A fatigue life prediction method of rolling bearing under elliptical contact elastohydrodynamic lubrication

In order to more accurately predict the contact fatigue life of rolling bearing, a prediction method of fatigue life of rolling bearing is proposed based on elastohydrodynamic lubrication （EHL）, the 3-paameter Weibull distribution ad fatigue strength. First,the contact stress considering elliptical EHL is obtained by mapping film pressure onto the Hertz zone. Then,the basic strength model of rolling bearing based on the 3-parameter Weibull distribution is deduced by the series connection reliability theory. Considering the effect of the type of stress, variation of shape and fuctuation of load, the mathematical models of the 尸 -tS-TV curve of the minimum life and the characteristic life for rolling bearing are established, respectively, and thus the prediction model of fatigue life of rolling bearing based on the 3-paameter Weibull distribution and fatigue strength is further deduced. Finally, the contact fatigue life obtained by the proposed method ad the latest international standard （IS0281： 2007） about the fatigue life prediction of rolling bearing are compared with those obtained by the statistical method. Results show that the proposed prediction method is effective and its relative error is smaier than that of the latest international standard （IS0281： 2007） with reliability R 〉 0. 93.

Surface quality of cold rolling aluminum strips under lubrication condition

The effects of oil film on the rolled surface, including surface roughness and topography, were investigated during cold rolling of aluminum strips. Various mineral oils with viscosities from 0.10 to 1.6 Pa.s were used to obtain different oil film thicknesses. Results from experiment and calculation show that the thicker oil film protects the initial roughening surface so that it leads to an increase in roughness of the rolled surface, in particular when the surface roughness has the character of direction. The rolled surface roughness was determined by 2, which is the ratio of oil film thickness to the combined surface roughness. When 2 〉 3, the rolled surface roughness increases rapidly with the increase in oil viscosity, whereas the surface roughening has already occurred when 2 〈 3, but the increase of the rolled surface roughness with increasing viscosity is not distinct.

DEVELOPMENT OF A NEW GENERATION OF ADDITIVES FOR ALUMINIUM ROLLING LUBRICATION

ＤＥＶＥＬＯＰＭＥＮＴＯＦＡＮＥＷＧＥＮＥＲＡＴＩＯＮＯＦＡＤＤＩＴＩＶＥＳＦＯＲＡＬＵＭＩＮＩＵＭＲＯＬＬＩＮＧＬＵＢＲＩＣＡＴＩＯＮＭａｏＤａｈｅｎｇ；ＸｉａｏＧａｎｇ；ＭａＷｅｎｈｏｎｇ（ＣｏｌｌｅｇｅｏｆＥｌｅｃｔｒｏ－ｍｅｃｈａｎｉｃａｌＥ...

Lubrication in strip cold rolling process

A lubrication model was developed for explaining how to form an oil film inthe deformation zone, predicting the film thickness and determining the characteristics oflubrication in the strip rolling process, combined with the knowledge of hydrodynamic lubricationand rolling theories. Various mineral oils with viscosities from 0.032 to 1.6 Pa-s were used toobtain different film thicknesses in the strip cold rolling. Results from the experiment andcalculation show that the oil film forming in hydrodynamic lubrication is up to the bit angle and ahigher rolling speed or a higher rolling oil viscosity. The mechanism of mechanical entrainmentalways affects the film thickness that increases with the rolling oil viscosity increasing or thereduction rate decreasing in rolling.

Effects of Corrosion Inhibitors on Lubrication Performance of Rolling Oil for Copper Foil

The 2,5-bis（ethyldisulfanyl）-l,3,4-thiadiazole （T561）, benzotriazole （BTA）,1-N, N-bis （2-ethylhexyl） aminomethyl-4-methyl-lh-benzotriazole （IRGAMET39） and I-IN, N-bis （2-ethylhexyl） aminomethyl] methyl benzotriazole （TT- LX） have been evaluated as corrosion inhibitors used in rolling oil for cold rolling of copper foil. The MRS-10A four-ball friction and wear tests have been carried out to compare their tribological properties, and the lubricating performance of rolling oils has been studied through rolling experiments. The oil sample containing IRGAMET 39 has the same PB value as that one containing T561, with the coefficient of friction increased by 35.6% and wear scar diameter decreased by 4%. The minimum rolling gauge has been studied after rolling lubrication, but the results show that inhibitors have no effect on it. Scanning electron microscopy （SEM） and energy dispersive spectrometry （EDS） analyses have indicated that the inhibitor is adsorbed on the copper surface to prevent copper from being corroded easily. In addition, the LEXT OLS4000 laser confocal microscopy has been used to observe the foil surface which shows that the streaks of foil surface are clear, the scratches are shallow and the surface failure is improved effectively.

