Revealing the Multifunctional Electrocatalysis of Indium-Modulated Phthalocyanine for High-Performance Lithium-Sulfur Batteries

The sluggish kinetics of complicated multiphase conversions and the severe shuttling effect of lithium polysulfides(LiPSs)significantly hinder the applications of Li-S battery,which is one of the most promising candidates for the next-generation energy storage system.Herein,a bifunctional electrocatalyst,indium phthalocyanine self-assembled with carbon nanotubes(InPc@CNT)composite material,is proposed to promote the conversion kinetics of both reduction and oxidation processes,demonstrating a bidirectional catalytic effect on both nucleation and dissolution of Li_(2)S species.The theoretical calculation shows that the unique electronic configuration of InPc@CNT is conducive to trapping soluble polysulfides in the reduction process,as well as the modulation of electron transfer dynamics also endows the dissolution of Li_(2)S in the oxidation reaction,which will accelerate the effectiveness of catalytic conversion and facilitate sulfur utilization.Moreover,the InPc@CNT modified separator displays lower overpotential for polysulfide transformation,alleviating polarization of electrode during cycling.The integrated spectroscopy analysis,HRTEM,and electrochemical study reveal that the InPc@CNT acts as an efficient multifunctional catalytic center to satisfy the requirements of accelerating charging and discharging processes.Therefore,the Li-S battery with InPc@CNT-modified separator obtains a discharge-specific capacity of 1415 mAh g^(-1)at a high rate of 0.5 C.Additionally,the 2 Ah Li-S pouch cells deliver 315 Wh kg^(-1)and achieved 80%capacity retention after 50 cycles at 0.1 C with a high sulfur loading of 10 mg cm^(-2).Our study provides a practical method to introduce bifunctional electrocatalysts for boosting the electrochemical properties of Li-S batteries.

Indirect Electroanalysis of 3-Methyl-4-Nitrophenol in Water Using Carbon Fiber Microelectrode Modified with Nickel Tetrasulfonated Phthalocyanine Complex

Electrochemical detection of 3-methyl-4-nitrophenol (MNP) in direct phenol oxidation occurs at high potentials and generally leads to progressive passivation of the electrochemical sensor. This study describes the use of a carbon fiber microelectrode modified with a tetrasulfonated nickel phthalocyanine complex for the detection of MNP at a lower potential than that of direct phenol oxidation. The MNP voltammogram showed the presence of an anodic peak at -0.11 V vs SCE, corresponding to the oxidation of the hydroxylamine group generated after the reduction of the nitro group. The effect of buffer pH on the peak current and SWV parameters such as frequency, scan increment, and pulse amplitude were studied and optimized to have better electrochemical response of the proposed sensor. With these optimal parameters, the calibration curve shows that the peak current varied linearly as a function of MNP concentration, leading to a limit of detection (LoD) of 1.1 μg/L. These results show an appreciable sensitivity of the sensor for detecting the MNP at relatively low potentials, making it possible to avoid passivation phenomena.

Peripheral octamethyl-substituted nickel(Ⅱ)-phthalocyanine-decorated carbon-nanotube electrodes for high-performance all-solid-state flexible symmetric supercapacitors

Construction of advanced electrode materials with unique performance for supercapacitors(SCs)is essential to achieving high implementation in the commercial market.Here,we report a novel peripheral octamethyl-substituted nickel(Ⅱ)phthalocyanine(Ni Me_(2)Pc)-based nanocomposite as the electrode material of all-solid-state SCs.The highly redox-active NiMe_(2)Pc/carboxylated carbon nanotube(CNTCOOH)dendritic nanocomposite provides rapid electron/electrolyte ion-transport pathways and exhibits excellent structural stability,resulting in high-capacity activity and impressive cycling stability.The composite prepared with the optimized weight ratio of Ni Me_(2)Pc:CNT-COOH(6:10)showed the highest specific capacitance of 330.5 F g^(-1)at 0.25 A g^(-1).The constructed NiMe_(2)Pc/CNT-COOH-based all-solid-state symmetric SC device showed excellent performance with a maximum energy density of 22.8 Wh kg^(-1)and outstanding cycling stability(111.6%retained after 35,000 cycles).Moreover,flexible carbon cloth significantly enhanced the energy density of the NiMe_(2)Pc/CNT-COOH all-solid-state symmetric device to 52.1 Wh kg^(-1)with 95.4%capacitance retention after 35,000 cycles,and it could be applied to highperformance flexible electronics applications.These findings provide a novel strategy to design phthalocyanine-based electrode materials for next-generation flexible SC devices.

