Based on the pipe transportation of paste-like backfilling system of a certain deep coal mine,its dynamics process was simulated and analyzed.A two-dimensional dynamic model of extraordinary deep and lone pipe was bui...Based on the pipe transportation of paste-like backfilling system of a certain deep coal mine,its dynamics process was simulated and analyzed.A two-dimensional dynamic model of extraordinary deep and lone pipe was built by GAMBIT,on the basis of which the simulation was done by implicit solver of FLUENT 2ddp.The results show that hydraulic loss of pipe transportation is less than the pressure produced by gravity,which means the backfilling material can flow by itself.When the inlet velocity is 3.2 m/s,the maximum velocity of 4.10 m/s is at the elbow and the maximum velocity in the horizontal pipe is 3.91 m/s,which can both meet the stability requirement.The results of the simulation are proved to be reliable by the residual monitor plotting of related parameter,so it can be concluded that the system of pipe transportation is safe.展开更多
In the hydraulic transporting process of cutter-suction mining natural gas hydrate, when the temperature-pressure equilibrium of gas hydrate is broken, gas hydrates dissociate into gas. As a result, solid-liquid two-p...In the hydraulic transporting process of cutter-suction mining natural gas hydrate, when the temperature-pressure equilibrium of gas hydrate is broken, gas hydrates dissociate into gas. As a result, solid-liquid two-phase flow(hydrate and water) transforms into gas-solid-liquid three-phase flow(methane, hydrate and water) inside the pipeline. The Euler model and CFD-PBM model were used to simulate gas-solid-liquid three-phase flow. Numerical simulation results show that the gas and solid phase gradually accumulate to the center of the pipe. Flow velocity decreases from center to boundary of the pipe along the radial direction. Comparison of numerical simulation results of two models reveals that the flow state simulated by CFD-PBM model is more uniform than that simulated by Euler model, and the main behavior of the bubble is small bubbles coalescence to large one. Comparison of numerical simulation and experimental investigation shows that the values of flow velocity and gas fraction in CFD-PBM model agree with experimental data better than those in Euler model. The proposed PBM model provides a more accurate and effective way to estimate three-phase flow state of transporting gas hydrate within the submarine pipeline.展开更多
Water hammer occurs whenever the fluid velocity in vertical lifting pipe systems for deep-sea mining suddenly changes. In this work, the shock wave was proven to play an important role in changing pressures and period...Water hammer occurs whenever the fluid velocity in vertical lifting pipe systems for deep-sea mining suddenly changes. In this work, the shock wave was proven to play an important role in changing pressures and periods, and mathematical and numerical modeling technology was presented for simulated transient pressure in the abnormal pump operation. As volume concentrations were taken into account of shock wave speed, the experiment results about the pressure-time history, discharge-time history and period for the lifting pipe system showed that： as its concentrations rose up, the maximum transient pressure went down, so did its discharges; when its volume concentrations increased gradually, the period numbers of pressure decay were getting less and less, and the corresponding shock wave speed decreased. These results have highly coincided with simulation results. The conclusions are important to design lifting transporting system to prevent water hammer in order to avoid potentially devastating consequences, such as damage to components and equipment and risks to personnel.展开更多
The oil steel pipe in the petroleum industry is very important for its high price, large consumption volume and great effect on the development of petroleum industry. The oil steel pipe mainly includes oil well pipe (...The oil steel pipe in the petroleum industry is very important for its high price, large consumption volume and great effect on the development of petroleum industry. The oil steel pipe mainly includes oil well pipe (drill pipe, drill collar, casing and tubing etc.) and oil-gas transportation pipe. This paper is an attempt to make a comprehensive review on the current situation and prospect of the oil steel pipe in China, presenting the past , today and future of the China oil pipe. The first section is a historical review of the China oil pipe. The developing course and progress of the oil steel pipe products are presented. The second section is about the current situation of the China oil pipe. The general situation of the China’s steel pipe corporation and their products types, capability, etc. is introduced. The third section is about the prospect of the China oil pipe. This part mainly describes the new product research and development in China steel pipe corporations, which are facing more and more strict technical requirements of the petroleum industry in oil pipe, and reveals the prosperity of China’s steel pipe corporations.展开更多
Based on the former research work of the authors,the resistance of differentsolid particle suspension flow in a vertical pipe is analysed,and investigatedexperimentally.The applicable formulas of pressure drop are pre...Based on the former research work of the authors,the resistance of differentsolid particle suspension flow in a vertical pipe is analysed,and investigatedexperimentally.The applicable formulas of pressure drop are presented.Two types of par-ticles,talcum powder and glass beads,are convcyed in the test which has been carried outat various air vclocities of 10 to 28 m/s and at the ratio of solids-air mass flow rateranged from 0 to 2.The experimental results show a good agreement with the calculatedones.展开更多
This paper introduced the research and development of large-diameter SSAW pipes applied to West-East Pipeline project as well as domestic acicular ferrite pipeline steel of X70 grade. Its microstructure analysis was p...This paper introduced the research and development of large-diameter SSAW pipes applied to West-East Pipeline project as well as domestic acicular ferrite pipeline steel of X70 grade. Its microstructure analysis was performed in comparison with the pipeline steel of a foreign steel plant (SPC). This paper introduced the research of welding procedures prior to SSAW pipe making and some new procedures and technologies used for West-East Pipeline Project, and appraised the practical level of Large-diameter SSAW pipe applied to the West-East Pipeline Project.展开更多
基金Project(2008BAB32B03) supported by the National Science and Technology Pillar Program during the 11th Five-year Plan Period of China
文摘Based on the pipe transportation of paste-like backfilling system of a certain deep coal mine,its dynamics process was simulated and analyzed.A two-dimensional dynamic model of extraordinary deep and lone pipe was built by GAMBIT,on the basis of which the simulation was done by implicit solver of FLUENT 2ddp.The results show that hydraulic loss of pipe transportation is less than the pressure produced by gravity,which means the backfilling material can flow by itself.When the inlet velocity is 3.2 m/s,the maximum velocity of 4.10 m/s is at the elbow and the maximum velocity in the horizontal pipe is 3.91 m/s,which can both meet the stability requirement.The results of the simulation are proved to be reliable by the residual monitor plotting of related parameter,so it can be concluded that the system of pipe transportation is safe.
