Effect of external and internal cues on core muscle activation during the Sahrmann five-level core stability test

BACKGROUND Pain in the back or pelvis or fear of back pain may affect the timing or cocontraction of the core muscles.In both static and dynamic movements,the Sahrmann core stability test provides an assessment of core muscle activation and a person's ability to stabilize the lumbopelvic complex.Preparatory cues and images can be used to increase the activation of these muscles.To attain optimal movement patterns,it will be necessary to determine what cueing will give the most effective results for core stability.AIM To investigate the effects of external and internal cues on core muscle activation during the Sahrmann five-level core stability test.METHODS Total 68 participants(21.83±3.47 years)were randomly allocated to an external(n=35)or internal cue group(n=33).Participants performed the Sahrmann fivelevel core stability test without a cue as baseline and the five-level stability exercises with an internal or external cue.External cue group received a pressure biofeedback unit(PBU),and the internal cue group received an audio cue.A Delsys Trigno^(TM)surface electromyography unit was used for muscle activation from the rectus abdominis,external oblique,and transverse abdominis/internal oblique muscles.RESULTS Linear mixed effects model analysis showed that cueing had a significant effect on core muscle activation(P=0.001);however,there was no significant difference between cue types(internal or external)(P=0.130).CONCLUSION Both external and internal cueing have significant effects on core muscle activation during the Sahrmann five-level core stability test and the PBU does not create higher muscle activation than internal cueing.

Physico-Chemical Characterization and Stability Study in Acidic and Basic Solution of Ceramic Filters from Mouka’s Clay (Cameroon)

This paper deals with the characterisation and study of physico-chemical stability of ceramic filters from clays and rice husk obtained from the far north region of Cameroon (Logone Valley) and their application in potable water treatment. Clays from Mouka were characterized by FTIR analysis. The results showed that the filter formulated with a mixture containing 80% clay and 20% rice husk of 100 μm in size each gave the lowest filter shrinkage rate;these formulated filters were chosen for the remaining work. Leaching tests showed that with filters at a sintering temperature of 830°C the leaching was not observed under neutral (pH 6.8) and acidic (pH 5) conditions as compared to 950°C and 1000°C where the leaching was observed. In basic (pH 9) condition, all the filters obtained released ions. Leaching tests revealed that the conductivity of the leachate for the filters sintered at 830°C was lower than those sintered at 950°C and 1000°C. Meanwhile, conductivity decreases with increasing sintering temperature (temperature up to 830°C) due to the fact that ceramization starts as from 850°C that leads to an amorphous state that favours chemical stability, the leaching ions were Fe2+, Ca2+, Mg2+ and Al3+. The ceramic filters sintered at 950°C were applied to the filtration of water and the performance in terms of turbidity reduction was 95% and the flow rate after 50 minutes was 100 × 10−3 L/h.

Physico-Chemical and Microbiological Study for the Stability of Phenytoin Sodium Extemporaneously Compounded Suspension in Saudi Arabia Hospitals

Epilepsy is a chronic and the fourth most common neurological disorder which affects people of all age groups. Recently research and awareness on epilepsy-related deaths have rapidly grown over the past two decades. Many previous studies are attributed to the guidelines that apprise health care professionals in handling these deaths, but there is a relative scarcity of information accessible for clinicians and pharmacists who are responsible for manufacturing or preparing the extemporaneous anti-epileptic suspensions in the hospitals. Mostly in partial seizures, phenytoin is one of the first-choice drugs. In Saudi Arabian hospitals, the extemporaneous preparation of phenytoin suspension is common, but the hot climatic weather in Saudi Arabia possesses stability problems that should be tackled as the prepared suspension should pass all the stability tests to ensure uniform dosage of the extemporaneous formulation. In the current study, the commercial capsules were used to prepare the oral phenytoin sodium extemporaneous suspension. The physical, chemical and microbiological stability of phenytoin sodium suspension is analyzed at various temperatures.

