Changchun Institute of Optics and Fine Mechanics and Physics of CAS

Changchun Institute of Optics, Fine Mechanics, and Physics (CIOMP) of CAS was established in Changchun, Jilin Province, on July 5, 1999 on the basis of consolidation of two former CAS institutes: Changchun Institute of Optics and Fine Mechanics, and Changchun Institute of Physics. The institute is an experimental unit of CAS Knowledge Innovation Program (KIP).

Physical and Mechanical Properties of Coral Sand in the Nansha Islands

Coral sand is a unique material developed in the tropical ocean environment, which is mainly composed of coral and other marine organism debris, with the CaCO3 content up to 96 %. It has special physical and mechanical properties due to its composition, structure and sedimentary environment. In this contribution, we discuss its specific gravity, porosity ratio compressibility, crushing, shearing and intensity for coral sand samples from the Nansha islands based on laboratory mechanical tests. Our results show distinct high porosity ratio, high friction angle and low intensity as compared with the quartz sand. We believe that grain crushing is the main factor that influences the deformation and strength of coral sand. Comprehensive study on the physical and mechanical properties of coral sands is significant in providing reliable scientific parameters to construction on coral islet, and thus avoids accidents in construction.

Unstable Tropical Air-Sea Interaction Waves and Their Physical Mechanisms

In this paper, the tropical air-sea interaction is discussed by using a simple air-sea coupled model, in which the inertia-gravity waves are filtered off and only the equatorial Rossby waves are reserved in both the atmosphere and the ocean. There exist two kinds of air-sea interaction waves in the coupled model, that is, the high-frequency fast waves and the low-frequency slow waves. The phase speed of the fast waves is westward and the frequencies are close to those of the equatorial Rossby waves in the atmosphere. The slow waves propagate westward in the part of short wavelengths and eastward in that of long wavelengths. There exist instabilities for both the westward and eastward propagating slow waves. If the fast waves are filtered off, there is little effect on the slow waves which have great influence on the long range process in the tropical air-sea coupled system. According to the tropical air-sea interaction waves we obtain here, a possible explanation to the propagating process of ENSO events is given.

Physical Mechanism of Organic Matter-Mineral Interaction in Longmaxi Shale,Sichuan Basin,China

Objective Shale gas is as an important kind of unconventional natural gas,with a great resource potential,and its exploration and development has attracted much attention around the world.Organic matter（OM）pores are a common constituent in shales and form the dominant pore network of many shale gas systems.

Intelligent direct analysis of physical and mechanical parameters of tunnel surrounding rock based on adaptive immunity algorithm and BP neural network

Because of complexity and non-predictability of the tunnel surrounding rock, the problem with the determination of the physical and mechanical parameters of the surrounding rock has become a main obstacle to theoretical research and numerical analysis in tunnel engineering. During design, it is a frequent practice, therefore, to give recommended values by analog based on experience. It is a key point in current research to make use of the displacement back analytic method to comparatively accurately determine the parameters of the surrounding rock whereas artificial intelligence possesses an exceptionally strong capability of identifying, expressing and coping with such complex non-linear relationships. The parameters can be verified by searching the optimal network structure, using back analysis on measured data to search optimal parameters and performing direct computation of the obtained results. In the current paper, the direct analysis is performed with the biological emulation system and the software of Fast Lagrangian Analysis of Continua (FLAC3D. The high non-linearity, network reasoning and coupling ability of the neural network are employed. The output vector required of the training of the neural network is obtained with the numerical analysis software. And the overall space search is conducted by employing the Adaptive Immunity Algorithm. As a result, we are able to avoid the shortcoming that multiple parameters and optimized parameters are easy to fall into a local extremum. At the same time, the computing speed and efficiency are increased as well. Further, in the paper satisfactory conclusions are arrived at through the intelligent direct-back analysis on the monitored and measured data at the Erdaoya tunneling project. The results show that the physical and mechanical parameters obtained by the intelligent direct-back analysis proposed in the current paper have effectively improved the recommended values in the original prospecting data. This is of practical significance to the appraisal of stability and informationization design of the surrounding rock.

