel imaging or computational ghost imaging,the measurement matrix has a great impact on the performance of the imaging system,because it involves modulation of the optical signal and image reconstruction.The measurement matrix reported in the existing literatures is first binarized and then loaded onto the digital micro-mirror device(DMD)for optical modulation,that is,each pixel can only be modulated into on-off states.In this paper,we propose a digital grayscale modulation method for more efficient compressive sampling.On the basis of this,we demonstrate a single photon compressive imaging system.A control and counting circuit,based on field-programmable gate array(FPGA),is developed to control DMD to conduct digital grayscale modulation and count single-photon pulse output from the photomultiplier tube(PMT)simultaneously.The experimental results show that the imaging reconstruction quality can be improved by increasing the sparsity ratio properly and compressive sampling ratio(SR)of these gray-scale matrices.However,when the compressive SR and sparsity ratio are increased appropriately to a certain value,the reconstruction quality is usually saturated,and the imaging reconstruction quality of the digital grayscale modulation is better than that of binary modulation.

Development and evaluation of a double-plane detector system for multi-radionuclide imaging

Purpose To develop a multi-radionuclide imaging system with a flexible and compact structure that has a potential for breast and other applications,and to evaluate its performances under both positron emission tomography and single photon emission imaging conditions.Methods The plane detector was composed of 5×6 blocks with an effective detection area of 168.6 mm×202.4 mm.Each block consisted of a 16×16 LYSO array.The pixel size is 1.9 mm×1.9 mm×15 mm.An 8×8 silicon photomultiplier(SiPM)array with SensL’s C-30035 sensors was coupled to the LYSO array,separated by a 1.5-mm-thick glass.To minimize the influence of temperature on the detector,the active part of the front-end electronics was kept away from SiPMs.Self-designed data acquisition system and reconstruction software were utilized to evaluate the performances of the whole system.Results All the blocks had excellent pixels identification.An average energy resolution of 11.39%for 511 keV and 21.37%for 140 keV was obtained.In the PET mode,the best spatial resolution was better than 2 mm and the system sensitivity reached up to 11.05%at 60 mm distance.In the single photon emission imaging mode,a spatial resolution better than 3 mm was obtained.Conclusion The results indicated that the system has a good overall performance and can be used in breast imaging and other general PET applications.It also has the potential to be used for single photon emission imaging.In pursuit of a better spatial resolution of cross-plane,PSF and DOI technology will be developed in the next work.For specific applications,further improvement of the detector system such as performance evaluation with phantoms will be carried out.

Decoding algorithms of single photon counting imager based on two-dimensional Vernier anodes

The decoding algorithms of two-dimensional Vernier anodes are deduced theoretically.The precision of decoding and uniqueness of encoding are proved.The influencing factors of detection sensitivity and spatial resolution are discussed.The single photon imaging system is constructed,and the two-dimensional Vernier collector is fabricated.The image of the ultra-weak emission source is reconstructed.The spatial resolution of the system is about 100μm.