A simplified approach for negative skin friction calculation of special-shaped pile considering pile-soil interaction under surcharge

A simplified approach was proposed to analyze the negative skin friction calculation of special-shaped pile considering pile-soil interaction under surcharge. Based on the concentric cylinder shearing theory, considering the changes of pile shape(such as, taper angle and diameters of pile base, etc.), the load-transfer of special-shaped pile was built. The accuracy of the developed simplified approach was verified by numerical simulation model with the same condition. Then, the influence factors, such as, taper angles, the diameter of pile base, surcharge, and pile-soil interface parameters were analyzed and discussed. The results show that the developed simplified approach can calculate NSF of special-shaped pile under surcharge effectively. A limited parametric study indicates that in many practical situations special-shaped piles(such as belled wedge pile shown in this work) offer a design option that is more economical than traditional uniform cross-section piles.

3D finite element analysis on pile-soil interaction of passive pile group

The interaction between pile and soft soil of the passive pile group subjected to soil movement was analyzed with three-dimensional finite element model by using ANSYS software. The soil was assumed to be elastic-plastic complying with the Drucker-Prager yield criterion in the analysis. The large displacement of soil was considered and contact elements were used to evaluate the interaction between pile and soil. The influences of soil depth of layer and number of piles on the lateral pressure of the pile were investigated, and the lateral pressure distributions on the (2×1) pile group and on the (2×2) pile group were compared. The results show that the adjacent surcharge may result in significant lateral movement of the soft soil and considerable pressure on the pile. The pressure acting on the row near the surcharge is higher than that on the other row, due to the "barrier" and arching effects in pile groups. The passive load and its distribution should be taken into account in the design of the passive piles.

The Boundary Element Method for Pile-Soil Interaction

In this paper, several mathmatical models for the pile- soil interaction are outlined. The Boundary Element Method is one of the very effective methods for the reasonable models of elasticity and elastoplasticity. The major of this paper is concerned with the Boundary Element Method for the pile-soil interaction, including general methods and calculating formulation of static and dynamic analysis of the pile and pile groups. Some results of analysis are also given.

The mechanical response of piles with consideration of pile-soil interactions under a periodic wave pressure

The pile-soil interaction under wave loads is an extremely complex and difficult issue in engineering. In this study, a physical model test is designed based on the principle of the gravity similarity to obtain time histories of wave forces of unsteady regular waves, and to measure the magnitude and the distribution of wave forces acting on the piles. A numerical model and relevant numerical methods for the pile-soil contact surface are adopted based on the principles of elastic dynamics. For a practical project, the time histories of wave forces on the piles are obtained through physical model tests. The deformations of the piles in the pile-soil interactions and the distribution of the bending moment on the piles are studied. It is shown that, with the increase of the period of wave pressures, the absolute value of the horizontal displacement of the piles increases, the embedment depth of the piles increases, and the scope of influence of soils increases. The change of the bending moment on the piles is consistent with that of its theoretical results, and the proposed numerical method can very well simulate the properties of the piles.

Comparative Analysis of Seismic Response Characteristics of Pile-Soil-Stnicture Interaction System

The study on the earthquake-resistant performance of a pile-soil-structure interaction system is a relatively complicated and primarily important issue in civil engineering practice. In this paper, a computational model and computation procedures for pile-supported structures, which can duly consider the pile-soil interaction effect, arc established by the finite clement method. Numerical implementation is made in the time domain. A simplified approximation for the seismic response analysis of pile-soil-structure systems is briefly presented. Then a comparative study is performed for an engineering example with numerical results computed respectively by the finite clement method and the simplified method. Through comparative analysis, it is shown that the results obtained by the simplified method well agree with those achieved by the finite element method. The numerical results and findings will offer instructive guidelines for earthquake-resistant analysis and design of pile-supported structures.

