Discontinuous bifurcation and coexistence of attractors in a piecewise linear map with a gap

Coexistence of attractors with striking characteristics is observed in this work, where a stable period-5 attractor coexists successively with chaotic band-ll, period-6, chaotic band-12 and band-6 attractors. They are induced by dif- ferent mechanisms due to the interaction between the discontinuity and the non-invertibility. A characteristic boundary collision bifurcation, is observed. The critical conditions are obtained both analytically and numerically.

Piecewise linear recursive convolution FDTD method for magnetized plasmas

The piecewise linear recursive convolution （PLRC） finite-different time-domain （FDTD） method greatly improves accuracy over the original recursive convolution （RC） FDTD approach but retains its speed and efficiency advantages. A PLRC-FDTD formulation for magnetized plasma which incorporates both anisotropy and frequency dispersion at the same time is presented, enabled the transient analysis of magnetized plasma media. The technique is illustrated by numerical simulations the reflection and transmission coefficients through a magnetized plasma layer. The results show that the PLRC-FDTD method has significantly improved the accuracy over the original RC method.

MULTIDIMENSIONAL MULTI-KNOTS PIECEWISE LINEAR SPECTRAL SEQUENCES

Motivated by representing multidimensional periodic nonlinear and non-stationary signals （functions）, we study a class of orthonormal exponential basis for L2（Id） with I ：= [0, 1）, whose exponential parts are piecewise linear spectral sequences with p-knots. It is widely applied in time-frequency analysis.

Longwall mining automation horizon control:Coal seam gradient identification using piecewise linear fitting

Horizon control, maintaining the alignment of the shearer's exploitation gradient with the coal seam gradient, is a key technique in longwall mining automation. To identify the coal seam gradient, a geological model of the coal seam was constructed using in-seam seismic surveying technology. By synthesizing the control resolution of the range arm and the geometric characteristics of the coal seam, a gradient identification method based on piecewise linear representation(PLR) is proposed. To achieve the maximum exploitation rate within the shearer's capacity, the control resolution of the range arm is selected as the threshold parameter of PLR. The control resolution significantly influenced the number of line segments and the fitting error. With the decrease of the control resolution from 0.01 to 0.02 m, the number of line segments decreased from 65 to 15, which was beneficial to horizon control. However, the average fitting error increased from 0.055 to 0.14 m, which would induce a decrease in the exploitation rate. To avoid significant deviation between the cutting range and the coal seam, the control resolution of the range arm must be lower than 0.02 m. In a field test, the automated horizon control of the longwall face was realized by coal seam gradient identification.

A Revised Piecewise Linear Recursive Convolution FDTD Method for Magnetized Plasmas

The piecewise linear recursive convolution （PLRC） finite-different time-domain （FDTD） method improves accuracy over the original recursive convolution （RC） FDTD approach and current density convolution （JEC） but retains their advantages in speed and efficiency. This paper describes a revised piecewise linear recursive convolution PLRC-FDTD formulation for magnetized plasma which incorporates both anisotropy and frequency dispersion at the same time, enabling the transient analysis of magnetized plasma media. The technique is illustrated by numerical simulations of the reflection and transmission coefficients through a magnetized plasma layer. The results show that the revised PLRC-FDTD method has improved the accuracy over the original RC FDTD method and JEC FDTD method.

A new chaotic Hopfield network with piecewise linear activation function

This paper presents a new chaotic Hopfield network with a piecewise linear activation function. The dynamic of the network is studied by virtue of the bifurcation diagram, Lyapunov exponents spectrum and power spectrum. Numerical simulations show that the network displays chaotic behaviours for some well selected parameters.

H_∞ controller synthesis of piecewise discrete time linear systems

This paper presents an H∞ controller design method for piecewise discrete time linear systems based on a piecewise quadratic Lyapunov function. It is shown that the resulting closed loop system is globally stable with guaranteed H∞ performance and the controller can be obtained by solving a set of bilinear matrix inequalities. It has been shown that piecewise quadratic Lyapunov functions are less conservative than the global quadratic Lyapunov functions. A simulation example is also given to illustrate the advantage of the proposed approach.