Organo-silane compounds in medium density fiberboard:physical and mechanical properties

We studied the effects of nanoparticles of organo-silane（NOS） compounds in the size range of20–80 nm on physical and mechanical properties in medium density fiberboard,and used NOS at four consumption levels of 0,50,100,and 150 g kg-1dry wood fibers.Density of all treatments was kept constant at 0.67 g cm-3.The water-repellent property of organo-silane significantly reduced water absorption（WA） and thickness swelling but mechanical properties declined due to the reduced proportion of wood-fiber as organo-silane was added to the matrix：the compression ratio of MDF panels and the integrity among wood-fibers both declined,resulting in reduced mechanical properties.We recommend use of 50 g of NOS/kg wood-fiber to improve WA and thickness swelling while retaining acceptable mechanical properties.

Nonvolatile Resistive Switching and Physical Mechanism in LaCrO3 Thin Films

Polycrystalline LaCrO3（LCO） thin films are deposited on Pt/Ti/SiO2/Si substrates by pulsed laser deposition and used as the switching material to construct resistive random access memory devices. The unipolar resistive switching（RS） behavior in the Au/LCO/Pt devices exhibits a high resistance ratio of ~104 between the high resistance state（HRS） and low resistance state（LRS） and exhibits excellent endurance/retention characteristics.The conduction mechanism of the HRS in the high voltage range is dominated by the Schottky emission, while the Ohmic conduction dictates the LRS and the low voltage range of HRS. The RS behavior in the Au/LCO/Pt devices can be understood by the formation and rupture of conducting filaments consisting of oxygen vacancies,which is validated by the temperature dependence of resistance and x-ray photoelectron spectroscopy results.Further analysis shows that the reset current IR and reset power PR in the reset processes exhibit a scaling law with the resistance in LRS（R0）, which indicates that the Joule heating effect plays an essential role in the RS behavior of the Au/LCO/Pt devices.

Predicting uniaxial compressive strength of serpentinites through physical,dynamic and mechanical properties using neural networks

The uniaxial compressive strength(UCS)of intact rock is one of the most important parameters required and determined for rock mechanics studies in engineering projects.The limitations and difficulty of conducting tests on rocks,specifically on thinly bedded,highly fractured,highly porous and weak rocks,as well as the fact that these tests are destructive,expensive and time-consuming,lead to development of soft computing-based techniques.Application of artificial neural networks(ANNs)for predicting UCS has become an attractive alternative for geotechnical engineering scientists.In this study,an ANN was designed with the aim of indirectly predicting UCS through the serpentinization percentage,and physical,dynamic and mechanical characteristics of serpentinites.For this purpose,data obtained in earlier experimental work from central Greece were used.The ANN-based results were compared with the experimental ones and those obtained from previous analysis.The proposed ANN-based formula was found to be very efficient in predicting UCS values and the samples could be classified with simple physical,dynamic and mechanical tests,thus the expensive,difficult,time-consuming and destructive mechanical tests could be avoided.

Influence of cooling speed on the physical and mechanical properties of granite in geothermal-related engineering

In deep-earth engineering,the high earth temperature can significantly affect the rock's mechanical properties,especially when the rock is cooled during the construction process.Accordingly,whether the cooling speed affects the mechanical and physical properties of rocks is worth to be investigated.The present study explored the influence of the cooling rate on the physical and chemical properties of granite heated at 25–800°C.The mechanical and physical properties involved in this study included uniaxial compression strength,peak strain,modulus,P-wave velocity,mass and volume,the change of which could reflect the sensitivity of granite to the cooling rate.Acoustic emission(AE)monitoring,microscopic observation,and X-ray diffraction(XRD)are used to analyze the underlying damage mechanism.It is found that more AE signals and large-scale cracks are accounted for based on the b-value method when the specimens are cooled by water.Furthermore,the microscopic observation by polarized light microscopy indicates that the density,opening degree,and connectivity of the cracks under water cooling mode are higher than that under natural cooling mode.In addition,the XRD illustrates that there is no obvious change in mineral content and diffraction angle at different temperatures,which confirms that the change of mechanical properties is not related to the chemical properties.The present conclusion can provide a perspective to assess the damage caused by different cooling methods to hot rocks.

Effect of carbon nanotube on physical and mechanical properties of natural fiber/glass fiber/cement composites

The objective of this investigation was to introduce a cement-based composite of higher quality. For this purpose new hybrid nanocomposite from bagasse fiber,glass fiber and multi-wall carbon nanotubes（MWCNTs）were manufactured. The physical and mechanical properties of the manufactured composites were measured according to standard methods. The properties of the manufactured hybrid nanocomposites were dramatically better than traditional composites. Also all the reinforced composites with carbon nanotube, glass fiber or bagasse fiber exhibited better properties rather than neat cement.The results indicated that bagasse fiber proved suitable for substitution of glass fiber as a reinforcing agent in the cement composites. The hybrid nanocomposite containing10 % glass fiber, 10 % bagasse fiber and 1.5 % MWCNTs was selected as the best compound.

