Effects of nitrogen fertilizer on physiological property and yield of wheat at the different soil moisture

The results of pot and pond trials are as follows.On equal amount of nitrogen(N)applied,the wheat nitrate reduction activity(NRA)and photosynthesis strength and other phy-siological properties are stronger and yields are higher at normal soil moisture than those atdrought.At the same soil moisture,in a certain range of N applied,these properties of wheat in-crease with the increasing of N applied,but they descend when the amount of N applied exceedsa certain range.

Physiological Mechanism of Exogenous Selenium in Alleviating Mercury Stress on Pakchoi(Brassica campestris L.)

The objective of this study was to explain the physiological mechanisms through which Na_(2)SeO_(3) mitigates the growth and developmental inhibition of pakchoi under HgCl_(2)stress.The results showed that treatment with HgCl_(2)(40 mg L^(−1))led to reduced biomass,dwarfing,root shortening,and root tip necrosis in pakchoi.Compared to control(CK),the activities of superoxide dismutase(SOD)and peroxidase(POD)in Hg treatment increased,and the content of malondialdehyde(MDA)also dramatically increased,which negatively impacted the growth of pakchoi.Low concentrations of Na_(2)SeO_(3)(0.2 mg L^(−1))significantly increased the content of soluble sugars compared with control,while chlorophyll,soluble proteins,free amino acids,and vitamin C had no significant changes.The results of the mixed treatments with HgCl_(2)and Na_(2)SeO_(3) suggested that selenium may be able to reduce the toxicity of mercury in pakchoi.The biomass,plant height,root length,chlorophyll content,soluble protein,other physiological indicators,and proline showed significant increases compared with the HgCl_(2)treatment.Additionally,the MDA content and mercury accumulation in pakchoi decreased.Our results revealed the antagonistic effects of selenium and mercury in pakchoi.Thus,a theoretical basis for studying pakchoi’s mercuryexcreted and selenium-rich cultivation technology was provided.

Genome-wide association study dissecting drought resistance-associated loci based on physiological traits in common bean

Genetic improvement of drought resistance is one of the main breeding goals for common bean,so molecular markers must be identified to facilitate drought resistance breeding.In this study,we evaluated the proline,trehalose,raffinose,and stachyose contents of 210 common bean accessions under two watering conditions and found large variations in all four.The coefficients of variation ranged from 21.21%for proline content to 78.69%for stachyose content under well-watered conditions,and from 20.11%for proline content to 50.08%for trehalose content under drought stress.According to our genome-wide association analysis,32 quantitative trait loci were associated with drought resistance,seven of which overlapped with known loci.Four hotspot regions were identified at Pv01,Pv07 and Pv11.A set of candidate genes was identified,including genes encoding MYB,bZIP,bHLH,ERF,and protein kinases.Among these genes,Phvul.001G189400,Phvul.007G273000 and Phvul.008G270500 were annotated as bZIP,ERF and WRKY,respectively.These genes are reportedly involved in drought stress responses in Arabidopsis thaliana and were induced by drought stress in common bean.Significant SNPs in six candidate gene regions formed different haplotypes,and phenotypic analysis revealed significant differences among the haplotypes.These results provide new insight into the genetic basis of drought resistance in common bean and reveal candidate genes and superior natural variations that will be useful for improving common bean.

Seed Storability in Rice: Physiological Foundations, Molecular Mechanisms, and Applications in Breeding

Long-term storage of crop seeds is critical for the conservation of germplasm resources, ensuring food supply, and supporting sustainable production. Rice, as a major food staple, has a substantial stock for consumption and production worldwide. However, its food value and seed viability tend to decline during storage. Understanding the physiological responses and molecular mechanisms of aging tolerance forms the basis for enhancing seed storability in rice. This review outlines the latest progress in influential factors, evaluation methods, and identification indices of seed storability. It also discusses the physiological consequences, molecular mechanisms, and strategies for breeding aging-tolerant rice in detail. Finally, it highlights challenges in seed storability research that require future attention. This review offers a theoretical foundation and research direction for uncovering the mechanisms behind seed storability and breeding aging-tolerant rice.

