DYNAMIC DESIGN OF VARIABLE SPEED PLANAR LINKAGES

A method for improving dynamic characteristics of planar linkages by activelyvarying the speed function of the input link is presented. Design criteria and constraints for thedynamic design of variable speed planar linkages are developed. Both analytical and optimizationapproaches for determining suitable input speed functions to minimize the driving torque, theshaking moment, or both simultaneously of planar linkages, subject to various design requirementsand constraints, are derived. Finally, some examples are given to illustrate the design procedureand to verify its feasibility.

Modeling and Optimal Design of Planar Linkage Mechanism of Coupled Joint Clearances for Manufacturing

The uncertainty of the mechanism motion error is mostly caused by the manufacturing process,so the motion error cannot be effectively predicted at the design phase.The problems of manufacturing complexity and the relationship between design and manufacturing are analyzed,and the influence of dimensional tolerance and fit tolerance on the motion accuracy of the system is considered in the design process.Then based on the Monte Carlo simulation,an optimal design model of planar linkage mechanism is set up.A typical offset slider-crank mechanism is used as an illustrative example to carry out the optimal design.Compared with the result of typical robustness design,the similar variation characteristics of the mean value and the standard deviation can be found,so the proposed method is effective.The method is furthermore applied in the optimization of the schemes with different fit tolerances and the prediction of motion errors in the design phase is achieved.A set of quantitative evaluation system for mechanism optimal design is provided.Finally,a basic strategy is presented to balance the motion precision and manufacturing cost.

SHAKING MOMENT BALANCING OF SPATIAL LINKAGES BY ADDING PLANAR CAMS

ＳＨＡＫＩＮＧＭＯＭＥＮＴＢＡＬＡＮＣＩＮＧＯＦＳＰＡＴＩＡＬＬＩＮＫＡＧＥＳＢＹＡＤＤＩＮＧＰＬＡＮＡＲＣＡＭＳＨａｎＪｉａｎｙｏｕ；（ＢｅｉｊｉｎｇＵｎｉｖｅｒｓｉｔｙｏｆＳｃｉｅｎｃｅａｎｄＴｅｃｈｎｏｌｏｇｙ）ＨｕａｎｇＺｈｅｎ（Ｙａｎｓｈａ...

Dynamics Response and Non⁃linear Characteristics Analysis of Complex Planar 2⁃DOF Mechanism with Revolute Clearances

There are clearances in mechanism because of manufacture and assembly error,which reduces operation life and working accuracy of mechanism and has a great impact on dynamical responses.At the moment,research in this area mainly focuses on single degree⁃of⁃freedom mechanism considering one clearance,while research of multi⁃DOF mechanism considering multi⁃clearance is less.With the purpose of studying the dynamical characteristics of complex multi⁃DOF mechanism with multi⁃clearances,a dynamic model was developed.The dynamic responses of 2⁃DOF mechanism with two clearances under different positions,values,and numbers of clearance were analyzed.The displacement,velocity,acceleration,collision force,and the axis trajectory at clearance were then given.In addition,there is a limited amount of literature on chaotic phenomena,which mainly focuses on the chaotic phenomena of end⁃effector of mechanism.But in this paper,the non⁃linear characteristics were analyzed by chaotic phenomenon of clearance joint,then chaotic phenomenon was identified by Poincarémappings and phase diagrams.Bifurcation diagrams were given.The results will offer a reliable technical support for the study of dynamical responses of planar mechanisms and the analysis of chaotic phenomena.

A Symbolic-Numerical Approach for theSynthesis of Planar Function Generators

Based on the geometrical relation between the relative pole and the rotationangles of links in the four-bar linkage, a third order algebraic equation withsingle variable for the closed form solution of planar function generators hasbeen derived by using computer symbolic manipulating technique. The newlydeveloped solution method eliminates the requirement of solving system ofnoulinear equations. All solutions of the problem can be obtained directly andeasily without the need of initial values. A numerical example is givendemonstratiap the efficiency and the advantages of this method.

Reconfigurable parallel mechanisms with planar five-bar metamorphic linkages

This paper presents the idea of constructing reconfigurable limbs by integrating metamorphic linkages as subchains.The planar five-bar metamorphic linkages that have three phases resulting from locking of motors are considered.Under the assumption that the constraint exerted by the reconfigurable limb can switch between no constraint,a constraint force,and a constraint couple,the output motions of the metamorphic linkage in its two planar four-bar linkage phases are identified.By adding an appropriate joint to planar four-bar linkages with translational output,four planar five-bar linkages that can be employed in the construction of reconfigurable limbs are enumerated.Serial chains that can provide a constraint couple and a constraint force are synthesized based on screw theory.Reconfigurable limbs that have three configurations associated with the three distinct phases of the metamorphic linkages are assembled with planar five-bar metamorphic linkages and serial chains with four degrees of freedom.A class of reconfigurable parallel mechanisms are constructed by connecting a moving platform and a base with three identical reconfigurable limbs.The degrees of freedom of the reconfigurable parallel mechanism in different configurations with the metamorphic linkages in different phases are given.Finally,the actuation scheme for this kind of mechanisms is addressed.