Simplified analytical solution for stress concentration ratio of piled embankments incorporating pile–soil interaction

Piled embankments have been extensively used for high-speed rail over soft soils because of their effectiveness in minimizing differential settlement and shortening the construction period.Stress concentration ratio,defined as the ratio of vertical stress carried by pile heads(or pile caps if applicable)to that by adjacent soils,is a fundamental parameter in the design of piled embankments.In view of the complicated load transfer mechanism in the framework of embankment system,this paper presents a simplified analytical solution for the stress concentration ratio of rigid pile-supported embankments.In the derivation,the effects of cushion stiffness,pile–soil interaction,and pile penetration behavior are considered and examined.A modified linearly elastic-perfectly plastic model was used to analyze the mechanical response of a rigid pile–soil system.The analytical model was verified against field data and the results of numerical simulations from the literature.According to the proposed method,the skin friction distribution,pile–soil relative displacement,location of neural point,and differential settlement between the pile head(or cap)and adjacent soils can be determined.This work serves as a fast algorithm for initial and reasonable approximation of stress concentration ratio on the design aspects of piled embankments.

Pile-clayey soil interaction analysis by boundary element method

This paper is an attempt to solve the soil-pile interaction problems using the boundary element method（BEM）.A computer package called PGroupN,which deals mainly with the analysis of the pile group problem,is employed in this study.Parametric studies are carried out to assess the impacts of the pile diameter,pile length,ratio of spacing to diameter and the thickness of soil stratum.The external load is applied incrementally and,at each increment,a check is made that the stress state at the pile-soil interfaces does not violate the yield criteria.This is achieved by specifying the limited stresses of the soil for the axial pile shaft capacity and end-bearing resistance.The elements of the pile-soil interface yielded can take no additional load,and any increase in load is therefore redistributed between the remaining elements until all elements have failed.Thus,by successive application of loading increments,the entire load-displacement relationship for the pile group is determined.It is found that as the applied load reaches the ultimate bearing capacity of the pile group,all the piles will share the same amount of load.An exception to this case is for the center pile in a group of 9 piles embedded in clay,which is not consistent with the behaviors of the other piles in the group even if the load reaches the ultimate state.For the 4 piles group embedded in clay,the maximum load carried by the base does not exceed 8% of the load carried by each pile with different diameters.This low percentage ascertains that the piles embedded in cohesive soils carry most of the load throughout their shafts.

Elastoplastic solutions for single piles under combined vertical and lateral loads

In order to improve the reliability of the design and calculation of single piles under the combined vertical and lateral loads, the solutions were presented based on the subgrade reaction method, in which the ultimate soil resistance was considered and the coefficient of subgrade reaction was assumed to be a constant. The corresponding computational program was developed using FORTRAN language. A comparison between the obtained solutions and the model test results was made to show the validity of the obtained solutions. The calculation results indicate that both the maximum lateral displacement and bending moment increase with the increase of the vertical and lateral loads and the pile length above ground, while decrease as the pile stiffness, the coefficient of subgrade reaction and the yielding displacement of soil increase. It is also shown that the pile head condition controls the pile responses and the vertical load may cause the instability problem to the pile. In general, the proposed method can be employed to calculate the pile responses independent of the magnitude of the pile deflection.

基于扰动状态概念的桩–土相互作用的新荷载渐进性传递模型

结合扰动状态理论(DSC),详细地分析了桩–土相互作用的荷载渐进性传递机制,提出基于DSC的荷载传递函数及其参数辨识方法。基于Matlab编程,重点分析了模型参数对τ-s曲线的影响规律。分析结果表明,参数η对桩土界面的强度特性的影响具有决定性作用,反映了桩土界面单元强度分布的集中程度,合理地选取参数η可以较好地描述桩–土界面的硬化、软化及弹塑性特性;参数ξ、τ-f对界面的强度特性影响较小,参数的改变只对最大侧摩阻力值产生影响,ξ、τ-f越大,侧阻力的极值也越大,但对τ_s曲线的线形几乎无影响;参数k对界面强度特性和τ-s曲线的线形都有一定的影响,k越大峰值强度越大,界面强度越高,达到侧摩阻力峰值所对应的界面位移越小。结合依托工程,理论模型计算结果与现场试桩实测值吻合较好,检验了该模型的正确与可靠性,对工程实际具有重要指导意义。

Numerical Simulation for Progressive Collapse of Continuous Girder Bridge Subjected to Ship Impact

The three-stage simulation method based on LS-DYNA was introduced in this study to simulate the progressive collapse of a continuous girder bridge after a ship-bridge collision. The pile-soil dynamic interaction and the initial stress and deformation of the whole bridge before the collision were considered. By analyzing the damage, deformation, stress distribution and collapse process of the whole bridge, the results show that the displacement response of the cap beam lags behind the pile cap. The response order of the whole bridge's components depends on their distances from the collision region. The plastic deformation of soil around piles has a positive effect on delaying the further increase in the displacement of piles. The impacted pier's losing stability and its superstructure's excessive deformation are the main reasons leading to the progressive collapse of the continuous girder bridge.