The Economics of Competing Water Uses under a FERC Licensing Agreement: Estimation of Property Value, Recreation, and Hydroelectric Impacts

Reservoirs provide a variety of services with economic values across multiple sectors. As demands for reservoir services continue to grow and precipitation patterns evolve, it becomes ever more important to consider the integrated suite of values and tradeoffs that attend changes in water uses and availability. Section 316 (b) of the Clean Water Act requires that owners of certain water cooled power plants evaluate technologies and operational measures that can reduce their impacts to aquatic organisms. The studies must discuss the social costs and benefits of alternative technologies including cooling towers (79 Fed. Reg. 158, 48300 - 48439). Cooling towers achieve their effect through evaporation. This manuscript estimates the property value, recreation, and hydroelectric generation impacts that could result from the evaporative water loss associated with installing cooling towers at the McGuire Nuclear Generating Station (McGuire) located on Lake Norman, North Carolina. Although this study specifically evaluates the effects of evaporative water loss from cooling towers, its methods are applicable to estimating the economic benefits and costs of a new water user or reduced water input in any complex reservoir system that supports steam electric generation, hydroelectric generation, residential properties, recreation, irrigation, and municipal water use.

Advances in Wireless,Batteryless,Implantable Electronics for Real‑Time,Continuous Physiological Monitoring

This review summarizes recent progress in developing wireless,batteryless,fully implantable biomedical devices for real-time continuous physiological signal monitoring,focusing on advancing human health care.Design considerations,such as biological constraints,energy sourcing,and wireless communication,are discussed in achieving the desired performance of the devices and enhanced interface with human tissues.In addition,we review the recent achievements in materials used for developing implantable systems,emphasizing their importance in achieving multi-functionalities,biocompatibility,and hemocompatibility.The wireless,batteryless devices offer minimally invasive device insertion to the body,enabling portable health monitoring and advanced disease diagnosis.Lastly,we summarize the most recent practical applications of advanced implantable devices for human health care,highlighting their potential for immediate commercialization and clinical uses.

Artificial intelligence in physiological characteristics recognition for internet of things authentication

Effective user authentication is key to ensuring equipment security,data privacy,and personalized services in Internet of Things(IoT)systems.However,conventional mode-based authentication methods(e.g.,passwords and smart cards)may be vulnerable to a broad range of attacks(e.g.,eavesdropping and side-channel attacks).Hence,there have been attempts to design biometric-based authentication solutions,which rely on physiological and behavioral characteristics.Behavioral characteristics need continuous monitoring and specific environmental settings,which can be challenging to implement in practice.However,we can also leverage Artificial Intelligence(AI)in the extraction and classification of physiological characteristics from IoT devices processing to facilitate authentication.Thus,we review the literature on the use of AI in physiological characteristics recognition pub-lished after 2015.We use the three-layer architecture of the IoT(i.e.,sensing layer,feature layer,and algorithm layer)to guide the discussion of existing approaches and their limitations.We also identify a number of future research opportunities,which will hopefully guide the design of next generation solutions.

Implantable Electrochemical Microsensors for In Vivo Monitoring of Animal Physiological Information

In vivo monitoring of animal physiological information plays a crucial role in promptly alerting humans to potential diseases in animals and aiding in the exploration of mechanisms underlying human diseases.Currently,implantable electrochemical microsensors have emerged as a prominent area of research.These microsensors not only fulfill the technical requirements for monitoring animal physiological information but also offer an ideal platform for integration.They have been extensively studied for their ability to monitor animal physiological information in a minimally invasive manner,characterized by their bloodless,painless features,and exceptional performance.The development of implantable electrochemical microsensors for in vivo monitoring of animal physiological information has witnessed significant scientific and technological advancements through dedicated efforts.This review commenced with a comprehensive discussion of the construction of microsensors,including the materials utilized and the methods employed for fabrication.Following this,we proceeded to explore the various implantation technologies employed for electrochemical microsensors.In addition,a comprehensive overview was provided of the various applications of implantable electrochemical microsensors,specifically in the monitoring of diseases and the investigation of disease mechanisms.Lastly,a concise conclusion was conducted on the recent advancements and significant obstacles pertaining to the practical implementation of implantable electrochemical microsensors.