Conjugated polymerized bimetallic phthalocyanine based electrocatalyst with Fe-N_(4)/Co-N_(4) dual-sites synergistic effect for zinc-air battery

The bifunctional oxygen catalyst is essential for zinc-air batteries(ZABs).Here,an efficient bifunctional oxygen catalyst,PPcFeCo/3D-G,is obtained throughπ-πinteraction between the conjugated polymerized iron-cobalt phthalocyanine(PPcFeCo)with excellent thermal stability and three-dimensional graphene(3D-G).The bimetallic synergistic effect of PPcFeCo,verified by DFT(Density functional theory)calculation,andπ-πinteractions enhances the catalytic activity and durability of the PPcFeCo/3D-G.Regarding electrochemical performance,the PPcFeCo/3D-G with a high electron transfer number(3.98,@0.768 V vs.RHE)has excellent half-wave potential(E_(1/2)=0.890 V vs.RHE)and exhibits outstanding reversibility(ΔE=0.700 V,ΔE=Ej=10-E_(1/2)).The liquid ZAB(LZAB)employed PPcFeCo/3D-G displays a high power density(222 m W cm^(-2)),a specific capacity(792 m A h g-1),and excellent durability(120 h).This work has guiding significance for the preparation of high-efficiency bifunctional catalysts.

Sodium-Coordinated Polymeric Phthalocyanines as Stable High-Capacity Organic Anodes for Sodium-Ion Batteries

Sodium-ion batteries(SIBs)have attracted considerable interest as an alternative to lithium-ion batteries owing to their similar electrochemical performance and superior long-term cycle stability.Organic materials are regarded as promising anode materials for constructing SIBs with high capacity and good retention.However,utilization of organic materials is rather limited by their low energy density and poor stability at high current densities.To overcome these limitations,we utilized a novel polymeric disodium phthalocyanines(pNaPc)as SIB anodes to provide stable coordination sites for Na ions as well as to enhance the stability at high current density.By varying the linker type during a one-pot cyclization and polymerization process,two pNaPc anodes with O-(O-pNaPc)and S-linkers(S-pNaPc)were prepared,and their structural and electrochemical properties were investigated.The O-pNaPc binds Na ions with a lower binding energy compared with S-pNaPc,which leads to more facile Na-ion coordination/dissociation when engaged as SIB anode.The use of O-pNaPc significantly improves the redox kinetics and cycle stability and allows the fabrication of a full cell against Na_(3)V_(2)(PO_(4))_(2)F_(3)/C cathode,which demonstrates its practical application with high energy density(288 Wh kg^(-1))and high power density(149 W kg^(-1)).

Cobalt phthalocyanine-based conjugated polymer as efficient and exclusive electrocatalyst for CO_(2) reduction to ethanol

Electrocatalytic conversion of carbon dioxide to high value-added chemicals is a promising method for solving the energy crisis and global warming.Electrochemical active metal-containing conjugated polymers have been widely studied for heterogeneous carbon dioxide reduction.In the present contribution,we designed and synthesized a stable cobalt phthalocyanine-based conjugated polymer,named CoPPc-TFPPy-CP,and also explored its electro-catalytic application in carbon dioxide reduction to liquid products in an aqueous solution.In the catalyst,cobalt phthalocyanine acts as building blocks connected with 1,3,6,8-tetrakis(4-formyl phenyl)pyrenes via imine-linkages,leading to mesoporous formation polymers with the pore size centered at 4.1nm.And the central co-balt atoms shifted to a higher oxidation state after condensation.With these chemical and structural natures,the catalyst displayed a remarkable electrocatalytic CO_(2) reduction performance with an ethanol Faradaic efficiency of 43.25%at-1.0V vs RHE.While at the same time,the electrochemical reduction process catalyzed by cobalt phthalocyanine produced only carbon monoxide and hydrogen.To the best of our knowledge,CoPPc-TFPPy-CP is the first example among organic polymers and metal-organic frameworks that produces ethanol from CO_(2) with a remarkable selectivity.

