Variation in photosynthetic photon flux density within a tropical seasonal rain forest of Xishuangbanna, south-western China

The effects of canopy development, solar angle, and weather conditions on temporal variation in photosynthetic photon flux density（PPFD） at three heights within a tropical rain forest canopy in Xishuangbanna, China, were examined. PPFD was measured every second and stored as 10-min averages from 1 December 2002 to 30 November 2003. PPFD variability was examined at three different temporal scales. Specific days in March, September, and December with clear and overcast sky conditions were selected to separate the effects of leaf area index（LAI） and solar angle on diurnal variability. On both clear and overcast days, mean daily average PPFD was significantly different between March and September at all heights, except 10 m on clear days, suggesting that LAI directly influences PPFD. In contrast, the differences in daily average PPFD among three heights between September and December were likely due to variation in solar angle. In addition, daily average PPFD at all locations were significantly lower under overcast than clear sky conditions in March, September and December. Over the year-long study, the mean daily total PPFD at 2! m, 10 m and 4 m was 2.8, 2.7 and 0.7 mol/（m^2·d）, which accounted for 9.7%, 9.4% and 2.4% of the daily PPFD above the canopy, respectively. Significant differences in mean daily total PPFD occurred at the same heights among different seasons, and diurnal, day-to-day and seasonal PPFD varied at different heights within the canopy. The possible effects of light variability on physiological and morphological responses of plants are discussed.

Characteristics of local photonic state density in an infinite two-dimensional photonic crystal

The local density of photonic states （LDPS） of an infinite two-dimensional （2D） photonic crystal （PC） composed of rotated square-pillars in a 2D square lattice is calculated in terms of the plane-wave expansion method in a combination with the point group theory. The calculation results show that the LDPS strongly depends on the spatial positions. The variations of the LDPS as functions of the radial coordinate and frequency exhibit “mountain chain” structures with sharp peaks. The LDPS with large value spans a finite area and falls abruptly down to small value at the position corresponding to the interfaces between two different refractive index materials. The larger/lower LDPS occurs inward the lower/larger dielectric-constant medium. This feature can be well interpreted by the continuity of electricdisplacement vector at the interface. In the frequency range of the pseudo-PBG （photonic band gap）, the LDPS keeps very low value over the whole Wiger-Seitz cell. It indicates that the spontaneous emission in 2D PCs cannot be prohibited completely, but it can be inhibited intensively when the resonate frequency falls into the pseudo-PBG.

The Effect of Photon Flux Density and Lighting Period on Growth,Flowering,Powdery Mildew and Water Relations of Miniature Roses

Miniature roses (Rosa sp.) were grown at 100 and 150 μmol m-2·s-1 photon flux densities (PFD) with 16, 20 and 24 h·day-1 lighting periods (LP) in a greenhouse compartment in midwinter at latitude 59° north. The study included 10 different treatments and six rose cultivars, altogether 900 plants. The 16 and 20 h LP were applied with or without a dark period of 8 and 4 h·day-1, respectively, by timing the LP in relation to daylight that lasted for 7 - 8 h. Number of days until flowering decreased with an increase in PFD and in LP up to 24 day-1 and was unaffected by the timing of the 16 and 20 h·day-1 LP. Number of flowers and plant dry weight increased 20% to 30% by increasing the PFD. Plant dry weight increased by increasing the LP from 16 to 20 h·day-1 (about 25%), but no effect was found with a further increase to 24 h·day-1. Mean growth rate until flowering increased 30% to 40% by increasing the PFD or by increasing the LP from 16 to 20 h day-1, while little effect was found by a further increase to 24 h·day-1. Increasing the photosynthetic active radiation (PAR) by increasing the LP from 16 to 20 h·day-1 increased the growth rate more than increasing the PFD did. Three of the cultivars were tested for water loss after the detachment of some leaves. Leaves that had developed without a dark period showed a considerably higher water loss than the treatments that included a dark period of 4 or 8 h·day-1. The keeping quality at indoor conditions, however, was unaffected by the treatment due to sufficient watering. Powdery mildew developed significantly more on plants grown with a dark period of 8 h as compared with the other treatments. It was concluded that 20 h·day-1 LP including a dark period of 4 h·day-1 and a PFD of at least 150 μmol·m-2·s-1 should be applied to miniature roses during the winter months in order to effectively produce miniature pot roses with a high quality.