Aromatization of virgin olive oil by seeds of Pimpinella anisum using three different methods:Physico-chemical change and thermal stability of flavored oils

Knowing that flavored products would increase the use of olive oil by non-traditional consumers and enhance the added value of this valuable agricultural product,the virgin olive oil(VOO)was flavored with the seeds of Pimpinella anisum(Green anise)using three different methods:classic maceration,ultrasonic assisted maceration and direct addition of the essential oil(EO).These methodswere compared under two main criteria:time and level of aromatization.The physico-chemical parameters and the thermal stability of flavored oils prepared by the three methods were determined by AOAC titration method and GC–MS analysis so as to compare the aromatization effect of the three methods.The trans-anethole is the major component of the EO of anise seeds as well as the indicator of the level of aromatization.GC/MS analysis results of the flavored oils showed that the diffusion of trans-anethole in the flavored oil by direct addition of EO was very important(36.3%of the total volatile fraction of the flavored oil)in comparison to the oil flavored by ultrasonic assisted maceration or classic maceration(respectively 26.59%and 23.85%).These different aromatization methods ensure an improvement in the quality of VOO with an enrichment in polyphenols estimated at 35%in the case of ultrasonic flavored oil,an increase in the content of carotenoids and chlorophylls(67%and 21%respectively)in the event of aromatization by classic maceration,and a decrease in specific absorbency at 232 nmestimated at 29%during aromatization by addition of EO as well as a decrease in the peroxide value estimated at 26%in oil flavored by classic maceration unlike in oil flavored by ultrasoundwhich has seen an increase of around 20%.The aromatization was able to maintain the stability of the oils and its qualification as VOO with a gain in induction time in the case of treatment at 60℃ estimated at 29 and 27.5 d respectively in oils flavored by addition of EO and by conventional maceration,an improvement resistance to degradation concerning K_(232) and K_(270) of all flavored oils which varied from 15 to 40 d in the case of treatment at 60℃ and 3 h resistance to degradation of oils treated at 130℃ for K_(232).Polyphenols,chlorophyll pigments and carotenoids play an important role in oxidative stability due to their antioxidant nature and their degradation during heating is very complex.All of these physico-chemical changes have increased the thermal stability of flavored oils with better resistance to oxidation of flavored oil by classic maceration in compared to oil flavored by adding EO and the oil flavored by using ultrasound.

Gouge stability controlled by temperature elevation and obsidian addition in basaltic faults and implications for moonquakes

Basalt is a major component of the earth and moon crust.Mineral composition and temperature influence frictional instability and thus the potential for seismicity on basaltic faults.We performed velocitystepping shear experiments on basalt gouges at a confining pressure of 100 MPa,temperatures in the range of 100-400℃ and with varied obsidian mass fractions of 0-100%under wet/dry conditions to investigate the frictional strength and stability of basaltic faults.We observe a transition from velocity-neutral to velocity-weakening behaviors with increasing obsidian content.The frictional stability response of the mixed obsidian/basalt gouges is characterized by a transition from velocitystrengthening to velocity-weakening at 200℃ and another transition to velocity-strengthening at temperatures>300℃.Conversely,frictional strengths of the obsidian-bearing gouges are insensitive to temperature and wet/dry conditions.These results suggest that obsidian content dominates the potential seismic response of basaltic faults with the effect of temperature controlling the range of seismogenic depths.Thus,shallow moonquakes tend to occur in the lower lunar crust due to the corresponding anticipated higher glass content and a projected temperature range conducive to velocity-weakening behavior.These observations contribute to a better understanding of the nucleation mechanism of shallow seismicity in basaltic faults.

Mechanical Modeling and Analysis of Stability Deterioration of Production Well During Marine Hydrate Depressurization Production

Different from oil and gas production,hydrate reservoirs are shallow and unconsolidated,whose mechanical properties deteriorate with hydrate decomposition.Therefore,the formations will undergo significant subsidence during depressurization,which will destroy the original force state of the production well.However,existing research on the stability of oil and gas production wells assumes the formation to be stable,and lacks consideration of the force exerted on the hydrate production well by formation subsidence caused by hydrate decomposition during production.To fill this gap,this paper proposes an analytical method for the dynamic evolution of the stability of hydrate production well considering the effects of hydrate decomposition.Based on the mechanical model of the production well,the basis for stability analysis has been proposed.A multi-field coupling model of the force state of the production well considering the effect of hydrate decomposition and formation subsidence is established,and a solver is developed.The analytical approach is verified by its good agreement with the results from the numerical method.A case study found that the decomposition of hydrate will increase the pulling-down force and reduce the supporting force,which is the main reason for the stability deterioration.The higher the initial hydrate saturation,the larger the reservoir thickness,and the lower the production pressure,the worse the stability or even instability.This work can provide a theoretical reference for the stability maintaining of the production well.