Parametric analysis of mixed lubrication characteristics in work zone of strip rolling

A theoretical model for mixed lubrication with more accurate contact length has been developed based on the average volume flow model and asperity flattening model,and the lubricant volume flow rate and outlet speed ratio are determined by integrating differential equations based on rolling parameters.The lubrication characteristics at the roll-strip interface with different surface roughness,rolling speed,reduction and lubricant viscosity are analyzed respectively.Additionally,the average volume flow rates of lubricant under different rolling conditions are calculated and used to explain the change rule of lubrication characteristics.The developed scheme is able to determine the total pressure,lubricant pressure,film thickness and real contact area at any point within the work zone.The prediction and analysis of mixed lubrication characteristics at the interface is meaningful to better control the surface quality and optimize the rolling process.

Achieving oxidation protection effect for strips hot rolling via Al_(2)O_(3) nanofluid lubrication

It was discovered the application of Al_(2)O_(3) nanofluid as lubricant for steel hot rolling could synchronously achieve oxidation protection of strips surface.The underlying mechanism was investigated through hot rolling tests and molecular dynamics (MD) simulations.The employment of Al_(2)O_(3) nanoparticles contributed to significant enhancement in the lubrication performance of lubricant.The rolled strip exhibited the best surface topography that the roughness reached lowest with the sparsest surface defects.Besides,the oxide scale generated on steel surface was also thinner,and the ratio of Fe_(2)O_(3) among various iron oxides became lower.It was revealed the above oxidation protection effect of Al_(2)O_(3) nanofluid was attributed to the deposition of nanoparticles on metal surface during hot rolling.A protective layer in the thickness of about 193 nm was formed to prevent the direct contact between steel matrix and atmosphere,which was mainly composed of Al_(2)O_(3) and sintered organic molecules.MD simulations confirmed the diffusion of O_(2) and H_(2)O could be blocked by the Al_(2)O_(3) layer through physical absorption and penetration barrier effect.

Characteristics of unsteady lubrication film in metal-forming process with dynamic roll gap

Based on the theory of unsteady hydrodynamic lubrication and relevant mathematic and physical methods, a basic model was developed to analyze the unsteady lubrication film thickness, pressure stress and friction stress in the work zone in strip rolling. The distribution of pressure stress and friction stress in the work zone was obtained. A numerical simulation was made on a 1850 cold rolling mill. The influence of back tension stress and reduction on the distribution of pressure stress and friction stress between the roll gaps was qualitatively analyzed by numerical simulation. The calculated results indicate that the higher the back tension, the lower the pressure stress and the friction stress in the work zone, and the largest friction stresses are obtained at the inlet and outlet edges. The pressure and friction gradients are rather small at high back tension. The pressure-sensitive lubricant viscosity increases exponentially with the increase of pressure. The unsteady lubrication phenomenon in the roll bite is successfully demonstrated.

Lubrication characteristics of cycloid pin wheel transmission of RV reducer

In order to analyze the lubricating characteristics at different meshing points in the cycloid pin wheel transmission process,the cycloid gear teeth were discretized,combined with the kinematic analysis of the cycloid pin gear transmission and the contact analysis of the gear teeth.The progressive mesh densification method(PMD)was used to numerically solve the film thickness.The influence of the design parameters and process parameters on the lubrication characteristics was analyzed.The elastohydrodynamic lubrication and mixed lubrication characteristics at different contact points were obtained.The optimal meshing area of the cycloid gear tooth was determined,and the film thickness ratio,contact load ratio,maximum contact pressure at different points,average film thickness and roughness after contact deformation were analyzed.The conclusion of this study provides effective guidance for the research on the modification of cycloid gear teeth.