Dynamic p-y curves for vertical and batter pile groups in liquefied sand

In this study,centrifuge model tests of vertical and batter pile groups in liquefied sand were conducted on a centrifuge shaking table.The dynamic p-y curves for these pile groups before and during sand liquefaction were obtained from calculations based on test data.The results confirm that liquefaction contributes to a reduction in the energy consumption of pile foundations,with the degradation effect being more pronounced for batter pile groups.At shallow depths,the difference in the backbone gradients of the p-y curves after liquefaction for vertical and batter pile groups indicates that the lateral stiffness of a batter pile group is greater than that of a vertical pile group.As shaking intensity increases,the lateral stiffness of a vertical pile group increases with depth during the late stage of sand liquefaction.However,the lateral stiffness of a batter pile group during liquefaction does not vary with depth.The results of this study provide a reference for the seismic design of vertical and batter pile groups in liquefied soil.

Parametric Study on the Effects of Pile Inclination Angle on the Response of Batter Piles in Offshore Jacket Platforms

Offshore jacket-type platforms are attached to the seabed by long batter piles. In this paper, results from a finite element analysis, verified against experimental data, are used to study the effect of the pile＇s inclination angle, and its interaction with the geometrical properties of the pile and the geotechnical characteristics of the surrounding soil on the behavior of the inclined piles supporting the jacket platforms. Results show that the inclination angle is one of the main parameters affecting the behavior of an offshore pile. We investigated the effect of the inclination angle on the maximum von Mises stress, maximum von Mises elastic strain, maximum displacement vector sum, maximum displacement in the horizontal direction, and maximum displacement in the vertical direction. Results indicate that the pile＇s operationally optimal degree of inclination is approximately 5°. By exceeding this value, the instability in the surrounding soil under applied loads grows extensively in all the geotechnical properties considered. Cohesive soils tend to display poorer results compared to grained soils.

Investigation on the Effect of Geometrical and Geotechnical Parameters on Elongated Offshore Piles Using Fuzzy Inference Systems

Among numerous offshore structures used in oil extraction, jacket platforms are still the most favorable ones in shallow waters. In such structures, log piles are used to pin the substructure of the platform to the seabed. The pile＇s geometrical and geotechnical properties are considered as the main parameters in designing these structures. In this study, ANSYS was used as the FE modeling software to study the geometrical and geotechnical properties of the offshore piles and their effects on supporting jacket platforms. For this purpose, the FE analysis has been done to provide the preliminary data for the fuzzy-logic post-process. The resulting data were implemented to create Fuzzy Inference System （FIS） classifications. The resultant data of the sensitivity analysis suggested that the orientation degree is the main factor in the pile＇s geometrical behavior because piles which had the optimal operational degree of about 5° arc more sustained. Finally, the results showed that the related fuzzified data supported the FE model and provided an insight for extended offshore pile designs.

NONLINEAR DYNAMICAL CHARACTERISTICS OF PILES UNDER HORIZONTAL VIBRATION

The pile-soil system is regarded as a visco-elastic half-space embedded pile. Based on the method of continuum mechanics, a nonlinear mathematical model of pile-soil interaction was established-a coupling nonlinear boundary value problem. Under the case of horizontal vibration, the nonlinearly dynamical characteristics of pile applying the axis force were studied in horizontal direction in frequency domain. The effects of parameters, especially the axis force on the stiffness were studied in detail. The numerical results suggest that it is possible that the pile applying an axis force will lose its stability. So,the effect of the axis force on the pile is considered.