Influence of variable viscosity and double diffusion on the convective stability of a nanofluid flow in an inclined porous channel

The influence of variable viscosity and double diffusion on the convective stability of a nanofluid flow in an inclined porous channel is investigated.The DarcyBrinkman model is used to characterize the fluid flow dynamics in porous materials.The analytical solutions are obtained for the unidirectional and completely developed flow.Based on a normal mode analysis,the generalized eigenvalue problem under a perturbed state is solved.The eigenvalue problem is then solved by the spectral method.Finally,the critical Rayleigh number with the corresponding wavenumber is evaluated at the assigned values of the other flow-governing parameters.The results show that increasing the Darcy number,the Lewis number,the Dufour parameter,or the Soret parameter increases the stability of the system,whereas increasing the inclination angle of the channel destabilizes the flow.Besides,the flow is the most unstable when the channel is vertically oriented.

Probabilistic analysis of tunnel face seismic stability in layered rock masses using Polynomial Chaos Kriging metamodel

Face stability is an essential issue in tunnel design and construction.Layered rock masses are typical and ubiquitous;uncertainties in rock properties always exist.In view of this,a comprehensive method,which combines the Upper bound Limit analysis of Tunnel face stability,the Polynomial Chaos Kriging,the Monte-Carlo Simulation and Analysis of Covariance method(ULT-PCK-MA),is proposed to investigate the seismic stability of tunnel faces.A two-dimensional analytical model of ULT is developed to evaluate the virtual support force based on the upper bound limit analysis.An efficient probabilistic analysis method PCK-MA based on the adaptive Polynomial Chaos Kriging metamodel is then implemented to investigate the parameter uncertainty effects.Ten input parameters,including geological strength indices,uniaxial compressive strengths and constants for three rock formations,and the horizontal seismic coefficients,are treated as random variables.The effects of these parameter uncertainties on the failure probability and sensitivity indices are discussed.In addition,the effects of weak layer position,the middle layer thickness and quality,the tunnel diameter,the parameters correlation,and the seismic loadings are investigated,respectively.The results show that the layer distributions significantly influence the tunnel face probabilistic stability,particularly when the weak rock is present in the bottom layer.The efficiency of the proposed ULT-PCK-MA is validated,which is expected to facilitate the engineering design and construction.

Evaluation of slope stability through rock mass classification and kinematic analysis of some major slopes along NH-1A from Ramban to Banihal, North Western Himalayas

The network of Himalayan roadways and highways connects some remote regions of valleys or hill slopes,which is vital for India’s socio-economic growth.Due to natural and artificial factors,frequency of slope instabilities along the networks has been increasing over last few decades.Assessment of stability of natural and artificial slopes due to construction of these connecting road networks is significant in safely executing these roads throughout the year.Several rock mass classification methods are generally used to assess the strength and deformability of rock mass.This study assesses slope stability along the NH-1A of Ramban district of North Western Himalayas.Various structurally and non-structurally controlled rock mass classification systems have been applied to assess the stability conditions of 14 slopes.For evaluating the stability of these slopes,kinematic analysis was performed along with geological strength index(GSI),rock mass rating(RMR),continuous slope mass rating(CoSMR),slope mass rating(SMR),and Q-slope in the present study.The SMR gives three slopes as completely unstable while CoSMR suggests four slopes as completely unstable.The stability of all slopes was also analyzed using a design chart under dynamic and static conditions by slope stability rating(SSR)for the factor of safety(FoS)of 1.2 and 1 respectively.Q-slope with probability of failure(PoF)1%gives two slopes as stable slopes.Stable slope angle has been determined based on the Q-slope safe angle equation and SSR design chart based on the FoS.The value ranges given by different empirical classifications were RMR(37-74),GSI(27.3-58.5),SMR(11-59),and CoSMR(3.39-74.56).Good relationship was found among RMR&SSR and RMR&GSI with correlation coefficient(R 2)value of 0.815 and 0.6866,respectively.Lastly,a comparative stability of all these slopes based on the above classification has been performed to identify the most critical slope along this road.