Science Letters:The Moore’s Law for photonic integrated circuits

We formulate a “Moore’s law” for photonic integrated circuits (PICs) and their spatial integration density using two methods. One is decomposing the integrated photonics devices of diverse types into equivalent basic elements, which makes a comparison with the generic elements of electronic integrated circuits more meaningful. The other is making a complex compo- nent equivalent to a series of basic elements of the same functionality, which is used to calculate the integration density for func- tional components realized with different structures. The results serve as a benchmark of the evolution of PICs and we can con- clude that the density of integration measured in this way roughly increases by a factor of 2 per year. The prospects for a continued increase of spatial integration density are discussed.

The Effect of Wide-Range Photosynthetic Active Radiations on Photosynthesis,Growth and Flowering of Rosa sp.and Kalanchoe blossfeldiana

Miniature roses (Rosa sp.) and Kalanchoe blossfeldiana were grown at photon flux densities (PFD) ranging from 60 to 670 μmol·m-2·s-1 (associated with a temperature gradient from 20.0°C to 24.0°C [TEMP1]) and from 50 to 370μmol·m-2-s-1 (associated with a temperature gradient from 22.5°C to 26.5°C [TEMP2]). The experiment was conducted in a greenhouse compartment at latitude 59° north in mid-winter. The daily photosynthetic active radiations (PAR) ranged from 4.3 to 48.2 and 3.6 to 26.6 mol·m-2·day-1 in the TEMP1 and TEMP2 treatments, respectively. Time until flowering in miniature roses decreased from about 50 to 35 days in the TEMP1 treatment and from 50 to 25 days in the TEMP2 treatment, when the PFD increased from 50 to 370μmol·m-2·s-1. In Kalanchoe time until flowering was decreased to the same extent (about 15 days) in both temperature treatments when PFD increased from 50 to 370 μmol·m-2·s-1. The number of flowers and the plant dry weight in miniature roses increased up to 300 – 400 μmol·m-2·s-1 PFD (21.6 - 28.8 mol·m-2 day-1 PAR), while flower stem fresh weight and plant dry weight in Kalanchoe increased up to 200 – 300 μmol·m-2·s-1 at TEMP1. Measurements of the diurnal carbon dioxide exchange rates (CER) in daylight in small plant stands of roses in summertime showed that CER was saturated at about 300 μmol·m-2·s-1 PFD at 370 μmol·mol-1 CO2 and at 400 – 500 μmol·m-2·s-1 PFD at 800 μmol·mol-1 CO2. For Kalanchoe similar results were obtained. Increasing the CO2 concentration from 370 to 800 μmol·mol-1 increased the CER in roses (48%) as well in Kalanchoe (69%). It was concluded that 15 to 20 mol·m-2·day-1 combined with about 24°C air temperature and high CO2 concentration will give a very good growth with lot of flowers within a short production time in miniature roses. For Kalanchoe 10 to 15 mol·m-2·day-1 combined with about 20°C and high CO2 produced a similar result.