Structure of Cu-Phthalocyanine Vacuum Deposited on Inclined Glass Substrates

Cu-phthalocyanine is widely studied as a hole-transport layer in organic electronic devices. Since Cu-phthalocyanine is a molecular solid, the crystal structure depends on a circumstance to a great extent. Vacuum deposited layers were known to consist of two consecutive layers. In this article, Cu-phthalocyanine was deposited on the glass substrate inclined at several angles. The thickness of the first layer was found to be dependent on the substrate angle.

Iron(Ⅲ) phthalocyanine chloride-catalyzed oxidation–aromatization of α,β-unsaturated ketones with hydrazine hydrate: Synthesis of 3,5-disubstituted 1H-pyrazoles

We have developed an iron（III） phthalocyanine chloride‐catalyzed oxidation–aromatization ofα,β‐unsaturated ketones with hydrazine hydrate. Various 3,5‐disubstituted 1H‐pyrazoles were obtained in good to excellent yields. This method offers several advantages, including room‐tem‐perature conditions, short reaction time, high yields, simple work‐up procedure, and use of air as an oxidant. The catalyst can be recovered and reused five times without loss of activity.

Influence of dye molecular structure on electron transfer in 2,9,16,23-tetracarboxy zinc phthalocyanine sensitized solar cell

2, 9, 16, 23-tetracarboxy zinc phthalocyanine （ZnTCPc） is synthesized and characterized by physicochemical and theoretical methods and it is used as a photosensitizer in dye-sensitized solar cells （DSSC）. The excited lifetime, band gap and frontier orbital distribution of ZnTCPc are investigated by fluorescence spectra, cyclic voltammetry and quantum calculation. The results show that the excited lifetime and band gap are 0. 1 ns and 1.81 eV, respectively. Moreover, it is found that the highest occupied molecular orbital （HOMO） location is not shared by both the zinc metal and the isoindoline ligands, and the lowest unoccupied molecular orbital（LUMO） location does not strengthen the interaction coupling between ZnTCPc and TiO：. As a result, the ZnTCPc-DSSC gains a short-circuit current density of 0. 147 mA/cm2, an open-circuit photovoltage of 277 mV, a fill factor of 0. 51 and an overall conversion efficiency of 0. 021%.

A New Binuclear Bisphthaloeyanine: Tetrahydroxo(hexa-tetradecanobisphthalocyaninato) Disilicium

A new binuclear bisphthalocyanine-tetrahydroxo(hexa-tetradecanobisphthalocyani-nato) disilicum is synthesized and characterized. and one of its important applications isintroduced.

Structure of Ethanol Coordinated 1,8,15,22-Tetra-(2',2',4'-trimethyl-3'-pentoxy)phthalocyaninatocobalt

Crystal structure of ethanol coordinated 1,8,15,22-tetra(2,2,4-trimethyl-3-pentoxy) phthalocyaninatocobalt (C64H80N8O4Co2C2H5OH, Mr = 1176.43) was determined by X-ray diffrac- tion methods. The crystal is of monoclinic, space group P21/c with a = 16.4294(4), b = 8.0560(2), c = 24.3654(7) ? ?= 98.3680(8)? Z = 2, V = 3190.6(1) ?, Dc = 1.225 g/cm3, F(000) = 1262, (MoK? = 0.326 mm-1, the final R = 0.0865 and wR = 0.2737 for 4787 observed reflections with I ≥ 2(I). The bulky branched alkyloxy substituents lead to a one structural isomer and space the phthalocyanine molecules where two ethanol molecules coordinate to the cobalt atom from two sides of each molecule.

Optical and Electrochemical Properties of Non-Peripheral Thioaryl-Substituted Subphthalocyanine as Precursors for Dye-Sensitizer to Develop Photovoltaic Cells