Insights into ionic association boosting water oxidation activity and dynamic stability

There have been reports about Fe ions boosting oxygen evolution reaction(OER)activity of Ni-based catalysts in alkaline conditions,while the origin and reason for the enhancement remains elusive.Herein,we attempt to identify the activity improvement and discover that Ni sites act as a host to attract Fe(Ⅲ)to form Fe(Ni)(Ⅲ)binary centres,which serve as the dynamic sites to promote OER activity and stability by cyclical formation of intermediates(Fe(Ⅲ)→Fe(Ni)(Ⅲ)→Fe(Ni)-OH→Fe(Ni)-O→Fe(Ni)OOH→Fe(Ⅲ))at the electrode/electrolyte interface to emit O_(2).Additionally,some ions(Co(Ⅱ),Ni(Ⅱ),and Cr(Ⅲ))can also be the active sites to catalyze the OER process on a variety of electrodes.The Fe(Ⅲ)-catalyzed overall water-splitting electrolyzer comprising bare Ni foam as the anode and Pt/Ni-Mo as the cathode demonstrates robust stability for 1600 h at 1000 mA cm^(-2)@~1.75 V.The results provide insights into the ioncatalyzed effects boosting OER performance.

Physico-Chemical Analysis of Soils Used for Pineapple Cultivation in the Sub-Prefectures of Maferinyah and Friguiagbé (Prefectures of Forécariah and Kindia) Republic of Guinea

Over the years, pineapple production in the Republic of Guinea has become less competitive in the West African sub-region, with a world ranking of 144th. It is therefore only natural to review certain parameters in order to improve this ranking. To do this, certain physico-chemical parameters of soil samples from Friguiagbé and Maferinyah (in the Kindia and Forécariah prefectures) were taken and analysed using the following techniques: Pipette de Robinson, Anne, Bray II, Kapen HICDVITZ, Mc. Lead (1982). The analytical results show that the soils at Friguiagbé in Kindia and Maferinyah in Forécariah are acidic, with pH values of 4.4 and 4.7 (fields I and II) and 4.8 and 4.7 (fields I and II) respectively. The soils have a silty-sandy texture. This study could therefore serve as a guide for the Ministry of Agriculture of the Republic of Guinea.

Effect and mechanism of reductive polyaniline on the stability of nitrocellulose

The search for new green and efficient stabilizers is of great importance for the stabilization of nitrocellulose(NC). This is due to the shortcomings of traditional stabilizers, such as high toxicity. In this study, reduced polyaniline(r-PANI), which has a similar functional structure to diphenylamine(DPA) but is non-toxic, was prepared from PANI based on the action with N_(2)H_(4) and NH_(3)-H_(2)O, and used for the first time as a potential stabilizer for NC. XPS, FTIR, Raman, and SEM were used to characterize the reduced chemical structure and surface morphology of r-PANI. In addition, the effect of r-PANI on the stabilization of NC was characterized using DSC, VST, isothermal TG, and MMC. Thermal weight loss was reduced by 83% and 68% and gas pressure release by 75% and 49% compared to pure NC and NC&3%DPA, respectively.FTIR and XPS were used to characterize the structural changes of r-PANI before and after reaction with NO_(2). The 1535 cm^(-1) and 1341 cm^(-1) of the FTIR and the 404.98 eV and 406.05 eV of the XPS showed that the -NO_(2) was generated by the absorption of NO_(2). Furthermore, the quantum chemical calculation showed that NO_(2) was directly immobilized on r-PANI by forming -NO_(2) in the neighboring position of the benzene ring.

基于COMPASS iStability的浮船坞稳性计算

为比对分段建模与整体建模工作量及稳性计算结果,选取某浮船坞,采用命令流方法,对坞墙无开口,做5分段建模和整体建模稳性计算,对坞墙有开口,做7分段建模和借助体过渡整体建模稳性计算,结果表明,无论坞墙有无开口,整体建模比分段建模节省约一半工作量,两种建模方式稳性计算精度相同,建模过程表明,命令流方法整体建模计算稳性,高效快捷。

Effects of connected automated vehicle on stability and energy consumption of heterogeneous traffic flow system