Noise destroys the coexistence of periodic orbits of a piecewise linear map

The effects of Gaussian white noise and Gaussian colored noise on the periodic orbits of period-5（P-5） and period-6（P-6） in their coexisting domain of a piecewise linear map are investigated numerically.The probability densities of some orbits are calculated.When the noise intensity is D = 0.0001,only the orbits of P-5 exist,and the coexisting phenomenon is destroyed.On the other hand,the self-correlation time τ of the colored noise also affects the coexisting phenomenon.When τc〈τ〈τc,only the orbits of P-5 appear,and the stability of the orbits of P-5 is enhanced.However,when τ〉τc（τc and τc are critical values）,only the orbits of P-6 exist,and the stability of the P-6 orbits is enhanced greatly.When τ〈τc,the orbits of P-5 and P-6 coexist,but the stability of the P-5 orbits is enhanced and that of P-6 is weakened with τ increasing.

SOME GENERAL THEOREMS AND GENERALIZED AND PIECEWISE GENERALIZED VARIATIONAL PRINCIPLES FOR LINEAR ELASTODYNAMICS

From the concept of four-dimensional space and under the four kinds of time limit conditions, some general theorems for elastodynamics are developed, such as the principle of possible work action, the virtual displacement principle, the virtual stress-momentum principle, the reciprocal theorems and the related theorems of time terminal conditions derived from it. The variational principles of potential energy action and complementary energy action, the H-W principles, the H-R principles and the constitutive variational principles for elastodynamics are obtained. Hamilton's principle, Toupin's work and the formulations of Ref. [5], [17]-[24] may be regarded as some special cases of the general principles given in the paper. By considering three cases: piecewise space-time domain, piecewise space domain, piecewise time domain, the piecewise variational principles including the potential, the complementary and the mixed energy action fashions are given. Finally, the general formulation of piecewise variational principles is derived. If the time dimension is not considered, the formulations obtained in the paper will become the corresponding ones for elastostatics.

Synchronization and Stability of a Nonlinear Vibrating Mechanical System Characterized by Asymmetrical Piecewise Linearity

In previous studies about the synchronization of vibrators,the restoring forces of springs are mainly treated as linear directly,whereas the nonlinear features are rarely considered in vibrating systems.To make up this drawback,a dynamical model of a nonlinear vibrating mechanical system with double rigid frames(RFs),driven by two vibrators,is proposed to explore the synchronization and stability of the system.In this paper,the nonlinearity is reflected in nonlinear restoring forces of springs characterized by asymmetrical piecewise linear,where the nonlinear stiffness of springs is linearized equivalently using the asymptotic method.Based on the average method and Hamilton’s principle,the theory conditions to achieve synchronization and stability of two vibrators are deduced.After the theory analyses,some numerical qualitative analyses are given to reveal the coupling dynamical characteristics of the system and the relative motion properties between two RFs.Besides,some experiments are carried out to examine the validity of the theoretical results and the correctness of the numerical analyses results.Based on the comparisons of the theory,numeric and experiment,the ideal working regions of the system are suggested.Based on the present work,some new types of vibrating equipment,such as vibrating discharging centrifugal dehydrators/conveyers/screens,can be designed.

Characteristics of piecewise linear symmetric tri-stable stochastic resonance system and its application under different noises

Weak signal detection has become an important means of mechanical fault detections. In order to solve the problem of poor signal detection performance in classical tristable stochastic resonance system(CTSR), a novel unsaturated piecewise linear symmetric tristable stochastic resonance system(PLSTSR) is proposed. Firstly, by making the analysis and comparison of the output and input relationship between CTSR and PLSTSR, it is verified that the PLSTSR has good unsaturation characteristics. Then, on the basis of adiabatic approximation theory, the Kramers escape rate, the mean first-passage time(MFPT), and output signal-to-noise ratio(SNR) of PLSTSR are deduced, and the influences of different system parameters on them are studied. Combined with the adaptive genetic algorithm to synergistically optimize the system parameters, the PLSTSR and CTSR are used for numerically simulating the verification and detection of low-frequency, high-frequency,and multi-frequency signals. And the results show that the SNR and output amplitude of the PLSTSR are greatly improved compared with those of the CTSR, and the detection effect is better. Finally, the PLSTSR and CTSR are applied to the bearing fault detection under Gaussian white noise and Levy noise. The experimental results also show that the PLSTSR can obtain larger output amplitude and SNR, and can detect fault signals more easily, which proves that the system has better performance than other systems in bearing fault detection, and has good theoretical significance and practical value.

