The physical stability of solid-liquid fuel is a factor that needs to be considered for fuel product practicability for storage and transportation. To determine the Influence of liquid bridge force on physical stabili...The physical stability of solid-liquid fuel is a factor that needs to be considered for fuel product practicability for storage and transportation. To determine the Influence of liquid bridge force on physical stability, two detection devices were designed. The laws obtained from microscopic experiments are used to verify the physical stability of fuel under different component ratios. The liquid bridge force is found to increase with the droplet volume. Multiliquid bridges above one critical saturation can generate significant resultant forces compared to single-liquid bridges of the same volume. There exist four states of solid-liquid mixed fuel with increasing liquid saturation rate. The liquid bridge force between the solid and liquid plays a dominant role in the physical stability of the first three states. There may be two stages involved in the stratification process for state 4 fuel, and the liquid viscosity is another factor that cannot be ignored. In the process of selecting a fuel ratio, a larger liquid bridge force between the components can be obtained by properly improving the wetting effect so that the fuel shows better physical stability.展开更多
Oil dispersible suspension concentrates are safe,green,and environmentally friendly formulations.Problems such as layering,pasting,and bottoming are frequently encountered during the production,storage,and transportat...Oil dispersible suspension concentrates are safe,green,and environmentally friendly formulations.Problems such as layering,pasting,and bottoming are frequently encountered during the production,storage,and transportation process.Polyisobutylene succinimide functions as a dispersant and exhibits great potential to improve the physical stability of the oil dispersible suspension concentrate.From a microscopic perspective,the sorption characteristics of the polyisobutylene succinimide dispersant T151 on penoxsulam particle surfaces were comprehensively evaluated with XPS,FTIR,and SEM.The T151 adsorption procedure complied with a pseudo-second-order kinetic adsorption model,and it was a kind of physical sorption with an Ea of 22.57 kJ⋅mol^(−1).The T151 sorption model was consistent with the Langmuir isotherm.The adsorption process was spontaneous and followed by an entropy increase.TheΔH^(θ)of dispersant T151 on the surface of penoxsulam particles was 31.59 kJ⋅mol^(−1).The adsorption procedure was endothermic,and the primary force was hydrogen bonding.The XPS results showed that the F and S electronic peaks at the penoxsulam interface decreased,and that the C electronic peak increased significantly after the adsorption of dispersant T151,indicating the adsorption on the surface of penoxsulam particles.The results of this study provide a vital theoretical basis for the application of polyisobutylene succinimide dispersants in oil dispersible suspension systems.展开更多
<span style="font-family:Verdana;">Epilepsy is a chronic and the fourth most common neurological disorder which affects people of all age groups. Recently research and awareness on epilepsy-related dea...<span style="font-family:Verdana;">Epilepsy is a chronic and the fourth most common neurological disorder which affects people of all age groups. Recently research and awareness on epilepsy-related deaths have rapidly grown over the past two decades. Many previous studies are attributed to the guidelines that apprise health care professionals in handling these deaths, but there is a relative scarcity of information accessible for clinicians and pharmacists who are responsible for manufacturing or preparing the extemporaneous anti-epileptic suspensions in the hospitals. Mostly in partial seizures, phenytoin is one of the first-choice drugs. In Saudi Arabian hospitals, the extemporaneous preparation of phenytoin suspension is common, but the hot climatic weather in Saudi Arabia possesses stability problems that should be tackled as the prepared suspension should pass all the stability tests to ensure uniform dosage of the extemporaneous formulation. In the current study, the commercial capsules were used to prepare the oral phenytoin sodium extemporaneous suspension. The physical, chemical and microbiological stability of phenytoin sodium suspension is analyzed at various temperatures.</span>展开更多
Superdisintegrants are cross-linked polymers that can be used as dispersants for fast release of drug nanoparticles from nanocomposite microparticles during in vitro and in vivo dissolution. Currently avail- able supe...Superdisintegrants are cross-linked polymers that can be used as dispersants for fast release of drug nanoparticles from nanocomposite microparticles during in vitro and in vivo dissolution. Currently avail- able superdisintegrant particles have average sizes of approximately 5-130 μm, which are too big for drug nanocomposite applications. Hence, production of stable superdisintegrant suspensions with less than 5 μm particles is desirable. Here, we explore the preparation of colloidal suspensions of anionic and nonionic superdisintegrants using a wet stirred media mill and assess their physical stability. Sodium starch glycolate (SSG) and crospovidone (CP) were selected as representative anionic and nonionic superdisintegrants, and hydroxypropyl cellulose (HPC) and sodium dodecyl sulfate (SDS) were used as a steric stabilizer and a wetting agent/stabilizer, respectively. Particle sizing, scanning electron microscopy, and zeta potential measurements were used to characterize the suspensions. Colloidal superdisintegrant suspensions were prepared reproducibly. The extensive particle breakage was attributed to the swelling-induced softening in water. SSG suspensions were stable even in the absence of stabilizers, whereas CP suspensions required HPC-SDS for minimizing particle aggregation. These findings were explained by the higher absolute (negative) zeta potential of the suspensions of the anionic superdisintegrant (SSG) as compared with those of the nonionic superdisintegrant (CP).展开更多
基金financial support from National Natural Science Foundation of China (Grant No. 12102197)。
文摘The physical stability of solid-liquid fuel is a factor that needs to be considered for fuel product practicability for storage and transportation. To determine the Influence of liquid bridge force on physical stability, two detection devices were designed. The laws obtained from microscopic experiments are used to verify the physical stability of fuel under different component ratios. The liquid bridge force is found to increase with the droplet volume. Multiliquid bridges above one critical saturation can generate significant resultant forces compared to single-liquid bridges of the same volume. There exist four states of solid-liquid mixed fuel with increasing liquid saturation rate. The liquid bridge force between the solid and liquid plays a dominant role in the physical stability of the first three states. There may be two stages involved in the stratification process for state 4 fuel, and the liquid viscosity is another factor that cannot be ignored. In the process of selecting a fuel ratio, a larger liquid bridge force between the components can be obtained by properly improving the wetting effect so that the fuel shows better physical stability.