Numerical Physical Mechanism and Model of Turbulent Cascades in a Barotropic Atmosphere

In a barotropic atmosphere, new Reynolds mean momentum equations including turbulent viscosity, dispersion, and instability are used not only to derive the KdV-Burgers-Kuramoto equation but also to analyze the physical mechanism of the cascades of energy and enstrophy. It shows that it is the effects of dispersion and instability that result in the inverse cascade. Then based on the conservation laws of the energy and enstrophy, a cascade model is put forward and the processes of the cascades are described.

Ferroelectricity of hafnium oxide-based materials:Current status and future prospects from physical mechanisms to device applications

The finding of the robust ferroelectricity in HfO_(2)-based thin films is fantastic from the view point of both the fundamentals and the applications.In this review article,the current research status of the future prospects for the ferroelectric HfO_(2)-based thin films and devices are presented from fundamentals to applications.The related issues are discussed,which include:1)The ferroelectric characteristics observed in HfO_(2)-based films and devices associated with the factors of dopant,strain,interface,thickness,defect,fabrication condition,and more;2)physical understanding on the observed ferroelectric behaviors by the density functional theory(DFT)-based theory calculations;3)the characterizations of microscopic and macroscopic features by transmission electron microscopes-based and electrical properties-based techniques;4)modeling and simulations,5)the performance optimizations,and 6)the applications of some ferroelectric-based devices such as ferroelectric random access memory,ferroelectric-based field effect transistors,and the ferroelectric tunnel junction for the novel information processing systems.

Analysis on the Physical Mechanism of Snowstorm Generated by the South Cyclone

[Objective] The research aimed to study the physical mechanism of snowstorm which was generated by the south cyclone. [Method] By using the routine meteorological observation data, satellite data and MM5 mode output data, the snowstorm weather in the east of Heilongjiang Province during March 4-6, 2007 was analyzed. The physical mechanism of snowstorm which was generated by the south cyclone was discussed. [Result] Jianghuai cyclone advanced northward to generate the snowstorm. In the middle and high latitudes, the good cold air must coordinate with it. Meanwhile, the south cyclone provided the good high temperature condition and the rich water vapor condition for the snowstorm generation. The snowstorm generation must have the close coordination of airflows in the high and low levels, and the strong convergence ascending movement was generated. The vertical movement made that the atmospheric energy could be transformed. When the snowstorm was generated, there was the strong vertical ascending movement in the high altitude. The snowstorm falling zone was in the north side of big value zone. The variation of TBB cloud top temperature intensity as the time had the good guidance role for forecasting the starting time of strong snowfall. The convergence center of water vapor flux divergence and the zone where the temperature drew point difference in 925 hPa layer ≤ 4 ℃ had the good corresponding relationships with the snowstorm falling zone and the snowfall strong center. It provided the good reference index for forecasting the falling zone and strong center of snowstorm. Under the restriction of moist potential vorticity conservation, for the leaning of θe surface, the atmospheric horizontal wind was vertical, or the wet baroclinicity increased, which could cause the significant development of vertical vorticity. The bigger θe surface leaning was, the stronger the cyclonic vorticity was. It was easy to cause the strong precipitation weather. When the high-altitude dry cold air invaded and glided along θe ridge surface, the unstable energy was induced to release, which provided the energy for the snowstorm generation. The dry invasion process was also the strong snowfall generation process, and the snowstorm falling zone was in the steep and dense zone of θe. [Conclusion] The research provided the theory basis for the prediction and forecast of rainstorm weather.

Study on the Structural Characteristics and Physical and Mechanical Properties of Phoebe bournei Thinning Wood

The artificial afforestation of precious Phoebe bournei has been carried out in China.During the cultivation process,thinning wood will be produced.The properties of thinning wood might vary greatly with matured wood and require evaluation for better utilization.The objective of the present study aims to determine the wood structure,fiber morphology,and physical and mechanical properties of the Phoebe bournei thinning wood to help us understand the wood properties and improve its utility value.Three 14-year-old Phoebe bournei were cut from Jindong Forestry Farm of Hunan Province,China.The wood structure and fiber morphology were observed and analyzed with a light microscope and scanning electron microscope.The physical and mechanical properties were tested according to the Chinese national standards.The results showed as follows:(1)The Phoebe bournei thinning wood has a beautiful wood figure and fine texture,whereas the heartwood has not yet formed.(2)It is a diffuse-porous hardwood with small and less pores as well as fine wood rays.(3)The wood fiber is medium length and extremely thin wall thickness.(4)It is low in density and has excellent dimensionally stability.(5)The wood mechanical properties belong to the low to medium class and the comprehensive strength of wood belongs to the medium-strength class.It is concluded that Phoebe bournei thinning wood is suitable for wood carving,handicraft,high-end furniture,and decorative furniture parts.