Influence of Lubrication Performance on the Service Life of Rolling Mill Bearings

In order to confirm the early failure cause of a four-row cylindrical roller bearing at the backup roll position of a six-high cold sheet mill, its lubrication behavior under harsh operating conditions is investigated. Through establishing and solving the Elastohydrodynamic Lubrication （EHL） model of the roller-inner raceway contact region, the minimum oil film thickness and the real lubrication performance are achieved. The results show the bearing failures come from the poor oil film thickness in the case of high temperature and low rotational speed, which leads to contact wear. So various approaches to improve bearing life via improving lubrication are compared. It has been proved decreasing surface roughness of both contact bodies is an effective way.

A new cold rolling lubrication method combining emulsion and neat oil lubrication

The cooling and lubrication process is one of the key processes in cold rolling,as it not only determines surface quality and strip shape,but also reduces the rolling power consumption and extends the life of the roll even during high-speed operation.In this study,an innovative method combining emulsion lubrication and neat oil lubrication was used to solve some problems associated with individual passes.Laboratory tests on stainless steel strips showed that this new lubrication method could improve the surface quality of the strip,control the rolling friction in the deformation zone,and has the potential of making lubrication systems simpler and easier to operate,all while reducing the negative environmental impact from emulsion processing.

Unsteady lubrication modeling of inlet zone in metal rolling processes

An unsteady lubrication model of inlet zone in metal rolling was established. The simulation computations show that for the variation amplitude of the inlet film thickness, the variation of the inlet angle contributes the largest, the surface mean speed contributes the second and the back tension stress the least. The higher the input frequency is, the smaller the amplitude output of the inlet film thickness will be. For a sinusoidal input, the inlet film thickness varies periodically but is not a sine wave because the system is not linear.

Application of rolling technique lubrication system of 2150 mm hot rolling line

In order to reduce the friction force between the roll and rolling material,decrease the rolling force and consumed power,enhance the product quality and rolling efficiency,rolling technique lubrication has been applied widely in mordern hot rolling mill at present.The constitution and control principle of rolling technique lubrication System of 2 150 Hot Rolling Line are analyzed.In light of the problems that took place while testing and applicating,the reformation measures are pointed out.Since taking measures,some good effect has been obtained,which ensure the technique lubrication system operating steadily.

EVALUATION OF LUBRICANTS FOR COLD ROLLING ALUMINUM STRIPS

Various kinds of base oils were applied to cold rolling aluminum strips on a test mill for evaluationof the influences of these base oils,aromatics contents and viscosity of base oils on their lubricating performances and surface reflectivity of rolled strips at annealing. Results showed that low friction coefficient androlling force were obtained by using the normal paraffins,whereas their contaminations on the annealed stripsurface were the same as those of other saturated hydrocarbons. Aromatics in base oil affected the stir face reflectivity of annealed strips, but the decrease of aromatics in base oil was ineffective to improve rolled stripssurface quality when it is less than 1 %. Base oil viscosity has the great influences on the lubricating performances and surface reflectivity of annealed strips just in this condition.

Research on the Relationship between Molecular Activity of Additives and Lubricating Performance of Aluminum Rolling Oil

In this paper,an ab initio,local density functional(LDF)method was used to explore the relationship between the molecular properties of additives and the lubricating performance of aluminum rolling oil.The structural properties of butyl stearate,dodecanol,docosanol,and methyl dodecanoate were studied according to the density functional theory.The calculated data showed that the atoms in or around the functional groups might be likely the reacting sites.Because of the different functional groups and structure of ester and alcohol,two types of complex additives,dodecanol and butyl stearate,methyl dodecanoate and butyl stearate,respectively,were chosen for studying their tribological properties and performing aluminum cold rolling experiments.The test results agreed with the calculated results very well.The complex ester,viz.methyl dodecanoate and butyl stearate,had the best lubricating performance with a friction coefficient of 0.084 1 and a permissive-rolling thickness of 0.040 mm as compared with that of dodecanol-butyl stearate-base oil formulation.

The Friction and Wear Properties of CrN, Graphit-iC and Dymon-iC Coatings in Air and under Oil-lubrication.