Output feedback controller design for uncertain piecewise linear systems

This paper proposes output feedback controller design methods for uncertain piecewise linear systems based on piecewise quadratic Lyapunov function. The α-stability of closed-loop systems is also considered. It is shown that the output feedback controller design procedure of uncertain piecewise linear systems with α-stability constraint can be cast as solving a set of bilinear matrix inequalities （BMIs）. The BMIs problem in this paper can be solved iteratively as a set of two convex optimization problems involving linear matrix inequalities （LMIs） which can be solved numerically efficiently. A numerical example shows the effectiveness of the proposed methods.

Chaotic oscillations in a piecewise linear spring-mass system

Chaotic oscillations are useful in assessing the health of a structure. Hence, simple chaotic systems which can easily be realized mechanically or electro-mechanically are highly desired. We study a new pieeewise linear spring-tnass system. The chaotic behaviour in this system is characterized using bifurcation diagrams and the invariant parameters of the dynamics. We also show that there exists a stochastic analogue of this system, which mimics the dynamical features of its deterministic counterpart. This allows a greater flexibility in practical designs as the chaotic oscillations are obtained either deterministically or stochastically. Also, the oscillations are low dimensional, which reduces the computational resources needed for obtaining the invariant parameters of this system.

Knowledge Discovery in Learning Management System Using Piecewise Linear Regression

Recent developments in database technology have seen a wide variety of data being stored in huge collections. The wide variety makes the analysis tasks of a generic database a strenuous task in knowledge discovery. One approach is to summarize large datasets in such a way that the resulting summary dataset is of manageable size. Histogram has received significant attention as summarization/representative object for large database. But, it suffers from computational and space complexity. In this paper, we propose an idea to transform the histogram object into a Piecewise Linear Regression (PLR) line object and suggest that PLR objects can be less computational and storage intensive while compared to those of histograms. On the other hand to carry out a cluster analysis, we propose a distance measure for computing the distance between the PLR lines. Case study is presented based on the real data of online education system LMS. This demonstrates that PLR is a powerful knowledge representative for very large database.

Stability Analysis of Uncertain Discrete-Time Piecewise Linear Systems with Time Delays

This paper considers the stability analysis of uncertain discrete-time piecewise linear systems with time delays based on piecewise Lyapunov-Krasovskii functionals. It is shown that the stability can be established for the control systems if there is a piecewise Lyapunov-Krasovskii functional, and moreover, the functional can be obtained by solving a set of linear matrix inequalities （LMIs） that are numerically feasible. A numerical example is given to demonstrate the efficiency and advantage of the proposed method.

Two-dimensional face stability analysis in rock masses governed by the Hoek-Brown strength criterion with a new multi-horn mechanism

The face stability problem is a major concern for tunnels excavated in rock masses governed by the Hoek-Brown strength criterion.To provide an accurate prediction for the theoretical solution of the critical face pressure,this study adopts the piecewise linear method(PLM)to account for the nonlinearity of the strength envelope and proposes a new multi-horn rotational mechanism based on the Hoek-Brown strength criterion and the associative flow rule.The analytical solution of critical support pressure is derived from the energy-work balance equation in the framework of the plastic limit theorem;it is formulated as a multivariable nonlinear optimization problem relying on 2m dependent variables(m is the number of segments).Meanwhile,two classic linearized measures,the generalized tangential technique(GTT)and equivalent Mohr-Coulomb parameters method(EMM),are incorporated into the analysis for comparison.Surprisingly,the parametric study indicates a significant improvement in support pressure by up to 13%compared with the GTT,and as expected,the stability of the tunnel face is greatly influenced by the rock strength parameters.The stress distribution on the rupture surface is calculated to gain an intuitive understanding of the failure at the limit state.Although the limit analysis is incapable of calculating the true stress distribution in rock masses,a rough approximation of the stress vector on the rupture surface is permitted.In the end,sets of normalized face pressure are provided in the form of charts for a quick assessment of face stability in rock masses.