A preliminary analysis of physical mechanism of transformation process from a landed typhoon into an extratropical cyclone

A diagnostic study is performed in the paper on the process of typhoon Norris (1980) transforming into an ex-tratropical cyclone after its landing over Southeast China. The main findings are as follows:The changes of kinetic energy are mainly attributed to the generation due to non-divergent wind. During the early stage of the typhoon landing, there exits only a small quantity of kinetic energy exchanging with the environment. And after it is transformed into an extratropical cyclone, a large amount of kinetic energy is exported from the system toward the environment.The horizontal and vertical flux-divergence terms of eddy available potenlial energy are the prominent sinks in the budgets of eddy kinetic energy. The generations of eddy kinetic energy due to both the barotropic and baroclinic processes are source terms. The former is remarkable during the initial stage. But after the depression is transformed into an extratropical cyclone, the roles of the generation by the barotropic and baroclinic processes are reversed, 1. e. , the latter has become more significant than the former.Diabatic heating is the most dominant heat source. The terms of vertical heat flux by cumulus and large-scale motion are the major sinks. And the latter is prominent after the system is transformed into an extratropical cycfone.

Comparative Study of the Reactivity of Clay Earth Materials for the Production of Compressed Earth Blocks in Ambient Conditions: Effect on Their Physico-Mechanical Performances

This study assesses the reactivity of four (04) different types of clayey earthen materials (Kamboinsé, Pabré, Saaba, and Kossodo) with Ca(OH)2, analytical lime (AL) versus lime residu (LR), in ambient conditions. The effect of the stabilization of the earth with the LR was also studied on the performances of compressed earth blocks (CEB). The lime content varied from 0% to 20% with respect to the mass of dry earth material. The analysis of the reactivity and physico-mechanical properties were respectively carried out on the solutions of the mixtures (earth + LR and earth + AL) and CEB (earth + LR). The mixtures were cured between 0 and 60 days at the ambient temperature of laboratory (30℃ ± 5℃). The results showed that the reactivity of the clayey earth materials with AL is comparable to that with the LR. At the same time, this reactivity improved the physical and mechanical properties of stabilized CEB depending on the type of earth material, lime content and curing time. The maximum values of the dry compressive strength, observed for each material stabilized with 20% LR, are 6 and 7 MPa (Kamboinsé), 8.8 and 9.3 MPa (Pabré), 6 and 6.5 MPa (Saaba), 8.8 and 9.7 MPa (Kossodo) respectively at curing time of 28 and 45 days. The structural efficiency of CEB was also improved which implies that, in the current conditions, the stabilization of earth materials using LR allows to produce the CEB for potential applications in wall masonry.

Physical and Mechanical Characteristics of Ash Concrete from Palm Nut Shells: Pouzzolanic Effect

The use of agricultural waste in construction is an advantage favorable to environmental sanitation, the preservation of non-renewable resources but also to the execution of an ecological work. The objective of this work is to study the influence of the addition of palm nut cockles ash as an adjuvant on the physico-mechanical properties of concrete. For this study, ordinary concretes and ash concretes were made and subjected to physical and mechanical characterization tests at different maturation periods. The results of the tests carried out indicate that the presence of ash reduces the workability and porosity of the concrete and then increases the density of the concrete to 6.3%. In addition, we found that incorporating the ash improves the mechanical strength of the concrete compared to the control concrete. Thus, the compressive strength of ash concrete is 32.07 MPa and that of splitting is 2.76 MPa at 28 days, which is satisfactory vis-à-vis the threshold of construction projects for ready concrete for use, which recommends a minimum of 25 MPa (compression) and 2.6 MPa (splitting) at 28 days. This improvement in mechanical performance can be attributed to the pozzolanic effect of the constituents of the ash. Therefore, the ash from palm nut shells can be used to improve the mechanical properties of concrete.