Hard ceramic coatings such as TiN and CrN are very successful and are widely used in improving the performance of cutting and forming tools, but they are less successful in providing protection for general machine components, such as gears and engine parts. The development of low-friction wear resistant coatings that can run dry or in a minimum amount of oil is becoming increasingly important to this industry. Two recently developed carbon-based coatings Graphit-iC? and Dymon-iC, which are shown to exhibit very high sliding wear resistance and low friction in dry conditions, are compared to a CrN coating under oil lubricated conditions. Long term pin-on-disc tests using a chrome steel counterface ball were carried out on coated HSS test samples. All the coatings performed well at very high applied contact pressures, exceeding 1.5 GPa, but the Graphit-iC? and Dymon-iC coatings also exhibited the desirable characteristic of protecting the counterface material. Reasons for this behaviour are discussed.

Development and Lubricating Properties of Rolling Oil for Stainless Steel Cold Rolling

Appropriate base oils and homologous additives such as extreme pressure and anti-wear agents,oiliness agents and antioxidants were selected,and experiments testing the compatibility performance between additive,base oil and other components were carried out to develop the SK and SD series of rolling oils for cold rolling of stainless steel.The developed oils were used in the stainless steel cold rolling lubrication experiments,and were successfully applied in the actual cold rolling operation of stainless steel.Compared with a foreign product,the tribological properties,the thermal oxidation stability,and the rolling lubrication performance of the developed stainless steel cold rolling oils were studied.Test results showed that the tribological properties of the thereby developed rolling oils and the reference one were almost at the same level,and to some extent the performance of rolling was even better than the foreign product,at the same time the stainless steel sheet could retain its well annealed performance.Meanwhile,within a certain range,the lubrication of the rolling oil became better as its viscosity increased at the same level of saponification value,which could provide a lower friction coefficient,so that a higher maximum reduction ratio of the rolled piece through a constant roll gap and a minimum thickness could be secured.Also,similar phenomena appeared as the saponification value increased at a same viscosity level of the rolling oils.

Friction Characteristics of Space Lubricating Oil No.4129 in Rolling and Sliding Contact

The friction coefficients between the surfaces of a ball and a disc lubricated by a space lubricating oil No.4129 were measured at various operating conditions on a ball-disc friction test rig. Friction characteristic curves were obtained under sliding and rolling movements at point contact. A new model for calculation of the friction coefficient was presented. The results show that the bigger the load is, the larger the friction coefficient becomes. The rolling speed ranging from 1 m/s to10 m/s has an important effect on the friction coefficient. The friction coefficient increases with the increase in sliding speed and the decrease in rolling speed. The linear variation region of the friction coefficient versus the sliding speed at high rolling speed is wider than that at low rolling speed. The model for calculation of the friction coefficient is accurate for engineering use.

Tribological Testing of Hemispherical Titanium Pin Lubricated by Novel Palm Oil:Evaluating Anti-Wear and Anti-Friction Properties

In this study, the properties of hip implant material and lubricants were examined using a pin on disc apparatus, to compare the effect of metal-on-metal （MoM） contact with a bio-lubricant derived from palm oil. The behaviour of the lubricants was observed during the experiments, in which a hemispherical pin was loaded against a rotating disc with a groove. A titanium alloy was used to modify the hemispherical pin and disc. Before and after the experiments, the weight and surface roughness were analysed, to detect any degradation. The results were compared according to the different kinematic viscosities. The wear rates and level of friction with each lubricant were also examined. The lubricant with the highest vis- cosity had the lowest frictional value. Therefore, develop- ing suitable lubricants has the potential to prolong the lifespan of prostheses or implants used in biomedical applications. The experiments collectively show that lubricants derived from palm oil could be used as efficient bio-lubricants in the future.

Theoretical analysis based on a modified mixed-film lubrication model for metal forming processes

An analytical model for metal rolling in the mixed lubrication regime was developed based on Wilson and Chang’s asperity flattening model and Von Mises homogenous deformation model. A more rigorous average Reynolds equation was used to calculate the hydrodynamic pressure. The variations of the yield stress with strain were considered in the model. An efficient iteration procedure was developed to solve the contact area, film thickness and hydrodynamic pressure. The model is more practical with fewer assumption and converges quickly. It is applicable to a wider range of rolling regimes. The calculation results using the model agree well with the literature as well as with measured data from a rolling mill.