Exogenous calcium enhances the physiological status and photosynthetic capacity of rose under drought stress

Drought(water shortage)can substantially limit the yield and economic value of rose plants(Rosa spp.).Here,we characterized the effect of exogenous calcium(Ca^(2+))on the antioxidant system and photosynthesis-related properties of rose under polyethylene glycol 6000(PEG6000)-induced drought stress.Chlorophyll levels,as well as leaf and root biomass,were significantly reduced by drought;drought also had a major effect on the enzymatic antioxidant system and increased concentrations of reactive oxygen species.Application of exogenous Ca^(2+)increased the net photosynthetic rate and stomatal conductance of leaves,enhanced water-use efficiency,and increased the length and width of stomata following exposure to drought.Organ-specific physiological responses were observed under different concentrations of Ca^(2+).Application of 5 mmol·L^(-1)Ca^(2+)promoted photosynthesis and antioxidant activity in the leaves,and application of 10 mmol·L^(-1)Ca^(2+)promoted antioxidant activity in the roots.Application of exogenous Ca^(2+)greatly enhanced the phenotype and photosynthetic capacity of potted rose plants following exposure to drought stress.Overall,our findings indicate that the application of exogenous Ca^(2+)enhances the drought resistance of roses by promoting physiological adaptation and that it could be used to aid the cultivation of rose plants.

Physiological Response Mechanism and Drought Resistance Evaluation of Passiflora edulis Sims under Drought Stress

In order to explore the response mechanism of Passiflora edulis Sims to drought stress,the changes in morpho-logical and physiological traits of Passiflora edulis Sims under different drought conditions were studied.A total of 7 germplasm resources of Passiflora edulis Sims were selected and tested under drought stress by the pot culture method under 4 treatment levels:75%–80%(Control,CK)of maximumfield water capacity,55%–60%(Light Drought,LD)of maximumfield water capacity,i.e.,mild drought,40%–45%(Moderate Drought,MD)of max-imumfield water capacity,i.e.,moderate drought and 30%–35%(Severe Drought,SD)of maximumfield water capacity,i.e.,severe drought.On the 40th day of drought treatment,13 indices,including seedling growth mor-phology,physiology,and biochemistry,were measured.The results showed that under drought stress,the height and ground diameter of P.edulis Sims gradually decreased with increasing drought stress,and there were signifi-cant differences in seedling height and ground diameter among the treatments.Drought stress significantly inhib-ited the growth of seven P.edulis Sims varieties.The contents of soluble sugar(SS),soluble protein(SP),proline(Pro),and other substances in P.edulis Sims basically increased with increasing drought stress.With the aggrava-tion of drought stress,the malondialdehyde(MDA)content of P.edulis Sims tended to increase to different degrees,the superoxide dismutase(SOD)activity and peroxidase(POD)activity both tended to increase atfirst and then decrease,and the change in catalase(CAT)activity mostly showed a gradual increasing trend.The con-tents of endogenous hormones in P.edulis Sims significantly differed under different degrees of drought stress.With the aggravation of drought stress,the abscisic acid(ABA)content of P.edulis Sims tended to increase,whereas the contents of gibberellin(GA),indoleacetic acid(IAA),and zeatin nucleoside(ZR)exhibited a down-ward trend.A comprehensive evaluation of the drought resistance of seven P.edulis Sims varieties was conducted based on the principal component analysis method,and the results showed that the drought resistance decreased in the order XH-BL>XH-TWZ>TN1>GH1>ZJ-MT>LP-LZ>DH-JW.

Physiological Analysis of Drought Resistance of Seven Cultivars Spring Wheat in Northern Regions of China

In order to determine the physiological mechanism of drought resistance of northern wheat in China,six drought resistant wheat and one sensitivity to drought wheat were planted in pots.They were subjected to drought treatment and normal water when the plants grew to the 3-leaf stage.Samples were collected at 10,20,30,and 40 days after the drought treatment,respectively.The electrical conductivity,photosynthetic parameters,chlorophyll fluorescence parameters,sugar content,proline content,protein content,and active oxygen scavenging enzyme activity of the plants were detected,and the agronomic traits of the wheat varieties were investigated at maturity.The results indicated that the phenotype and yield-related factors of Darkhan 144 changed little under the drought stress.The relative electrical conductivity of Kefeng 6 and Darkhan 166 was lower under the drought stress,and their cell membrane was less damaged.The Darkhan 144 and Darkhan 166 had higher drought resistance coefficients,and were the wheat varieties with stronger drought resistance.However,the physiological mechanisms of drought resistance of these three wheat were different:Darkhan 144 maintained a higher photosynthetic activity under the drought stress;Darkhan 166 maintained a higher protein content,photosynthetic activity and active oxygen scavenging enzyme activity.In addition,other drought-resistant varieties Kefeng 6,Kefeng 10 and Longmai 26 had a higher content of osmoregulatory substances under the drought stress.

