We propose and experimentally demonstrate a 2×2 thermo-optic(TO) crossbar switch implemented by dual photonic crystal nanobeam(PCN)cavities within a silicon-on-insulator(SOI)platform.By thermally tuning the refra...We propose and experimentally demonstrate a 2×2 thermo-optic(TO) crossbar switch implemented by dual photonic crystal nanobeam(PCN)cavities within a silicon-on-insulator(SOI)platform.By thermally tuning the refractive index of silicon,the resonance wavelength of the PCN cavities can be red-shifted.With the help of the ultrasmall mode volumes of the PCN cavities,only～0.16 mW power is needed to change the switching state.With a spectral passband of 0.09 nm at the 1583.75 nm operation wavelength,the insertion loss(IL)and crosstalk(CT)performances were measured as IL(bar)=-0.2 dB,CT(bar)=-15 dB,IL(cross)=-1.5 dB,and CT(cross)=-15 dB.Furthermore,the thermal tuning efficiency of the fabricated device is as high as1.23 nm/mW.展开更多
Strong nonlinearity of plasmonic metamaterials can be designed near their effective plasma frequency in the epsilon-near-zero(ENZ) regime. We explore the realization of an all-optical modulator based on the Au nonline...Strong nonlinearity of plasmonic metamaterials can be designed near their effective plasma frequency in the epsilon-near-zero(ENZ) regime. We explore the realization of an all-optical modulator based on the Au nonlinearity using an ENZ cavity formed by a few Au nanorods inside a Si photonic waveguide. The resulting modulator has robust performance with a modulation depth of about 30 dB/μm and loss less than 0.8 dB for switching energies below 600 fJ. The modulator provides a double advantage of high mode transmission and strong nonlinearity enhancement in the few-nanorod-based design.展开更多
We express a photonic packet switch prototype based on optical label processing methods which dramatically increase the label processing capability. We experimentally demonstrate 40Gbit/s/port packet switching and opt...We express a photonic packet switch prototype based on optical label processing methods which dramatically increase the label processing capability. We experimentally demonstrate 40Gbit/s/port packet switching and optical buffering capabilities of the prototype.展开更多
2.5 Gbit/s ATM optical switching experimental system has been achieved for the first time in P.R.China.This poper describes the architecture of the ATM optical switching system.and gives some key technologies forreali...2.5 Gbit/s ATM optical switching experimental system has been achieved for the first time in P.R.China.This poper describes the architecture of the ATM optical switching system.and gives some key technologies forrealization,e.g. photonic switching matrix, header identification, etc. In addition, the performance, analysis andexperimental results are given.展开更多
We demonstrate the generation of Q-switched pulses from an ytterbium-doped fiber laser（YDFL） using quantum dot（QD） CdSe as a passive saturable absorber（SA）. The CdSe QD is fabricated by the synthesis of CdO,Se, ...We demonstrate the generation of Q-switched pulses from an ytterbium-doped fiber laser（YDFL） using quantum dot（QD） CdSe as a passive saturable absorber（SA）. The CdSe QD is fabricated by the synthesis of CdO,Se, and manganese acetate and paraffin oil and oleic acid as the solvent and surfactant, respectively. The CdSe QD is then doped into poly-methyl-methacrylate（PMMA） via an emulsion polymerization process. A PMMAhosted CdSe QD thin flake with a homogeneous end surface is then formed and placed between two ferrules and assembled in a YDFL cavity to achieve the Q-switching operation with a repetition rate of 24.45 to 40.50 kHz while varying the pump power from 975 to 1196 mW. The pulse width changes from 6.78 to 3.65 μs with a maximum calculated pulse energy at 0.77 μJ at a pump power of 1101 mW. This work may be the first demonstration of CdSe QD-based Q-switching in an all-fiber configuration that should give proportional insight into semiconductor QD materials in photonics applications.展开更多
基金National Natural Science Foundation of China(NSFC)(61235007,61505104,61605112)Science and Technology Commission of Shanghai Municipality(15ZR1422800,16XD1401400)National Key R&D Program of China(2016YFB0402501)
文摘We propose and experimentally demonstrate a 2×2 thermo-optic(TO) crossbar switch implemented by dual photonic crystal nanobeam(PCN)cavities within a silicon-on-insulator(SOI)platform.By thermally tuning the refractive index of silicon,the resonance wavelength of the PCN cavities can be red-shifted.With the help of the ultrasmall mode volumes of the PCN cavities,only～0.16 mW power is needed to change the switching state.With a spectral passband of 0.09 nm at the 1583.75 nm operation wavelength,the insertion loss(IL)and crosstalk(CT)performances were measured as IL(bar)=-0.2 dB,CT(bar)=-15 dB,IL(cross)=-1.5 dB,and CT(cross)=-15 dB.Furthermore,the thermal tuning efficiency of the fabricated device is as high as1.23 nm/mW.
基金Engineering and Physical Sciences Research Council(EPSRC)H2020 European Research Council(ERC)project iPLASMM(321268)+2 种基金Royal SocietyWolfson FoundationEuropean Commission(EC)FP7 project(304179)(Marie Curie Actions)
文摘Strong nonlinearity of plasmonic metamaterials can be designed near their effective plasma frequency in the epsilon-near-zero(ENZ) regime. We explore the realization of an all-optical modulator based on the Au nonlinearity using an ENZ cavity formed by a few Au nanorods inside a Si photonic waveguide. The resulting modulator has robust performance with a modulation depth of about 30 dB/μm and loss less than 0.8 dB for switching energies below 600 fJ. The modulator provides a double advantage of high mode transmission and strong nonlinearity enhancement in the few-nanorod-based design.
文摘We express a photonic packet switch prototype based on optical label processing methods which dramatically increase the label processing capability. We experimentally demonstrate 40Gbit/s/port packet switching and optical buffering capabilities of the prototype.
文摘2.5 Gbit/s ATM optical switching experimental system has been achieved for the first time in P.R.China.This poper describes the architecture of the ATM optical switching system.and gives some key technologies forrealization,e.g. photonic switching matrix, header identification, etc. In addition, the performance, analysis andexperimental results are given.
文摘We demonstrate the generation of Q-switched pulses from an ytterbium-doped fiber laser（YDFL） using quantum dot（QD） CdSe as a passive saturable absorber（SA）. The CdSe QD is fabricated by the synthesis of CdO,Se, and manganese acetate and paraffin oil and oleic acid as the solvent and surfactant, respectively. The CdSe QD is then doped into poly-methyl-methacrylate（PMMA） via an emulsion polymerization process. A PMMAhosted CdSe QD thin flake with a homogeneous end surface is then formed and placed between two ferrules and assembled in a YDFL cavity to achieve the Q-switching operation with a repetition rate of 24.45 to 40.50 kHz while varying the pump power from 975 to 1196 mW. The pulse width changes from 6.78 to 3.65 μs with a maximum calculated pulse energy at 0.77 μJ at a pump power of 1101 mW. This work may be the first demonstration of CdSe QD-based Q-switching in an all-fiber configuration that should give proportional insight into semiconductor QD materials in photonics applications.