Three-dimensional light structure of an upland Quercus stand post-tornado disturbance

Light is the most common limiting factor in forest plant communities,influencing species composition,stand structure,and stand productivity in closed canopy stands.Stand vertical light structure is relatively simple under a closed canopy because most light is captured by overstory trees.However,wind disturbance events create canopy openings from local to landscape scales that increase understory light intensity and vertical light structural complexity.We studied the effects of an EF-1 tornado on horizontal and vertical(i.e.three-dimensional)light structure within a Quercus stand to determine how light structure changed with increasing disturbance severity.We used a two-tiered method to collect photosynthetic photon flux density at 4.67 m and 1.37 m above the forest floor to construct three-dimensional light structure across a canopy disturbance severity gradient to see if light intensity varied with increasing tornado damage.Results indicate that increased canopy disturbance closer to the tornado track increased light penetration and light structure heterogeneity at lower forest strata.Increased light intensity correlated with increased sapling density that was more randomly distributed across the plot and had shifted light capture higher in the stand structure.Light penetration through the overstory was most strongly correlated with decreased stem density in the two most important tree species(based on relative dominance and relative density)in the stand,Quercus alba L.(r=-0.31)and Ostrya virginiana(Mill.)K.Koch(r=-0.27,p<.01),and indicated that understory light penetration was most affected by these two species.As managers are increasingly interested in patterning silvicultural entries on natural disturbances,they must understand residual stand and light structures that occur after natural disturbance events.By providing spatial light data that quantifies light structure post-disturbance,managers can use these results to improve planning required for long-term management.The study also provides comparisons with anthropogenic disturbances to the midstory that may offer useful comparisons to natural analogs for future silvicultural consideration.

Group planting of cherry (Prunus avium L.) fosters growth and tree quality is superior to conventional row planting in Germany

Wild cherry trees produce high-quality timber and provide multiple ecosystem services. However, planting and tending cherry stands in conventional rows are too costly. Therefore, low density group planting was trialled as an alternative to row planting. The mortality, growth, and quality of planted cherry trees were compared between the group and row planting. The influence of neighbourhood competition and light availability on growth and quality was studied. The group and row planting of cherry trees were established at a wind-thrown site in southwestern Germany in the year 2000. In group planting, five cherry seedlings and seven lime seedlings （Tilia cordata Mill.） were planted with a 1 x 1 m spacing. In total, 60 groups were planted per hectare with a 13 × 13 m spacing. In contrast, 3300 seedlings （2475 cherries and 825 limes） were planted per hectare in row planting with a 3 × 1 m spacing. Ten groups and plots （10 × 10 m） were randomly established in group and row planting stand, respectively. The survival rate, stability （height to diameter ratio）, diameter, and height growth were significantly higher in group planting. In the group plantings,40.5% of cherry trees had straight stems and 13.5% had a monopodial crown compared with 15% with straight stems and 2% with a monopodial crown in row planting. The proportion of dominant cherry trees in canopy was 49% in groups compared with 22% in rows. The length of branch free bole was significantly higher in cherries planted in groups than those grown in rows. Intra- and interspecific competition reduced the growth and stability of cherry trees in row planting, but not in group planting. Light availability did not cause any significant effects on growth and quality between group and row planting. This first study on cherry group planting indicates that the survival rate, growth, and tree quality were higher in groups than in rows at this early development stage. The competition by naturally born seedlings was an important reason for the difference in performance between group and row planting. This study will encourage forest practitioners to establish more cherry group planting trials on multiple sites to test the effectiveness of this alternative technique as a tool of regeneration and restoration silviculture.

Analytical model of a superluminescent diode

Using a set of traveling wave rate equations,a superluminescent diode with a low facet reflectivity is studied. Analytical expressions of the distributions of carrier density,forward- and backward-propagating photon densities,and gain are obtained at different facet reflectivities.It is shown that the high nonuniform carrier distribution is evident in the case of low facet reflectivity.The results can serve as useful guides in understanding emission mechanism of superluminescent diodes.