Physiological and Transcriptome Analysis Illuminates the Molecular Mechanisms of the Drought Resistance Improved by Alginate Oligosaccharides in Triticum aestivum L.

Alginate oligosaccharides(AOS)enhance drought resistance in wheat(Triticum aestivum L.),but the definite mechanisms remain largely unknown.The physiological and transcriptome responses of wheat seedlings treated with AOS were analyzed under drought stress simulated with polyethylene glycol-6000.The results showed that AOS promoted the growth of wheat seedlings and reduced oxidative damage by improving peroxidase and superoxide dismutase activities under drought stress.A total of 10,064 and 15,208 differentially expressed unigenes(DEGs)obtained from the AOS treatment and control samples at 24 and 72 h after dehydration,respectively,were mainly enriched in the biosynthesis of secondary metabolites(phenylpropanoid biosynthesis,flavonoid biosynthesis),carbohydrate metabolism(starch and sucrose metabolism,carbon fixation in photosynthetic organisms),lipid metabolism(fatty acid elongation,biosynthesis of unsaturated fatty acids,alpha-linolenic acid metabolism,cutin,suberine and wax biosynthesis),and signaling transduction pathways.The up-regulated genes were related to,for example,chlorophyll a-b binding protein,amylosynthease,phosphotransferase,peroxidase,phenylalanine ammonia lyase,flavone synthase,glutathione synthetase.Signaling molecules(including MAPK,plant hormones,H_(2)O_(2) and calcium)and transcription factors(mainly including NAC,MYB,MYB-related,WRKY,bZIP family members)were involved in the AOS-induced wheat drought resistance.The results obtained in this study help underpin the mechanisms of wheat drought resistance improved by AOS,and provides a theoretical basis for the application of AOS as an environmentally sustainable biological method to improve drought resistance in agriculture.

Effects of Light Quality on Growth and Physiological Characteristics of Neopyropia yezoensis Free Living Conchocelis

[Objectives]To study the differences of growth rate,morphology,ultrastructure,pigment content and antioxidant enzyme activity of free-living conchocelis of cultivated type of Neopyropia yezoensis under different light qualities(white,red,blue,and green light).[Methods]The study was carried out through light quality design and culture,growth rate determination,microstructure and ultrastructure observation,chlorophyll a content and carotenoid content determination,phycobiliprotein content determination,malondialdehyde(MDA)content determination,superoxide dismutase(SOD)activity determination.[Results]After 21 d of culture,the specific growth rate(SGR)and chlorophyll a content of free-living conchocelis of N.yezoensis were significantly increased by white light(WL),followed by red light(RL)and green light(GL),and they were the lowest under blue light(BL).Compared with the WL group,the BL group had the highest content of phycoerythrin(PE),and the RL and GL groups had the highest content of phycocyanin(PC).The algal body of WL group was normal black brown,and the cell wall was the thickest.In RL and GL groups,the algal bodies were green,and their diameters and cell wall thicknesses were similar to those in WL group.In BL group,the algal body was bright red,the diameter was the smallest,the cell wall was the thinnest,and the ultrastructure showed that the number of plastoglobulus on the thylakoid was the largest.After BL irradiation,the highest MDA content and the lowest SOD activity were observed.The results revealed that WL is the most beneficial to the growth of free-living conchocelis,followed by RL and GL,while BL has adverse effects.[Conclusions]This study explored the most suitable light quality conditions for the propagation of free-living conchocelis.It is expected to provide germplasm guarantee for the production and seedling of N.yezoensis.