Elastic solutions for partially embedded single piles subjected to simultaneous axial and lateral loading

In order to improve the design level of partially embedded single piles under simultaneous axial and lateral loads, the differential solutions were deduced, in which the soil was treated as an ideal, elastic, homogeneous, semi-infinite isotropic medium. A comparison was made between model test results and the obtained solutions to show their validity. The calculation results indicate that the horizontal displacement and bending moment of the pile increase with increases of the axial and lateral loads. The maximum horizontal displacement and bending moment decrease by 37.9% and 13.9%, respectively, when the elastic modulus of soil increases from 4 MPa to 20 MPa. The Poisson ratio of soil plays a marginal role in pile responses. There is a critical pile length under the ground, beyond which the pile behaves as though it was infinitely long. The presented solutions can make allowance for the continuous nature of soil, and if condition permits, they can approach exact ones.

主旋律电影与商业片的互动渐变规则

主旋律电影一直是中国电影生态中的强大一链 ,九十年代的主旋律电影依靠国家资源 ,又顺应时代潮流 ,主动进行意义的重新调度。商业片在禁忌与利益的考虑下 ,也向主旋律示好。因而 ,主旋律的“商业化”与商业片的“主旋律化”

KIN SP:A boundary element method based code for single pile kinematic bending in layered soil

In high seismicity areas, it is important to consider kinematic effects to properly design pile foundations.Kinematic effects are due to the interaction between pile and soil deformations induced by seismic waves. One of the effect is the arise of significant strains in weak soils that induce bending moments on piles. These moments can be significant in presence of a high stiffness contrast in a soil deposit. The single pile kinematic interaction problem is generally solved with beam on dynamic Winkler foundation approaches(BDWF) or using continuous models. In this work, a new boundary element method(BEM)based computer code(KIN SP) is presented where the kinematic analysis is preceded by a free-field response analysis. The analysis results of this method, in terms of bending moments at the pile-head and at the interface of a two-layered soil, are influenced by many factors including the soil-pile interface discretization. A parametric study is presented with the aim to suggest the minimum number of boundary elements to guarantee the accuracy of a BEM solution, for typical pile-soil relative stiffness values as a function of the pile diameter, the location of the interface of a two-layered soil and of the stiffness contrast. KIN SP results have been compared with simplified solutions in literature and with those obtained using a quasi-three-dimensional(3D) finite element code.

Comparative analysis of seismic response characteristics of pile-supported structure

In order to analyze the seismic response characteristics of pile-supported structure,a computational model considering pile-soil-structure interaction effect was established by finite element method.Then,numerical implementation was made in time domain.At the same time,a simplified approximation for seismic response analysis of pile-soil-structure system was briefly presented.Furthermore,comparative study was performed for an engineering example.Through comparative analysis,it is shown that the results obtained by the simplified method well agree with those achieved by the finite element method.These results show that spectrum characteristics and intensity of input earthquakes are two important factors that can notablely influence the seismic response characteristics of superstructure.When the input ground motion acceleration amplitude gradually increases from 1 to 4 m/s2,the acceleration of pier top will increase,but it will not be simply proportional to the increase of input acceleration amplitude.

《新闻评论》新型课堂实践教学形式探析

《新闻评论》课堂实践教学的重要性已被广泛认知,如何通过实践教学提高学生的实践技能,值得每位任课教师去思考。本文主要从如何创新《新闻评论》的课堂实践教学形式出发,提出在教学过程中采用"渐进式"、"交互式"、"共进式"三者并举的形式,培养学生的评论思维和水平,以期提高课堂实践教学效果。

Numerical simulation on behavior of pile foundations under cyclic axial loads

On the basis of the two dimensional finite element analysis model, the pile foundations' mechanical effect of the rigid pile composite foundation under the dynamic load was researched. Through the research, the development law and deformation property of axial force of pile body, shaft resistance of pile, and cumulative settlement of pile head under vertical cyclic dynamic loads were concluded. Through the comparison and analysis of the test results of dynamic models, the test results of Poulos(1989) and cumulative settlement model of the single pile under cyclic loads were confirmed. Based on the above research, Fortran language was adopted to introduce the soil attenuation factor, the secondary development of relevant modules of ABAQUS was carried out, and the effect of soil attenuation factor on dynamic property of pile-soil was discussed further.