With the development of intelligent and interconnected traffic system,a convergence of traffic stream is anticipated in the foreseeable future,where both connected automated vehicle(CAV)and human driven vehicle(HDV)will coexist.In order to examine the effect of CAV on the overall stability and energy consumption of such a heterogeneous traffic system,we first take into account the interrelated perception of distance and speed by CAV to establish a macroscopic dynamic model through utilizing the full velocity difference(FVD)model.Subsequently,adopting the linear stability theory,we propose the linear stability condition for the model through using the small perturbation method,and the validity of the heterogeneous model is verified by comparing with the FVD model.Through nonlinear theoretical analysis,we further derive the KdV-Burgers equation,which captures the propagation characteristics of traffic density waves.Finally,by numerical simulation experiments through utilizing a macroscopic model of heterogeneous traffic flow,the effect of CAV permeability on the stability of density wave in heterogeneous traffic flow and the energy consumption of the traffic system is investigated.Subsequent analysis reveals emergent traffic phenomena.The experimental findings demonstrate that as CAV permeability increases,the ability to dampen the propagation of fluctuations in heterogeneous traffic flow gradually intensifies when giving system perturbation,leading to enhanced stability of the traffic system.Furthermore,higher initial traffic density renders the traffic system more susceptible to congestion,resulting in local clustering effect and stop-and-go traffic phenomenon.Remarkably,the total energy consumption of the heterogeneous traffic system exhibits a gradual decline with CAV permeability increasing.Further evidence has demonstrated the positive influence of CAV on heterogeneous traffic flow.This research contributes to providing theoretical guidance for future CAV applications,aiming to enhance urban road traffic efficiency and alleviate congestion.

Enhanced High-Temperature Cycling Stability of Garnet-Based All Solid-State Lithium Battery Using a Multi-Functional Catholyte Buffer Layer

The pursuit of safer and high-performance lithium-ion batteries(LIBs)has triggered extensive research activities on solid-state batteries,while challenges related to the unstable electrode-electrolyte interface hinder their practical implementation.Polymer has been used extensively to improve the cathode-electrolyte interface in garnet-based all-solid-state LIBs(ASSLBs),while it introduces new concerns about thermal stability.In this study,we propose the incorporation of a multi-functional flame-retardant triphenyl phos-phate additive into poly(ethylene oxide),acting as a thin buffer layer between LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)cathode and garnet electro-lyte.Through electrochemical stability tests,cycling performance evaluations,interfacial thermal stability analysis and flammability tests,improved thermal stability(capacity retention of 98.5%after 100 cycles at 60℃,and 89.6%after 50 cycles at 80℃)and safety characteristics(safe and stable cycling up to 100℃)are demonstrated.Based on various materials characterizations,the mechanism for the improved thermal stability of the interface is proposed.The results highlight the potential of multi-functional flame-retardant additives to address the challenges associated with the electrode-electrolyte interface in ASSLBs at high temperature.Efficient thermal modification in ASSLBs operating at elevated temperatures is also essential for enabling large-scale energy storage with safety being the primary concern.

Origin of the Disparity between the Stability of Transmutated Mix-Cation and Mix-Anion Compounds

Transmutation is an efficient approach for material design. For example, ternary compound CuGaSe_(2) in chalcopyrite structure is a promising material for novel optoelectronic and thermoelectric device applications. It can be considered as formed from the binary host compound ZnSe in zinc-blende structure by cation transmutation(i.e., replacing two Zn atoms by one Cu and one Ga). While cation-transmutated materials are common, aniontransmutated ternary materials are rare, for example, Zn_(2)As Br(i.e., replacing two Se atoms by one As and one Br)is not reported. The physical origin for this puzzling disparity is unclear. In this work, we employ first-principles calculations to address this issue, and find that the distinct differences in stability between cation-transmutated(mix-cation) and anion-transmutated(mix-anion) compounds originate from their different trends of ionic radii as functions of their ionic state, i.e., for cations, the radius decreases with the increasing ionic state, whereas for anions, the radius increases with the increasing absolute ionic state. Therefore, for mix-cation compounds,the strain energy and Coulomb energy can be simultaneously optimized to make these materials stable. In contrast, for mix-anion systems, minimization of Coulomb energy will increase the strain energy, thus the system becomes unstable or less stable. Thus, the trend of decreasing strain energy and Coulomb energy is consistent in mix-cation compounds, while it is opposite in mix-anion compounds. Furthermore, the study suggests that the stability strategy for mix-anion compounds can be controlled by the ratio of ionic radii r3/r1, with a smaller ratio indicating greater stability. Our work, thus, elucidates the intrinsic stability trend of transmutated materials and provides guidelines for the design of novel ternary materials for various device applications.