The Effect of Photosynthetic Active Radiation and Temperature on Growth and Flowering of Ten Flowering Pot Plant Species

Hibiscus rosa-sinensis, Rosa sp. (miniature roses), Sinningia speciosa, Gerbera hybrida, Kalanchoe blossfeldiana, Hydrangea, Begonia x hiemalis, Calceolaria, Cyclamen persicum and Pelargonium domesticum were grown at six photon flux densities (85, 130, 170, 215, 255 and 300 μmol·m-2·s-1, PFD) during lighting periods of 20 h·day-1 at three air temperatures (18°C, 21°C and 24°C) in midwinter at latitude 59° north. This corresponded to photosynthetic active radiations (PAR) ranging from 6.1 to 21.6 mol·m-2·day-1. Time until flowering decreased in all species except Cyclamen when the temperature increased from 18°C to 21°C, particularly at lower PFD levels. A further increase in temperature, from 21°C to 24°C, clearly decreased time until flowering in six of the ten tested species. Generally, this represented a reduction in the time until flowering between 20% and 40%. The dry weight of the plants at time of flowering increased up to 170 μmol·m-2·s-1 PFD (12.2 mol·m-2·day-1 PAR) in Hibiscus, miniature rose, Kalanchoe and Pelargonium, while the dry weight reached a maximum at 85 to 130 μmol·m-2·s-1 PFD mol·m-2·day-1 (6.1 to 9.4 mol·m-2·day-1)in the other species. Based on the present results a PAR level of 6 to 8 mol m-2·day-1 is recommended for Calceolaria and Cyclamen, of 8 to 10 mol·m-2·day-1 for Sinningia, Gerbera, Kalanchoe, Hydrangea and Begonia, of 10 to 12 mol·m-2·day-1 for Pelargonium and of 12 to 15 mol·m-2 day-1 for Hibiscus and miniature roses.

The Effect of Low Night and High Day Temperatures on Photosynthesis in Tomato

If low night temperatures can be combined with high day temperatures, providing optimal growth conditions for plants, a significant energy saving can be achieved in greenhouses. Lowering the night temperature from 18°C to 10°C-11°C for 8 h had no negative effect on the CO2 exchange rate (CER) during the following light period in tomato. This was found both in plants grown in artificial light only or in combination with daylight. Allowing the temperature to increase from 20°C to about 40°C, in parallel with an increasing solar photon flux density (PFD) from 0 up to about 800 μmol·m-2·s-1 in the greenhouse during summer, progressively increased CER when the CO2 concentration was maintained at 900 μmol·mol-1. At 400 μmol·mol-1 CO2, maximum CER was reached at about 600 μmol·m-2·s-1 PFD combined with a temperature of 32°C, and leveled out with a further increase in PFD and temperature. Maximum CER at high CO2 concentration was around 100% higher than at low CO2 level. Under early autumn conditions, CER increased up to about 500 μmol·m-2·s-1 PFD/32°C at low CO2 and up to about 600 μmol·m-2·s-1 PFD/35°C at high CO2. An elevated CO2 level doubled the CER in this experiment as well. Measurements of chlorophyll fluorescence showed no effect of low night temperature, high day temperature or CO2 concentration on the quantum yield of photosynthesis, indicating that no treatment negatively affected the efficiency of the photosynthetic apparatus. The results showed that low night temperatures may be combined with very high day temperatures without any loss of daily photosynthesis particularly in a CO2 enriched atmosphere. If this can be combined with normal plant development and no negative effects on the yield, significant energy savings can be achieved in greenhouses.