Phthalocyanines-related compounds, subphthalocyanines, are the homologues consisting of three isoindole units with boron as the center. The absorption maximum of subphthalocyanines, called the Q band, appears around 560 - 630 nm, which is shifted by approximately 100 nm to shorter wavelengths compared to phthalocyanines. Subphthalocyanines are used as precursors to prepare unsymmetric phthalocyanines for ring enlargement reaction. In this decade, phthalocyanines are used for dye-sensitized solar cells (DSSCs), which require strong absorption of far-red light between 700 and 850 nm because of their highly efficiency. Non-peripheral thioaryl-substituted phthalocyanines have been synthesized. They show near-infrared absorption around 780 - 870 nm and have excellent electron transfer properties. However, their lack of affinity to basal plats inhibits their use as DSSC photosensitizer. Therefore, to synthesize unsymmetrical non-peripheral thioaryl-substituted phthalocyanines possessing good affinity to basal plates, the authors prepared subphthalocyanines having thioaryl substituents as precursors. Spectroscopic properties and electron transfer abilities to synthesize non-peripheral thioaryl-substituted subphthalocyanines were estimated using cyclic voltammetry. The Q band of non-peripheral thioaryl-substituted subphthalocyanines shows around 650 nm shifted to longer wavelength by 86 nm in comparison to subphthalocyanine. The compounds show many reduction potentials. They are acceptable electrons in the subphthalocyanine ring, meaning that the compounds have good electron transfer properties.

Synthesis and Characterization of Novel Mesogenic octa-Substituted Phthalocyanines

Synthesis and separation of asymmetrically octa-substituted phthalocyanines （Pcs） derivatives obtained by cyclotetramerization of two different phthalonitriles （Pns） precursors is described. The phthalonitriles were designed to have different polarity to enable successful chromatographic isolation. The side-chains was designed to lie perpendicular to the plane of the macrocycle via ketal link. It was hoped that the obtained materials would exhibit enhanced solubility and less columnar aggregation both in solution and in the solid state. The preparation of the ketal compounds （2,2-didodecyl- 1,3-benzodioxoles ） with was performed according to Cole method in which catechol and the didodecyl ketone were refluxed in toluene solution in the presence of a catalytic amount of p-toluene sulphonic acid （PTSA）. The resultant water was removed by azeotropic distillation using a Dean-Stark trap. 2,2-didodecyl-l,3-benzodioxoles was brominated then cyanated as described in literature to give the desired phthalonitrile. The other phthalonitrile （4,5-bis（1＇,4＇,7＇,10＇-tetraoxaundecyl） phthalonitrile was obtained also as described in literature. The structures of the obtained isomers were confirmed by spectroscopic methods. Optical microscopy and differential scanning calorimetry （DSC） measurements revealed that two of the obtained derivatives display hexagonal and rectangular columnar liquid crystalline phases （Dhd＆Drd） over a wide temperature range.

Study on the Synthesis and in vitro Photodynamic Anti-cancer Activity of Tetra(trifluoroethoxy) Germanium Phthalocyanine

The synthesis and in vitro photodynamic anticancer activity of a new photosen- sitizer, tetra（trifluoroethoxy） germanium phthalocyanine （GePcF）, were studied. GePcF was characterized by UV-Vis, IR, MS and elemental analysis. The in vitro photodynamic activity of GePcF was studied by MTT. IC50 of GePcF for SW480 cells of human colonic adenocarcinoma and HeLa cells of cervical cancer were 36.53 and 45.78 μmol/L, respectively. GePcF as a photosensitizer may be used to treat cancers due to its photodyrmmic anticancer activity.

Calculation of Visible Absorption Maxima of Phthalocyanine Compounds by Quantum Theory

Based on HYPERCHEM, the structures of five phthalocyanie compounds were optimized with PM3 and their visible absorption maxima were calculated with ZINDO/S method by selecting appropriate p-p overlap weighting factor (OWFp-p), the agreement with experiment was excellent. The relationship between OWF- and molecular structure parameters was obtained by the method of stepwise regression and was explained in terms of quantum theory. OWF-=0.58126+0.04562ANC1+0.03839X. Where, ANC1 and X are the symbols of average net charges on coordinated bonded nitrogens and electronegativity of central atom, respectively.

Operando HERFD-XANES and surface sensitive Δμ analyses identify the structural evolution of copper(Ⅱ) phthalocyanine for electroreduction of CO_(2)

The quantitative understanding of how atomic-level catalyst structural changes affect the reactivity of the electrochemical CO_(2)reduction reaction is challenging.Due to the complexity of catalytic systems,conventional in situ X-ray spectroscopy plays a limited role in tracing the underlying dynamic structural changes in catalysts active sites.Herein,operando high-energy resolution fluorescence-detected X-ray absorption spectroscopy was used to precisely identify the dynamic structural transformation of well-defined active sites of a representative model copper(Ⅱ)phthalocyanine catalyst which is of guiding significance in studying single-atom catalysis system.Comprehensive X-ray spectroscopy analyses,including surface sensitive△μspectra which isolates the surface changes by subtracting the disturb of bulk base and X-ray absorption near-edge structure spectroscopy simulation,were used to discover that Cu species aggregated with increasing applied potential,which is responsible for the observed evolution of C_(2)H_(4).The approach developed in this work,characterizing the active-site geometry and dynamic structural change,is a novel and powerful technique to elucidate complex catalytic mechanisms and is expected to con tribute to the rational design of highly effective catalysts.