基金Project(51375498) supported by the National Natural Science Foundation of China
文摘In the hydraulic transporting process of cutter-suction mining natural gas hydrate, when the temperature-pressure equilibrium of gas hydrate is broken, gas hydrates dissociate into gas. As a result, solid-liquid two-phase flow(hydrate and water) transforms into gas-solid-liquid three-phase flow(methane, hydrate and water) inside the pipeline. The Euler model and CFD-PBM model were used to simulate gas-solid-liquid three-phase flow. Numerical simulation results show that the gas and solid phase gradually accumulate to the center of the pipe. Flow velocity decreases from center to boundary of the pipe along the radial direction. Comparison of numerical simulation results of two models reveals that the flow state simulated by CFD-PBM model is more uniform than that simulated by Euler model, and the main behavior of the bubble is small bubbles coalescence to large one. Comparison of numerical simulation and experimental investigation shows that the values of flow velocity and gas fraction in CFD-PBM model agree with experimental data better than those in Euler model. The proposed PBM model provides a more accurate and effective way to estimate three-phase flow state of transporting gas hydrate within the submarine pipeline.
基金supported by the National Natural Science Foundation of China(Grant No.50875081)China Postdoctoral Science Foundation(Grant No.20080440992)+1 种基金the Planned Science and Technology Support Project of Hunan Province(Grant No.2009SK3159)Graduate Innovation Fund of Hunan University of Science and Technology(Grant No.S100109)
文摘Water hammer occurs whenever the fluid velocity in vertical lifting pipe systems for deep-sea mining suddenly changes. In this work, the shock wave was proven to play an important role in changing pressures and periods, and mathematical and numerical modeling technology was presented for simulated transient pressure in the abnormal pump operation. As volume concentrations were taken into account of shock wave speed, the experiment results about the pressure-time history, discharge-time history and period for the lifting pipe system showed that： as its concentrations rose up, the maximum transient pressure went down, so did its discharges; when its volume concentrations increased gradually, the period numbers of pressure decay were getting less and less, and the corresponding shock wave speed decreased. These results have highly coincided with simulation results. The conclusions are important to design lifting transporting system to prevent water hammer in order to avoid potentially devastating consequences, such as damage to components and equipment and risks to personnel.
文摘The oil steel pipe in the petroleum industry is very important for its high price, large consumption volume and great effect on the development of petroleum industry. The oil steel pipe mainly includes oil well pipe (drill pipe, drill collar, casing and tubing etc.) and oil-gas transportation pipe. This paper is an attempt to make a comprehensive review on the current situation and prospect of the oil steel pipe in China, presenting the past , today and future of the China oil pipe. The first section is a historical review of the China oil pipe. The developing course and progress of the oil steel pipe products are presented. The second section is about the current situation of the China oil pipe. The general situation of the China’s steel pipe corporation and their products types, capability, etc. is introduced. The third section is about the prospect of the China oil pipe. This part mainly describes the new product research and development in China steel pipe corporations, which are facing more and more strict technical requirements of the petroleum industry in oil pipe, and reveals the prosperity of China’s steel pipe corporations.
文摘Based on the former research work of the authors,the resistance of differentsolid particle suspension flow in a vertical pipe is analysed,and investigatedexperimentally.The applicable formulas of pressure drop are presented.Two types of par-ticles,talcum powder and glass beads,are convcyed in the test which has been carried outat various air vclocities of 10 to 28 m/s and at the ratio of solids-air mass flow rateranged from 0 to 2.The experimental results show a good agreement with the calculatedones.
文摘This paper introduced the research and development of large-diameter SSAW pipes applied to West-East Pipeline project as well as domestic acicular ferrite pipeline steel of X70 grade. Its microstructure analysis was performed in comparison with the pipeline steel of a foreign steel plant (SPC). This paper introduced the research of welding procedures prior to SSAW pipe making and some new procedures and technologies used for West-East Pipeline Project, and appraised the practical level of Large-diameter SSAW pipe applied to the West-East Pipeline Project.