Evaluation and Enhanced Use of Light Emitting Diodes for Hydroponics

Hydroponic farming is a viable and economical farming method,which can produce safe and healthy greens and vegetables conveniently and at a relatively low cost.It is essential to provide supplemental lighting for crops grown in greenhouses to meet the daily light requirement,Daily Light Integral(DLI).The present paper investigates how effectively and efficiently LEDs can be used as a light source in hydroponics.It is important for a hydroponic grower to assess the requirement of photo synthetically active radiation(PAR)or the Photosynthetic Photon Flux Density(PPFD),in a greenhouse,and adjust the quality and quantity of supplemental lighting accordingly.A Quantum sensor(or PAR sensor)can measure PAR more accurately than a digital light meter,which measures the light intensity or illuminance in the SI unit Lux,but a PAR sensor is relatively expensive and normally not affordable by an ordinary farmer.Therefore,based on the present investigation and experimental results,a very simple way to convert light intensity measured with a Lux meter into PAR is proposed,using a simple conversion factor(41.75 according to the present work).This allows a small-scale hydroponic farmer to use a simple and inexpensive technique to assess the day to day DLI values of PAR in a greenhouse accurately using just an inexpensive light meter.The present paper also proposes a more efficient way of using LED light panels in a hydroponic system.By moving the LED light panels closer to the crop,LED light source can use a fewer number of LEDs to produce the same required daily light requirement and can increase the efficiency of the power usage to more than 80%.Specifically,the present work has determined that it is important to design more efficient vertically movable LED light panels with capabilities of switching individual LEDs on and off,for the use in greenhouses.This allows a user to control the number of LEDs that can be lit at a particular time,as required.By doing so it is possible to increase the efficiency of a LED lighting system by reducing its cost of the electricity usage.

Sunlight multiband photon flux density detection based on PFD calculation model

The sunlight provides essential light and temperature for photosynthesis in protected cultivation.Sunlight is one of the important plant living environment factors in facility agriculture.Most of the existing light detecting equipment are used to detect the whole band of Photosynthetic Available Radiatio(PAR),which is unable to meet the demand of modern photosynthesis research.In order to solve the problem,a function model between single-band spectral Photon Flux Density(PFD)and solar altitude was established through experiments.Based on the model,a sunlight multiband PFD detecting device was designed,which was using a PAR sensor as the detecting node and microcontroller as the core part.This device can detect the PFD of different bands in PAR by using a single sensor.Meanwhile,detecting band can be set by using keyboard according to the characteristic of spectrum absorption of different plants.The secure digital memory card(SD card)was used in the device to store data.Results of the field test showed that determination coefficients of the device testing red and blue PFD with standard value were 0.986 and 0.993 respectively.The device with little relative error and high reliability could be applied in facility light detecting.

Effects of environment lighting on the growth,photosynthesis,and quality of hydroponic lettuce in a plant factory

Leafy vegetable production under controlled environment using artificial lighting has many advantages over conventional greenhouses and open-field production.However,high initial investment and operation costs are restricting the wide application of this technology.In order to design an optimal artificial lighting environment for lettuce production,effects of different combinations of light intensity,photoperiod,and light quality on growth,quality,photosynthesis,and energy use efficiency of lettuce(Lactuca sativa L.cv Ziwei)were investigated under a closed plant factory.Lettuce transplants were grown under photosynthetic photon flux density(PPFD)at 150μmol/m^(2)·s,200μmol/m^(2)·s,250μmol/m^(2)·s,and 300μmol/m^(2)·s provided by fluorescent lamps(FL)with a red to blue ratio(R:B ratio)of 1.8 and light-emitting diode(LED)lamps with R:B ratio of 1.2 and 2.2,in combination with photoperiod of 12 and 16 h/d.In order to examine the“long term”photosynthetic characteristics,net photosynthetic rates of hydroponic lettuce leaves were continuously measured for 2 d(15^(th) and 16^(th) day after transplanting)before harvest.There was no difference in leaf fresh weight(FW)between PPFD of 250μmol/m^(2)·s and 300μmol/m^(2)·s with photoperiod of 16 h/d,regardless of light quality,and same results showed in contents of nitrate,soluble sugar,and vitamin C,respectively.The results of continuous measurements of net photosynthetic rate of lettuce leaves before harvest indicated that plants grown at PPFD of 250μmol/m^(2)·s had consistently higher compared to those grown at PPFD of 300μmol/m^(2)·s.Combining the results from growth,photosynthesis,quality,and energy consumption,it can be concluded that PPFD at 250μmol/m^(2)·s with photoperiod of 16 h/d under LED with R:B ratio of 2.2 is a suitable light environment for maximum growth and high quality of commercial lettuce(cv.Ziwei)production under indoor controlled environment.