Influence of Plastic and Coconut Shell (Cocos nucifera L.) on the Physico-Mechanical Properties of the 8/6 Composite Rafter

In this paper, the authors aim to propose the use of waste plastics as a binder in a coconut shell reinforcement for the development of an 8/6 size composite rafter to replace the natural 8/6 size backbone in construction. Following a study into the choice of the best proportions, a total of 30 size 8/6 composite rafters with different proportions of 20%, 25%, 30%, 35%, 40% and 50% plastic content were developed. All the 8/6 composite rafters were subjected to mechanical (3-point bending strength and Monnin hardness) and physical (bulk density and water absorption) characterization analyses. The results show that flexural strength increases from 27.56 MPa to 33.30 MPa for proportions ranging from 20% to 35% plastic content. Above 35% plastic, the strength drops to 19.60 MPa for a 50% plastic content. Similarly, the Monnin hardness drops from 9 mm to 5 mm when the plastic content varies from 20 to 50%. As for the results of the physical characterisation, the values obtained for apparent density vary from 0.89 to 1 for proportions varying from 20% to 35% plastic content and drop to 0.94 for 50% plastic content. As for water absorption, values drop from 6.82% to 2.45% when the plastic content increases from 20% to 50%. These mechanical strengths stabilise at 35% plastic content. The development of an 8/6 chevron composite material based on plastic and coconut shell could therefore be a way of recovering waste and solving the problem of deforestation.

Research on thermal insulation materials properties under HTHP conditions for deep oil and gas reservoir rock ITP-Coring

Deep oil and gas reservoirs are under high-temperature conditions,but traditional coring methods do not consider temperature-preserved measures and ignore the influence of temperature on rock porosity and permeability,resulting in distorted resource assessments.The development of in situ temperaturepreserved coring(ITP-Coring)technology for deep reservoir rock is urgent,and thermal insulation materials are key.Therefore,hollow glass microsphere/epoxy resin thermal insulation materials(HGM/EP materials)were proposed as thermal insulation materials.The materials properties under coupled hightemperature and high-pressure(HTHP)conditions were tested.The results indicated that high pressures led to HGM destruction and that the materials water absorption significantly increased;additionally,increasing temperature accelerated the process.High temperatures directly caused the thermal conductivity of the materials to increase;additionally,the thermal conduction and convection of water caused by high pressures led to an exponential increase in the thermal conductivity.High temperatures weakened the matrix,and high pressures destroyed the HGM,which resulted in a decrease in the tensile mechanical properties of the materials.The materials entered the high elastic state at 150℃,and the mechanical properties were weakened more obviously,while the pressure led to a significant effect when the water absorption was above 10%.Meanwhile,the tensile strength/strain were 13.62 MPa/1.3%and 6.09 MPa/0.86%at 100℃ and 100 MPa,respectively,which meet the application requirements of the self-designed coring device.Finally,K46-f40 and K46-f50 HGM/EP materials were proven to be suitable for ITP-Coring under coupled conditions below 100℃ and 100 MPa.To further improve the materials properties,the interface layer and EP matrix should be optimized.The results can provide references for the optimization and engineering application of materials and thus technical support for deep oil and gas resource development.

Cement-bonded particleboard with a mixture of wheat straw and poplar wood

We investigated the hydration behavior and some physical/mechanical properties of cement-bonded particleboard （CBPB） containing particles of wheat straw and poplar wood at various usage ratios and bonded with Portland cement mixed with different levels of inorganic additives. We determined the setting time and compression strength of cement pastes containing different additives and particles, and studied the effects of these additives and particles on thickness swelling, internal bond strength and modulus of rupture of CBPB by using RSM （Response Surface Methodology）. The mathematical model equations （second-order response functions） were derived to optimize properties of CBPB by computer simulation programming. Predicted values were in agreement with experimental values （R2 values of 0.93, 0.96 and 0.96 for TS, IB and MOR, respectively）. RSM can be efficiently applied to model panel properties. The variables can affect the properties of panels. The cement composites with bending strength 〉 12.5 MPa and internal bond strength 〉 0.28 MPa can be made by using wheat straw as a reinforcing material. Straw particle usage up to 11.5% in the mixture satisfies the minimum requirements of International Standard, EN 312 （2003） for IB and MOR. The dose of 4.95% calcium chloride, by weight of cement, can improve mechanical properties of the panels at the minimum requirement of EN 312. By increasing straw content from 0 to 30%, TS was reduced by increasing straw particle usage up to 1.5% and with 5.54% calcium chloride in the mixture, TS satisfied the EN 312 standard.