Machine learning-guided accelerated discovery of structure-property correlations in lean magnesium alloys for biomedical applications

Magnesium alloys are emerging as promising alternatives to traditional orthopedic implant materials thanks to their biodegradability,biocompatibility,and impressive mechanical characteristics.However,their rapid in-vivo degradation presents challenges,notably in upholding mechanical integrity over time.This study investigates the impact of high-temperature thermal processing on the mechanical and degradation attributes of a lean Mg-Zn-Ca-Mn alloy,ZX10.Utilizing rapid,cost-efficient characterization methods like X-ray diffraction and optical microscopy,we swiftly examine microstructural changes post-thermal treatment.Employing Pearson correlation coefficient analysis,we unveil the relationship between microstructural properties and critical targets(properties):hardness and corrosion resistance.Additionally,leveraging the least absolute shrinkage and selection operator(LASSO),we pinpoint the dominant microstructural factors among closely correlated variables.Our findings underscore the significant role of grain size refinement in strengthening and the predominance of the ternary Ca_(2)Mg_(6)Zn_(3)phase in corrosion behavior.This suggests that achieving an optimal blend of strength and corrosion resistance is attainable through fine grains and reduced concentration of ternary phases.This thorough investigation furnishes valuable insights into the intricate interplay of processing,structure,and properties in magnesium alloys,thereby advancing the development of superior biodegradable implant materials.

Semi-implantable device based on multiplexed microfilament electrode cluster for continuous monitoring of physiological ions

Modern medicine is increasingly interested in advanced sensors to detect and analyze biochemical indicators.Ion sensors based on potentiometric methods are a promising platform for monitoring physiological ions in biological subjects.Current semi-implantable devices are mainly based on single-parameter detection.Miniaturized semi-implantable electrodes for multiparameter sensing have more restrictions on the electrode size due to biocompatibility considerations,but reducing the electrode surface area could potentially limit electrode sensitivity.This study developed a semi-implantable device system comprising a multiplexed microfilament electrode cluster(MMEC)and a printed circuit board for real-time monitoring of intra-tissue K^(+),Ca^(2+),and Na^(+)concentrations.The electrode surface area was less important for the potentiometric sensing mechanism,suggesting the feasibility of using a tiny fiber-like electrode for potentiometric sensing.The MMEC device exhibited a broad linear response(K^(+):2–32 mmol/L;Ca^(2+):0.5–4 mmol/L;Na^(+):10–160 mmol/L),high sensitivity(about 20–45 mV/decade),temporal stability(>2weeks),and good selectivity(>80%)for the above ions.In vitro detection and in vivo subcutaneous and brain experiment results showed that the MMEC system exhibits good multi-ion monitoring performance in several complex environments.This work provides a platform for the continuous real-time monitoring of ion fluctuations in different situations and has implications for developing smart sensors to monitor human health.

Mechanical Property and Microstructure of Cement Mortar with Carbonated Recycled Powder

Carbonated recycled powder as cementitious auxiliary material can reduce carbon emissions and realize high-quality recycling of recycled concrete.In this paper,microscopic property of recycled powder with three carbonation methods was tested through XRD and SEM,the mechanical property and microstructure of recycled powder mortar with three replacement rates were studied by ISO method and SEM,and the strengthening mechanism was analyzed.The results showed that the mechanical property of recycled powder mortar decreased with the increasing of replacement rate.It is suggested that the replacement rate of recycled powder should not exceed 20%.The strength index and activity index of carbonated recycled powder mortar were improved,in which the flexural strength was increased by 27.85%and compressive strength was increased by 20%at the maximum.Recycled powder can be quickly and completely carbonated,and the improvement effect of CH pre-soaking carbonation was the best.The activity index of carbonated recycled powder can meet the requirements of Grade II technical standard for recycled powder.Microscopic results revealed the activation mechanism of carbonated recycled powder such as surplus calcium source effect,alkaline polycondensation effect and carbonation enhancement effect.