Sodium Nitrate/Formamide Deep Eutectic Solvent as Flame-Retardant and Anticorrosive Electrolyte Enabling 2.6 V Safe Supercapacitors with Long Cyclic Stability

Safe operation of electrochemical capacitors(supercapacitors)is hindered by the flammability of commercial organic electrolytes.Non-flammable Water-in-Salt(WIS)electrolytes are promising alternatives;however,they are plagued by the limited operation voltage window(typically≤2.3 V)and inherent corrosion of current collectors.Herein,a novel deep eutectic solvent(DES)-based electrolyte which uses formamide(FMD)as hydrogen-bond donor and sodium nitrate(NaNO_(3))as hydrogen-bond acceptor is demonstrated.The electrolyte exhibits the wide electrochemical stability window(3.14 V),high electrical conductivity(14.01 mScm^(-1)),good flame-retardance,anticorrosive property,and ultralow cost(7%of the commercial electrolyte and 2%of WIS).Raman spectroscopy and Density Functional Theory calculations reveal that the hydrogen bonds between the FMD molecules and NO_(3)^(-)ions are primarily responsible for the superior stability and conductivity.The developed NaNO_(3)/FMD-based coin cell supercapacitor is among the best-performing state-of-art DES and WIS devices,evidenced by the high voltage window(2.6 V),outstanding energy and power densities(22.77 Wh kg^(-1)at 630 W kg^(-1)and 17.37 kW kg^(-1)at 12.55 Wh kg^(-1)),ultralong cyclic stability(86%after 30000 cycles),and negligible current collector corrosion.The NaNO_(3)/FMD industry adoption potential is demonstrated by fabricating 100 F pouch cell supercapacitors using commercial aluminum current collectors.

Rainfall-triggered waste dump instability analysis based on surface 3D deformation in physical model test

Landslide is the second largest natural disaster after earthquake. It is of significance to study the evolution laws and failure mechanism of landslides based on its surface 3D deformation information. Based on the rainfall-triggered waste dump instability model test, we studied the failure mechanisms of the waste dump by integrating surface deformation and internal slope stress and proposed novel parameters for identifying landslide stability. We developed a noncontact measurement device, which can obtain millimeter-level 3D deformation data for surface scene in physical model test;Then we developed the similar materials and established a test model for a waste dump. Based on the failure characteristics of slope surface, internal stress of slope body and displacement contours during the whole process, we divided the slope instability process in model test into four stages: rainfall infiltration and surface erosion, shallow sliding, deep sliding, and overall instability. Based on the obtained surface deformation data, we calculated the volume change during slope instability process and compared it with the point displacement on slope surface. The results showed that the volume change can not only reflect the slow-ultra acceleration process of slope failure, but also fully reflect the above four stages and reduce the fluctuations caused by random factors. Finally, this paper proposed two stability identification parameters: the volume change rate above the slip surface and the relative velocity of volume change rate. According to the calculation of these two parameters in model test, they can be used for study the deformation and failure mechanism of slope stability.

Functional nanolayers favor the stability of solid-electrolyteinterphase in rechargeable batteries

Rechargeable batteries have brought us lots of convenience and changed the way we live.However,the demand for higher energy density,longer cycle life,and more fast charging ability urges researchers to develop advanced battery material and chemistry[1,2].

Preparation and Thermal Stability of AlMoON Based Solar Selective Absorption Coating

AlMoON based solar selective absorption coatings were deposited on stainless steel substrate by magnetron sputtering.The coatings included infrared reflection layer Mo,absorption layer AlMoN,absorption layer AlMoON and antireflection layer AlMoO from bottom to top.The surface of the deposited coatings is flat without obvious defects.The absorptivity and emissivity are 0.896 and 0.09,respectively,and the quality factor is 9.96.After heat treatment at 500℃-36 h,the surface roughness of the coating increases,a small number of cracks and other defects appear,and the broken part is still attached to the coating surface.A certain degree of element diffusion occurs in the coatings,resulting in the decline of the optical properties of the coatings.The absorptivity and emissivity are 0.883 and 0.131,respectively,the quality factor is 7.06,and the PC value is 0.0335.The coatings do not fail under this condition and have certain thermal stability.