基金This work was funded by the Foundation(No.LJ2020030)from the Project of the Education Department of Liaoning Province,China.
文摘Oil dispersible suspension concentrates are safe,green,and environmentally friendly formulations.Problems such as layering,pasting,and bottoming are frequently encountered during the production,storage,and transportation process.Polyisobutylene succinimide functions as a dispersant and exhibits great potential to improve the physical stability of the oil dispersible suspension concentrate.From a microscopic perspective,the sorption characteristics of the polyisobutylene succinimide dispersant T151 on penoxsulam particle surfaces were comprehensively evaluated with XPS,FTIR,and SEM.The T151 adsorption procedure complied with a pseudo-second-order kinetic adsorption model,and it was a kind of physical sorption with an Ea of 22.57 kJ⋅mol^(−1).The T151 sorption model was consistent with the Langmuir isotherm.The adsorption process was spontaneous and followed by an entropy increase.TheΔH^(θ)of dispersant T151 on the surface of penoxsulam particles was 31.59 kJ⋅mol^(−1).The adsorption procedure was endothermic,and the primary force was hydrogen bonding.The XPS results showed that the F and S electronic peaks at the penoxsulam interface decreased,and that the C electronic peak increased significantly after the adsorption of dispersant T151,indicating the adsorption on the surface of penoxsulam particles.The results of this study provide a vital theoretical basis for the application of polyisobutylene succinimide dispersants in oil dispersible suspension systems.
文摘<span style="font-family:Verdana;">Epilepsy is a chronic and the fourth most common neurological disorder which affects people of all age groups. Recently research and awareness on epilepsy-related deaths have rapidly grown over the past two decades. Many previous studies are attributed to the guidelines that apprise health care professionals in handling these deaths, but there is a relative scarcity of information accessible for clinicians and pharmacists who are responsible for manufacturing or preparing the extemporaneous anti-epileptic suspensions in the hospitals. Mostly in partial seizures, phenytoin is one of the first-choice drugs. In Saudi Arabian hospitals, the extemporaneous preparation of phenytoin suspension is common, but the hot climatic weather in Saudi Arabia possesses stability problems that should be tackled as the prepared suspension should pass all the stability tests to ensure uniform dosage of the extemporaneous formulation. In the current study, the commercial capsules were used to prepare the oral phenytoin sodium extemporaneous suspension. The physical, chemical and microbiological stability of phenytoin sodium suspension is analyzed at various temperatures.</span>
基金financial support from the U.S.National Science Foundation Engineering Research Center for Structured Organic Particulate Systems(NSF ERC for SOPS) through the Grant EEC-0540855
文摘Superdisintegrants are cross-linked polymers that can be used as dispersants for fast release of drug nanoparticles from nanocomposite microparticles during in vitro and in vivo dissolution. Currently avail- able superdisintegrant particles have average sizes of approximately 5-130 μm, which are too big for drug nanocomposite applications. Hence, production of stable superdisintegrant suspensions with less than 5 μm particles is desirable. Here, we explore the preparation of colloidal suspensions of anionic and nonionic superdisintegrants using a wet stirred media mill and assess their physical stability. Sodium starch glycolate (SSG) and crospovidone (CP) were selected as representative anionic and nonionic superdisintegrants, and hydroxypropyl cellulose (HPC) and sodium dodecyl sulfate (SDS) were used as a steric stabilizer and a wetting agent/stabilizer, respectively. Particle sizing, scanning electron microscopy, and zeta potential measurements were used to characterize the suspensions. Colloidal superdisintegrant suspensions were prepared reproducibly. The extensive particle breakage was attributed to the swelling-induced softening in water. SSG suspensions were stable even in the absence of stabilizers, whereas CP suspensions required HPC-SDS for minimizing particle aggregation. These findings were explained by the higher absolute (negative) zeta potential of the suspensions of the anionic superdisintegrant (SSG) as compared with those of the nonionic superdisintegrant (CP).