An easy,convenient statistical method to analyze bark beetle populations

A non-invasive method to estimate the number of Trypodendron lineatum holes on dead standing pines(Pinus sylvestris L.)was developed using linear and nonlinear estimations.A clas sical linear regres sion model was first used to analyze the relationship between the number of holes caused by T.lineatum on selected stem units and the total number of holes on an entire dead stem of P.sylvestris.Then,to obtain a better fit of the regression function to the data for the stem unit selected in the first step,piecewise linear regression(PLR)was used.Last,in an area used to evaluate wood decomposition(method validation),the total and mean numbers of T.lineatum holes were estimated for single dead trees and for a sample(n=8 dead trees).Data were collected in 2009(data set D1),in 2010-2014(data set D2)and in 2020(data set D3)in forests containing P.sylvestris located within Suchedniow-Oblegorek Landscape Park,Poland.A model was constructed with three linear equations.An evaluation of model accuracy showed that it was highly effective regardless of the density of T.lineatum holes and sample size.The method enables the evaluation of the biological role of this species in the decomposition of dead standing wood of P.sylvestris in strictly protected areas.

Study of a smart platform based on backstepping control method

A structural model is significant for the verification of structural control algorithms. However, for nonlinear behavior, experiments are mostly destructive tests that are costly, and conducting repetitive structural experiments is difficult. Therefore, a repetitive structural vibration model is important for structural vibration control. In this study, a smart platform to realize different structural behaviors is developed based on the backstepping control algorithm. Lyapunov functions are used to derive the control law. Simulations show that the designed model can track the structural responses of different arbitrary linear structures very well. In addition, the proposed platform can track responses of different piecewise linear structures and desired models with various hysteresis very well. Numerical results verify the effectiveness of the proposed tracking controller through the backstepping method for the established platform.

Pseudo-Random Sequences Generator Based on Discrete Hyperchaotic Systems

We first design a discrete hyperchaotic system via piece-wise linear state feedback. The states of the closed loop system are locally expanding in two directions but absolutely bounded on the whole, which implies hyperchaos. Then, we use three suchlike hyperchaotic systems with different feedback gain matrices to design a pseudo-random sequence generator (PRSG). Through a threshold function, three sub-sequences generated from the output of piecewise linear functions are changed into 0-1 sequences. Then, followed by XOR operation, an unpredictable pseudo-random sequence (PRS) is ultimately obtained. The analysis and simulation results indicate that the PRS, generated with hyperchaotic systems, has desirable statistical features.

Global Optimization of Nonlinear Blend-Scheduling Problems

The scheduling of gasoline-blending operations is an important problem in the oil refining industry. Thisproblem not only exhibits the combinatorial nature that is intrinsic to scheduling problems, but alsonon-convex nonlinear behavior, due to the blending of various materials with different quality properties.In this work, a global optimization algorithm is proposed to solve a previously published continuous-timemixed-integer nonlinear scheduling model for gasoline blending. The model includes blend recipe optimi-zation, the distribution problem, and several important operational features and constraints. The algorithmemploys piecewise McCormick relaxation （PMCR） and normalized multiparametric disaggregation tech-nique （NMDT） to compute estimates of the global optimum. These techniques partition the domain of oneof the variables in a bilinear term and generate convex relaxations for each partition. By increasing the num-ber of partitions and reducing the domain of the variables, the algorithm is able to refine the estimates ofthe global solution. The algorithm is compared to two commercial global solvers and two heuristic methodsby solving four examples from the literature. Results show that the proposed global optimization algorithmperforms on par with commercial solvers but is not as fast as heuristic approaches.