Synthesis and Crystal Structure of a Mixed (Phthalocyaninato)(porphyrinato) Yttrium Double-decker Complex

The title compound,a mixed（phthalocyaninato）（porphyrinato） yttrium double-decker complex 1,has been synthesized and structurally characterized by X-ray single-crystal diffraction method.Crystal data：monoclinic,space group C2/c,Z = 8,C79H52Cl10N12O4Y,Mr = 1676.74,a = 38.217（3）,b = 18.9867（13）,c = 26.200（3） ,β = 128.0190（10）°,V = 14977（2） 3,Dc = 1.487 g/cm3,μ（MoKα） = 1.196 mm-1,F（000） = 6808,R = 0.0745 and wR = 0.2208 for observed reflections with I 〉2σ（I）.X-ray analysis reveals that the coordination polyhedron adopts a slightly distorted square-antiprismatic structure around the metal center.Both phthalocyanine and porphyrin ligands are saucer-shaped,with the skew angle of the two ligand planes approximately 45°.

Cobalt phthalocyanine-graphene complex for electro-catalytic oxidation of dopamine

Cobalt phthalocyanine-graphene （CoPc-Gr） complex are fabricated through 7r-Tr interaction of each components, with CoPc adsorbed/inserted on/in the graphene sheets. The obtained complex could be used in the electro-chemical detection of various medicines. CoPc-Gr modified glassy electrode shows excellent response to the electro-oxidation of dopamine （DA） and ascorbic acid （AA）, much better than those of CoPc, graphene oxide （GrO） or graphene （Gr） modified electrode. Significantly, the detection of dopamine is a diffusion-controlled process, highly selective, and has a low detection limit and broad linear range.

Zinc phthalocyanine as an efficient catalyst for halogen-free synthesis of formamides from amines via carbon dioxide hydrosilylation under mild conditions

The combination of a zinc phthalocyanine(ZnPc)catalyst and a stoichiometric amount of dimethyl formamide(DMF)provided a simple route to formamide derivatives from amines,CO2,and hydrosilanes under mild conditions.We deduced that formation of an active zinc‐hydrogen(Zn‐H)species promoted hydride transfer from the hydrosilane to CO2.The cooperative activation of the Lewis acidic ZnPc by strongly polar DMF,led to formation of activated amines and hydrosilanes,which promoted the chemical reduction of CO2.Consequently,the binary ZnPc/DMF catalytic system showed excellent yields and superior chemoselectivity,representing a simple and sustainable pathway for the reductive transformation of CO2into valuable chemicals as an alternative to conventional halogen‐containing process.

A bipolar metal phthalocyanine complex for sodium dual-ion battery

Dual-ion batteries(DIBs) have attracted immense interest as a new generation of energy storage device due to their low cost,environmental friendliness and high working voltage.However,developing DIBs using organic compounds as active electrode materials is in its infancy.Herein,we first report a bipolar and self-polymerized Cu phthalocyanine(CuTAPc) as an electrode material for sodium-based DIBs(SDIBs).Benefitting from the bipolar property,CuTAPc could serve as the cathode or anode material to construct metal sodium-based or metal sodium-free SDIB(cell 1 or 2) by coupling with sodium anode or graphite cathode,respectively.As a result,cell 1 displays a high discharge capacity of 195.7 mAh g^(-1) at 50 mA g^(-1) and a high reversible capacity of 57 mAh g^(-1) over 2500 cycles at 1 A g^(-1),and cell 2 shows a high energy density of 324 Wh kg^(-1) and a high power density of 7481 W kg^(-1).Subsequently,the proposed binding mechanism and the bipolar reactivity of CuTAPc have been revealed by the detailed reaction kinetic analysis and ex-situ techniques as well as the density functional theory(DFT) calculations.This work could open a pathway to develop the advanced SDIBs constructed by elemental abundant and environmentally friendly organic materials.