Adhesion property of AlCrNbSiTi high-entropy alloy coating on zirconium:experimental and theoretical studies

Experimental scratch tests and first-principles calculations were used to investigate the adhesion property of AlCrNbSiTi high-entropy alloy(HEA)coatings on zirconium substrates.AlCrNbSiTi HEA and Cr coatings were deposited on Zr alloy substrates using multi-arc ion plating technology,and scratch tests were subsequently conducted to estimate the adhesion property of the coatings.The results indicated that Cr coatings had better adhesion strength than HEA coatings,and the HEA coatings showed brittleness.The special quasi-random structure approach was used to build HEA models,and Cr/Zr and HEA/Zr interface models were employed to investigate the cohesion between the coatings and Zr substrate using first-principles calculations.The calculated interface energies showed that the cohesion between the Cr coating and the Zr substrate was stronger than that of the HEA coating with Zr.In contrary to Al or Si in the HEA coating,Cr,Nb,and Ti atoms binded strongly with Zr substrate.Based on the calculated elastic constants,it was found that low Cr and high Al content decreased the mechanical performances of HEA coatings.Finally,this study demonstrated the utilization of a combined approach involving first-principles calculations and experimental studies for future HEA coating development.

Transition metal coordination polymers with flexible dicarboxylate ligand:Synthesis,characterization,and photoluminescence property

Under solvothermal conditions,six new coordination polymers(CPs)[Mn(L)(phen)(H_(2)O)]_(n)(1),[Co(L)(phen)(H_(2)O)]_(n)(2),[Cu(L)(phen)(H_(2)O)]_(n)(3),[Zn_(2)(L)_(2)(phen)2(H_(2)O)]_(n)(4),[Zn(L)(phen)]_(n)(5),and[Cd(L)(phen)2]_(n)(6)were synthesized by reactions of dicarboxylate ligand 2,2'-(1,2-phenylenebis(methylene))bis(sulfanediyl)dinobutyric acid(H_(2)L)and 1,10-phenanthroline(phen)with the corresponding metal salts.Complexes 1-6 have been structurally characterized by single-crystal X-ray diffraction analyses,elemental analysis,IR,thermogravimetric analysis,and powder X-ray diffraction.The structures of 1-6 are 1D chains,which are further connected by hydrogen bonding interac-tions to form 3D supramolecular structures.Among them,1 and 2 are isomorphic with L2-of syn-conformation,while L2-shows anti-conformation in 3-6.In addition,the solid-state photoluminescence property of 4-6 was investigated.

Effect of Cryogenic Treatment on Microstructure and Tribological Property Evolution of Electron Beam Melted Ti6Al4V

Cryogenic treatment was used to improve the tribological properties of Ti6Al4V artificial hip joint implants.Cryogenic treatment at-196℃with different holding time were carried out on Ti6Al4V specimens fabricated using electron beam melting(EBM),and their microstructure and tribological properties evolution were systematically analyzed by scanning electron microscopy(SEM),vickers hardness,and wear tests.The experimental results show that the as-fabricated specimen consists of lamellarαphase andβcolumnar crystal.While,the thickness of lamellarαphase decreased after cryogenic treatment.In addition,it can be found that the fineαphase was precipitated and dispersed between the lamellarαphase with the holding time increase.Vickers hardness shows a trend of first increasing and then decreasing.The wear rate of the specimen cryogenic treated for 24 h is the minimum and the average friction coefficient is 0.50,which is reduced by 14.61%compared with the as-fabricated.The wear mechanism of the as-fabricated specimen is severe exfoliation,adhesive,abrasive,and slight fatigue wear.However,the specimen cryogenic treated for 24 h shows slight adhesive and abrasive wear.It can be concluded that it is feasibility of utilizing cryogenic treatment to reduce the wear of EBMed Ti6Al4V.

Capillary Property of Entangled Porous Metallic Wire materials and Its Application in Fluid Buffers:Theoretical Analysis and Experimental Study

Strong impact does serious harm to the military industries so it is necessary to choose reasonable cushioning material and design effective buffers to prevent the impact of equipment.Based on the capillary property entangled porous metallic wire materials(EPMWM),this paper designed a composite buffer which uses EPMWM and viscous fluid as cushioning materials under the low-speed impact of the recoil force device of weapon equipment(such as artillery,mortar,etc.).Combined with the capillary model,porosity,hydraulic diameter,maximum pore diameter and pore distribution were used to characterize the pore structure characteristics of EPMWM.The calculation model of the damping force of the composite buffer was established.The low-speed impact test of the composite buffer was conducted.The parameters of the buffer under low-speed impact were identified according to the model,and the nonlinear model of damping force was obtained.The test results show that the composite buffer with EPMWM and viscous fluid can absorb the impact energy from the recoil movement effectively,and provide a new method for the buffer design of weapon equipment(such as artillery,mortar,etc.).