In order to investigate the characteristics of particle-induced pressure loss in the solid–liquid lifting pipe,a series of experiments were conducted in 200 mm diameter lifting pipe.Simulation manganese nodules with ...In order to investigate the characteristics of particle-induced pressure loss in the solid–liquid lifting pipe,a series of experiments were conducted in 200 mm diameter lifting pipe.Simulation manganese nodules with five different mean diameters of10 mm,20 mm,30 mm,40 mm and 50 mm were used,both in isolation and a combination in equal fraction by mass.The flow velocities in the lifting pipe ranged from 0.12 m/s to 1.61 m/s,and the mass of particles employed was 10 kg for each particle diameter.Three regimes,wavy bed,partly fluidization,and fully fluidization,were observed over the flow velocity.The solid–liquid pressure drop data were measured by differential pressure transmitter,and pressure drop caused by the solid particles was calculated and analyzed.The results show that the evolutions of the pressure loss due to solid particles are relevant to the solid–liquid flow regimes,and they are distinctly influenced by fluid velocity and particle size.展开更多
Water hammer occurs whenever the fluid velocity in vertical lifting pipe systems for deep-sea mining suddenly changes. In this work, the shock wave was proven to play an important role in changing pressures and period...Water hammer occurs whenever the fluid velocity in vertical lifting pipe systems for deep-sea mining suddenly changes. In this work, the shock wave was proven to play an important role in changing pressures and periods, and mathematical and numerical modeling technology was presented for simulated transient pressure in the abnormal pump operation. As volume concentrations were taken into account of shock wave speed, the experiment results about the pressure-time history, discharge-time history and period for the lifting pipe system showed that： as its concentrations rose up, the maximum transient pressure went down, so did its discharges; when its volume concentrations increased gradually, the period numbers of pressure decay were getting less and less, and the corresponding shock wave speed decreased. These results have highly coincided with simulation results. The conclusions are important to design lifting transporting system to prevent water hammer in order to avoid potentially devastating consequences, such as damage to components and equipment and risks to personnel.展开更多
A flexible connector of lifting pipes in a deep sea mining system is designed. The buttress thread （ based on API standard） is used and foreign experience in connector design is referred to. With this kind of connec...A flexible connector of lifting pipes in a deep sea mining system is designed. The buttress thread （ based on API standard） is used and foreign experience in connector design is referred to. With this kind of connector, the lifting pipe wiU only bear the axial force, free of moment. The strength of the connector is analyzed in detail, including the connecting strength of the buttress thread, the dynamic load of the pipe system, pressures inside and outside of the pipe, the lateral stress of the pipe wall and so on. Especially, a geometric model is built for 3-D contact stress analysis. The distribution graph of contact stress is presented. It is indicated that the strength of the spherical connector meets the demand.展开更多
基金Projects(51174037,51339008)supported by the National Natural Science Foundation of China
文摘In order to investigate the characteristics of particle-induced pressure loss in the solid–liquid lifting pipe,a series of experiments were conducted in 200 mm diameter lifting pipe.Simulation manganese nodules with five different mean diameters of10 mm,20 mm,30 mm,40 mm and 50 mm were used,both in isolation and a combination in equal fraction by mass.The flow velocities in the lifting pipe ranged from 0.12 m/s to 1.61 m/s,and the mass of particles employed was 10 kg for each particle diameter.Three regimes,wavy bed,partly fluidization,and fully fluidization,were observed over the flow velocity.The solid–liquid pressure drop data were measured by differential pressure transmitter,and pressure drop caused by the solid particles was calculated and analyzed.The results show that the evolutions of the pressure loss due to solid particles are relevant to the solid–liquid flow regimes,and they are distinctly influenced by fluid velocity and particle size.
基金supported by the National Natural Science Foundation of China(Grant No.50875081)China Postdoctoral Science Foundation(Grant No.20080440992)+1 种基金the Planned Science and Technology Support Project of Hunan Province(Grant No.2009SK3159)Graduate Innovation Fund of Hunan University of Science and Technology(Grant No.S100109)
文摘Water hammer occurs whenever the fluid velocity in vertical lifting pipe systems for deep-sea mining suddenly changes. In this work, the shock wave was proven to play an important role in changing pressures and periods, and mathematical and numerical modeling technology was presented for simulated transient pressure in the abnormal pump operation. As volume concentrations were taken into account of shock wave speed, the experiment results about the pressure-time history, discharge-time history and period for the lifting pipe system showed that： as its concentrations rose up, the maximum transient pressure went down, so did its discharges; when its volume concentrations increased gradually, the period numbers of pressure decay were getting less and less, and the corresponding shock wave speed decreased. These results have highly coincided with simulation results. The conclusions are important to design lifting transporting system to prevent water hammer in order to avoid potentially devastating consequences, such as damage to components and equipment and risks to personnel.
基金This research was financially supported by China Ocean Mineral Resources R &D Association (Grant No. DY105-03-02-17) .
文摘A flexible connector of lifting pipes in a deep sea mining system is designed. The buttress thread （ based on API standard） is used and foreign experience in connector design is referred to. With this kind of connector, the lifting pipe wiU only bear the axial force, free of moment. The strength of the connector is analyzed in detail, including the connecting strength of the buttress thread, the dynamic load of the pipe system, pressures inside and outside of the pipe, the lateral stress of the pipe wall and so on. Especially, a geometric model is built for 3-D contact stress analysis. The distribution graph of contact stress is presented. It is indicated that the strength of the spherical connector meets the demand.
